Changing the key in apple loops

Most of the loops that came with my GB2 are in "C".. is
there any way to change each loop to a different major
key.. say "G" or "A"

Open the track Info DialogBox (The "I"nfo button), click the Master Track button at the top of the DialogBox, and enter a new Key in the field. All loop dropped into your song will transpose to the key of your song.
If you're creating a new song, simply set the key when you create it, loops will again transpose to the key your song is in
--HangTime [Will Compute for Food] B-|>

Similar Messages

  • How to change the key of a MIDI track

    There has to be an easy answer for this.
    I have a Midi drum loop that I am using. I have changed the instrument so instead of the MIDI notes playing through a drum synth it is using one of logic's piano software instruments.
    What I am trying to do is change the KEY of this loop. It seems to only play in C. If I go to the piano roll, copy all the notes of the loop and move the notes up or down, I was thinking I should be able to alter the key/chord that the loop is playing. However, no matter what I do, the loop still seems to be in C.
    What is going on? And what can I do to easily change the key of this loop?

    How is Space Designer keeping the MIDI track in the same key of C
    I have no idea. I would normally think that such a thing is not possible.
    What is the instrument? What happens if you create a new track, and load this instrument, and create a new midi region, and load SD? Same problem? What about if you do this in a new project? Same problem?

  • How do you change the key of a Logic Pro X loop?

    Hi everyone,
    I am working on a song in Logic Pro X using one of the loops and I just wanted to know how to change the key of the loop to fit in with the key of the song? The key of my song is C Major while the Loop is in G Major.
    Any tips would be gratefully received.
    Many thanks.

    Jamiesroom wrote:
    How do you change the key of one specific loop using the Key/Transpose in the Inspector? Step by step instructions would be great.
    Many thanks.
    Here is the step-by-step instruction:
    Step 1: Select the MIDI Region and set the Transpose value in the Region Inspector to the left.
    Step 2: There is no Step 2
    If you are a newbie, then I would recommend to have a look at my Graphically Enhanced Manual "Logic Pro X - How it Works" where I explain everything in great details with lots of easy to understand diagrams and screenshots, including a separate chapter about Apple Loops.
    BTW: If you have a proper Apple Loop, then it should automatically adopt to the key of your Project. A transpose is not necessary, unless you want to overwrite a phrase to a specific key.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Changing keys in apple loops

    I just bought GB3. I can make simple songs with loops and I have no problem using my guitar via Imic. Is there a way to change the keys on the loops? For example, if I am recording a simple blues progression of C,F G and using the same drum loop I want to use C, D, G, C. So far, I haven't figured out how to do this. Is it possible?
    Thanks
    Kenny

    You can adjust the loop's pitch in halftone steps with a slider in the editor window. So if you have a loop in C, setting the slider to +5 (or -7) will turn it to F, +7 (or -5) to G.
    Don't expect spectacular results, though. Pitch-shifting an audio loop also alters its tonal characteristics, anything beyond 2 steps tends to sound unnatural.

  • How do I change the key of a wav file?

    I'm using Apple Loops Utility and the wav file plays the correct key & tempo there. But when I save it, and open it up in LE or add it into the arrangement, it's playing the original key? The only thing that is correct is the tempo. Can you change the key and save the change using Apple Loops Utility?

    I'm confused. Are you saying that in Apple Loops Utility the wav plays in the key and tempo of that wave, but when you add the same wav to LE it plays in a different key? You said in LE it plays in the "original" key. Seems like that is what you would expect. I would think it would play in the "original" key in both ALU and LE.

  • I am trying to change the tempo of a loop from Garageband.

    Hi,
    I am trying to change the tempo of a loop from garage band. I have seen video tutorials where people would do this from just below their tabs in their editor. However I cant get that option to come up.
    Also, I have tried using the Apple Loop utility, and I can change the BPM at the bottem but then it wont let me save the file.
    I would prefer to change the tempo in soundtrack pro but at this point I will try anything.
    Thx for listening.

    Left pane, Project Tab. Scroll down to the bottom and find tempo and key settings. These will control any loops in your project.

