Changing the Decimal Notation

Hello Experts,
We have a request to change the decimal notation of values. Please consider the below example.
Value: 450000 (Four lakhs and fifty thousand)
Actual Decimal Notation in the syetm is 450,000.00 (In thousands)
Expected Decimal Notation: 4,50,000.00 (In Lakhs)
Please advice where to set this up in the system.
Thanks in advance,
Regards,
Sekar

Dear,
Please go to Systems>User Profile>Own data,
It will open a screen for your user ID, now go to Default Tab and change the decimal Notation as per your requirement.
Hope this helps!!!
Br,Vivek

Similar Messages

  • Changing the Decimal Notation of Invoice Smartform

    Hi Gurus,
    Is there a way to change the decimal notation of Standard Invoice Smatform "LB_BIL_INVOICE" ?
    I want to change the decimal notation of Smartform from "1.234.567,89" to "1,234,567.89".
    Please reply.
    Points will b awarded...
    Thanx in Advance..

    there are 2 ways that you can set these
    1. Go to SU01, change the defaults Decimal Notation to X 1,234,567.89
    2. If you have done 1st step, the notation still didn't change, put the below code in the initialization of smart forms:
    SET COUNTRY ' '.
    These should solve your problem.

  • Changing the Decimal places in the currency

    Hi all
    we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
    is there any programmes / reports that would fix such inconsistencies?
    any OSS notes?
    thanks and regards
    gkk

    HI,
    You should NOT change the decimal places in a productive system.
    If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
    You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
    Please check the note 137626 describes this.
    If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
    Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
    In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Change the decimal places of a field in screen table control

    HI ,
    I have a MENGE field having data element as , BSTMG (decimals 3 ).
    This field MENGE , I have used in a table control. The value in this field is filled from a custom Z-table where the same data element BSTMG is used. So , for eq.) value in MENGE field is shown as 6.010
    But the requirement is that the value should be displayed as only 2 decemals i.e.)   6.01
    I dont want to change the domain of the field in the Z-table , to 2 decimal places , because the table is used in other developments also , so it will give a dump there which I have to correct in other developments also.
    So , is there any way to change the decimal places of a field in screen table control , without changing the domain , in the table from where the value is fetched... ????
    Edited by: abhijeet_7013 on Feb 14, 2011 3:18 PM

    Hi, create a structure in local program with same field names and change the TYPE with some 2 decimal domain of MENGE. Populate this local stucture and use it in TABLE CONTROL.
    Hope this helps...
    Cheers

  • ME13-Difference in the decimal notation in amount in conditions

    Dear All,
    I get this issue in the conditions of ME13(PIR). The value in the database(KONP-KBETR) has 2 decimal places, whereas in the screen, decimal notation is not present. i.e., the value looks like being multiplied by 100. This is present only in one system. The other system shows the value as it is in the database. This is common for all users.
    How can I change this? Is it some screen setting? Please help.
    Thanks,
    Sumanth

    The database always stores the values with 2 decimals, but  dependend on the currency settings the SAP programs that show the values to the user (except they are using SE16)  or calculate values, or printing puchasing documents   will take care to show it in the right form.
    If you develope your own programs, then you have to take care about this by yourself.

  • I need to change the decimal sign from a ,  to a . in a worksheet - please help!!

    Im fresh from a Windows background and struggling to get started on the NUMBERS program - I need to change the ,  to a . for decimal numbers (the NUMBERS program does not seem to recognise the . but when I change the separator to a ,  it works - problem is that I have many exsiting Excel worksheets in which I used the .   There is no way that I want to redo all these worksheets so I need to change NUMBERS so that it recognises a . as the decimal separator and not the ,     Please help!!

    I don't know the iOS behavior so I will answer for OSX.
    At this time, on your machine, Numbers use the decimal comma.
    This means that your system is set to behave this way.
    Enter the System's Preference Pane entitled "Language and Text" and customize the number's format.
    In this screenshot you may see the default French settings.
    Replace the comma by the period in both "Decimale" fields then restart the machine.
    The system will use the decimal period and Numbers will do too.
    Assuming that one day you want to revert to decimal comma, no problem, revert the system's setting.
    Numbers will be fair enough to adapt itself to the new state.
    In fact, it store decimal numbers in the English format : decimal period and adjust on the fly according to system settings.
    Yvan KOENIG (VALLAURIS, France)  mardi 22 janvier 2011 18:03:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How to change the decimal places in the value axis of a chart in WAD?

    Hello,
    The key figure in my chart has 2 decimal places and I want the value axis to show the same. How to do that?
    Thanks in advance, Nathalie

    Hi,
    change the Format property of the ValueAxis-Line to 0.00
    Then the axis displays its values including two digits after the decimal.
    Regards, Kai

  • In a pages table change the decimal point to a comma

    I live in Italy and love it. However, there are issues. One that you might be able to help me with is changing the usual decimal point in a table to a comma. In Italy they use a comma for separating change from dollars instead of the usual decimal point.

