Changing the default fan speeds
I have a MSI GTX 760 and I would like to change the default fan speeds. I can do this in MSI Afterburner, but this is a multi user pc and I want the fan speed to be for every user?
Hmm guess best answer is, Just dont get a msi display card. If there not going to fix a problems with fan speed's.
And MSI gaming app in OC mode makes the fan go no faster than 35%, click normal mode and go's higher.
Just use Gpu-z run test and watch the temp increase. 1 of the ways i have tested.
I feel quite let down as this is not the first time I have reported this and asked for help.
This thread just seems to be for UEFI bios.
Similar Messages
-
What are the default fan speeds of a MBP Retina 15'?
My settings got a little out of control, and I don't really know what the default values were, so what kind of fan speed does your MBP have in idle conditions?
Thanks.2000 rpm is the base line that the fans run. They can ramp up to 6000 under a heavy load.
smcFanControl does not let you set a minimum speed to a value below Apple's defaults. -
Mac pro 3,1 default fan speed?
Hey guys, ive been messing around with SMC fan Controller over the years, and have increased minimum fan speeds due to hotter ambient room temps, or simply because i was running extended cpu intensive activities. Good to take precaution since the 3,1s are known for increasing fan speed after things have already gotten too hot. This can lead to overheating. At some point within the SMC fan Controller app, i changed the "default" fan choice higher instead of creating a new blank custom fan setting before choosing my fan speeds. My problem now is that i dont know what the default settings were. i think one was 500, 600, 600, 800 RPM maybe? No idea.
its is a 8 core 3.2 earl 2008 3,1 Mac Pro Desktop. This has different fans than all other mac pros so this question is 3,1 specific.
I think the four fans are labeled:
Power supply
I/O
CPU
Intake
not entirely sure because i am away from teh computer at the moment.
Thanks
-Mitchrnitch wrote:
...At some point within the SMC fan Controller app, i changed the "default" fan choice higher instead of creating a new blank custom fan setting before choosing my fan speeds. My problem now is that i dont know what the default settings were. i think one was 500, 600, 600, 800 RPM maybe? No idea...
smcFanControl's preferences are located in /Users/<user>/Library/Preferences as com.eidac.smcFanControl2.plist. I believe that if you move that to the desktop and restart, a default plist will be rebuilt for your particular Mac. If that doesn't fix it, you can always put the plist back where it was.
Or, you can simply make smcFanControl not a startup item and then use something like iStatPro to see what the unadjusted fan speeds are because smcFanControl doesn't change the built-in speed defaults, it just overrides them as the lowest fan speeds. -
How to change the default library size...
I have a PowerMac G4 with 1.25ghz and 1.25gig memory. I also have about 7500 photos, a total of about 10 gig, with about 1/3 taken with a Nikon D70. As you might guess, iPhoto (and only iPhoto) is really slow to open and close...I get the beachball for a minute or so before anything happens.
In reading topics surrounding the slowness of loading/closing iPhoto, one person suggested changing the default size of the iPhoto library...but they didn't say how? I'm assuming that this changes it so that the system doesn't need to show the whole library? This isn't just viewing the pictures as large pictures instead of thumbnails is it?
Any help would be appreciated....also, if there is another solution I'd love to hear about it.
Thanks,
TomThomas:
As you've read the problem comes from your Nikon camera and the MakerNotes it creates and adds to each image file. I believe you're referring to splitting up your library into smaller sub libraries. That can be done by making a duplicate of your current library, call it Lib1. Then open Lib1 with iPhoto and delete all the photos but those you want in that particular library. Make another duplicate of the original library, Lib2, and repeat the process. That way you'll have multiple smaller libraries that you can manage with either iPhoto Buddy or iPhoto Library Manager.
Eric Lindsay developed applescripts to remove the MakerNote information from the Library.iPhoto file which gets the speed back up to what it should be. However, any new imports from the Nikon will add MakerNotes.
OT -
How to change the default name of new adjustment layers? (and other Q's)
How do I change the default name of new adjustment layers?
How can I make it so that adjustment layers don't come with a mask when I create them (unless I have a selection active)?
