Changing the Name of Cue Point Markers

Hi all!
I have a question for anyone who can answer.
I 2 items on the stage for which I have chosen to "Convert the selected properties to markers" - ( in which the selected properties are the highlighted corner pins for both items).  When I click on a marker for either item I get
Corner Pin_Lower Right
Corner Pin_Upper Right
Corner Pin_Upper Left
Corner Pin_Lower Left
How can I make it so that for one of them it displays
Corner Pin_Lower Right_1
Corner Pin_Upper Right_1
Corner Pin_Upper Left_1
Corner Pin_Lower Left_1
and for the other it displays
Corner Pin_Lower Right_2
Corner Pin_Upper Right_2
Corner Pin_Upper Left_2
Corner Pin_Lower Left_2
Any help would be appreciated!

Mylenium,
thanks so much for your response.  It has been tremendously helpful.
When I right click on "Corner Pin" under Effects, there is an option to
Rename it.
When I right click on "Scale" and "Position" - (separated into "X Position"
and "Y Position"), there is no available option to Rename it.
Any ideas?
So much appreciated!

Similar Messages

  • My husbands password was used to download Extreme 777 app. I would like to change the name and purchase point under my password, but it won't let me without purchasing new app. If I do this , I must delete current app and lose all my credits and start ove

    My husband's password was used to download app. ( Extreme 777) onto my ipad 2. I have now changed  the apple ID to my own, but I cannot use my $20.00 credit in itune on this app. It says app. was purchased under another ID and i must purchase app. in my ID. I tried going back to his ID to redemm $ 20.00, but gift cards were redeemed under my new ID, therefore leaving 0 balance under his ID. If I purchase app again, I will lose all current credits on this app. Anyway to change the name on original download or transfer credits to new app?. Thanks

    Apps are forever tied to the AppleID used to download them.
    You cannot use your AppleID to add credit to an app purchased
    under your husband's AppleID. You must either download the
    app under your AppleID (in effect starting over) or add credit to
    his account.

  • I changed the name of my imac to reflect it's new location, but inadvertently, it unchecked the box to allow the administrative user account to administer the machine.  I am trying to reinstall with a time machine backup and am unable

    I need a little help.  I changed the name of my imac to reflect it's new location, but inadvertently, when I saved the change, the system unchecked the "allow this account to administer the computer" so now I can't make any changes....  I tried to reinstall the OS, but it wants me to go online while installing and use my apple id, but this is not my iMAC, so I don't want to use my account.  Also, I am working in a building that will not allow me network access until I authenticate, which can't be done unless I open the browser first.  So I'm stuck at this point.  I can't even restore a time machine backup that I have because it gives the error message that the system encountered an error.  Any suggestions?

    Ask the admin/owner to sign in. 

  • Change the name of custom tab in me51n / me52n / me53n

    Hi,
    I have to add a few custom fields in PR item of  transactions me51n / me52n / me53n. I have used the enhancement MEREQ001 for adding the custom fields. The sytem automatically creates a custom tab with the name Customer Tab for the additional fields that I have added using the enhancement MEREQ001 while displaying in me51n / me52n / me53n.
    Now I have a requirement to change the name of the custom tab created for transactions me51n / me52n / me53n from Customer Data to Others.
    Can anyone suggest me how to go about doing this???
    Thanks in advance.
    Abhisek.
    P.S.:- Points will be be duly awarded 4 helpfull answers.

    Hi,
    I tried doing whatever you had suggested but it seems that it is not working.
    Could you suggest some other way to do this?
    Thanks and regards.
    Abhisek.

  • Existing cross Reference: how to change the name of the file it refers to?

    Hi everybody,
    I am a professional translator.
    One client of mine sent me a complete FrameMaker 9 book file for translation.
    I translated the content via a CAT-Tool and now am in the process of checking if cross references and markers are ok directly into the file.
    I noticed that many cross references are linked to another file of the book. But in the process of translating each file separately, I gave them a slightly different name (I added the language at the end) so as to be able to recognise them eventually.
    Now I have this problem: I cannot find in the cross reference interface where to change the name of the file into the new one the cross reference is supposed to refer to.
    Am I right in wanting to change the file reference? If so, how do I do that?
    Or is it better to avoid this task and rename the translated file into their original names ? Would it work then?
    Thanks for your help.

