Changing the customer screen tab name in transaction co02

I have done a exit in transaction CO02.Added one tabstrip in the screen.Its named as customer screen there.How to change this name.please provide with steps.

Hi
I'm working on 46C and ECC 6.00: it works fine in the both realeses.
So I suppose it'll have to work on 470
I run SMOD trx (no CMOD)
Insert PPCO0012 and press TEST icon
Doubleclick on line Exit Menu
A popup is shown and here I can change the description and the icon for function +COI
That's all.
If you're getting the error "Non-existent components: Menu option SAPLCOCU+COI", try to check the sap note 626530
Max

Similar Messages

How to Change the customer subscreen tab text in maintanance order ?

Hi all,
I have implemented a screen-exit for maintanance order using IWO10018. it is working fine but the tab text of the added screen is ENHANCEMENT. I tried to change it by creating the text symbols in the program with the screen . But still it is not changing.
Please help me to solve the issue?
Thanks,
Aravind.

Refer:
Re: Change tab strip name for ME52N transaction
How to change the name of Customer Tab strip .
Rename Custom tab in IW31 transaction
Check whether you can maintain the tab page title here
transaction spro-investment management-Appropriation requests-control data-specify tab layout for Appropriation reuqests

How to change enhancement tab name iw33 transaction

Hi,
I have created one custom enhancement tab in iw33 transaction,but i have to change name for enhancement tab.
Can you pls suggest me.
Best Regards,
Babu

Hi
There is a OSS note 1340615 for the same.
I just copied the same from market place.
Follow the steps to make the change if the changes can't be downloaded auotomatically.
1. Start the transaction SE51.
2. Give program as SAPLCOIH and screen as 1100. Select the radio button (option) 'Element List'.
3. Click on the change button.
4. In general attr. for the field 'BTN_PLUS_CUK' change the column 'Vislg' from the value '10' to '13'
5. Save and activate.
6. Go back to initial screen of the SE51 transaction.
7. Give program as SAPLCOIH and screen as 1205. Select the radio button (option) 'Element List'.
8. Click on the change button.
9. In general attr. for the field 'BTN_VGD5' change the column 'Vislg' from the value '10' to '13'
10. Save and activate.
Shiva

User exists for changing the selection screen of the transaction CS11

Hi,
I want to change the selection screen of the transaction cs11 and modify the ALV output.
I searched the old forums but not got satisfactry results.
I want to change the plant and material from the parameter to the select option.
i dont want to copy the transaction for the zcs11.
any suggestion on this ?
Regards,
udupi

one more requirement i have is that, i need to remove all the header fields such as material , plant etc and place that field in the item level. i can use the user exists PCSD0002 for the adding the customer field in the item. but how can i removed the header level field such as plant and material. whether we have any user exits for that?

Identifying changes in the custom screen added to Delivery

Hello,
I have added a custom screen in delivery transaction(VL02n) at header level. I used BADI LE_SHP_TAB_CUST_HEAD to do that. Now if user comes and enters some data on the custom screen, then goes to menu option Subsequent processing-->Create Transfer Order, user is not prompted with a pop up screen to save changes.
It happens with SAP Standard screens for any data changes. How do we achieve the same functionality to prompt a popup message for any changes in the custom screen and save the data?
Thanks
Anil

Hi Appana,
Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
Thanks
Anil

XD02 transaction to change the customer data for updating KNA1 table?

Hi all,
How can we use XD02 transaction to change the customer data for updating KNA1 table?
Give the steps.
Thanks in advance
rk

Hi KR,
Why don't u use BDC to run XD02.
With Regards,
Zafar Ali

What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Dear All,
Revision: 11.5.10.2
We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
Thanks,
Helen

Hi Helen-Oracle
As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
Thanks
Mirza Tanzeel

Adding the customer screen to enhance the header for Enjoy PO

Dear Expert's,
My requirement is to add a new tab on Header for Enjoy PO by enhancing ME21N/ME22N and ME23N.
I have already implemented the BADI's ME_GUI_PO_CUST and ME_PROCESS_PO_CUST.
Actions Taken:
I have created a custom Function group and subscreen '9000'.
I have created a 'Z' structure as per the screen layout on the Header Tab
I have appended the custom fields in EKKO custom include CI_EKKO.
Reactions:
1. I am able to successfully display the screen on additional tab at header level.
2. The Display & Change is working perfectly for screen '9000' on ME21N/ME22N and ME23N header.
Problem:
I am unable to read the 'Z' fields from EKKO to populate the TAB Screen '9000' and neither able to save the 'Z' fields from '9000' TAb screen for header data.
I am not using any EXIT for this and have to use only BADI for this solution. Please help me to implement this solution using BADI only.
Also i have tried implementaing the transport Data object -> Model + Model -> Dynpro + Dynpro -> Model + Model -> Data object methods, but these methods are not getting triggered.
Please let me know if i can use EVENT_PBO & EVENT_PAI if yes , than how to trigger these events and where..?

