Changing the LSO Content Player user interface

Hello,
Does anyone knows how the changes to the CP user interface can be made?
I found some information on the subject in the SAP Note 805425, but couldnt apply the
modifications.
Can anyone please help?
Regards,
Hubert

Hello,
The note itself doesnt correct any problems. It explains however how to change
the interface but so far I was unable to do so.
Regards,
Hubert

Similar Messages

  • Remove the toolbar for the LSO Content Player Window.

    Hi All,
            We are implementing SAP LSO. In the BSP Application HCM_Learning, I am able to run the course by clicking on link 'Start Now'. The BSP page related to this is "Training Home.htm".
    Now a new window popup up ( ie) the content player popup in a new window and plays the course. I want to remove the toolbar from this new popup window.
    I changed the toolbar value from yes to no in the Function Popup() defined .
    function popup(t, b)
             thePopup = window.open (b,t,"toolbar=no,menubar=no,width=300,height=250,scrollbars,resizable");
              thePopup.focus();
    But still i'm getting that toolbar in the popup window.
    How can i resolve this.?
    Please give me your valuable inputs.
    Thanks,
    Eben Joyson.

    Hey Ravi,
    Thanks for sharing your perspective. 
    After thinking further about the real estate question, I believe that, at least in the US, most instructional designers aim to present content at 800x600 pixel size.  This accounts for differing monitor sizes, etc.  If this is the case, then good instructional design (e.g. don't put too much content on a screen at once) should assure that content could be played in-line (in the BSP page).  Since the navigational controls are at the bottom, that wouldn't have any effect on width of the page and could also be accommodated.
    I'm still of the opinion that SAP LSO (and all leading LMS systems) should evolve to presenting content in the base window.  Perhaps there are some extreme exceptions where the extra real estate would make a true difference.  In that case, perhaps the learner should be offered an LSO learner setting where they can choose to display content in-line or in a separate window....let them decide   Alternatively, one could offer the Training Administrator an infotype setting where they specify whether the content should be displayed in-line (default) versus in a separate popup (this could be used on an exception basis).
    Gary
    Edited by: Gary Pearl on Oct 29, 2008 9:25 AM

  • Changing the email Content for the Contact Person Creation

    Dear All
    We are on SRM 7.0. We need to change he mail content that goes to the Contact Persons of Vendors. These contact Persons are created in SRM for bidding.
    How to change the email content?.
    Thanks in Advance.
    velu

    Hi,
    Pl. follow the following steps :-
    1. Create smartforms containing your own content to be sent to contact persons.
    2. Implement the BADI : BBP_OUTPUT_CHANGE_SF.
    3. There is one interface(method) in the above BADI e.g. :change_forms.  You have to call smart forms in this interface.
    I hope you may achieve your task by following the above steps.
    regards
    HARSHB

  • Is LSO content player on an independent server?

    We try to install/configure LSO.  When it comes to the content player, we are not sure whether it is an add-on to ERP or EP.
    Would you please explain ? Thanks!

    Hi,
    The Content Player (LSOCP), is based on a Java Platform, so you have to install it and configure in your SAP J2EE Engine.
    Depending on your ERP version (i suppose 6.0.X), you have to install the corresponding version;
    - LSOCP 600 (no EHPs)
    - LSOCP 602 (With EHP2)
    - LSOCP 604 (With EHP4)
    Follow this thread to solve some issues after installation:
    Unable to play content in LSO Content Player.
    Regards!

  • LSO content player Button Label

    Hi,
      In LSO content player, I would like to customize the button label " End Test".
    I have gone through the jsp and html pages and did not find any reference to it.
    Please suggest.
    Thanks,
    Vasudha Reddy

    Did you check in the following XML file?
    jspstrings_en.xml file : You can find it in the J2EE 630 under the following path: \server0\apps\sap.com\com.sap.hcm.ls.webapps\servlet_jsp\lms\WEB-INF\xml
    Please let me know if this helps.

  • Email Notification need anyone changes the PCD content..

    Hello,
    Can someone give me a solution for this issue.
    An email should be sent to a person if someone has changed the PCD content. Can be an iveiw property, role property, workset property etc,.
    Or if any thing is created or modified in PCD i should get an email notification that so and so content has been modified by so and so person.
    Regards,
    Krishna

    Hello Krishna,
    As far as regarding to your question there is no built in functionality with portal. Email notification for subscription and notification service can be configured in the portal as:
    Sys admin - System Configuration - Knowledge Management-Content Management - Utilities-channels - email channels  by this you can configure the communication channels available in the portal. However this is used to send information to the users.
    Also the email notifications are used in the User Management where the user profile changes can be tracked by the Administrator, similarly for tasks and notification's we can configure the UWL for the email communication.
    Some of the useful links are:
    /thread/34939 [original link is broken]
    EP-Email Configuration
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2678e05a-0701-0010-fa86-ddfbec5a2b94
    Outlook Email Based Approval
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d6bdc790-0201-0010-4597-da11d5f9e5a1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41d59a90-0201-0010-ba9d-e1c5c0078a71
    Creating An Import File For UME From Excel
    In these there are threads which explain you some concepts of Collaboration rooms by which you can track the details of PCD and also like the System landscape monitoring.
    I hope this information would give you an idea as of how email channel could be used in portal where in as specific to your question i think we need to build an application and try integrate it with portal to test it.
    Thanks,
    Aparna
    'Please reward point if helpful'

  • Can I change the Home Folder of users with Group Policy (or in another centralized way)?