    ... book file ...
    ...  each file separately, I gave  them a slightly different name (I added the language at the end) ...
    I'm guessing that you renamed the component files by means other than using the Edit > Rename File from the Book menu.
    If so, do over. Rename from the Book menu. It automatically revises all the cross-references in all the component files.
    In a Book, the only thing that's safe to rename with the file manager is the .book file itself.

  • I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. After long hours, I discovered that if I change the name of the mailbox, the content works.

    I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
    After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
    Please, make this solution available to other people!

    You have found the the way to share it.   Include your problem and its solution in a forum post in the Mavericks forums.   Then mark you own post with a green solved star.
    Note.  You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved.

  • Change the name of window in SAP B1 8.8

    Dear All,
    I want to change the name of the A/R Down Payment request window to some other name. I have tried to do the same from frontend from document numbering but the problem is since there are no separate series for Down Payment request & invoice when I change the name there only the down payment invoice name changes while down payment request remains the same. Please guide if there is any table in SAP where all the window names might be saved and where I can go and edit the  name without any repercussions.

    Hi,
    Gordon is right you will get more replies if it's flagged as a question as people can earn points.
    But I'm feeling generous :P
    I don't know a way to do it like you mentioned, but you can just use the UI. There's loads of ways to do it but you could catch the form load event on before action = true, and do
    If (oForm.Title == "A/R Down Payment request")
               oForm.Title = "My new title";
    If you haven't worked with UI there's loads of examples and info to cover the bits I glossed over.
    Good luck

  • For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

    For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
    SOLUTION:
    Iam pointing t0 windows7 os.
    1) go to control panel
    2) open hardware and sound
    3) In that open Devices and printers
    4)In that u can find Apple Iphone.
    5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
    6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • Trying to change the name of 1 file

    I have searched the topic and have not found a solution that works for me,
    I am trying to write an AppleScript that will change the name of a single file from path:old.txt to path:new.txt
    I have tried
    tell application "Finder"
    set name of file "work.txt" to PartA & PartG & ticker & ".txt"
    end tell
    among others and always either receive an error message, access denied or unable to set old file name to new file name

    You're missing the point.
    set name of file "work.txt" to PartA & PartG & ticker & ".txt"
    When you set the name of the file, the Finder needs two things - the original file that you're trying to rename, and the new name you want it to take.
    In your revised script you're specifying the existing name (not path) of the file you want to change, and specifying its path along with the new name. That's the wrong way around.
    Think of this command in the following manner:
    set name of (original file specification) to (new file name)
    Now, in the case of the 'original file specification' you need to provide enough information for the Finder to identify the file. You're just saying 'work.txt', but that is not enough (and that's why it's complaining). There could be a hundred 'work.txt' files spread around in different directories on your disk. How is the Finder supposed to know which one you want to change?
    A better format would be:
    tell application "Finder"
      set name of (file "work.txt" of path to desktop) to "ABC.txt"
    end tell
    In this way the Finder can absolutely identify which file you want to change (the file 'work.txt' that's on your desktop) and the new name you want it to take.
    Now, if the file is not on your desktop you can amend the script to include the relevant path, e.g.:
    tell application "Finder"
      set name of (file "work.txt" of folder "blah" of disk "disk name") to "ABC.txt"
    end tell
    This tells the Finder to look in the folder 'blah' on the specified disk.
    You can also do this by including the path to the file in the form:
    tell application "Finder"
      set name of (file "disk name:blah:work.txt) to "ABC.txt"
    end tell
    where you use : to delimit each folder in the path.
    Hope that helps.

  • HT4137 I plugged our phone into our mac to charge it and it changed the name of the phone to my wife's phone.  Attempt to backup from I cloud only gives backups since the name change. How do I reclaim my phone's name?

    I plugged my i phone into our mac just to recharge it and somehow it recognized it as my wife's phone and changed the name of the phone to hers.  I lost the carrier I was using, though it still can connect to internet.  I tried to erase all settings and content, and then back up from I cloud, but it only offered backups since the name was changed.  I can't make any calls at this point.

