Changing the No of packages when we delete the Empty HUs  in Delivery

Hi,
My requirement is to delete the empty handling units in the delivery. And at the same time, I need to update the no of packages as soon as we delete the empty handling units in delivery. I can delete the Empty handling units but the no. of packages are not updating in the delivery. Kindly suggest me any suitable BADI/BAPI or user exit for this problem.
Thanks in advance.
Regards
Ramesh.

these assignments can only be deleted logically in the corresponding transactions for processing the routings.For the user, they are no longer displayed, but they still exist in the database.The material master can only be changed after the routing has been reorganized.
please read OSS Note 60386 - Deleting the material allocation to routings
it has an alternative  solution  to archiving

Similar Messages

  • Change the profit center in delivery wise

    Dear All ;
    In my case i use cross company code (C001 , K001) so i do PO in C001 and when i try to make a delivery in K001 i didn't get the profit center, the profit center field is Blank so i need to change the profit center in delivery.
    Please Help
    Mohamed Helmy
    +20 222 0 386

    Hello Mohamed,
    As I know all changes of the profit center should be done in the sales order only.
    This is because there would be no update of the sales order afterwards
    (the result would be: different profit center in a document chain)!
    Although the profit center could not be changed in the sales order, if the sales order has the follow documents already (due the same reason as above). But there is a modification note 580216 which provides a workaround. I hope this information helps you.
    Best regards,
    Lela

  • Change the profit center in delivery

    Dear All ;
    In my case i use cross company code (C001 , K001) so i do PO in C001 and when i try to make a delivery in K001 i didn't get the profit center, the profit center field is Blank so i need to change the profit center in delivery.
    Please Help
    Mohamed Helmy
    +20 222 0 386

    Hello Mohamed,
    As I know all changes of the profit center should be done in the sales order only.
    This is because there would be no update of the sales order afterwards
    (the result would be: different profit center in a document chain)!
    Although the profit center could not be changed in the sales order, if the sales order has the follow documents already (due the same reason as above). But there is a modification note 580216 which provides a workaround. I hope this information helps you.
    Best regards,
    Lela

  • Sales Order - Returns change the sales order item delivery status

    Hi All,
    we have the following requirement from our users:
    after creating a return, the original sales order should have the
    delivery item status changed.The system should permit that a new
    delivery can be created for sales order item already delivered / billed (a new delivery with the quantity that has being returned) but has a return document,
    without increasing the sales order quantity.
    Does any body got the same requirement ?
    Thanks in advance,
    Marcus

    Hi Marcus,
      After creating return order you have to do the goods receipts.But this doesn't mean that you will be able to create a delivery with the old order itself.
      You have to create the order again and ahve to create a new delivery,goods issue and billing.
      Another option is as Roberto said that you have to reverse the goods issue thru VL09 and then cancel(delete) your delivery and then you can create a new delivery wr.t to your original sales order.
      Reward points if it helps.
    Regards
    Karan

  • Change the sequence of planned delivery costs in MIRO

    Dear Experts,
    In import an import PO the various CVD & ACD conditions are maintained in the PO .
    To enter the bill of entry , MIRO is used where the invoice is booked for planned delivery costs for the PO .
    In MIRO , this planned delivery costs appear by default in certain sequence. I want to change this sequence .
    eg by default the system shows :
    Sec Ed cess on CVD
    ACD
    BCD
    Ed cess on BCD
    CVD
    Ed cess on CVD
    Sec Ed Cess on BCD
    I want to change the seq of appearance in MIRO.
    How is it possible
    Pls guide
    Regards
    Anis

    Dear Anis bazmi
    You will get the conditions as you desire one below another  in PO or MIRO if you have defined them exctly the same way in your calculation schema steps, other wise there is no way in getting the way you want and it can not be changed either in PO stage or in MIRO also.
    Just check, when you are processing MIRO, please select Planned delivery Costs form the menu below instead of the combination of  both.
    Regards

  • Change the SMTP 550 non delivery message

    Hi,
    I want to change the texte of the non delivery report (SMTP code 550)  send by the email appliance. 
    What is the simple way to do that ?
    Moreover, i would like to know how long the applicance will keep the message in queue in case of my internal email server will be out of order ?
    Where can i see/change this setting ?
    Thanks.

