Changing the logic

Hi all,
I need to change the logic in start routine for an Infocube.Any data before JAN-2000 should be loaded using the first (old logic), starting from JAN-2000 the new logic should be used to load.
How can I use TVARV to do this?
Can you please explain what to do STEP-BY-STEP with necessary codes?
Thanks a lot.
H.

Once again i have solved my own problem, just bring the tempo of the song down to extend the song length
thanks to me and everyone that spent there time on this thread
thanks

Similar Messages

  • TS4088 I have changed the logic board in Apple genius bar

    I have changed the logic board in Apple genius bar after updated to 10.6.8. Updated to 10.7.2 but now way BSOD never solved except after changing the logic board.
    Can I update to 10.8.3 or as I read in the communities, the BSOD will return again? If it happens, I guess Apple will not change it to me again.

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • Changing the logic to calculate score

    Hi!
    Score of the KPI(KPI1_TARDEV) is calculated based on some logic. I need to change the logic for some 100 KPIs using command instead of right click on the Variable and then selecting 'Logic' and then editing. This is very difficult beacuse there are more than 100 KPIs for which i need to change the logic.
    Is there any command like SET VARIABLE to change the logic to calculate the score?
    For example:
    Currently all the Achievement KPIs have score calculated based on the formula KPI1_ACT%KPI1_TAR.
    I want to change it to
    KPI1_TARDEV
    IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
    IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100   OTHERWISE = KPI1_ACT%KPI1_TAR
    can i use command some thing like below?
    set vvariable logic KPI1_TARDEV AS
    KPI1_TARDEV
    IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
    IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100   OTHERWISE = KPI1_ACT%KPI1_TAR
    Thanks
    Praveen

    Hi Praveen,
    I was faced with a similiar situation, please search the SSM forum for this thread: "Customer exit - Cube Builder SSM".
    Read the whole thread.
    Thanks,
    Tsholo.

  • Changing the logic board

    will I lose my apps in my macbook pro if I change the logic board? For example, I have Logic Pro 8 on my macbook pro. My mac didn't turn on anymore, I went to the Apple store and they told me that I need to change the logic board. If I get the logic board fix, or replaced, will I lose my apps (Logic Pro 8) or will the app still be on there? Please respond because I don't want to lose my projects and the software.
    Thanks

    Not off topic ... this is *YOUR* post ...
    To start, you can sell your old one for the parts that still work (SuperDrive, display, ...).  Gives you some money back on a new one. 
    And PLEASE do not read my following statements as "just pay to fix it" ... I am just stating facts and I for one would probably buy new and sell old for parts
    Second ... *most* new units come with Lion, and due to the firmware (PCs have BIOS on EPROMs, Machas "EFI Firmware), getting anthing less than Lion to run is tricky (just look up the number of existing posts on this subject).  Some have successfully pulled it off, but it all sounds complicated and I like haing an SL-initial unit.
    But do not despair ... some people have hoarded stocks of MBP that can easily run SL because they actually came initally with SL so gray install disks come free.  If you start a post asking who knows these vendors, you should get an answer.
    Also ... with apologies if you did not know this (as if you had no read anythingthing else I wrote) ...
    Lion does not support PPC software anymore because Rosetta is not supported.  Could be higher software replacement costs if you do not intensely look for one of the few SL-initial MBP.
    If you want to and want to avoid Lion (I have no valid opinion on why you should ... just saying if you want to) then start a thread on "Who knows the venors of existing pre-Lion MBP?".
    I only mention the Lion issue because even if you put your old HD into an external enclosure, Lion-ready systems may not boot off that old system with applications you already have installed, and you wold be reloading all apps anyway.
    I will stop so you can catch up, and ask more.
    Or just jump straight to my recommended post and ask your question about saving old HD and SL-ready MBPs.

  • My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

    I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

    I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
    Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
    This is reality. Best get used to it because it won't get any better.

  • I have a siebel application in english and i do have built the framework in oats,now if the application changes to arabic , do i need to change the logical name of the object?

    Hi
    Iam currently working on OATS automation for siebel application.
    I am having the marketing site in siebel in english language currently and i have developed framework for the same.
    Now, customer is changing the marketing site from english to arabic, now my question is will the logical name of the objects change?
    do i need to again build the Object repository for arabic as well or will the logical name remains the same?

    Hi,
    If you developed framework based on objects id, then that will work.
    If you used text of objects to identify them( say example click on a link with text 'SignUp') then script will fail - fail to find object with text mentioned in script
    Regards,
    Deepu M

  • How many times did you change the logic board?