    I know how to change the Home folder of users from AD Users & Computers -> their Properties -> Profile tab. But this is not very practical when one has users spread across many OUs, and with users being added and removed often.
    So I am wondering whether there is a way to do the same with a GPO. The closest thing I found was Folder Redirection, with which I can change the location of particular profile folders for each user, but not the location of the whole profile.
    Is there a way to redirect the entire location of users in a centralized way, using a GPO or some other mean?

    I would recommend reading that about the management of roaming profiles: http://technet.microsoft.com/en-us/library/cc784961(v=ws.10).aspx
    You can involve the use of Powershell scripts for the management of roaming profiles:
    http://social.technet.microsoft.com/wiki/contents/articles/12460.powershell-automate-roaming-profile-folder-permissions.aspx
    http://gallery.technet.microsoft.com/scriptcenter/Check-if-an-AD-user-has-a-45ed5d1c
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Changing the EMail content for a message either failure or success

    Hi All,
    I  need some information about how to change the Email content which was sent by the system which was triggered during process chain. we want to get  the subject of the message rather than all the details which are part of default messages like
    Log for This Process:
    Log of Respective Background Job:
    and others.
    Since we are trying to send the message to Cell Phones  , just need a short message either sucess or failure.
    Is there any exit or methid to override this message to a custom message.
    Any help in this regard is appriciated.
    Thanks on advance.
    sree

    Hi,
    I know its a very old post, but I'm facing this issue now.. It would be great if you guide me.
    I'm getting the following error
    "Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 303 seconds
    BEA1-01502373650AE964512F
    Thanks,
    Girish.

  • How to change the text of a user defined field in dynamic selections?

    Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
    Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
    Found an OSS note - 86980 - that tells that this is not possible.
    But when we read the documentation on the user field (CJI3 - dynamic selections  - double click on user field - F1), it shows the following text:
    User-defined field in which you can enter general information with a length of up to 20 characters.
    Dependencies
    The names (key words) for  user-defined fields depend on the field key.
    Now the question is where to change the field key..
    Thanks,
    Ven

    Madhu - you did not get the question I think.
    Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
    Thanks,

  • Is there a way to permanently change the default video player to VLC?

    I installed the QuickTime update and now all my AVIs won't play with sound. Downloaded VLC and they will play with sound. I went to 'Get Info' on an avi and changed 'open with' to VLC and selected 'change all'. They will open and play with VLC until I re-boot, then everything changes back to QuickTime. Right now I just hate Quicktime and don't want to use it. How can I change the default video player to VLC without Quicktime changing it back when I reboot?

    How can I change the default video player to VLC without Quicktime changing it back when I reboot?
    Sounds like you changed it properly. The question now becomes, "Why isn't the change being saved?" Have you tried repairing your disk permissions? As to the original problem, it could be that the QT upgrade has rearranged the order of your stored codec components table called by QT. While this table is rebuilt each time the QT Player is opened, the table seems to be ordered from latest component installments to oldest. So there is the possibility that two (or more) components are allocated for playback of you AVI files and the wrong one now has priority. If you can find it (e.g., possibly Perian), you could simply remove it from the QT components folder and then replace it to again change the "build" order for the table. (Basically, you would need to run a component conflict test strategy here.)

  • Hi how can i change the lenguage of my photoshop interface in english instead of spanish

    Hi how can i change the lenguage of my photoshop interface in english instead of spanish

    Hi,
    You can find information here on how to change the language.
    http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
    regards,
    steve

  • Is anyone know how to run the examples in 3d user interfaces with java 3d

    hi dear ,
    I am trying to run the examples in 3d user interfaces with java 3d.
    I hope i can load the library in jcreator. but the libarary for this book are classes files , it do not have jar file for it . the jcreator do not read these classes . i do not know why ? i am wonder if there any one run these code before can give me some idear .
    thanks so much .
    the code u can get from this link.
    http://www.manning.com/books/barrilleaux/source
    thank you for u to have a look for me .
    regards
    xiaocui

    <h2>{color:red}CROSS POSTED{color}</h2>
    [t-5289810]
    Cross posting is rude.
    db

  • Has anyone seen the TestStand 3.5 User Interface disappear during testing?

    The user interface disappeared while a test sequence was executing. The Windows Task Manager showed LabVIEW (8.2) and TestStand running but nothing was present on the taskbar for TestStand and the window could not be found. This has only happened once but I am being pressed to explain this hence the question.

    plf,
    By user interface you mean an operator interface?
    If this is the case, what operator interface are you using?
    Have you seen this several times?
    What kind of sequence were you executing?
    Regards.
    Antonio Lie.

  • I can't change the view from player view to grid view in youtube

    i have a problem with youtube, i can't change the view from player view to grid view on channels that i visit, and that just happen with firefox, it dosent happen with explorer, so what can i do please?
    == This happened ==
    Not sure how often

    it didn't unfortunately, and i think that the problem in the JavaScript , Because when I click on the grid view icon i see on the bottom of the page "JavaScript" see the image:

  • What are the urls for LSO content player and offline player?

    Gurus:
    I cannot figure out these urls. Would you please give some help?  Thanks a lot!

    Hi,
    content player URL looks like this:
    https://your.portal.url/lms/mediator/courseview?sid=4B4FD433EF4900D0E10080000AFA01D1&language=CS
    Romano

Maybe you are looking for