Changing the logic song length

it seems i've moved the white line box at the top of the arrange / bar listing as far right as it wants to go - i think it's around 2137 bars
is there any way of making it go further to the right?
changing a song length setting maybe?
thanks
dual g4 Mac OS X (10.4.6)

Once again i have solved my own problem, just bring the tempo of the song down to extend the song length
thanks to me and everyone that spent there time on this thread
thanks

Similar Messages

How do I change the fixed song length in iTunes?

I have a song that's 6:50 in length, but iTunes reports it as 5:42. It plays the whole song OK, but freezes the progress bar at the 5:42 mark with "time remaining: 0:00" displayed on the screen for the final 1:08. Also, no matter how many times I listen to it, the song is never marked as "played."
It bugs me. How do I change it?

Try this -> http://www.willwap.co.uk/Programs/vbrfix.php

Changing the logic

Hi all,
I need to change the logic in start routine for an Infocube.Any data before JAN-2000 should be loaded using the first (old logic), starting from JAN-2000 the new logic should be used to load.
How can I use TVARV to do this?
Can you please explain what to do STEP-BY-STEP with necessary codes?
Thanks a lot.
H.

Once again i have solved my own problem, just bring the tempo of the song down to extend the song length
thanks to me and everyone that spent there time on this thread
thanks

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

TS4088 I have changed the logic board in Apple genius bar

I have changed the logic board in Apple genius bar after updated to 10.6.8. Updated to 10.7.2 but now way BSOD never solved except after changing the logic board.
Can I update to 10.8.3 or as I read in the communities, the BSOD will return again? If it happens, I guess Apple will not change it to me again.

I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

Changing the logic to calculate score

Hi!
Score of the KPI(KPI1_TARDEV) is calculated based on some logic. I need to change the logic for some 100 KPIs using command instead of right click on the Variable and then selecting 'Logic' and then editing. This is very difficult beacuse there are more than 100 KPIs for which i need to change the logic.
Is there any command like SET VARIABLE to change the logic to calculate the score?
For example:
Currently all the Achievement KPIs have score calculated based on the formula KPI1_ACT%KPI1_TAR.
I want to change it to
KPI1_TARDEV
IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100 OTHERWISE = KPI1_ACT%KPI1_TAR
can i use command some thing like below?
set vvariable logic KPI1_TARDEV AS
KPI1_TARDEV
IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100 OTHERWISE = KPI1_ACT%KPI1_TAR
Thanks
Praveen

Hi Praveen,
I was faced with a similiar situation, please search the SSM forum for this thread: "Customer exit - Cube Builder SSM".
Read the whole thread.
Thanks,
Tsholo.

Changing the logic board

will I lose my apps in my macbook pro if I change the logic board? For example, I have Logic Pro 8 on my macbook pro. My mac didn't turn on anymore, I went to the Apple store and they told me that I need to change the logic board. If I get the logic board fix, or replaced, will I lose my apps (Logic Pro 8) or will the app still be on there? Please respond because I don't want to lose my projects and the software.
Thanks

Not off topic ... this is *YOUR* post ...
To start, you can sell your old one for the parts that still work (SuperDrive, display, ...). Gives you some money back on a new one.
And PLEASE do not read my following statements as "just pay to fix it" ... I am just stating facts and I for one would probably buy new and sell old for parts
Second ... *most* new units come with Lion, and due to the firmware (PCs have BIOS on EPROMs, Machas "EFI Firmware), getting anthing less than Lion to run is tricky (just look up the number of existing posts on this subject). Some have successfully pulled it off, but it all sounds complicated and I like haing an SL-initial unit.
But do not despair ... some people have hoarded stocks of MBP that can easily run SL because they actually came initally with SL so gray install disks come free. If you start a post asking who knows these vendors, you should get an answer.
Also ... with apologies if you did not know this (as if you had no read anythingthing else I wrote) ...
Lion does not support PPC software anymore because Rosetta is not supported. Could be higher software replacement costs if you do not intensely look for one of the few SL-initial MBP.
If you want to and want to avoid Lion (I have no valid opinion on why you should ... just saying if you want to) then start a thread on "Who knows the venors of existing pre-Lion MBP?".
I only mention the Lion issue because even if you put your old HD into an external enclosure, Lion-ready systems may not boot off that old system with applications you already have installed, and you wold be reloading all apps anyway.
I will stop so you can catch up, and ask more.
Or just jump straight to my recommended post and ask your question about saving old HD and SL-ready MBPs.

I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

Try double clicking the Home button and then swipe the bottom row fully to to the right to get to the music control

Why does iMovie for iPad shorten the background song length after adding a photo?

Why does iMovie for iPad shorten the background song length after adding a photo?
I created a project a few months ago, and iMovie worked as it always had. I would create a project, add a background song, then add photos to fill up the song.
When I created a project today, I added the background song (4m9s), then added a single photo, and the background song length was shortened to 6 seconds. I have never seen the app work this way. I know I can extend the photo to the length of the background song, but it used to be so much easier to add photos and sync them with the music as I desi
I'm using iPad2 with iMovie v1.4.1.
Thoughts?

