Changing the configuration profile to rolled-out iPads

I need to change the configuration profile of all the iPads that have been configured in my office due to a sudden request by the management. It's a simple checkbox that I can just tick off in iPhone Configuration Utility. However, how do I apply these changes to the iPads? Do I just update the config profile in the config utility, and it will update itself on plugging in the iPads, or do I have to do something else?
Thanks!

I don't think this will be a fun experience...if anyone knows of a better way I hope they will suggest it...but the profiles, to my knowledge, can not be incrementally updated...they have to be removed and replaced with a new profile.  We've found you can add a second profile as long as you do it from the same instance of IPCU that it was installed from ( if profile was encrypted), but I don't believe the 2nd profile will successfully install if it has settings that overlap or conflict with the profile installed first.  I've been told, and I believe that Apple is working on resolving issues like this that affect enterprise users.....if  a way exists to do this in IPCU with an incremental update, I'd like to know about it as well. 

Similar Messages

  • When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
    http://support.apple.com/kb/HT1808
    Hope this helps
    - Greg

  • Need log of the users who changed the partner profiles.

    Hi,
    Some user has been changed partner profiles of the CUA configuration Setup.
    It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
    It will be appreciate if anybody can help in this issue.
    Thanks,
    Shiva.

    I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
    Now its working fine.
    But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
    And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
    EDIPHO
    EDMSG
    EDP12
    EDP13
    EDP21
    EDPP1
    T002T
    T005T
    Regards,
    shiva.

  • HT204053 How can I change the iCloud id associated with my iPad?

    How can I change the iCloud ID associated with my iPad?

    To change the ID for:
    iMessage, go to Settings>Messages>Send & Receive, tap the ID sign out, sign back in using the other ID.
    FaceTime, do the same thing in Settings>FaceTime.
    iTunes, do this in Settings>iTunes & App Store.
    iCloud, start by saving your photo stream photos to your camera roll by opening your My Photo Stream album, tap Select, tap all the photos you want to save, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account and provide the password when prompted, then sign back in with the ID you want to use.  This will delete the account and iCloud data from your phone but not from iCloud.  Provided you are signing back into the same account and not changing to a new account, your data will be synced back to your phone when you sign back in.  However, if you are setting up a new account with a new ID, when you delete the account be sure to choose Keep on My iPad, then choose Merge when you sign into the new account to upload your data. 

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • How do change the default iTunes account on my iPad?

    How do change the default iTunes account on my iPad?

    You can log out of the currently logged in account by tapping on it Settings > Store, and then log in with the account that you want to use. Any content that was downloaded via the currently logged in account will remain tied to that account, so only that can re-download it or download updates to its apps.

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • How do I change the main iCloud account on my iPad?

    I need to change the main iCloud account on my iPad. I'm merging family MobileMe accounts' contacts, and need to set up multiple devices with the main iCloud family account so we will all share photos, contacts, calendars, etc, but have separate email via personal subaccounts. Trouble is I entered a sub account as the main account on one of the iPads and I can't find a way to change it.

    I have the same question for a slightly different reason.
    I just got an iPhone6 and set it up from an iPhone4 backup. I never really used that phone for iCloud, When iCloud first launched, I used an old earthlink email but I've since updated to a gmail address on my account.and use iCloud a lot on my iPad and laptop. But the new phone wants me to log in under the old earthlink account. I don't have that password and attempts to reset it have not worked. How can I switch the log in address so I can use the correct working address?

  • I have changed the configuration of the firefox and I want to change it back

    some days ago I have changed the configuration of the my Firefox to have a Firefox with higher speed. But after changing I found that the speed has became slower. I want to change the configuration back to its original setting. Please let me know if there is any way to do it.
    may tanks for your helps.
    MIMLINUX

    Start Firefox in [[Safe Mode]]. When you get to the [https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window Safe Mode window] , select '''Reset all user preferences to Firefox defaults''' and then '''Make Changes and Restart'''. You have to be very careful when a site tells you to change Firefox's settings. It may harm your Firefox.

  • How to change the color background in Pages for iPad?

    how to change the color background in Pages for iPad?

    You can find many themes at https://github.com/hdoria/xcode-themes  There's a download zip button on the right side of the page.
    Unzip and and copy the .dvtcolortheme files into /Users/YourUsername/Library/Developer/XCode/UserData/FontAndColorThemes Create the directory if it doesn't exist.
    If you can't find the Library directory you can get to it by using Finder's "Go to Folder..." option under "Go" or press shift + cmd + G then type the path.

  • How do I change the iMessage phone number on my iPad.

    Hello:
    I've searched and can't find this exact problem in any other thread. How do I change the iMessage phone nubmer on my iPad. It is NOT the same as my iTunes phone number.
    My wife and I share an AppleID. When I updated my iPad to iOS6 her phone number became my iMessage phone number. Now, I get all her iMessages between her and her contacts and not my own. The email is still my iTunes account email.

    If you go to General>Messages>ReceiveAt and then add an additional Apple ID, if you dont have an other Apple ID, you will have to create a new one. Also, if you dont want to receive your current messages, you can remove the number/Apple ID, but only if you have 2 or more Receiving accounts. (including your current) If you dont want to use iMessage at all, just simply switch iMessage from "On" to "Off"
    Hope this helped,
    From hamishryan6

  • How can I change the ICloud/ID Apple on my Ipad/IPhone?

    I've changed my Apple ID and I've changed the ID of Itunes on my IPad/IPhone.
    Now I want to change the IPad/IPhone ID on ICloud, but my IPad keep and store on my previous ID. How can I change the ICloud ID Apple on my Ipad/IPhone?

    Welcome to the Apple community.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • How do you change the font color in CALL-OUT text boxes in PRO XI?

    How do you change the font color in CALL-OUT text boxes in PRO XI?

    It's not so simple to find it if you don't know what you're looking for... But it can be found via View - Show/Hide - Toolbar Items - Properties Bar.

  • How can I change the settings for being timed out (I don't want to be timed out ever)

    How can I change the settings for being timed out (I don't want to be timed out ever)?

    I am sorry but this isn't something that you can set. The system has timeouts built into the code.
    Andrew

Maybe you are looking for

  • Home theater sound problems

    Sony STR-DE697 Receiver Samsung HDTV Bose Acoustimass 6 Series III speaker system I need help. System had worked normally. Then--- Right Front speaker went dead. Switched Center with Right. Speaker was OK. Figured it was receiver problem, but couldn'

  • Lose connection to router after iMac wakes up

    Ok, when my iMac is waking up after it has been asleep it loses its connection to the router (grayed out). I can turn it off, turn it on, select my network but it says it cannot establish a connection to base station. Then for some reason it starts t

  • Generating RTF/PDF/HTML

    Hi all Is it somehow possible to generate an RTF, PDF or HTML easily direct out of Java so that i can display my text and all other stuff like this, without using of a printer/printpreview - i don't want to make it like this it is easier to simply sh

  • Multi line pattern search with like

    Hi All, I am using oracle 9i. I want to search for multi - line pattern. for e.g. update tablename set columnname . I used select * from user_source where text like '%update tablename%set columnname%' but this only seem to work if update tablename se

  • View Report not working with CVI 9?

    Hi: We recently installed the CVI 9 run time engine on several of our stations. However, now we're seeing a problem where the 'View Report' button on the batch and parallel model result panels no longer work. If you try to view the report, the panel