Why isn't the Shadows/Highlights functionality an adjustment layer? It's accessable under "adjustments" but you can't use it non-destructive
Where can I find documentation on Photoshop's API? (I want o make tools for it - javascript)Forgive me for not looking into your Maya-specific links, but one can automate Photoshop using JavaScript indeed (on Windows also VB, on Mac also AppleScript).
Not everything can be automated naturally, but a lot – and it can really speed up many tasks; and with the »small« repetitive ones like saving copies off of files etc. combining Scripts with Configurator Panels can be especially convenient.
There is a Scripting Forum over at
http://forums.adobe.com/community/photoshop/photoshop_scripting
As for plugins: it's something I would like to learn some day (I guess you would have to go with Flash and AS3 for making actual plugins)
I think you might also have to learn C++ or C.
There is Forum the contributors to which might be able to give you pointers if you get to that.
http://forums.adobe.com/community/photoshop/photoshop_sdk -
Can I change the default snooze interval in Office 2013?
Currently, the default for the snooze setting is set at 5 minutes. Can I change the default snooze interval in Office 2013?
I'm sorry to tell that we can't change the default snooze time in Outlook. We can just type a different time in it or select from the drop down.
For more information about the default snooze time behavior, you can refer:
http://www.msoutlook.info/question/552
Best Regards,
Steve Fan
TechNet Community Support -
Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
OsvaldoHi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support -
I'm using Macbook Pro 13" mid-2012 MD101, Yosemite. My default fan speed in smcFanControl now is 4000 rpm. It's just 2000 rpm in Maverick and older version of OS X. Is it OK? Surfing web with fan speed at 4000 rpm is not comfortable at all. It's too much noise
Why are you using a hack to override the designed performance?
Uninstall the hack and maybe it will perform better. -
How can you PERMANENTLY change the default Ken Burns effect?
I don't like the Ken Burns effect and want to PERMANENTLY remove it from the default setting for slideshows. I know how to deselect it every time I create a new slideshow, but isn't there a way to change the default setting so the Ken Burns effect is not selected unless I want it?
Terence Devlin wrote:
You may have a problem with your keyboard as you seem to be unable to type the word 'permanently" in lower case.
SImilarly, you cannot permanently disable the Ken Burns effect and remove it from the default settings.
iPhoto menu -> Provide iPhoto Feedback
Regards
TD
I don't know if anyone will ever read this, but I feel compelled to say that:
a) This reply is great, probably one of the best I've ever seen.
b) I'm a fan, TD, I'm a fan. -
Power view in SharePoint - Changing the default save location?
Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
How do you change the default save as directory when saving a PDF file to your hard drive?
This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.There is not a way to set the default location from all the forums i searched in the last couple days.
Russ -
How to change the default apex port
hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
In the Options menu I changed the default download location (folder) to a folder I have on my desktop and saved the changes. But this option reverts to the default folder when I turn on my computer and open FF the next day.
Thank you for your response.
I do use CCleaner and just ran it. It did not change the download option folder that I had changed from the default so it appears that this is not cause.
Any other suggestions would be appreciated. Thanks again! -
How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks
http://support.apple.com/kb/ht5621
Maybe you are looking for
-
It's really been puzzling me, I've never logged in the Apple site on a laptop before - I have been getting the same message 'Unable to verify iCloud account' every time I try and erase all data and content from my iPhone 4s. When I go to iCloud on my
-
How can I prevent filter from getting applies to .html page?
Hi, I have a MyFaces filter that I don't want applied to pages ending in ".html". However, upon visiting the "/myapp/index.html" page of my application, I get an internal server error, and the stack trace indicates that the filter is being invoked. H
-
Sonic's Video 55 with iPod nano
I've been trying to use the Sonic Video 55 with my iPod nano (3G) and can only get music videos to play. When trying to play movies that I have ripped or purchased, I just get a blue screen even when following Sonic's "Using iPod Classic / Nano 3G wi
-
Hi, I would like to know how to create an background application which can track keystroke as we are creating an application which records the ppt slide change time. And this log we are going to use it for another javaFX application. Thank you in adv
-
Utility for handling multiple Oracle instances (docs, changes, etc.)
Please, remove this topic if it's not appropriate for this forum. I handle several databases (up to 50), and I would like to have some utility for handling them in way to have: - graphical GUI for their physical location - to keep info about all chan