When I've added photos to a project they are added to a default time to appear. Honestly I've never looked at the time but 6 seconds sounds close. I'm guessing that since you added the photo after you add the music that its thinking you want the two to match in time length so it tunicates the music. Try adding the photo first then add the music. Good luck!

Change the Default Gap Length?

Is there a way in X to change the default gap length from 3 seconds to some other length?
(Yes, I know I can change it within the project via Control+D).
I'm talking about the Default. (Like could be done in 7).

No.

My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
This is reality. Best get used to it because it won't get any better.

Is there a way to change the actual song file but keep the 'info'?

I have a compilation that took me a really long time to edit (by which I mean put the date for each individual song in because they were all released different years becaues it's a Bob Dylan compilation and I have smart playlists for each decade from the 50's upwards) and I want to change the actual file in itunes but keep the data, is there any way? It'd take ages to do again because it's a 3-cd album. I'm trying to change the file because the one I have is approx 200kbps bit rate and i want to have a different, 320kbps version that i've downloaded. I've tried opening the file in explorer and deleting it so that i can 'locate' the file again to the one i want to replace it with, but it changes the song title, album artist, and tags etc to the new file, whereas i thought it would just retain the information but change the actual file it played.
i've had a really hard time explaining this i'm sorry if it's unclear. i was just wondering if there was any way to avoid the painstaking process of googling each song to find its release date and manually entering it when i already have a perfectly organised album.
i can't find anything anywhere about this, presumably because i've no idea what the key words for the search would be, so i'm sorry if this is common knowledge.
thanks in advance

VBR vs. CBR isn't a concern as far as the strategy is concerned. As given it is slightly easier if the replacement files have exactly the same files names and folders as the files they are replacing (case doesn't matter) but if that isn't possible we can work around that too.
Not my area but I think CBR gives larger files and less processing overhead for the same quality, which is a somewhat nebulous term. I'm not sure there is any real benefit.
Yes a script is just another kind of a program.
iTunes gives each track in the database a unique ID and knows the path that the file is supposed to live on. If you replace the original file with a different file of higher bitrate that has the same filename then iTunes will use that new file next time it wants to play the track. When it does so it will also read the tag and update itself if any of the information is different.
The original function of the ExportImport script was to help someone else rescue play counts from an old library database. If works by scanning through selected tracks and writing out a text file that contains an ID for each track and the data that wants to be copied back later.
Here is a sample output from the export:
<#>iTunes Metadata - Exported 19/12/2012 20:03:58
<ID>E5C69360-306A28AF
<#>AC-DC\AC-DC Live\1 Thunderstruck
<Plays>12
<ID>7C1D487C-3414298C
<#>AC-DC\AC-DC Live\2 Shoot To Thrill
<Plays>12
<ID>0DCF32CE-1079174E
<#>AC-DC\AC-DC Live\3 Back In Black
<Plays>15
Each block consists of the iTunes track ID, a comment so we humans can see which track this is, followed by one or more properties. I can write you a custom version of this script but I need to know exactly which properties you need to save and then restore. For example Name, Year, Genre, etc. You need to compare a new and old version of one of your songs and work out which fields need resetting in the new song to make it match the old one.
Having saved a file with the information that would otherwise change, you can then delete the older copies of the file, or better yet move them to a backup location, then copy in the new versions. If the filenames match iTunes will "see" the new files automatically, otherwise my FindTracks script can normally fix the broken links. Once iTunes is connected to all of the new files you drag and drop the saved text file onto the ExportImport script to run the import phase. This applies the saved data to each track in turn.
tt2

TS1424 I downloaded an album, but most of the songs are incomplete. The itunes list shows the appropriate song length, but the actual songs are not completely downloaded - meaning it does not give me the option of finishing the download.

I purchased a complete album, but most songs are only about a minute in duration rather than their actual lengths. The times showing indicate the full song was downloaded, but in reality, its like listening to a sample. I want to get entire songs, but the itunes list shows it as downloaded, so it does not seem to give me the option to download again. I sure would like to get what I paid for. Any suggestions?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I have a siebel application in english and i do have built the framework in oats,now if the application changes to arabic , do i need to change the logical name of the object?

Hi
Iam currently working on OATS automation for siebel application.
I am having the marketing site in siebel in english language currently and i have developed framework for the same.
Now, customer is changing the marketing site from english to arabic, now my question is will the logical name of the objects change?
do i need to again build the Object repository for arabic as well or will the logical name remains the same?

Hi,
If you developed framework based on objects id, then that will work.
If you used text of objects to identify them( say example click on a link with text 'SignUp') then script will fail - fail to find object with text mentioned in script
Regards,
Deepu M

Cant change the next song through home sharing

i got my ipad mini yesterday. when i try to play songs on my imac itunes through home sharing. i can only play the entire playlist. i could not select /change a particular song. though i can see them on the screen.

Go to iTunes menu Store > Authorize This Computer and sign up with your Apple ID and password

Changing the logic song length

Similar Messages

Maybe you are looking for