Changing the display name of project file folders for TOC

I'm interested in changing the display names of the project file folders for my TOC. For example, I want to name the folder "01-intro" so that it is short and lowercase. But I'd like the TOC to say "Introduction to the System." I know I can manually rename the folder in the TOC either through its properties or by right-clicking => Rename, but I auto-create the TOC occasionally and I don't want to have to rename every folder every single time.
Does anyone know if there is a way to set a persistent property for the folder so that its display name in the TOC is different? I am using RoboHelp 9. I saw an option called "Detail" in the properties of the WebHelp layout in RoboHelp 8 that seems like it may have done that, but I no longer see this property in RoboHelp 9.
Any assistance would be much appreciated. Thank you.

I think the lack of response confirms that if you are going to use Auto Create, you have to accept the way it is.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • Changing the display names of objects in the JTree

    Hi All;
    Is there a possibility of changing the display name of the nodes in JTree? I mean not the actual name of the JTree object, but only the display name? Is there any method available for that?
    Your help would be greatly appreciated
    Thanks in advance
    Regards Madumm

    If your tree node object has application-specific complexity, you should define a custom tree node class and a renderer for that. Or if you just could use DefaultMutableTreeNode, call setUserObject() method with a new String.

  • How to change the display name

    How do I change the display name I chose?

    Anyone came here, refer to this post.
    http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

  • Can I change the location of adobe organizer file folders in Elements 11 from my c to d drive ?

    Can I change the location of adobe organizer file folders in Elements 11 from my c to d drive ?
    My laptop, which uses Windows 7, came with the hard drive divided between a C and D drive.  the C drive, where all the programs load, is nearly full, and I would like all the photos and videos that adobe elements organizer finds and that I download into load on my nearly empmty and spacious D drive.
    In other programs I can change this is file prefernces, but I cant find that feature in elements.
    Is it possible? and how can I do it?

    Team Ben Hur
    SG will probably have more to say about his reply, but in the meanwhile you might want to check out Premiere Elements 11/Elements Organizer 11/File Menu/Catalog Manager... and the Custom Location option. I suspect that is what both of you have in mind?
    When Photoshop Elements 11 and Premiere Elements 11 are installed on the same computer, they share a common Elements Organizer (catalog) although they can be purchased as standalone products each with its own Elements Organizer (catalog).
    ATR

  • How to change the display name for Gmail aliases?

    I have a Gmail account with multiple aliases. They look like this:
    Joe User <[email protected]> (Primary)
    Support <[email protected]> (Alias)
    Billing <[email protected]> (Alias)
    Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
    I have to imagine I can do this. Can someone help me out?
    Regards,
    Dave

    Anyone came here, refer to this post.
    http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

  • How to change the displayed name of a DefaultMutableTreeNode

    Hi there...
    I created a class A extending DefaultMutableTreeNode and A's constructor is as follows:
    public A(UserObject object) {
    setUserObject(object);
    so my problem is if I wanna add such an instance of A, in a tree (as a node) the displayed name is very strange, something like:
    A@72834 or stuff...
    How can I change the name afterwards??
    are there any commands to do so?
    I have created object of class which contain some data. when I setUserObject to node then tree display's like A@72834 or stuff.
    Here I required object data whenever I get node. how can I solve this problrm.

    Override the toString method in the class of the user object.

  • How can I change the display name of a contact in my address book?

    If I open one of my contacts in the Address Book, the display name is the name of the organization. I want it to be the last name of the individual. How can I change that?

    Thank you for your reply. I realize from your answer that I didn't poise my question properly! If I have not entered anything in the 'Display name' field then the message header (i.e. the title of the business card) follows by default the name of the 'Organization'. I wanted to know if it's possible to change this so that the message header of the business card follows the 'Last name' of the person and not the name of the 'Organization'. Thank you!

  • How can I change the display name when I call someone?

    I recently gave a re-provisioned 8300 to a new employee. I wiped out the phone, and re-setup the phone in our exchange server to match the new user's settings.
    The only problem he's having is that when he calls someone, the display name shows the previous users name as the person calling.
    How do I change that?
    Thanks in advance,
    howe132

    You don't say what model the device is, but if GSM, make sure the SIM card has not been edited to the preview name.
    Options > Advanced > SIM card > Menu > Edit Sim Phone Number
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Change the display name of the Profile Manager Portal?

    Hello.
    Does anyone know if it's possible to change the name that's displayed on the Profile Manager User Portal? It's using my server name and I'd rather it be something a little more generic? Is this possible?
    Thanks,
    Kristin.