Hi ,
try to enhance PO header using SAP Note 407975
Summary
Symptom
You are using SAP customer enhancement MM06E005. There is no sample source
code for this enhancement.
More Terms
User exit, customer enhancement, MM06E005, example, sample
Cause and Prerequisites
You want to activate user exit MM06E005. Note that this is a consulting
note and not a correction of the user exit.
Solution
You can use the sample source code attached here to recognize the basic
functions of the exit. This example is, however, only one of many options
that are offered by the customer enhancement.
The sample source code includes the following functions:
o Supply of an additional field on header level
o Supply of an additional field on item level
o Derivation of a field on item level from the copied reference
document
Now, in order to be able to use the sample source code, you must create
field ZZFLAG on the header level of the document and field ZZFIELD on the
item level.
Double-click on Include table CI_EKKODB
Enter the following values:
- Name Component type DType Length DecPlace Short text
- ZZFLAG CHAR1 CHAR 1 0 1-digit indicator
Save and activate the include table.
Double-click on Include table CI_EKPODB
Enter the following values:
- Name Component type DType Length DecPlace Short Text
- ZZFIELD CHAR1 CHAR 1 0 1-digit indicator
Save and activate the include table.
In order to activate the sample source code, you additionally have to carry
out the following changes on screens 0101 and 0111.
1. Screen 0101: Create the following fields:
2010.02.05 Page 2 of 3
SAP Note 407975 - MM06E005: Collective note: Examples for
implementation
"Checkbox" Name: EKKO_CI-ZZFLAG
2. Screen 0111: Create the following fields:
"Input/output field" Name: EKPO_CI-ZZFIELD
"Pushbutton" Name: BUTTON
FctCode: ZZDETERMINE
The following assignments apply to the sample source code:
EXIT_SAPMM06E_006 --> LXM06F36
EXIT_SAPMM06E_007 --> LXM06F38
EXIT_SAPMM06E_008 --> LXM06F37
EXIT_SAPMM06E_009 --> LXM06F39
EXIT_SAPMM06E_016 --> LXM06F41
EXIT_SAPMM06E_017 --> LXM06F42
EXIT_SAPMM06E_018 --> LXM06F40
Copy the source code from the attachment and insert it into the
corresponding function modules. Save and activate the function modules.
Create the following variables in the corresponding TOP include in order
not to get any syntax errors:
INCLUDE ZXM06TOP
data: gl_aktyp type c,
gl_no_screen type c,
gl_rekko like ekko,
gl_ekko_ci like ekko_ci,
gl_ekpo_ci like ekpo_ci,
gl_ekpo like ekpo,
gl_ucomm like sy-ucomm.
types: begin of ekpo_tab,
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
ekpo like ekpo,
end of ekpo_tab.
data: gt_ref_ekpo_tab type table of ekpo_tab.
Save and activate the TOP include.
On header level, you can now store a character, X or space, via field
ZZFLAG on the database with the document and read it also again.
On item level, you can fill field ZZFIELD with a one-digit value and save
it with the document. If you copy this document, the system displays an
additional function button on tab page "Customer data". If you press this
button, the value of the reference document is copied to field ZZFIELD.
If you want to store the source code as sample source code in your system,
start Transaction SMOD. Enter MM06E005 as an enhancement. Select
"Components". Press "Change". Position the cursor on the corresponding
module and choose "Sample code". Create the corresponding include and copy
2010.02.05 Page 3 of 3
SAP Note 407975 - MM06E005: Collective note: Examples for
implementation
the source code from the note. Save the include. Note that, of course,
syntax errors may occur when you check components. This is because the
includes of the sample code are not integrated into a program but rather
are completely independent and, therefore, do not have any relationship to
each other either. For this reason, only save the include and do not
activate or check it. The sample code has to be copied into the
corresponding function modules in order to become active.
If you use the user exit in the new purchase order, it is not guaranteed
that the customer screen is always processed. To make sure that possible
required fields are checked, include a corresponding message into the
EXIT_SAPMM06E_012. This screen is always processed.

CV130 - Custom screen / tab

I need to add a custom screen or tab for DMS. I have screen 9000 in CV130 by copying screen 1204. I have added screen fields PRPS-POSID on the custom screen . I am not able to access the value of POSID when i enter a new value in the screen . In normal module program you have to code for the same but in this the other tabs it is working fine with same code as in 1204 but not for the custom screen. Do we need to do anything for this ?

