Changing the lcd-lens on nokia 6280

I have a nokia 6280 and the lcd screen's Lens are broken (cracks all over the it!)
I bought a replacement lens on the internet.
To the problem, How shall I change it properly?
Please help me!Message Edited by edvini on 03-Dec-200703:52 PM

These parts are not conceived to be user-replacable, you should have the phone repaired by a Nokia service point rather than attepting it yourself - especially if the phone is still covered by its warranty.
This repair will not be covered by the warranty, so you would have to pay for the repair, but if you attempt it yourslef and something else goes wrong with the phone you will be without warranty.

Similar Messages

  • I changed the Lcd   Digitizer on my Iphone since that the light of the screen blinks but stays off, I connect to Itunes and Itunes connects it

    I changed the Lcd +  Digitizer on my Iphone since that the light of the screen blinks but stays off, I can connect to Itunes and Itunes connects with the Phone.
    I don't know what's causing the problem.

    Sounds like something is broken. Unfortunately, it's no longer eligible for a discounted out of warranty replacement. Find a competent repair shop or buy a new phone.

  • 3D Doesn't work after changing the LCD Screen

    Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
    The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
    everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
    How can i activate again the 3D or Where is the problem?
    Thanks.

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • How do you change the light settings in Nokia C3

    The light is too bright and I don't know how to change the light settings  Help me please! 

    It would be very useful to have this feature, but it's a fixed setting in many Series 40 phones. You cannot change brightness on the C3.
    Nokia Lumia 520 3046.0000.1329.2001 RM-914
    Nokia Asha 302 V15.09 22-05-13 RM-813

  • Is it possible to change the RAM on my Nokia Lumia...

    Hello! I've got a question about the phone in the subject. Is it possible to buy a Lumia 630 and change the RAM in it? I've got a broken Lumia 820, and it would be great if I could put the 1 GB RAM from the 820 to the 630. Is it possible?
    Moderator's Note: We have changed the title into a subject-related title. This is to keep the forum organized and let other community users easily see and respond to this post.
    Solved!
    Go to Solution.

    No it is not possible.
    Moderator's Note: We have changed the title into a subject-related title. This is to keep the forum organized and let other community users easily see and respond to this post.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Change thes snooze time for nokia 1661 ?

    Hello guys, I know I have this really old cheap phone, but I like it that way..... anyways I was wondering if anyone knows how to change the snooze intervals on this? I see that it's default 10 minutes, is there any way to change it? I remember seeing an option to edit that.
    Thanks!

    Try in
    menu
    settings
    phone settings?
    "Freedom is the only way, yeah!"

  • Changes the LCD density on my Lenovo S6000l and now im stuck in a boot loop

    I used a program called LCD Density to change my dpi from 160 to 200.
    It asked me to reset and i did and now im stuck in a boot loop.
    Anything that i can do to fix it.
    I did a factory reset but that didnt worl.
    Please, i dont know what to do.

        I'm sorry this is still happening crimsong19! If you have the Extended Warranty, it's for the life of the phone as long as it's activated on your line. However, if you remove the battery, like you said, it will void the warranty. At this point, you can try reaching out to Motorola to see if they can better assist with this. They may have a good solution. You can reach them at http://www.motorola.com/us/home
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Nokia 6280 the back falls off very easily

    Hi
    The back on my Nokia 6280 comes off very easily. Sometimes I come to take it out my pocket and it has come off - surely this isn't the norm - is it?

    No - that is not normal. That the phone to a repair shop that is authorized to work on Nokia Phones and ask them to fix it for you.

  • Nokia 6280 - Flight mode

    Hello,
    In the User Manual for Nokia 6280, on page 59, it's written that this phone supports the Flight Mode.
    User Manual: http://nds1.nokia.com/phones/files/guides/Nokia_6280_UG_en.pdf
    However, I don't see such a choice in my Profiles list. Can anybody suggest me how to enable it?
    Firmware version: 3.81.
    Phone is bought from T-Mobile Germany.
    Thanks in advance,
    Lau

    At this time, you will have to take your handset to a local Nokia service centre/point.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • My iPhone 4s fell down and the LCD turned blue and black stripes line, is it still covered by the warranty?

    My iPhone 4s fell down and the LCD turned black and blue stripes and the warranty is still active.
    My question is, is it still covered by the Apple? How to fix it without changing the LCD?

    Accidental or wilful damage is not covered by Apple's standard or extended warranty. AppleCare + does cover this kind of damage for a small fee.
    When taking the phone to Apple for repair Apple will not replace the faulty part. They replace the whole phone. However some stores may offer screen replacements.

