Changing the page order setting

Since installing snow leopard, I can't figure out how to change my HP printer settings so that my pages are printed in 'order', meaning the first page of a document prints last so I don't have to arrange myself.
What am I doing wrong?

When you select to print, if you change the print dialog menu to Paper Handling, there is a Page Order menu. The values are Automatic, Normal and Reverse. I have found that Automatic works fine for me, but you may need to change to one of the other items to correct your print output.
You may also need to check the configuration of the printer if it has one. Some printers can set their print order, independent of the print driver.
Pahu

Similar Messages

How to change the page order in Microsoft word 2008

Hi, can you tell me how to change the page order in Microsoft word 2008, thanks

http://answers.microsoft.com/en-us/mac

How do I change the page order in Numbers

I have a simple three page document/ In the top left it says "sheet 1, 3 pages". I want to change the order of page I and 2. Simple, one would think, but I cannot figure out how to do it without a tricky cut/paste operation. Surely one would think you could see the pages in the left column and just drag and drop them to re-order?
Anyone help me - perhaps I am overlooking something that is supposedly intuitive. Or maybe this part of the software was written by the page break department?
Thanks

Richard,
The answer depends on whether on not you have a table that spans two or more pages. I'm guessing not.
In Print View, do a click-drag to select all the content on page 1. Click on any part of the selection and drag the entire page 1 content to a blank page - one of the dimmed-out ones. Similarly, select and move the content of page 2 to page 1. Retrieve the former page 1 and drag it to page 2.
It's very manual and very WYSIWYG.
Jerry

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do I change the page set up from manual to roll, cannon ipf6400 says paper tray empty it uses roll paper.

Nee help ASAP my IPF6400 printer is telling the paper tray is empty, it uses roll paper. I tried to change the page setup from manual to roll and its no letting me.

Hi, Chaz. I'm not sure what your Print dialog box looks like (it's created by your printer driver, and I use different printers from yours). But the paper size used by my printer is set in the Page Setup dialog box (also created by the printer driver), not in the Print dialog. Try setting your desired paper size in Page Setup and see whether it then stays selected in the Print box.
I don't know of any way to edit the list of paper sizes offered by your printer driver. Contact the printer manufacturer's tech support for advice on that, but don't be too surprised if they can't help you.

Has the page ordering changed since cs5 or is something amiss with my cs6?

Hi
Right i hope i explain this correctly
in my old cs5 the page ordering displayed like so in the pages panel:
1
2-3
4-5
6-7
and so on
but in cs6 its like this
1
3-2
5-4
7-6
and so on
so basically all documents when exported are in the wron order!!!
is this new and correct or is something wron here? sure seems that way. can anyone help me fix this annoying issue?
many thanks and happy holidays
Dean

Got it "binding options" thanks for your help

How can I change the page size of a scanned PDF document?

How can I change the page size of a scanned PDF document?
I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
I'm using Preview Version 4.2.

Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

Did anyone find a good way to sort the shared albums better, so that the ones you share with can better find their way around.
You can arrange them manually in an album, select all and use the Photos ➙ Batch Change ➙ Date to menu option and check the box to add a set interval between photos. That will let the photos be sorted by date and be in the order you want:
OT

HT2470 Why does this not explain how to change the sort order?

Why does this (i.e. support at Apple.com) not explain how to change the sort order? I can "arrange" by Date Modified for example but it won't let me switch to use most recent dates first. Also, what is Apple-speak for arrange versus sort anyway? It seems I used to be able to click on a column heading in finder and get a drop down arrow allowing me to change the sort sequence.

Arrange roughly translates to "group the items in the folder." Sort is how each group is ordered. If you have arrange set to none, you can sort by anything. However, there is no way in the Arrange/Sort menu to choose the direction. The only way to do that is in the List View, and you must have Arrangement set to None.
I've submitted an Enhancement Request to allow choosing sort direction from the Arrange/Sort menu, but I haven't ever gotten a response, which is good and bad. Good because they will often respond that they have considered it and don't plan on implementing. Bad in that they've haven't implemented it.

