Changing the configurations of pre-configured BOM on a Sales Order

Hello experts,
Our client's business is similar to OEC Computers. However, I am not able to map the following business scenario:
They sell servers to customers however, it is unusual that the client buys the pre-configured model as provided by the principal. therefore, as per the specific requirements of customer they change the configuration of the server.
For e.g. the pre-configured model has 2GB of RAM however, the customer wants to replace the the 2GB RAM with a 4GB RAM.
The replacement is important to track as Inventory will have an affect on it.
Please advise the possible solutions.
Regards

Hi Adeel,
At the time of Production order you chane the 4GB RAM Instead of 2GB.
Traking of the Replacement item you use some Additional query report to be use.
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

BOM Usage and Sales order BOM

Can some one bring our the difference between BOM usage in the creation of a material bom and a Sales order BOM - To be more specific, when you are creating a BOM using the tcode cs01, I get a field called BOM usage where I can select it as 5 and define it as relevant to Sales and Distribution. I can also create a BOM which is Sales order specific using CS61 tcode. what is the difference between the two? When will the bom created using CS61 explode and when will the other one explode?
Thanks for your reply in advance....

Hi
while using the material in each dept. the usage differs so for that sap provided this function. for sales bom is used only sales and also that material already exist in the plant. and mm bom the material has to procure from the some third party that all functionality will control throgh the maitaning bom usage.
further your explanation i give below info.
Text
BOM Usage
Definition
This key defines the area (such as engineering/design or production) where a BOM can be used.
Use
By setting various indicators, you can define the maximum configuration of the item status and define whether an item must be or cannot be processed in a particular area (such as production).
Examples
A material is used in the areas production and costing in a company. For each area, you maintain a separate BOM with different items:
Production BOM:
This BOM contains items that are relevant to production. These items are copied to the planned order. Dependent requirements are generated for them, and they are copied to the production order.
Costing BOM:
This BOM contains items that are relevant to determining the material costs of a product.
When you calculate production costs using a quantity structure, the system automatically determines the BOM and all the BOM items that are relevant to costing, in order to calculate manufacturing costs.
pls find the config table which will give u clear picture about bom usage.
STLAN     PMPFE     PMPKO     PMPKA     PMPRV     PMPVS     PMPIN     PMPER     ANTXT
1     +     .     .     -     -     -     .     Production
2     .     +     .     -     -     -     .     Engineering/Design
3     .     .     .     .     -     -     .     Universal
4     -     -     .     -     -     +     .     Plant Maintenance
5     .     .     +     +     -     -     .     Sales and Distribution
6     .     .     +     .     -     -     .     Costing
7     .     -     .     .     -     -     -     Empties
8     -     .     -     -     -     -     -     Stability Study
M     .     .     .     .     -     .     .     External Munitions Display
Z     +     .     +     +     -     -     .     Rebranding Sales BOM (1:1)
Thanks
Regards
Hari Shankar

Changing the label of attributes configured on User Profile by SAP HRMS connector

Is it possible to change the label of attributes configured on User Profile by SAP HRMS connector during the installation?

You can modify the connector xml before you install the connector or try this: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/uicust.htm#BABDEGFE
-Bikash

Wat is the procedure to make a release strategy in sales order ?

wat is the procedure to make a release strategy in sales order ?

Dear all:
my request is :
when the sales order are saved(VA01) and it is not approved ,it can't make to MD04,
if the sales order is approved,then can make to MD04.
I user Status Profile to do it,
I have set a user Status Profile in sales order header and item by BS02, in the user Status Profile i have two status A00 and B00,I need a business transaction to set in the status A00 ,
but i don't know which business transaction can settle my problem.
Acct. assignment order/project
Activate final billing doc.
Actual activity allocation
Actual overhead (periodic)
Actual settlement
Automat. WIP/results analysis
Change configuration data
Complete
Confirm order
Create billing document
Create changeable copy
Create delivery
Create inquiry
Create quotation
Create sales document