    Just plugging it in doesn't change the name. If this was the first time you connected to this computer, you should have selected "Set up as New Device".
    You will need to restore and since you no longer have a backup for this phone, you will lose your data.
    Restore iOS

  • Change the name from Portal Favorites to Portal Favourites

    Hi,
    There is a requirement that where ever in Portal, the name of Portal Favorites should be changed to Portal Favourites.
    So when I add something to Portal Favorites in Portal, then there we get Organize Entries in the context menu and opening this it will open a pop-up having name as Favorites.
    I searched and come to know that this is coming from a folder under KM Content /userhome/<portal-userid>/Favorites.
    If I changes the name Favorites to Favourites then it reflects to that corresponding id, but changing from here for every portal-userid will be very difficult.
    Can someone tell how we can change on global basis for every portal user.
    Regards,
    Deep Nain Kundra

    Hi there,
    The iView called "Favorites" in Content Provided by SAP > End User Content > Standard Portal Users > iViews > com.sap.km.iviews points to a KM folder which you can find in Content Administration > KM Content > root > Entry Points > Favorites. You can change the name of this folder: with Entry Points > Favorites selected choose Folder > Details and then Settings > Properties, set the name to whatever you like and click Save.
    Now this isn't 100% effective but if a user accesses the Organize Entries command from the Favorites context menu, they will now see your custom folder name. A preview of the iView will show the same.
    What this doesn't do is change the name of the Entry Point, so a user looking under Documents will still see the heading "Favorites". According to SAP Help this can be changed by creating a custom bundle file, but despite following the steps detailed in [Changing Labels and Symbols for Entry Points|http://help.sap.com/saphelp_nw70/helpdata/en/36/8b6b4066d9bf49e10000000a1550b0/content.htm] I have not had success with this.
    Tom

  • I am trying to change the name in my "from" box

    I am trying to change the name in my "from" box. My name has changed and although I have changed the name on the account, I can't figure out how to make the default name in my "from" box change from my previous name to my new name.

    You may need to know that (in Snow Leopard at least) you specify multiple possible "From" email addresses as a list separated by commas.  Just type them into that little Email Address box*: they'll move over to make room.  Then, on your new messages from that point on, a pop-up menu will appear for the From field.  Neat, eh?
    *-- Notice that you can lie in this box.  Your ISP might not let you get away with it, but spammers use this loophole.
    --Gil

  • Change the existing Reports to point to a renamed Universe

    Hi All,
    I have a universe named X1 and today I wish to change the name of the universe to X2.
    I have around 150 reports pointing to the universe X1.Is there a way to change the all the DeskI reports to universe to X2 at one go.
    I know that In deski we can go to the data manager >definitions> universe and then select the universe in the list.
    The version I am using is Business Objects XI R2 and all the reports are DeskI reports.
    Do we have any solution instead of going and changing it individually?
    Regards
    Prashant

    Hi.
    Maybe other option could be importing the universe using universe designer, in universe params change the name and export to CMC in the same path .
    The system should ask you about if you want update the universe, changing the name in all the reports.
    Please, try before with one test universe because i'm not sure....
    Good luck!

  • How do I change the name in Terminal

    When I try to access Terminal, and enter a sudo command, it asks for my password.  It has the name wrong of my computer, and then won't accept my password.  I can hit enter 3 times and it brings right back to my starting point.  How do I change the name of my computer and allow it to accept my password?

    First, make sure caps lock is not on.
    Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive.
    Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • Change the name of the universes in several reports

    Hi,
    We have thousands of DESKI reports which are pointed towards erroneous universes.
    I must make following tasks:
    1- to change the name of each report.
    2- In each report, to check out if there is only one or several data providers.
    3- For each data providers given to modify the universe towards which it is pointed.
    The manual solution is very long to make, I seek a solution to automate these tasks to make more quickly so that the users are not very penalized.
    Thank you for your help

    Hi Paul,
    You may want to resubmit your question to the "Business Intelligence (including SAP BusinessObjects and SAP Crystal Solutions)" section of the forum.  This particular forum is more for data integration and quality using the Data Services product.
    You can find that BI-related forum from the root SAP Community Network Forums.
    Chuck

Maybe you are looking for