  • How do you change the start-up screen

    Hi, as my nick states, I'm new here. I'm new to Nokia too and I got an 2760 (I know not the latest model) as gift. Since the battery from my old phone is almost ruined, I'm using it. What baffles me - in the manual I can't find how to change the start-up screen (Nokia) or better, how to block it. This was possible with my old one, but with this one?
    To make matters even more complex - it used to be a T-Mobile model (I'm no T-Mobile subscriber) and the menu differs even from the (very short) manual...
    I'm lost - can anybody help?
    Thanks!!
    Solved!
    Go to Solution.

    this cant be disabled ,check out the web for latest user guide
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Do I need to get an inverter or just the lcd screen?

    I tried posting before and it didn't show up, so here I go again.  I broke the screen on A1350S4527 laptop.  I am able to hook it up to an external monitor and it works fine.  I have looked at posted instructions online for replacing the screen and one seems to suggest that some Toshiba models require the replacement of both the lcd screen and inverter if the screen is broken.  Is it necessary to replace both on this model?

    If u broke lcd only, turn it on and see if still have backlight on,
    you need to disassembly the lcd to see if inverter was packed-fit inside lcd frame.
    Most of laptop did not packed the inverter inside lcd frame.
    Anyway, what tipe of you lcd ? LED or Lamp?
    I never deal with lcd with led but with lamp, and most of them I just change the lcd, not inverter
    Hope this help...

  • Broken screen on Nokia 6280

    Help - I broke the screen on my Nokia 6280 and want to connect by bluetooth to try to retrieve some information. Could someone please tell me what keystrokes I need to use to switch on bluetooth?
    Thanks in advance

    Middle button for menu, press up then right, then the middle button to select, go 6 down and press the middle button to select, then select again, then select again, then up then select.
    Now bluetooth is turned on.
    Nokia N95
    V 20.0.015
    0546553

  • Blackberry curve 8520 lcd lens problem

    hi guys. i'm having a problem with my bb curve 8520. there's a circle in the middle of the lcd and it's because of the lcd lens. here's the photos guys:
    http://s1272.beta.photobucket.com/user/patrickjcastro/media/Snapshot_20121117_2.jpg.html?sort=3&o=0
    http://s1272.beta.photobucket.com/user/patrickjcastro/media/Snapshot_20121117.jpg.html?sort=3&o=1
    http://s1272.beta.photobucket.com/user/patrickjcastro/media/Snapshot_20121117_3.jpg.html
    hope you guys help me  fix this thing.  

    Hi patrickcastro
    Welcome to BlackBerry Support Community Forums
    How old is your device ? If it is still under Warranty I suggest contact your Carrier or Service provider and ask for replacement or repair . Because the circle that appear on your screen on that third link  is not good and its not a software issue but problem within the LCD screen. If you don't have warranty then visit any good mobile repair shop and replacing  that scrren might help.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Replacing the LCD panel in my 23" Apply Cinema monitor (A1082)

    Hi,
    I have a 23" cinema screen (A1082) which has a cracked LCD panel. I've order a replacement LCD panel but how do I take my existing monitor apart in order to change the LCD panel out? There doesn't appear to be any screws to dismantle the screen...... thanks

    1) Using a thin tool like a screwdiver, pry off the side plastic strips from the top down. Older units are harder as the glue is applied more generously. It helps if you warm it first, lets say with a blowdryer.
    2) It is easier if you remove the stand hinge pins using a 6mm allen wrench. You can probably get away skipping this step if you don't mind more work later.
    3) With a small phillips head, remove the side retainer brackets.
    4) At the bottom where the clamshell joins, pull a small tab which slides a hooked retainer releasing the clamshell. Older units may have one on each end, newer units have one at only one end.
    5) Pop apart the clamshell and slide the guts out.
    Good luck finding replacement parts for these. Mine has a logic board that died in a power failure and I am stuck with finding a broken display and buying it for the working parts. Unfortunately Apple does not sell the parts to end users.

Maybe you are looking for

  • 10 GBs of "other" space used, other (in this case) isn't anything

    i already had to send back on 3G, and since i got the replacement i've had to restore it twice, and it has yet to make a new backup for me, it starts but never finnishes. the issue, when i sync(ed) the last time after restoring, it started sizing the

  • Parallel sequence-Process Industry

    Hi All, Following is the scenario req in SAP Stage-1: Crude prep- (Done in 10 reactors, R1, R2,R3......R10)-Parallel sequence Stage-2  Pure prep- Done in single Reactor (P1) Stage-3  Storage-(4 silos) Stage-4 Packing How to address this in Master rec

  • RBAC or Mailbox impersonation setting

    We use a product from Sherpa Software called Archive Attender to archive message content off to a different server and leave a stub in the message that allows the user to retrieve that content.  I have a user called Super that is a member of the doma

  • Multiple account assignment screen in MIRO

    hi, where is multiple account assignment screen in MIRO.i am not finding the option even if i switch the layout as  account assignment cost centre. thanks

  • Where is my mail on osx mavericks desktop

    I have updated to osx Mavericks but some of my mail boxes I have created for saved mail, is gone. Can I by any means find them on my desktop? How?