BOM Production in Sale Order

Hi all,
I have a finished good is ABC, strategy is 20 (make to order).
I have a variant for ABC, the quantity of components in ABC is 1 pc. When I create a Sale order, I have to choose some characterristics. It depend on requirement of customer. I can see cost estimate in cost report function of Sale Order and inform to customer. My question is "if I change the quantiy of component in ABC is 2 or 3 pc, the cost estimate will be change?"
If not? how i see the cost of order after change component in BOM.
Thanks all

Dear,
I have noy fully understood your question. What I understood is you have created Sales order and then you chnaged the BOM qty of sales order BOM. Will it chnage the cost estimation?
It depends. If you have chnaged the BOM after sales order is created, if you go for recost run, it may change. and you may get the correct cost.
Are you looking for this?
Raj

BOM explosion in sales order

Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
Emily

Hi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla

Change End date of billing plan/invoice plan in sales order item(fpla-erdat

Hi Experts,
Could you please help to me regarding this issue.
I need to change End date of billing plan/invoice plan in sales order item of "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
Thanks
jaya

Hi ramki,
I tried with using MASS T.code ( bus2032 Object type).
There are no field related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
now what i can do. or explain
Thanks
jaya

Net weight of the material is not copying from contract to sales order

net weight of the material is not copying from contract to sales order?
plz help me

Hi,
If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
Please check in the Contract whether the vales derived from Condition records are entered manually.
If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
Please maintain the CONDITION RECORDS and check whether they have copied or not
Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s D
Please check the above settings and let forum know the feedback.
regards,
santosh

Editor Mode not found to change the property of J2EE Configuration in NWA

Hi,
I have worked on an issue where an end user asked me to configure changes in NWA.But I did not find the editor mode.I tried all the buttons in the page of NetWeaver Administrator -> Configuration.But I could not change the customized value.Tried all possible means.Later logged into Config Tool and made the changes in Configuration Adapter successfully.Restarted the cluster later.
Why couldn't I change the value of property in NWA? Where do I see the configuration editor mode in NWA?Please help.
Thank You.
Regards,
Sudheer.

Hi Mr. Sudheer,
As per my information,
NWA is a tool under developement by SAP (for the full fledged functionality)
Till now it is valid for use to Monitor the SAP system (similar to CCMS), next is you can administrate the Java process and services (that is you can start and stop them).
WE can monitor the SAP ABAP & JAVA Stack as well as Java components...
We can also do User Management via NWA.
And also the CTC configuration using NWA.
But changing certain parameter or acting as an editor is NOT YET supported by NWA tool.
I hope that I am correct in providing you the information.
for details on that please refer : http://service.sap.com/nwa
Regards,
Prem
Message was edited by:
Premkishan Chourasia

Changing the fonts displayed in Configurator

Is there a way to change the fonts used by the runtime configurator. For example, I have a new font file (futura-bt-b.ttf) that I want to use with configurator. I want all the labels, header text, etc. to use this font. How do I install it into the server (location, etc.) and how do I map it to configurator application? Thanks in advance.

The Caption Style or Style setting indicates the style sheet definition you want to use to render the UI caption. For example, the style sheet BLAF.xss determines the font, size, and color of the text. This style sheet is located in the oa_html/cabo/styles directory. For information about personalizing style sheets, see the Oracle Applications Framework Release 11i Documentation Road Map (Metalink Note # 275880.1)
Thanks,
Vignesh R

Changing the default password when configuring.

Hi,
can anyone tell me how to change the default password and username when you are first configuring your router? You know when you go to http://192.168.1.1/?
I know the default password is admin and there is no user name but I would like to change that so that not just anyone who knows the default password can see the wep incryption I have in place. Please can someone help?

What router are you using?
On most Linksys routers, you cannot change the User Name. You must leave it blank.
To change the Password, login to the router, and go to the "Administration" tab. You should find the Password somewhere nearby.