  • Changing the Key

    So I'm throwing together some Apple Loops in Logic to create my latest masterpiece. When searching through my media library I can simply change the key the Blue labeled audio loops play back in. But I can't for the life of me figure out how to make the change when I add it to my song.
    What am I Missing???

    Transposition is entered into the inspector

  • I'm a singer wondering if it's possible to change the key to a backing? Eg. a key convertor?

    I'm a singer wondering if it's possible to change the key to a backing (song)?  Eg. A key convertor?

    Even if that is true (and I am almost 100% positive that it is not true), you're talking about getting a warrant and going through a lot of legal channels, plus you'd have to show probable cause that information on the device would be helpful in solving a case, and even then, only the information relevant to the case would be available.
    For this family's situation, there is no viable option.  Let's not falsely raise hopes by arguing semantics and technicalities.
    Can you even support that claim with any documentation?  That Apple has the ability and/or performs that service at all?

  • How can I change the ICloud/ID Apple on my Ipad/IPhone?

    I've changed my Apple ID and I've changed the ID of Itunes on my IPad/IPhone.
    Now I want to change the IPad/IPhone ID on ICloud, but my IPad keep and store on my previous ID. How can I change the ICloud ID Apple on my Ipad/IPhone?

    Welcome to the Apple community.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Can you change the hotkeys in Apple DVD Player?

    I'm trying to change the hotkeys in Apple DVD Player. Really, all I want to do is add a hotkey for slow motion. I need the hotkeys because I'm using a ShuttleXpress shuttle mouse and I want to beable to click a button to put it in slow motion instead of having to use the normal mouse. Thanks

    you can easily assign a keyboard shortcut to slow motion in keyboard system preferences->keyboard shortcuts. however what you want is not a shortcut but a reassignment of a mouse button. the only tool I know that might be able to do that is [USB overdrive|http://www.macupdate.com/info.php/id/7115]. you'll have to find out if it works with your particular mouse.

  • Is there a way to change the key photo on iPhoto Faces?

    Hi
    The picture on the corkboard for each person appears to be the first photo you identify for that person.
    Is there any way to change the key photo, like you can do with Events?
    Thanks
    Dave

    Thanks very much!
    I hadn't realised you can do that on Events, I have always right clicked on it and brought up the option to Change key Photo. That doesn't work the same way n Faces, so thanks for the Space Bar trick.
    All the best
    Dave

  • Changing the Keys of the ODS

    Hello Guys,
    We have a requirement where we have to change the keys of the billing document, Sales order and delivery document ODS's. This is due to the R/3 side running out of document ranges. We will be working on it shortly and just wanted to know if someone has done this before? If yes, what r the points to consider. Any help is appreciated.
    Regards
    Sriram

    Hi,
    when you change the key your are trying to change the table structure in data base level. so the earlier structure collapses onceonce you change it.so the option you have left is to rebuild another ODS.
    If you have to find out the queries used upon this ods.since you say the stastics are not maintained.
    change all business enabled queries.(specially designed on requirments first)
    importantly you can not use the queries unless it modified to current design.
    Hope this helps
    Regards
    CSM Reddy

  • On an iPhone 5 how do you change the App Store Apple ID?

    on an iPhone 5 how do you change the App Store Apple ID? I had to change from an old Email ID to a new one - but I can not get the Apple ID on my phone to change.

    Let me add this - I'm trying to Update App's on my phone(also my iPad) shows that I have 11 apps to update - Update all - it comes back with Apple ID Password - shows old Email......

  • How can i change the country in apple store but i have 0.70 cent ? how to remove the 0.70 cent ?

    how can i change the country in apple store but i have 0.70 cent ? how to remove the 0.70 cent ?

    Click here and ask the iTunes Store staff to zero your account balance.
    (103747)

  • Input Enabled Query - Web Template - Not able to change the key figure.

    Hello IP Gurus,
    This is a simple question .
    I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
    I attached the query to a web template.
    When I execute the template I am not able to enter or change the key figures.
    Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
    Thanks
    Senthil

    HI Senthil,
    Please ensure that u have enabled the property  " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
    For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
    regards.
    Shafi.

Maybe you are looking for