Changing the internal domain to a subdomain -- Help!

Hello, so I have a huge project coming up and i was wondering if someone had some experience on this that could give me some advice.
So, started working on this company that has an internal domain called.. lets say abc.com and external alphabetaghama.org .. the problem we have is that we cannot get certs for our internal domain for public access like our exchange
server fqdn for example is exchange.abc.com ... Someone else owns abc.com which prompted my new boss to fix this and now i have a project to change our internal domain to match our external but I know that the best practice is to have a
subdomain as the internal domain and I think that's the route my boss wants to go with.. which brings me to my question.
What will I have to do to get this accomplished... our external domain name is really just a forward zone and i dont have a forest so does that mean that i will have to build a alphabetaghama.org forest and add a subdomain like corp.alphabetaghama.org
for our internal and then migrate everything over?
We currently have exchange 2007 with 2008R2 DC's.. our new domain would be on 2012R2 DCs with the same exchange server..
Sorry if something doesn't make sense, I'm a little new to a major project like this...

Hi,
This really depends on the requirements. As the Domain restructure is a huge project, we'd better have some experts with good experenses at hand. And if the problem (to get public access) is solved, it is recommended to have a good consideration
if the rebuilding is needed.
Regarding the internal domain name, maybe you want to have a look into the below MS article:
How Domain Rename Works
http://technet.microsoft.com/en-us/library/cc738208(v=WS.10).aspx
For your reference:
ADMT Guide: Migrating and Restructuring Active Directory Domains
http://technet.microsoft.com/en-us/library/cc974332(v=WS.10).aspx
One thing to mind is ADMT tool may cannot
be installed on a Windows Server 2012 DC, so please make sure in the target domain we have a Windows Server 2008 DC to be the ADMT server.
ADMT 3.2 and PES 3.1 installation errors on Windows Server 2012
http://support.microsoft.com/kb/2753560
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Changing the internal IP address of a TMG server

Hi, I am moving our TMG 2010 server over to a new datacenter and while the IP subnet will be the same the internal IP address of the TMG server must change.
If I understand it right, all I would have to do it change the physical NIC properties to reflect the new address right? If for example I am changing the internal NIC address from 10.0.0.1 to 10.0.0.2 and the 10.0.0.x network is already defined in TMG as
an internal network then there is nothing that needs to be done from the TMG point of view correct? This is not being used as an outgoing web proxy but for server publishing rules.
Am I on the right track?
Thanks for any help.

Hi, I am moving our TMG 2010 server over to a new datacenter and while the IP subnet will be the same the internal IP address of the TMG server must change.
If I understand it right, all I would have to do it change the physical NIC properties to reflect the new address right? If for example I am changing the internal NIC address from 10.0.0.1 to 10.0.0.2 and the 10.0.0.x network is already defined in TMG as
an internal network then there is nothing that needs to be done from the TMG point of view correct? This is not being used as an outgoing web proxy but for server publishing rules.
Am I on the right track?
Thanks for any help.

CHANGING THE INTERNAL BATTERY

I was looking for a site that offered pictures and step by step instructions for how to change the internal battery. You know the one that keeps the time and date. But if you can help other wise I'm sure it's easy enough but wanted to take a look first without opening it up. Thanks

It won't hurt the iBook to be on all the time. You can do that, or else just reset the time and date when you do turn it on.
There is a capacitor that will keep the time and date for a short while--maybe 30 seconds--enough time to replace the battery in theory. But only a working big battery will keep the date and time all the time. Or being connected to a power source all the time.

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to change the Credential domain Value in XML gateway?

How to change the Credential domain Value in XML gateway?
configured the XML Gateway trading partner . It is generating the header as given below. but need to change the Credential domain to DUNS.
<Header>
<From>
<Credential domain="olgridap1.lan">
<Identity>53369415-cxml</Identity>
</Credential>
</From>
Desired XML header
<Header>
<From>
<Credential domain="DUNS">
<Identity>53369415-cxml</Identity>
</Credential>
</From>

You might want to check WLP 10.3 & deployment plan & log4j.xml for a similar topic.

Problem in receiving the internal domain mail through windowsmail, Outlook, Outlook Express

Hi,
Am not able to receive the internal domain mails in Windows mail,Outlook Express, Outlook. I can able to send and receive the mail for external domains. For Eg. My domain name is example.com & my email id is [email protected], i am sending a email to
one of my manager email id [email protected], the mail successfully sent there is no error while sending, in the [email protected] the mail is not receiving. If i send any mail to external domain eg. test.com ( [email protected] ) the mail sent
successfully and the mail also received from their end through the Outlook express, outlook or windows mail. I check with the mail service provider that was hosted by the web hosting vendor, they said there is a problem with microsoft. May I know whats the
problem and how can i resolve this issue...
Regards,
Rajesh P

This is what is coming in the mail:
Job Name
Released By
=
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB =20=
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
=20=
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
The correct format which i am expecting is:
Job Name
Released By
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY

Why is my account of the apple ID asks me to change the password every time. Please help me. Thank you

Why is my account of the apple ID asks me to change the password every time. Please help me. Thank you

In Firefox all browser windows and tabs use the same cookies that will identify you to the server.
If you open a different account then existing cookies are send to the server and the server sees that you already signed on (authenticated).
You can look at one of these if you want to sign on with different identities at the same time:
CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
CookieSwap: https://addons.mozilla.org/firefox/addon/3255
Multifox: http://br.mozdev.org/multifox/ - Different logins at the same time

Can we change the internal name of the workflow ?

