Changing the default player

How can I change the default publish preview player from HTML to Flash in Adobe Flash CS5.5??

I believe if you just use Control -> Test Movie (CTRL-ENTER on the keyboard) you will get the same result as choosing to Publish Preview -> Flash. An swf will be published and the file will be displayed in the Flash Player.

Similar Messages

Is there a way to permanently change the default video player to VLC?

I installed the QuickTime update and now all my AVIs won't play with sound. Downloaded VLC and they will play with sound. I went to 'Get Info' on an avi and changed 'open with' to VLC and selected 'change all'. They will open and play with VLC until I re-boot, then everything changes back to QuickTime. Right now I just hate Quicktime and don't want to use it. How can I change the default video player to VLC without Quicktime changing it back when I reboot?

How can I change the default video player to VLC without Quicktime changing it back when I reboot?
Sounds like you changed it properly. The question now becomes, "Why isn't the change being saved?" Have you tried repairing your disk permissions? As to the original problem, it could be that the QT upgrade has rearranged the order of your stored codec components table called by QT. While this table is rebuilt each time the QT Player is opened, the table seems to be ordered from latest component installments to oldest. So there is the possibility that two (or more) components are allocated for playback of you AVI files and the wrong one now has priority. If you can find it (e.g., possibly Perian), you could simply remove it from the QT components folder and then replace it to again change the "build" order for the table. (Basically, you would need to run a component conflict test strategy here.)

How can i change the default application to vlc player for playing any videos on my macbook?

How can i change the default application to vlc player for playing any videos on my macbook?

1. Control click the file you want to open.
2. Click Get Info.
3. Under open with, pick the App you want to be default.
4. Click Change All Button.
5. Confirm your decision.
You have to do this with every file that has a different extension. You can't change the default for every file with a different extension in a single operation.

I have quicktime player 10 installed on my mac and it is considered the (default) player. How can I get my Quicktime 7 Pro as my default player?

I have quicktime player 10 installed on my mac and it is considered the (default) player. How can I get my Quicktime 7 Pro as my default player? When I downloaded video from my phone, I couldn't hear the sound because Quicktime player 10 automatically opened the file and there was no sound, When I opened the file in quicktime 7 Pro, the audio was fine. I would prefer to have all movie files open automatically using my Pro version. Any suggestions? When I trashed the QT player 10 and clicked on the .3g2 movie file, it didn't automatically open with QT 7 Pro. Instead a window opened wanting to convert the file to Flash. I don't want that to happen.

Try This...
Highlight the file you want Quicktime 7 Pro to open -
Goto File > Get Info or (CMD I)
In the Get Info window, scroll down to "Open with:"
Select the player you want to open the music file.
Click the "Change All..." button if you want to
"Use this application to open all documents like this.”

How can I make QT7 the default player?

I don't want to right click every file and tell it to open with QT7. I only use those files once anyways. Is their a way to make QT7 the default player instead of QT10?
Thanks.

No. Not really as the default for the .mov extension will always be QuickTime X.
You can set the default for an individual file using the "Open Using" (Get Info window) but can't use the "Change All" button for that file extension.

How do I change the default storage file for PDFs?

I want to save PDFs. Now the default files are in AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N. I have to drill UP through all those to get to where I want to save the item in PDF Files. How can I change the default?

The file path (AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N) that you posted is the internet cache of the MS Internet Explorer and not a location that Firefox uses although MS plugins like the Windows Media Player will use that location.
Files that are opened in an external program will be saved to the temp folder as specified in the %temp% and %tmp% environment variables.
What makes you think that Firefox is saving PDF file in that folder?
Are you using an extension like IE Tab or IE View to open specific locations with IE?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How to make QuickTime the default player again?

How to make QuickTime the default player again?

Two finger Click on the file and then select get info.
It will open a window.
Srcoll down to open with.
Select Quicktime.
Then select change all.
After that, all MPEG 4 or the type of file that video is, will be defaultly opened by quicktime.
Hope this helped!

Can I change the default resolution to minimize buffering?

Can I change the default resolution to minimize buffering?

This is a function of the server and content, not the player itself. You'll have to do this through the different video players (YouTube, Vimeo, Hulu, etc.)

How do I change my default player

How do I change my default player to Spotify instead of Itunes?

In the Finder, locate an MP3 audio file > select it > Get Info
In the Get Info pane, locate [Open With] pull down menu > click = (all the MP3 capable Apps should be in the list)
Choose "Spotify"
Click the button
Close the Get Info window and that's it !!
ÇÇÇ

"An error occurred while updating the default player for audio file types"

Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
"An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
Doe anyone have any other suggestions?
Thanks in advance.

I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
Go to Edit/Preferences.
Choose the Advanced tab
in the General subtab select the contents of the box labeled "iTunes Music folder location"
Click Start, choose Run
Paste the location
Press the button to move up one level
Right-click the music folder, choose Properties
If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error.

Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types. You do not have enough access privileges for this operation." How to fix?

After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
J

Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

Changing the default player

Similar Messages

Maybe you are looking for