    You can set the 550 from the appliance, Mail Policies > Mail Flow Policies > Choose Policy Name.  From there, see the DHAP section:
    To answer the second part of your question...
    By default, mail is queued for 72 hours (259200 seconds) OR 100 retry attempts before it bounces to the original sender. 
    This setting is configurable from the command line (CLI): type bounceconfig and edit the default settings.  Also, you can modify this from the GUI interface by going to "Network > Bounce Profiles" and click on the Default profile.
    Also, the queue could fill up if there is too much mail. However, if the system reaches its storage limit, it will soft bounce further attempts by other mail servers to deliver more messages. This ensures that no messages will get lost, as these mail servers will reattempt message delivery as well until the ESA accepts messages again.
    Note: If you plan to shut down your internal mail server for maintenance for a longer period (more than a couple hours), best practice is to suspend the incoming listeners on your ESA as well (suspendlisteners). As mentioned before, in this case any connection attempts will be soft bounced, and retried later. This way, you leave the task of storing the messages to the sending mail server, which will prevent the mail queue on your email appliances filling up quickly. No messages will be lost however, once you got your internal mail server back into service, also resume the listeners on your ESA (resume), to allow delivery from remote hosts again.
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Tempo changes - can't move them when I delete bars or beats

    I have written in many tempo changes in a project, both immediate changes and drawn curves to create rallentandos. I then decide to eliminate a few bars, say, in the middle of the piece, then shift all the regions together where the deleted bars have left a gap.
    When I move the regions, the tempo automation does not move.
    How can I move tempo changes to match the bars I've just deleted?

    I have not done this for a while, but I think you need to hit "select all" in the arrange window and then use the cut/insert time command in the track menu to do your cutting. That should move everything appropriately.

  • Can i change the location of my delivery on my ipod touch

    please help me

    Pretty sure they will send it back to the address where it was sent from. I could be wrong.

  • My hard drive is full even when I delete big files?

    I got a notification telling me my hard drive was full. I had been downloading a lot lately so I knew it was going to happen. I then went through and deleted 34GB that I had in one of my folders. But even when I deleted and emptyed my trash my hard drive says it's still full. I showed hidden files but there aren't enough of those to be causing the issue. 
    I'm planning on getting an external hard drive to free up another 68BG or more of space but until I do I need to know why the 34GB that I deleted didnt free up space.

    What version of the Mac OS is running on your MacBook?

  • How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

    Hi !
    I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
    Can anyone tell me how to pass/change the storage location of each batch item.
    Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
    Regards,
    Firoz.

