Changing the name of the podcast

Hello
Our podcast has been recently approved for itunes, which makes us very happy
however, we have noticed that the name of the podcast had an error.
Instead of "JustQualityMusic Podcast" we have "JustQuality Music Podcast"
We have already updated the xml file and did the ping.
Will the information automatically change after we do another ping or do we need to contact itunes support?

It should change once iTunes gets round to reading the xml file - this might take a day or two - or possibly when you add an episode. It's showing correctly already for subscribers (who of course go directly to the feed).

Similar Messages

Is it possible to change the name of my podcast?

I want to change the name of my podcast. Is it possible? Please help.

This depends on the situation. If you were hand-writing the feed (which I assume you aren't) you could just change the 'title' tag. Some podcast creation programs or online service will let you change the podcast name, and doing that and re-publishing will get your name change onto the Store after a couple of days.
However, some programs or services create the feed with a file name which is drawn from the title. If you change the name you will change the feed URL and then iTunes won't know where to look for it and your podcast will cease to update.
So you need to take that into consideration before changing the title.

How do I change the name of a podcast once submitted to itunes??

how do I change the name of a podcast once submitted to itunes??
anyone know? I submitted my first podcast, then changed the name in feedburner. The new name is appearing once you are in the podcast window of my itunes, but not in the itunes store catalog. how do I fix?

Here's what iTunes Podcaster help says:
http://www.apple.com/itunes/store/podcaststechspecs.html
Troubleshooting Your Feed
iTunes should update your listing at least once every 24 hours. If you made changes more than 24 hours ago that are not yet reflected in your iTunes listing, there is a good chance that your feed has broken. When iTunes encounters a broken feed, it ignores the feed and continues to display the old data.
Here is a set of recommended steps to fix your feed:
Ping your feed to make sure iTunes has attempted to update your feed recently.
Review the technical spec, particularly the example feed, to ensure that every detail of your podcast’s feed is supported by iTunes.
Use a feed validation service like www.feedvalidator.org to check for particular problems. This may be helpful in determining a specific problem with syntax.
If you used a software- or online-based feed creation service, check to ensure your settings there are correct and iTunes-compliant.
Subscribe to the feed in iTunes to see if it works. Open iTunes, go to the Advanced menu, choose "Subscribe to podcast..." and enter your feed’s URL.
Hope this helps - Podcaster's discussion board might have more answers:
http://discussions.apple.com/forum.jspa?forumID=1107

Can I Change the Name of My Podcast?

Can I change the name of my podcast without losing subscribers, likes, and library of interviews?

You can change the name provided that the method you are using isn't one of those which includes the title in the URL, and so would change the URL. If you do that iTunes will lose contact with the feed. To get round that you would have to leave the old feed in place, adding the 'itunes:new-feed-url' tag to redirect to the new version as described here:
http://wilmut.uk/move

Hi i have made a podcast but i didnt put the name of the channle in caps how do i change it

hi i have made a podcast but i didnt put the name of the channle in caps how do i change it

Change it wherever it was you entered it in the first place and re-publish. It will probably take the Store a couple of days to pick up the change: it's possible it may not do so until you publish a new episode.

Why do my video podcasts now save in a folder under the file name "download" and not the name of the podcast

I just downloaded Itunes 10. When I download video podcast they save in a individual folder with the podcasts name.tmp, then inside the folder is the video file just named DOWNLOAD. This didnt happen in the previous versions of itunes why is this happening in Itunes 10? How can I change so that the files save as the name of the podcast.

Some users seem to be having issues with the latest build (10.2.2) where files are not moved/renamed after downloading. It works fine for me in a test library so I'm not quite sure what the issue is. You may find things sor themselves out if you turn off Keep iTunes Media folder organised and then turn it back agaqin (assuming you use that feature). Hopefully the next update isn't too far away.
Alternatively you can try my script ConsolidateByMoving which should move selected files that are in the "wrong" place to their standard iTunes locations.
tt2

How can i delete my music from itunes it dont let me also how to change the name of the ipod shuffle it dont let me

i need help please help me on itunes i try to change my name for the ipod shuffle and it dont let me it dont do anything also when i try to delete the music on it it dont show me if i want to delete or not the font is just gray and dont show any opitions also when i go on my iphone it lets me do all the stuff that it dont let me do i connect my iphone and it lets me delete music and change the name but the shuffle doesnt

What happens when you try to change the Shuffle's name from under the Devices section in the left hand pane of iTunes?
Is your iPod set up to manually manage its contents. For more information, see your iPod's User Guide.
http://support.apple.com/manuals/#ipodshuffle
B-rock

How do i change my name on airdrop for the iPhone? It shows up as the name on the account not the iPhone owner (which is me)

I would really like to change my airdrop name but i have no idea how

Our iPad wasn't showing the name of the person signed in to Find My Friends under ME. It was showing someone else. We deleted that person's contact from Contacts. Removed Find My Friends. Rebooted iPad. Reinstalled Find My Friends. Now it says My Location. Better. Added the contact back in - still working fine.