    Hello,
    Currently, the Power View report doesn't support the drillthrough feature like "Go to URL".
    Personally, I recommend you that submit a suggestion at
    https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
    For more information about the features supported in Power View, please see
    Power View (SSRS).
    Regards,
    Fanny Liu
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Fanny Liu
    TechNet Community Support

  • Change the Display Name of sender

    hi all,
    I am sending email from SAP to outlook
    I suppose the sender name is concatenated from the SAP account master(SU01) but it seems it is cache somewhere.
    For example, the original name of my account is "Steve Jordan". I add "[From SAP]" in front to make it "[From SAP] Steve Jordan" through SU01. Then I send out an email through my account and I can see the updated name both in SOST and outlook
    Later I change the "[From SAP]" to "[Don't reply]" in SU01. By doing this I am intended to make the sender name "[Don't reply] Steve Jordan". Then I send out new email. However, in SOST and outlook, what I see is still "[From SAP] Steve Jordan"
    Please advise
    Thanks

    HI,
    *"As far as I am aware this is not possible in Mac Mail and is a major shortcoming considering that other mail applications are able to do this."*
    You can provide feedback ..
    http://www.apple.com/feedback/macosx.html
    Carolyn

  • I changed the user name - everything resetted - iphoto folders lost :(

    hello,
    i had hundreds of folders in iphoto so it would be perfect if somebody could help how i can reset this

    You need to change it back again.
    How to change user short name or home directory name
    http://support.apple.com/kb/HT1428?viewlocale=en_US
    Also, this might be useful:
    http://www.macworld.com/article/132693/2008/03/changeshortusername.html

  • How to change the display name in the filter view

    Hi,
    I have one column "*Year*" and type in case when 1=2 then "product_d"."name" else "calendar_d"."year" end.
    I add a filter view for it. but when I select, like 2010, it will display"case when 1=2 then "product_d"."name" else "calendar_d"."year" end" is equal to 2010.
    So how can I change it to "Year is equal to 2010"?
    Any one have any idea about this?
    Regards,
    Anne

    anne wrote:
    Hi David,
    About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
    You can try in your locale.
    You will find they are different.
    BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
    THEN When you type in
    "case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
    AND
    "calendar_d"."year",
    IT WILL SHOW U TWO different RESULTS.
    I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
    That why I choose to use a case when function..
    So, do you have any idea about this?
    Regards,
    AnneWhy not use two filters in your request? Have something like this:
    product_d.name IS NOT NULL
    AND
    calendar.year IS PROMPTED?
    ...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

  • Can I change the display name of a hyperlink in Powerview?

    I have a power view report that has several very long hyperlinks in it, is it possible to display those links as something else in the report?

    Hello,
    Currently, the Power View report doesn't support the drillthrough feature like "Go to URL".
    Personally, I recommend you that submit a suggestion at
    https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
    For more information about the features supported in Power View, please see
    Power View (SSRS).
    Regards,
    Fanny Liu
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Fanny Liu
    TechNet Community Support

  • Change column display name

    Hi,
    How can one change the display name of a column.
    For example I have columns C_ProjectID which when display in view should appear "Project ID". I tried to play with FieldRef but somehow it doesn't reflect the change on page.
    What I am missing here? Below is the schema from Sharepoint designer.
    Thanks in advance.
    Regards,
    Abdul
                    <ViewFields>
                        <FieldRef Name="TISImpact_x0020__x0028_Yes_x0020" DisplayName="Impact (Y/N)"/>
                        <FieldRef Name="C_Title" DisplayName="Title"/>
                        <FieldRef Name="C_ProjectID" DisplayName="Project ID"/>
                        <FieldRef Name="TBP"/>
                    </ViewFields>

    Hi,
    To change the column name, you can simply select the field name from the ListSettings page and change its title /column name to the desired name. Note:the internal name of the column will still remain the same.
    Secondly, you can also do this progrmatically too :
    using (SPSite site = new SPSite("http://site"))
    using (SPWeb web = site.OpenWeb())
    web.AllowUnsafeUpdates = true;
    SPList sampleList = web.Lists["ListName"];
    // Imp Step
    SPField title = sampleList.Fields.GetFieldByInternalName("C_ProjectID");
    title.Title = "Custom";
    title.Update(true);
    sampleList.Update();
    web.AllowUnsafeUpdates = false;
    You can change the display name via Sharepoint Designer bu clicking on the list -> list settings -> click on "Edit list columns" under cutomizations > select the column and right click and select rename.
    Hope this helps
    Regards,
    Priyanka

  • Need help changing the setting to preview entire file names

    Using Leopard, I would like to to be able to read the entire name of a file.
    For example, my files might say (File 2.....609). What the file is named is File 2 Graphs 6209. How can I set up Leopard to allow me to read the entire file, so I don't have to guess the file?

    Ah! I tend to avoid using column view for folders containing items with long names, because it increases the amount of horizontal scrolling needed to see everything, & because I'm usually interested in seeing & sorting items by the non-name columns available in list view.
    FWIW, I tried the column view drag handle double click tip on one of the folders containing some of my extra long named items & it does expand to show the entire name, but I don't care for the result: the Finder window expands horizontally so much that it won't all fit within even a 24" widescreen display! So not only do I have to scroll the window's content horizontally to see everything, I have to move the window partially offscreen to do so. That is too much of a chore to make this a very good alternative for long path names.
    It occurs to me that there might be a more elegant, subtle, & "it just works" Apple-like solution possible: instead of just abbreviating the displayed item name by replacing enough of the middle characters of the name with an ellipsis to make it fit, it would be cool if this were adaptive & tried first to abbreviate the non-unique parts of the name, relative to all the items in the column. So if say 3 files in a view contained the same 12 character sequence, that sequence would appear with the same abbreviation in each file, more frequently preserving the display of the unique parts of each file name.
    Does this make sense?

Maybe you are looking for