Configurable Material as BOM component in SALES Order BOM

Hi Gurus
I have following
1. Material ABC is a configurable material (variant)
2. BOM of this ABC has further configurable materials
Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
If yes, how. please explain.
Thanks in advance
sunil

Dear Sunil,
Please refer to the following link:
http://sap-img.com/sap-sd/sales-bom-implementation.htm
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

BOM explosion in sales order for configurable materials and variants

Hi,
I have these materials:
A: configurable material (header)
B: variant material (header)
C: configurable material 1 (position)
D: configurable material 2 (position)
E:variant material 1 (position)
F:variant material 2 (position)
I can in the sales order explode in this way the BOM (using SD01 application in the position type of the header material):
1) A --> C+D
2) B --> E+F
while I can't make the explosion in this way: A --> EF and A --> CE
is this possibile? I want to make an explosion of a BOM for a configurable material and having variants material as sons, or having mix sons (one configurable and one variant)
Thank you
Sandra

Hi Sandara,
Just check the BOM in cs03 u have maintained !!! If u have maintain the variant material there in the config mat BOM with object dependencies than u can explode !!!!
Please let me knwo if u any query and also if u elabore more than will help u out

BOM explosion in sales order in variant configuration?

Hi All,
After searching all threads iam posting this .
My requirement is
In sales order the material(ZDESKTOP) which has been created in KMAT with item caragery gruop 0002(Configuration) has compenents like PROCESSESOR,DRIVE,KEYBOARD,STORAGE,MEMORY,etc where again each components have 3 varieties(values).while creating sales order the components and picking of values is running well.THE GREEN LIGHT IS ON IN VARIANT CONDITIONS.pricing is picking for variant conditins(values)
These values are stockable items which i created as semifinished.
item catagery TAC is determined.
Now my problem is the values(sub-items) which are attracted pricing should reflect as sub items of ZDESKTOP.
I have created a BOM also for ZDESKTOP.
I HAVE GET ONLY THE PRICED VALUES AS SUB-ITEMS.
HOW TO DO THIS SCENARIO?
Need Help.
Regards,
Reddyy
Edited by: REDDYY SD on Feb 4, 2009 12:51 PM

Hi
check your Item category group in material master , sales org view, if it is 0002 Configuration this material use for varient configuration, but your case it may be LUMF (Structure/mat. below) it used for sub item price.
It is , one of the reason.
Regards
Paulraj.S

When viewing a pdf document how do I change the default or pre-set magnification?

Anytime I am directed to a pdf document by a website it opens the pdf file at 173% magnification. It tells you to open the menu to change the pre-set magnification, but I don't see a menu to open.

Maybe you did not include enough information in your question or your question was not specific enough since your reply indicates that you have already asked the question and have received an unsatisfactory answer. Please attach a screen shot demonstrating the magnification. Also include written information about where you are seeing the 173% or other magnification value that you are seeing on the image that you attach.
'''Posting a screenshot'''
*http://en.wikipedia.org/wiki/Screenshot
*Windows: http://www.wikihow.com/Take-a-Screenshot-in-Microsoft-Windows
*Windows 7: http://www.sevenforums.com/tutorials/9717-screenshot-paint.html
*MAC: http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X
*See: https://support.mozilla.com/en-US/kb/Adding+screenshots
Save the file as a .png or .jpg image to your hard drive. When you reply, click in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive. NOTE: If you use "Preview" before "Submit", the screenshot will not attach; you must repeat the process of clicking in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive.
'''Also see these Firefox extensions:'''
*Abduction!: https://addons.mozilla.org/firefox/addon/3408
*FireShot: https://addons.mozilla.org/firefox/addon/5648
*Screenshot Pimp: https://addons.mozilla.org/firefox/addon/12985
*Screengrab: https://addons.mozilla.org/firefox/addon/1146

Changing the configurations of pre-configured BOM on a Sales Order

Similar Messages

Maybe you are looking for