How can I change the name of the HD and Home Folder?

Recently, I had a problem with my computer in which a prohibition sign came up instead of apple logo at start up. I took it to an Apple Store, and they told me that the mistake was in the HD, that they needed to restart the system, so I told them OK, but then it turned out that it wasn't that, it was the cable which connected the HD to the motherboard which was damaged.
They obviously put the name of the HD to another one, and the home folder as well.
So my HD name is "Apple HD" and I want to change it to "Macintosh HD".
My home folder is named "eduardo" and I want to change it to "Eduardo".
I am currently running on OSX 10.9 (Mavericks)
My MBP is a mid 2012, model 9,2.
Thanks! Hope u can help me!

Open the Terminal in the Utilities folder and paste the following at the prompt:
sudo diskutil rename / "Macintosh HD"
Press RETURN. Enter your admin password as prompted. It will not echo to the screen. Press RETURN again.
Diskutil is a disk utility.
Rename is a command.
/ is your main drive.
Note that there is a space before the slash mark and after it.

How can I change the name of the administrator that shows on Home Icon?

Hello
I've bought this laptop from a reliable source, went to the Apple Store (Regent St) with the box and they registered it in my name, address and so on. No problems, the mac works fine.
However, the Home/Icon and administrator is in the name of the old owner. Obviously, he gave me the password. But, I really want to have my name on it.
I've the box, the discs and all the books. Everything is in really good conditions.
I read the manuals, the instructions are straight forward but on the net and forum related mac, I can see that are lots of people having problems when they reboot and are unable to login and so on...
The genius bar at the Apple Store is okay, but the staff main objective is to sell and they are not very patient and neither have much time for you. Normally I end up leaving the store with software that I don't have a clue how to use and the problem unsolved. And it stresses me out.
Can someone help me please.
Thank you
Best regards

1. Yes, just the Shortname will be changed.
2. Not easier, but you can do that if you wish.
since I'm in the official Mac support forum should I expect to receive a reply from a Mac expert staff or it is unlikely to happen?
Just other Users here like you, trying to help other users. For a real Apple answer I think you have to call AppleCare, but rarely an Apple Host pops in... wouldn't expect it in this case though.
I do thank you for the info about your software and obviously will make a donation if everything works fine.
Not mine, but a worhy piece of SW just the same.

Existing cross Reference: how to change the name of the file it refers to?

Hi everybody,
I am a professional translator.
One client of mine sent me a complete FrameMaker 9 book file for translation.
I translated the content via a CAT-Tool and now am in the process of checking if cross references and markers are ok directly into the file.
I noticed that many cross references are linked to another file of the book. But in the process of translating each file separately, I gave them a slightly different name (I added the language at the end) so as to be able to recognise them eventually.
Now I have this problem: I cannot find in the cross reference interface where to change the name of the file into the new one the cross reference is supposed to refer to.
Am I right in wanting to change the file reference? If so, how do I do that?
Or is it better to avoid this task and rename the translated file into their original names ? Would it work then?
Thanks for your help.

... book file ...
... each file separately, I gave them a slightly different name (I added the language at the end) ...
I'm guessing that you renamed the component files by means other than using the Edit > Rename File from the Book menu.
If so, do over. Rename from the Book menu. It automatically revises all the cross-references in all the component files.
In a Book, the only thing that's safe to rename with the file manager is the .book file itself.

How to change the name of the Mac I connect to in the drop-down window.

Using my brand new MacBook, in the drop down menu when I connect to my iMac, it shows up as my name ( which is Derek Walton's Computer) ...... How can I change the name that shows up here? I have tried all areas that iI can think of and altered my name on the iMac but to no avail - e.g. - Network Sharing, Account Name, and so on.... anything anywhere I have changed... but it always shows up with my full name. I have however managed to get the name in the sidebar of the Leopard window to read as I want ( Derek's iMac) but that is all.
Also, when I am using Airport on my MacBook, in the drop-down menu I see also other neighbours connections.... I am wondering therefore does it follow that they can see my wireless connection ( as Derel Waltons Computer)?
This has been vexing me all night and I am geting very frustrated, but I bet there is a simple answer..... for those that know!
Thanks in advance for any help you care to put my way.
Derek

It is not a simple issue. Not the same as changing a user account in Preferences. Ttry this link:
http://docs.info.apple.com/article.html?artnum=106824

I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. After long hours, I discovered that if I change the name of the mailbox, the content works.

I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
Please, make this solution available to other people!

You have found the the way to share it. Include your problem and its solution in a forum post in the Mavericks forums. Then mark you own post with a green solved star.
Note. You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved.

How does one change the name of the home folder?

I would like to change the name of the administrator and home folder on one of my computers. How is this accomplished?
I'd be most grateful for some help with this.
Thanks.

Macworld | Changing the short username in Leopard. Use the last procedure, "The Full Monty."

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Changing the name of the podcast

Similar Messages

Maybe you are looking for