Hi Neil
The sales order program (SAPMV45A) has the "old" screen-exit where you can implement an own your screen.
There are 2 screen:
- One for header: 8309
- One for item: 8459
If you active these screen (subscreen) a the tab "Addiional Data B" will be available
You need to get the access key in order to change them
Max

Who has changed the Custom Field value?

Dears,
Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
Example:
There is a PDP (say ProjectInfo):
There is a Custom Field added to that PDP (say Project Status = In Progress).
Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
I need to fetch the information regarding who has changed that Custom field.
In which direction should I move: Event Handlers, PSI???? Any other stuff?
Thanks & Regards,
Shravan

Hi Shravan,
I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
Another way is to use a 3rd-party tool like
FluentPro Audit Tool.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to change the fully qualified host name

Hi,
how can I change the fully qualiied host name?
Regards
Marc

Hi Michal,
I'm doing the FlightSeatAvailabilityCheck-Scenarion of the demo example and get an error. To get more details about the error I had a look in the XI Runtime Workbench. There I can see, that the wrong url is called (without the hostname) and that the access is forbidden (403). Therefore I want to change the fully qualified host name. I knew that I have to change icm/host_name_full but I don't know where I can do it (which transaction)?
Regards
Marc

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

Process chain status message in the custom screen.

HI All,
We have created a custom screen for hierarchy upload in BW once the file has been uploaded it will trigger an event which is triggering a process chain. The process happen like
Upload the file from desktop it will go and sit in al11 folder
Trigger an event which will trigger the process chain
Infopackge routine has been written which will download the file for al11.Please find the attached screenshot is for your reference.
Once the DTP has been completed we need to trigger a message which will tell us the status of the DTP like finished successfully or not. This message should have to show in the custom screen which we have provided to the customer.
We are aware of mail recipient list option. Please suggest further options
Many thank sin advance.
Regards,
Sakthivel S

Hi Appana,
Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
Thanks
Anil

PO stock transport order - item change - field Customer in tab shipping

Dear all,
because of an existing modification it is necessary that I have to update the field customer at shipping tab of an stock transport order item when item's storage location was changed within TAC ME22N or ME21N.
Unfortunately SAP has not implemented this functionality within BAPIs or Userexits.
Does anyone has an idea where we have to place this modification?
Until the installation of the last support package, the modification changed the customer within include MM06EFPV_PTV_FUELLEN, form ptv_fuellen before calling function SD_TRANSFERDATA_DETERMINE and it worked.
Best regards and thank you for your replay!
Michael Schleis
PS: We are using SAP R/3 Enterprise Release 4.7 and the following Support Package
SAP_APPL 470 0029 SAPKH47029 Logistics and Accounting
Edited by: Michael Schleis on Mar 5, 2008 5:35 PM

Piotr,
You can default the shipping point in your STO based on the combination of shipping conditon (maintained in customer master), loading group (maintained in material master) and the plant in SPRO->Logistics Execution->Shipping->Basic Shipping Functions->Shipping Point and Goods Receiving Point Determination->Assign Shipping Points.
If you don't use any of the entries (for instance if you don't use the loading group), then just leave the entry blank in config.
Hope this helps.
H Narayan

Changing the Custom Properties of Custom Webpart in Sharepoint 2013.

Am working on a requirement , where i need to create a quick poll , for that i am using some Third party webpart,
http://www.amrein.com/apps/page.asp?Q=5755 , this is the link of that Polling webpart , where the source code is not available.
Question : where by default we have to open the edit properties of that webpart in UI and then can configure those properties. But am facing a requirement like there should be UI with textboxes ,like in a form view in a page itself , and
after if we could enter those details, guess there is a button in a name " create a poll" ,
So in a click event , i could add this third party webpart to the page and now i need to change the custom properties based on the values we enter in the textboxes , how i can access the custom properties after if i got the instance of the that third
party webpart in a page using splimitedwebpart manager programmatically....??
Any One can guess this scenario...??

Hi,
If you use Third party web part, I suggest you contact the author of this web part to extend some custom requirements.
From your description, my understanding is that you want to create a quick poll.
Here are two solutions from codeplex with the source code for your reference. You can refer to the source code and customize your own solution base on your requirement.
Opinion Poll SharePoint 2010 Web Part
https://opinionpoll.codeplex.com/
SPUserPoll - SharePoint Poll Web Part
https://spuserpoll.codeplex.com/releases/view/104374
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Changing the customer screen tab name in transaction co02

Similar Messages

Maybe you are looking for