Changing the micro SIM while travelling

I'm going to Sweden for 3 months with my Canadian unlocked iPhone4 and I have three simple questions for you experts:
1) If I take out my current Canadian micro SIM, I won't be charged for data, roaming, incoming calls, etc, right? That is, if my SIM isn't in the phone, I can't possibly connect to the network, so I can't possibly be charged for anything, aside from my monthly baseline fee that I pay for my Canadian mobile phone plan?
2) Can I get a new micro SIM in Sweden? If I take out my Canadian micro SIM, can I replace it with a Swedish one? Do the Swedes sell them?
3) What sort of plan can I expect to get in Sweden for the short term (3 months) and what carriers do you recommend?
Thanks for your help!

1) yes you wont incur any additional charges once you remove your original sim
2) you should be able to get a micro sim when in Sweden
3) I'm not familiar with any Swedish providers but you are better off getting a pay as you go sim and use that with the phone when you are in Sweden.
or if you have issues with sim sizes
you can either get a sim cutter to use the pay as you go sim within your iphone 4, and see if they have any pay as you go options with data or you can get a pay as you go phone with the plan to use temporarily as a cheaper alternative.

Similar Messages

If I buy a new wifi cellular ipad with ATT can I swap the micro sim card to other overseas carriers when traveling?

if I buy a new wifi and cellular ipad with ATT can I swap the micro sim card to other overseas carriers when traveling?

Ralph
he is talking iPad
iPads are not Carrier locked and as long as you are happy with a 3G signal
you can buy a PAYG data sim in many countries
see LTE limitations here
http://www.apple.com/ipad/LTE/
Buy from Apple Store and you can guarantee no issues

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

How can I purchase products from the app store while travelling outside my country of residence?

How can I purchase products from the app store while travelling outside my country of residence? We are from Canada, travelling in the USA and wish to buy a TV series but get a message to buy it from the Canadian store. When we tried to do this we got the same message.

According to the terms of sale, you have to be in your country of residence in order to make a purchase. I've heard of people able to make purchases outside their country and also of people being unable to do so. It appears that Apple's enforcement is not 100%.
In order to buy from the U.S. iTunes Store, you would need to have a valid billing address in the U.S., a credit card billed to that address or an iTunes Gift card purchased in the U.S. and be physically present in the U.S. at the time of purchase.
International copyright law is currently very inconvenient for the consumer.
Best of luck.

Changing the table name while drill down at the dashboard query

I have a DAY fact table that has about 1B rows.
The purpose of this table is to store on hand quantity for each item per day.
On the presentation layer I have a dashboard that will display average on hand qty per year and then user can drill down to quarter/month/week and then by day level to see the actual value at evey level.
Its hard to run aggregation on fly as all my 3 TEMP tablespace 32gb each filled and then I get error can not extent TEMP file.
So I thought I will do the aggregation at the database level and store the aggregated data in another table. So at first dashborad will read this new aggregated table to display qty at yearly. As soon as user drill down to quarter the dashbord should query the actual DAY fact table by filtering for specific year and quarter.
IS it possible? Can I change the table name while I drill down to lower level?
Thanks in advance.

Hi use,
Yes. This is possible in OBIEE. You need to use Action Links to have navigation between reports. The main idea is to have 2 analysis. One with your aggregated data by year (using your aggregated table), and another one with the rest of the hierarchy and data (using normal fact table)
You add an action link on this report, that can navigate to the second report. showing "the details" (in your case would be the rest of the time dimension).
Please refer to http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/ for actions links.
Another way is to create 2 analysis, then go to the 2nd analysis, and filter the column year as "Is based on results of other analysis" and you select there the first analysis. In this case when you click on the year in the first analysis, this value will be passed to the second analysis so you can filter the rest of the hierarchy based on the year you clicked on the first analysis.
If helpful, assign points.
J.

I got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage so i want to know the steps u take to activate the micro sim in the ipad .

i got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage as i dont have wifi in the place tat i am staying so i want to know the steps involed to activate the micro sim in my ipad.

What roaming charges? If you have a local plan there are no roaming charges. This is a major reason for using a local plan.
Contact, or visit the website, whatever local provider you are considering and get their plan details.

Do i need to remove the micro sim card when using home wi fi on ipad2

do i need to remove the micro sim card from the i pad 2 when using wi fi sat home?

thank you Ralph may i just ask you if your home wifi network is not working do you then have to actively seek the data connection?i suppose i am asking do you need to choose from a menu ?

How does the micro-sim work

hi i will more than likely buy my iphone from ebay as it is easier for me this way and i was wondering how will i be able to work it with the micro-sim and my own meteor sim card i have in my 3gs will i have to cut my sim card down to fit the iphone 4

The micro sim works the same as a normal sim card, it's just smaller. I've heard that you can cut a normal sim to make it work with a micro sim device but if you mis cut it then it won't work.

Is it possible to swap out the micro sim into a nother phone?