    Scott Fox wrote:
    I live in Italy and love it. However, there are issues. One that you might be able to help me with is changing the usual decimal point in a table to a comma. In Italy they use a comma for separating change from dollars instead of the usual decimal point.
    I apologize but _*in many countries*_ the usual decimal separator is not the decimal point, it's the comma.
    It's time to understand that American habits aren't the universal rules or ways of life !
    I'm not saying that American habits are bad, just that they are local ones, not better than others.
    Yvan KOENIG (VALLAURIS, France) mercredi 30 septembre 2009 16:01:23

  • Changing the Decimal places for Percentage in cost distribution in SC

    Hi Gurus,
    Is it possible to change the number decimal places for the Percentage field in cost Assignment tab in Shopping cart in cost distribution option?
    The user wants 3 decimal places, currently we can enter only 2 decimal places.
    I have gone thro' couple of blogs which are talking about changing the price decimal and not the percentage field decimal. (in IMG setting: General settings > Currencies > Set Decimal places)
    So, if anyone come acorss this issue, please let me know.
    Thanks and Regards,
    Nowsath

    Decimal Places Factor of the Receiver Weighting Factors
    Specifies the number of valid decimal places with which the given weighting factors are valuated.
    Example
    You enter 123456 as the weighting factor. Depending on the factor, this number is interpreted as:
    Factor Decimal places Weighting factor
    1 0 123456
    10 1 12345.6
    100 2 1234.56
    1000 3 123.456
    10000 4 12.3456
    100000 5 1.23456
    1000000 6 0.123456
    Please check with your FICO consulant .what settings you have in backend system.
    http://help.sap.com/saphelp_nw04/helpdata/en/bb/bdbdc4575911d189240000e8323d3a/frameset.htm
    Muthu

  • Changing the Decimal in the currencies

    Hi,
    We have an issue related to our SAP Production system.
    At the time of raising Billing invoices to customers in USD currency,
    we are using currency SAR with  two decimal places currently. Now our requirement is to bring three decimal places to USD currency for another project. new project also in the same lanscape .To proceed further i need to achieve this change in existing settings and test the impacts. so it is a cross client change (oy04)it will be seriously effected to our production system. Whether it will be suggested for changing the TCURX table?  as these change is a urgent requirement for our new IS Oil
    project, as in the SAP note : 434349 and 137626 it is clearly mentioned that it will affect the already posted documents , I need to know what are the other impacts and is there any other way to do the same.
    Regards
    Sanj
    Edited by: Sanj S L on Feb 21, 2012 11:26 AM

    Yes changing the currency decimal in IMG in the midway is not at all recommended.  Instead, you can differentiate the same in pricing condition itself.  Say for example, currently if you maintain price per piece, you can maintain per ten or hundred so that system will calculate the exact net value.
    G. Lakshmipathi

  • How do I change the decimal separator from a comma to a dot in numbers? I upload my bank statements into numbers and all contain dots. Numbers does not understand the dots.

    Hi,
    I am a recent convert from Exell to Numbers.
    I have downloaded my bank statements to Numbers. The bank statement uses dots as decimal separators, whilst the Numbers default is a comma.
    I need to change the Numbers format to dot to avoid having to manually change all in the downloaded spreadsheet.
    This spreadsheet also includes my currency as R (ZAR Rands), so either need to remove these or get Numbers to understand it, again to avoid having to remove/change all manually.
    Would really appreciate your help.

    Hi,
    Thanks for your response. Have figured it out with the help of Ross at the V & A Waterfront Apple Store.
    System Preferences- Language and Region- at the bottom of the box click "Advanced"- then choose the dot/ comma under Number separators- Decimal and again under drop down box "decimal" under currency.
    Regards
    Teana

  • Is the Decimal Notation Setting based on the country of the vendor?

    I would like to ask help with regards to an error which i encountered when I Print Preview a Purchase Order Document via Transaction ME23N.
    Within the Print Program, the Decimal Point setting is normal ( for example 2.90, 192.97, 1,903.00 , etc.), but when the value is passed on to the SAPscript Form the Decimal Point setting is incorrect ( for example 2,90 , 192,97 , 1.903,00). This error is only observed on a single Vendor being used in the creation of the PO.
    I would like to confirm if indeed the settings for Decimal Notation is based on the settings being used in the specific country of the vendor.
    I hope anyone can help me out with this one. Reward points up for grabs.

    Hi
    In my case in sapscript while printing total for JPY is for three decimals but after calculating it used to take two decimals & leave one decimal to left ex as below.
    FOB : 100.000
    Freight: 10.00
    Total  : 1000.00 (In figures One Hundered & Ten Only).
    here in sapscript program this decimal notation was given for two hence it was going to left side we correct it to three decimal notation.
    kindly check with script & you can fix it there.
    Regards
    Rang

  • How to stop  the users from changing the Decimal in SAP

    How  to stop  the users from changing User Profile

    Hai,
    It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
    If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
    Hope this helps.
    Regards,
    Yoganand.V

  • Change the decimal places in screen MIGO field Order quantity - MENGE

    Gurus
          the scenario is in Screen MIGO , when gettin inside posting MIGO the functinal consultants need to give order quantity in the second screen and the technical name of that field is MENGE which can accept only 2 decimal places after point...now the requirement is we need to have 5 decimal places after point in that field...
    how to achieve this....

    still not solved.
    impact analysis

  • Decimal Notation in SU3 keeps on reverting after I changed

    Hi all,
    I am changing the decimal notation in the DEFAULT TAB at SU3 (user maintenance).
    the problem : the decimal notation always revert back to old selection despite i selected a new one, saved it, log out and login to get refresh.
    How do i stop the decimal notation from reverting to old one after I choose a new and saved it.
    Thanks
    William Wilstroth

    Hi all,
    Although my functional has submitted a request to SAP on this issue, but i still hope by letting this issue still open in this forums that there are still ideas for this weird problem... su01 not saving the latest decimal notation...
    I will get back to everyone if there is an update from SAP.
    Thanks
    William Wilstroth

Maybe you are looking for