    Hi all,
    BAPI_OUTB_DELIVERY_CHANGE  can be used to do batch split and updating storage loaction against each item of an outbond delivey.
    I have done that in the folllowing way:
    1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
       Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control  and item_data_spl parameters and passed into intenal table li_lips.
    Loop at li_lips inti lw_lips.
        lw_item_data-deliv_numb           = lw_lips-vbeln.
        lw_item_data-deliv_item             = lw_lips-posnr.
        lw_item_data-material                = lw_lips-matnr.
        lw_item_data-fact_unit_nom      = lw_lips-umvkz.
        lw_item_data-fact_unit_denom  = lw_lips-umvkn.
        lw_item_data-base_uom            = lw_lips-meins.
        lw_item_data-sales_unit            = lw_lips-vrkme.
        lw_item_control-deliv_numb      = lw_lips-vbeln.
        lw_item_control-deliv_item        = lw_lips-posnr.
        lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
        lw_item_data_spl-deliv_item     = lw_lips-posnr.
        lw_item_data_spl-pick_denial   = 'X'.
        lw_item_data_spl-stge_loc       = v_lgort.
    "(This would be your Storage Location which you want to be updated)
    Appending work areas into internal table to pass as parameter
        APPEND lw_item_data_lgort     TO li_item_data_lgort .
    Appending work areas into internal table to pass as parameter
        APPEND lw_item_control_lgort  TO li_item_control_lgort.
    Appending work areas into internal table to pass as parameter
        APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
    endloop.
    Passing the delivery no in the work area of header data
      lw_header_data-deliv_numb           = v_delivery_no.
      lw_header_control-deliv_numb       = v_delivery_no.
      lw_header_tech_control-upd_ind   = 'U'.
    Calling BAPI to change the Storage location
      CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
        EXPORTING
          header_data       = lw_header_data
          header_control   = lw_header_control
          delivery               = v_delivery_no
          techn_control     = lw_header_tech_control
        TABLES
          item_data           = li_item_data
          item_control       = li_item_control
          return                 = li_return_change
          item_data_spl    = li_item_data_spl.
    Calling BAPI to committ the task
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
    2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
    Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
    Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
    Looping through Internal table to get Bin details
      LOOP AT i_lqua INTO w_lqua .
    Clearing work area before use
        CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
    Reading table comparing metrial number
        READ TABLE li_lips INTO lw_lips
        WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
    If read is successful, passing values from table
        IF sy-subrc EQ 0.
    Passing the delivery details into Item level table
          lw_item_data-deliv_numb              = lw_lips-vbeln.
          lw_item_data-deliv_item                = lw_lips-posnr.
          lw_item_data-material                   = lw_lips-matnr.
          lw_item_data-batch                       = w_lqua-charg.
          lw_item_data-dlv_qty                    = w_lqua-verme.
          lw_item_data-dlv_qty_imunit         = w_lqua-verme.
          lw_item_data-base_uom               = w_lqua-meins.
          lw_item_data-hieraritem                = lw_lips-posnr.
          lw_item_data-usehieritm                = 1.
          lw_item_data-fact_unit_nom          = lw_lips-umvkz.
          lw_item_data-fact_unit_denom      = lw_lips-umvkn.
          lw_item_data-sales_unit                 = lw_lips-vrkme.
          lw_item_control-deliv_numb           = lw_lips-vbeln.
          lw_item_control-deliv_item             = lw_lips-posnr.
          lw_item_control-chg_delqty           = 'X'.
          lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
          lw_item_data_spl-deliv_item          = lw_lips-posnr.
          lw_item_data_spl-stge_loc            = w_lqua-lgort.
          lw_item_data_spl-pick_denial        = 'X'
    Appending work area into internal table to pass as parameter
          APPEND  lw_item_data TO  li_item_data.
    Appending work area into internal table to pass as parameter
          APPEND lw_item_control TO li_item_control.
    Appending work area into internal table to pass as parameter
          APPEND lw_item_data_spl TO li_item_data_spl.
    Clearing work areas after use
          CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                        lw_vbpok, lw_lips.
        ENDIF.
      ENDLOOP.
    Passing the delivery no in the work area of header data
      lw_header_data-deliv_numb           = v_delivery_no.
      lw_header_control-deliv_numb       = v_delivery_no.
      lw_header_tech_control-upd_ind   = 'U'.
    Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
      CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
        EXPORTING
          header_data           = lw_header_data
          header_control       = lw_header_control
          delivery                   = v_delivery_no
          techn_control         = lw_header_tech_control
        TABLES
          item_data                = li_item_data
          item_control            = li_item_control
          return                     = li_return_change
          item_data_spl         = li_item_data_spl.
    Calling BAPI to committ the task
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
    This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
    I hope this code will help you.

  • Changing the trashcan icons

    is it possible to change the empty and full trash can icon? i already tried the (CMD+I, CMD+C, CMD+V) with no success. is there an alternative or can it not be changed? thanks!

    I think you need a special utility to do that. Check out [Candybar|http://www.panic.com/candybar>.

  • How can I retrieve emails that were deleted off my iPhone 4s when I changed the password to my email acccount?

    I changed the password to my email account and when I changed it in my phone all of my emails were deleted Is there any way to retrieve them? They are in the server and I can access them via Outlook just not on my iPhone or iPad.

    They won't be in icloud, since the only thing that would contain pictures are backups.  But they were deleted before you signed up for icloud, so forget that.  The only other thing to check is you computer.  Users are always advised to sync photos to computers for archiving.  If you did that, you should be able to find them there.  But without any backups or copies of them, then they are history.
    And no, you can't look at pictures in icloud.

  • When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. How can I resolve this?

    Question
    When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can I change the settings so when I delete an email from my iPhone it will also delete from my iPad.....very sick of deleting the same emails two times

    How can I change the settings wit mail so that when I delete my Verizon email from my iPhone it will also delete from my iPad too.... Seems like I shouldn't have to delete my email in three places...iPhone ..iPad ...and desktop

    Don't know which email host you are using, but if this is a POP account, you can't do it. If IMAP, then deleting one email should delete it on all other devices.

  • HT5621 I changed my Apple ID but on my iPhone when I go into settings iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!

    I changed my Apple ID but on my iPhone 4S w/ iOS 7.0.4, when I go into settings > iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!

    http://support.apple.com/kb/TS5223?viewlocale=en_US
    Peace, Clyde

Maybe you are looking for