How do I get Photoshop to stop changing the page when I zoom in or out?

I was wondering how to stop my screen in photoshop to not change the page when I zoom in or out. When I zoom in the page adjust and make the panel smaller. I would like to leave the screen ful size and just the image zoom in and out

Argh! Don't you just hate that! I don't know why Adobe set that as default behavior. To stop it go to Photoshop Preferences > General and uncheck "Zoom Resizes Window"
You can also hit the F key once to enter Full Screen Mode.

How do you change the movie order in iDVD?

I'm doing a video showreel and need to change the running order of movies that I'm using. My menu page lists the 4 movies in a vertical list, which is fine, except I'd like to move the last one up the running order in the menu.
I assumed you'd drag it, but that doesn't work. Can anyone help?

You can drag the sub-item (movies) back into the parent item and it will place the item you dragged into it at the "end" (on the right looking at it in the top-down tree view.) You cannot put the first item on the end, but you can get around this by putting it into a child node and then back into the parent node.
Hope this makes sense...

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Change the sort order (ascending/descending) based on parameter field

I have created a formula on a subreport to change sorting based on variables.
select {?Pm-@Sorting}
case "property_type_desc ASC" :
{owned_property.property_type_desc}
case "property_type_desc DESC" :
{owned_property.property_type_desc}
default:
({owned_property.property_type_cd}; )
how can I change the sort order ascending and descending using the formula??
Thanks, Jessica

Try this
1. Create a parameter with 2 default values in the picklist: Descending and Ascending.
NOTE:
In Crystal Reports version 5 or 6, it is not possible to have a pick a parameter value from a list. The user must enter a specific value, guided by the prompting text. For example : To Sort in Ascending order type A, to sort in Descending order type D.
u2022 On the 'Insert' menu, click 'Parameter', then click 'New'.
u2022 Type the name and prompting text for the parameter in the corresponding boxes.
u2022 In the 'Type' box, click 'String'.
u2022 Click 'Set Default'.
u2022 In the 'Value to add' box, type 'Descending' then click '>' to move it to the 'Default Values' list.
u2022 Repeat the above step for 'Ascending'.
u2022 Click 'OK', then click 'OK' again to return to the report.
2. Create 2 formulas based on the field you want to change the sort direction on:
u2022 On the 'Insert' menu, click 'Formula', then click 'New'.
u2022 Create this formula:
@Asc
If {?Parameter} = "Ascending" then
u2022 Save this formula and close the Formula Editor. This brings you back to the Formula tab of the Insert Fields dialog box.
u2022 Click 'New' and create this formula:
@Des
If {?Parameter} = "Descending" then
u2022 Save this formula and close the Formula Editor.
u2022 Click 'Close' to return to the report.
4. Sort the report based on these two formulas.
u2022 On the 'Report' menu, click 'Sort Records'.
u2022 In the 'Report Fields' list, click {@Asc} and move it to the 'Sort Fields' list.
u2022 Under 'Sort Direction', click 'Ascending'.
u2022 In the 'Report Fields' list, click {@Des} and move it to the 'Sort Fields' list.
u2022 Under 'Sort Direction', click 'Descending'.
u2022 Click 'OK' to return to the report.
Once you preview the report you will be prompted to select a parameter value, which will determine how the report is sorted.
Regards,
Raghavendra

Printing issues i'm not able to change the print order it always prints back to front.

I have an HP Pavilion model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!!

I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
How to reproduce:
1) Exit LabVIEW completely (VERY IMPORTANT)
2) Open and run the attached VI
3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
4) press on the print button
5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
Changing the value with the arrows is possible.
6) stop the VI.
7) restart and no problem will occure.
8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
Attachments:
PRINTfp.vi ‏28 KB

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

Changing the page order setting

Similar Messages

Maybe you are looking for