I have designed a new workflow but need to change the internal name of it .
can we do it . if so how ? will the change affect the flow.
Regards,
Shashank

Hi,
I would run the script I mention above. Then extract the definition from the database and save it to a flat file.
Running the script will replace all references to the old type in the system, but obviously won't touch anything that isn't in the database (i.e. the .wft file). You could use a text editor to change the .wft file, but it would be more prone to error than running the Oracle supplied script and then extracting from the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

HT201303 Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please

Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please ..
<Edited By Host>

These are user-to-user forums, you are notalking to Apple here - I've asked the hosts to remove your email address from post.
Are you not able to log into your account and change your account details e.g. via Store > View My Account on a computer's iTunes ?

HT1349 I have an i-pad and have just got an i-phone but want 2 use a different I cloud? I've set up new email account and apple ID, but I can't change the I-cloud settings, can u help PLS??

I have an i-pad and have just got an i-phone but want 2 use a different I cloud? I've set up new email account and apple ID, but I can't change the I-cloud settings, can u help PLS??

The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.

Hey, I've got an iphone from a friend cause it was locked to O2 and she was moving to Spain for 5 years.... How do I change the Apple ID? Appreciate any help! :)) Thankss

Hey, I've got an iphone from a friend cause it was locked to O2 and she was moving to Spain for 5 years.... How do I change the Apple ID? Appreciate any help! :))
Thankss

Thank you for responding to my question so promptly! My Apple ID for my iCloud account on my MacBook is the correct (i.e. my @mac.com) email address. Do I need to sign out and then sign back in after I have changed/updated my details on my iPad?
When I look at the 'Mail, Contacts, Calendars' details on my iPad under the heading 'Accounts' it first shows my @me.com account and the items under that account are 'Mail, Contacts, Calendars, Reminders, Notes, Find My iPad' - when I expand the account details it shows that my iCloud Account is actually my @mac.com email adddress.
The second entry is iCloud which is currently my @gmail.com account. Under this account are 'Contacts, Calendars, Bookmarks, Reminders, PhotoStream, Documents & Data, Backup.
The third account is headed Gmail and is, indeed, my @gmail.com account, too. Under this account it shows 'Mail, Calendars, Notes'.
Am I correct in suspecting that the reason for my having multiple occurrences of both events in Calendars and people in Contacts is because more than one account is syncing Contacts and Calendars?
Thank you for your help
Cheers
Tricia

How can I change the internal role in GP runtime

Hi all,
Can I use the GP API to change the GP's internal role,for example,the overser in GP's runtime?
If this is possible,so how should i do this?
Thank you !
Best regards
delma

Hi,
yes, there is a solution. You can do this both in DT or in RT using the APIs.
This document describes both approaches (point 4 and 7 respectively):
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/fcdf77fc6510b3e10000000a11466f/frameset.htm">Starting and Terminating Processes Using the GP API</a>
The example shows how to access the Administrator role and change its user assignment.
HTH:)
Regards, Petja

Changing the default domain name of the server.

I know this is not the correct title for the topic. but its the best word i could found on my voculabary.
here's my problem.
Im using Sun App Server 9. the server is installed in the local machine. for testing purposes client access from the local server is sufficient. I deployed a web service using net beans 5.5. My problem is that the WSDL file is generated (by server) uses a fully qualified domain name rather than localhost. for example it uses http://mlb.stdmlb.sliit.lk:8080. When i try to create a client using netbeans it tries to access the server using this address (the one in the WSDL) but the firewall denies access to port 8080. Therefore i want to use the server to use localhost rather than the long domai name. (at least http://mlb) Can anyone tell me how to configure this?
Lahiru

These are the steps for changing domain name & IP address without reinstall
a) Stop the Gateway and Server .
b) Export the profile server database to a flat ldif file:
# /opt/netscape/directory4/slapd-host_name/db2ldif /temp/profile.ldif
c) Use awk, perl, or vi, to change every instance of the system domainname in the ldif file to that of the new system.
d) Import the edited ldif file into the profile server on the new machine:
# /opt/netscape/directory4/slapd-/ldif2db -i /temp/profile.ldif
e) edit etc/opt/SUNWips/platform.conf and change all the domain name & Ip address
f) edit /etc/opt/SUNWips/properties.file change the domain name
g) Start the platform server and gateway on the new machine.

Changing the internal domain to a subdomain -- Help!

Similar Messages

Maybe you are looking for