    Hello everybody,
    I"m the formerly proud owner of an iBook G3. Solowly I"m getting tired of the logic board problem. I have AppleCare, but by now I"m sending my iBook twice a year for repair!
    By now I had my iBook sent to Care 5 times due to the logic board problem.
    Now I"d like to know if this is average, low or high ranking on the G3 exchange scale,
    Who can beat 5?
    Michael

    Michael,
    Mine has been back three times.
    If your iBook's logic board goes out again, I recommend that you call Apple and, instead of talking to Customer Support, immediately ask for Customer Relations. Be prepared with dates and details of your iBook's repair history, tell them you need a computer that is dependable, and your iBook just isn't. Then ask for a replacement. It has been known to happen.
    Good luck.

  • Is it possible to change the Logical System name in ID

    Hi,
    I am doing a file to Idoc scenario. My requirement is to overwrite the logical system name, which is set in SLD for sender (system). Is it possible to overwrite it in ID or in mapping somewhere.
    Thanks,
    Dehra

    Hi Dehra,
           Go through the below help file of SLD. It will give you information regarding logical name as well:
    <a href="http://xiserver:50100/sld/doc/sld.pdf">http://xiserver:50100/sld/doc/sld.pdf</a>
    Regards,
    Subhasha

  • Can the fan be replaced without the need of changing the logic board and everything else they said(total of $750)??

    my mac air have some physical damage , the fan seems not no be working, when they runed the test it is what it showed , now they are telling me that they need to relace evrything, even if is not damaged. The incident hapened  week ago , i had not experienced any overheating problems , or any issues.
    I didnt knew the damage on the fan till they runed the test.
    Is it possible that by changing just the fan would be just enough for not cause any future damage on the rest of the comuter???
    even that before today , i didnt noticed any truoble with it.....
    i sudgested that to the genius bar guy , n he said that "there they just dont provide that service"......

    So the first was ruined from a spill.
    and the second one.......?
    You list a MacBook Air (13-inch Mid 2013)
    it would still be under warranty IF it was warranty work,  is it?  Or did you ruin it with another spill?
    Seems you need portable insurance for spills / accients etc.
    for drops, accidents, spills, loss, or theft, purchase a TYPE of insurance called "inland marine insurance"
    roughly $30 per year for a device(s) with 0 deductible, used same for over 20 years, same insurance the pros use on their portable devices.
    very cheap, very useful insurance, most people dont know about same.
    http://en.wikipedia.org/wiki/Inland_marine_insurance

  • Changing the logic song length

    it seems i've moved the white line box at the top of the arrange / bar listing as far right as it wants to go - i think it's around 2137 bars
    is there any way of making it go further to the right?
    changing a song length setting maybe?
    thanks
    dual g4   Mac OS X (10.4.6)  

    Once again i have solved my own problem, just bring the tempo of the song down to extend the song length
    thanks to me and everyone that spent there time on this thread
    thanks

  • Pricing recalculation in ECC - how it is done and Exit to change the logic

    Hi all,
    I have  a issue relatedto PO's created(rather replicted) in ECC system from SRM system.When the PO's are replicated from SRM,the pricing is recalculated in R/3 based on DEAFULT setting.Nw when the tax code is changed in SRM PO,the changes are reflected in R/3 PO but  pricing is recalculated cosnidring the default tax code and not the new tax code which comes from SRM!
    What do i do so that the ECC system knows that it should use the New tax code and not the deafault one maninatined.
    Is there any User EXit/BADI in ECC where I can set the indicator wherein system willconsider the new tax code for price recalculation?

    Hi Experts,
    Any suggestions?

  • JDBC to Idoc scenario - change of logical system name

    Hi,
    I have a JDBC to idoc scenario that worked. Now i had to change the logical system name from my sender system from ABC_123 into ABC123 in the SLD (Business System - Integration - Logical System name). I did so and also refreshed my Cache.
    Afterwards I started the process, but it failed in the Receiver system. The idoc is correct expect of the partner name. My receiver system expect ABC123 - as I changed in the SLD - but PI send ABC_123.
    If io look in SXI_CACHE - Services my Business System still got the "old" name (ABC_123).
    Did i miss something resp. how can i load the current configuration from SLD?
    Thanks in advance
    Michael

    Hi Michael,
    Again Import the changed logical system in the Integration directory of you PI system.
    And check the scenario (Sender Agreement, Receiver agreement ) what system they are reflecting.
    If they are showing old system then you have to replace the business system in all the scenario.
    Edited by: Rajhans Abhay on Jan 7, 2010 3:14 PM

  • Error in the logical system (BW - R3 connection)