Hi -- I love my iphone 4, but am reluctant to take it snowboarding with me in case i fall and shatter the front or back.
Does anyone know if its possible to put the the micro sim from the iphone 4 into an older iphone.
OR
are there are inexpensive phones that take a microsim that I could use as a backup?

You're welcome.
Yes and yes.
A SIM card is a SIM card. It has been possible to use an activated iPhone SIM card with another GSM phone since day one over 3 years ago. What isn't possible is taking an activated SIM card used with another GSM phone and simply inserting the SIM card in an iPhone without activating the SIM card with the iPhone via the iTunes activation process.

HT4199 where do I put the micro sim for the iPad, dosent seem to be any where to insert the card

Where do I put the micro sim for the iPad , I cant find any where to put the card.

What model is your iPad? (iPad, iPad 2 or New iPad). Did you get the AT&T or Verizon model? If you got the Verizon model, it doesn't have a SIM slot.

HT201269 Do I need to get a fresh Sim card? My wife's 3G has the old style sim and my old 4 (that I am passing to her) has the micro-sim, they are different phone numbers - what do I do?

Good morning, this may sound dumb but I don't know how to to do this.
My wife currently has a iPhone 3g with her mobile number and the Sim card is the old style standard sim
I am transferring my iPhone 4 to her and that has a microsim with my number info on it.
Does this mean that I have to get a clean microsim for her or will all the data transfer from Itunes to the 'new' iP4.
Now, how do I actually go about doing it?
Do I take my sim out ot the iP4 and put it into the micro adaptor and slot it into her phone and back up from her machine, or what do I do - Please respond in technophobe (I'm an old duffer:-) )
Uncle H

You need to get a sim sim, activated, wirh your wife's account info on it. Your carrier should give you one for free. Either that, or you cut down your wife's existing sim. If you do a Google search you'll find instructions/tools on how to do so.
After you get the sim situation straightened out, backup your wife's 3G in iTunes. Then on your 4, turn off iMessage, FaceTime, Find My Phone & delete the iCloud account. Then: Settings>General>Reset>Erase All Content & Settings. When finished, restore from the backup you made of the 3G. Sync her content to the phone.
You should be good to go.

Wanted to change the Exchange rate while saving the PO

Hi,
I have a requirement that i have to change the value of Exchange rate while saving the PO.
Even i checked with more BADI's. but i am not able to update the new value.
Can you tell me any specific user exits available for this.
Thanks in Advance,
Best Regards,
Prabu

Solved

How can ID automatically change the business system while importing?

Hi gurus,
There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+).
You know we have to create the scenarios manually in Integration Directory since the business system is different.
The question is as below (BTW:We are using local SLD for dev,qas,prd separately):
If we don't use transport system, and only use export and import functionality, and create business system group, can we make the ID automatically change the name of business system while importing?

Hi Xinjiang,
You can follow below method.
In Quality system transport targets will be DEV(Dev pi system) ---> QEA(Quality PI system)
In Production system transport targets will be DEV(Dev pi system) ---> PEA(Production PI system)
This will ensure that you does not need to create separate request in Quality system. You can use the same request created in Dev to transport to production system. This will reduce your efforts of transportation. This is the same type of approach that is followed in ECC system as well or next solution is creating transport target in each sld system as you mentioned below,
we have three local SLD, so we need to create TS and BS for PI DEV in SLD QAS, and create TS and BS for PI QAS in SLD PRD,
Following link will help you for defining transport target.
http://help.sap.com/saphelp_nwpi71/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm

How can I change the time zone while not changing the time

Let me preface this by saying I know this may seem tiddling to many but it is somthing I am rather obsessive about.
I took many photos while I was in Los Angeles. I had changed my camera's clock and the clock in the MacBook Pro to Pacific Standard Time and my iPhone automatically did the same thing. When I loaded photos into Aperture on my MacBook Pro the time information was all correct, all photos tagged in PST. I had some photos I took on my last day that I did not load into Aperture until I got home to Denver. When I loaded these images into Aperture they still have the correct time that they were shot but now show as being taken on Mountain Standard Time. If I change the time zone in Aperture then the image time is also adjusted to be one hour earlier.
Is there any way I can change the time zone in Aperture while leaving the actual image time alone?

Hello Mark,
Aperture will display the "Date created" with respect to the time zone your system is set to, but the "Date" using the time zone the image was taken in.
You can adjustthe Time Zone for individual images either on import or afterwards using batch change:
Select the images you want to adjust, then select "Metadata -> Batch Change" from the Aperture Application menu:
Click: Adjust Time Zone
Set the Camera's Time Zone to the Time zone you set your camera to when you took the images, and the Actual Time Zone to the zone you want Aperture to use to display the date.
Regards
Léonie
P.S:
This works with most cameras, but there seems to be a bug with canon cameras when importing directly from the camera. Frank Caggiano recently started a thread, but right now I cannot find the link.

As i upgraded my phone to the iphone 4s, is my number still the same as it was before i got the micro sim?

i just wondered if my number has changed since i upgraded and now have a micro sim?? Someone help please??

Why don't you ask your carrier...

Changing the micro SIM while travelling

Similar Messages

Maybe you are looking for