    Hey guys, i need help, actually i created a connection between BW and R3 system, but i think i wrongly assigned the details to another BW system and now whenever i tried to load the data, it's not being processed.
    And i checked and it shows me that the connecetion is between source system (538) and BW (B3T800), though my BW client is BW (BW TEST). so how do you think i can change my background users i assigned while creating the source systems, because i think, while creating the source system, i used wrong background users. So instead of connecting via logical system (BW test), its connecting via (B3T800) to SAP R3 (538).
    --> Also i tried changing the Logical system name, as i checked and showed that for my BW client now it has a entry of the BW system (B3T800) and when i tried chnging it, it let me change that, but when i went to the RSA1, SAP doesn't let me access that, saying a message "your logical system has been changed", so can i change the logical system, do you guys think my problem will be solved?
    Regards,
    Amit Jaidka

    I have checked in SM37 taking that request number and when i checked the job log , its showing
    5 LUWs confirmed and 5 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    Lock table overflow
    Job cancelled after system exception ERROR_MESSAGE
    what is the reason for this termination in R/3.
    Thanks

  • Use and impact of the logical system (SCC4)

    An error has been made in our SAP system (production environment), transaction SCC4. The field «Logicial system» has been changed from «PRD460» to «QAS460». It has been left this way for few weeks and when we realized the mistake, we changed it back from «QAS460» to «PRD460».
    For few hours, the document numbers in MM (t-code MIGO) were generated, but were not found in t-code MB03. We were able to generate them manually in t-code SM13 and the problem was solved.
    What is the use of the «Logicial system» ? What could have been the impact on our database and on the integrity of our system of having the wrong logical system set to our production environment for few weeks ?
    Thanks.

    Hi,
    Logical System Names
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Anil

  • Not converting the logical system through BDLS

    Hi Experts,
    I did the system copy of BI system from production to developemnt
    To change the logical system  in RSA1 --> Source systems
    I have choose client role as test in scc4 and in tcode BDLS i have given the old logical system name new  logical system name
    after completing the job RBDLSMAP i checked in the RSA1 there is no change in logical sytem
    i got the following message
    SM37 log
    Job started
    Step 001 started (program RBDLSMAP, variant &0000000000005, user ID ABCD)
    Logical system name ABC500-1 does not match SAP's recommendation
    Job RBDLSMAP no longer exists
    Converted table: 'RSSTATMANSTATUS'; number of changes: ''
    Converted table: 'RSSTATMANSTATDEL'; number of changes: ''
    Converted table: 'RSSTATMANREQMAP'; number of changes: ''
    Converted table: 'RSSTATMANREQMDEL'; number of changes: ''
    Converted table: 'RSSTATMANPSA'; number of changes: ''
    Converted table: 'RSMDATASTATE_EXT'; number of changes: ''
    Job finished
    Spool log
    Table Name                Field Name       Number of Relevant Entries    Number of Converted Entries
    /BI0/ABP_CUST00*          LOGSYS                              0                              0
    /BI0/ABP_CUST40*          LOGSYS                              0                              0
    /BI0/ABP_VEND00*          LOGSYS                              0                              0
    /BI0/ABP_VEND40*          LOGSYS                              0                              0
    /BI0/ACDS_DS0400*         LOGSYS                              0                              0
    /BI0/ACDS_DS0440*         LOGSYS                              0                              0
    /BI0/ACDS_DS0500*         LOGSYS                              0                              0
    /BI0/ACDS_DS0540*         LOGSYS                              0                              0
    /BI0/ACLM_DS0300*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0340*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0600*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0640*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACRM_CMGL00*         LOGSYS                              0                              0
    /BI0/ACRM_CMGL40*         LOGSYS                              0                              0
    /BI0/ACSM_LINK00*         LOGSYS                              0                              0
    /BI0/ACSM_LINK40*         LOGSYS                              0                              0
    /BI0/AGN_BP00*            GN_PAR_LSY                          0                              0
    /BI0/AGN_BP40*            GN_PAR_LSY                          0                              0
    /BI0/AGN_CONV00*          LOGSYS                              0                              0
    /BI0/AGN_CONV40*          LOGSYS                              0                              0
    Could any body help me in this
    Thanks & Regards,
    Arun

    Hi experts,
    I have done the system copy form Production to Developement.
    Transfermations and DTP(Data transfer process) are still connected from Produciton R3 which  should be from developemnt R3.
    I have tryied to change the logical sytem name through BDLS. But the logical system name is not changed
    i got the job log which is in above conversation in my thread.
    Please let me know how to change the logical system name in Transfermations and DTP in RSA1
    Thanks & Regards,
    Arun

Maybe you are looking for