Changing the pdf profile of batch create multiple files in Acrobat?

Is it possible to load another pdf profile for batch create multiple files from Acrobat? I am batching indesign pages and I need to use a high resolution pdf profile with printer marks
The default seems to be low res rgb. Any idea if this can be done?

it is a custom Pdf Profile but basically an X1a with a few tweeks, When I try a watch folder with distiller it just errors out all the files.
Batch Processing using the "Create PDF, Batch Create Multiple Files " in Acrobat works but does not let me choose a pdf profile.
C

Similar Messages

  • Batch create Multiple files in Acrobat X and X1 cannot convert Word 2010 with graphics

    I work for an exams board where hundreds of exam papers are produced. Once approved, these exams are converted to PDF and sent to print.  Using the Batch Create Multiple Files option is therefore essential to getting these papers print ready on time.  We have found that using this function to convert multiple Word 2010 files with graphics will not render it properly.  It deconstructs the graphics which loses the integrity of the exam paper. 
    I have trialled the same group of files on Acrobat X1 with the same result.
    Have other Acrobat Pro Users experienced the same problem?  Is there a fix? 

    I have uploaded the files and shared them.  These are the links
    Grade 11 Maths Standardisation Project Paper 2 2013.doc
    https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
    Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
    https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
    Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
    https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
    Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
    https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
    Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
    https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
    Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
    https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
    The first file is the problem file.  If you create this file separately, Acrobat will convert it perfectly.  But "Batch create multiple files" and the graphics are deconstructed on page 8

  • Acrobat 9 Pro - Batch Create Multiple Files from InDesign CS5 files

    When attempting to batch create PDFs from Indesign CS5 files using Acrobat Pro 9's File>Create PDF>Batch Create Multiple Files ... option the operation fails with the error 'Could not find the application that created this file: [path to file] Please select a file created by an application that resides on your computer.' as shown in the screenshot below:
    Acrobat 9 Professional was bundled with Creative Suite 5 Design Standard so shouldn't this work? My machine is running OS X 10.6.7, Acrobat Pro 9.44 and InDesign CS5 7.04.
    Any help to solve this issue would be most gratefully received - this feature had previously saved me a lot of time on my old machine with 10.5.8, Acrobat Pro 9 and CS4.

    I have uploaded the files and shared them.  These are the links
    Grade 11 Maths Standardisation Project Paper 2 2013.doc
    https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
    Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
    https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
    Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
    https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
    Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
    https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
    Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
    https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
    Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
    https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
    The first file is the problem file.  If you create this file separately, Acrobat will convert it perfectly.  But "Batch create multiple files" and the graphics are deconstructed on page 8

  • Acrobat 9 - Batch Create Multiple Files

    Hopefully someone can help me with this problem, or at least shed some light on it for me.
    I am using Acrobat 9. I have Creative Suite 4 (InDesign, Illustrator, Photoshop, etc.) There is a new feature in Acrobat 9 called "Batch Create Multiple Files", which can be found in the File menu, under "Create PDF".
    This feature is supposed to create pdfs from multiple native file types, including InDesign. Acrobat uses the native application, in this case InDesign CS4, to open each file selected in the batch and then create a pdf file from it. This would be a really cool feature if I could get it to work.
    Each time I try to run this, I get an error message stating "Cannot open the document". I have an operator who can get this to work, if they use CS3 InDesign documents (she also has CS3 installed on her mac), which doesn't make sense to me because Acrobat 9 is a part of CS4.
    Is it possible that I am missing a plug-in? Has anyone experienced a similar problem, or does anyone have a solution for me?
    Thanks,
    Jeff

    You should remember that Acrobat 9 Pro came out BEFORE InDesign CS4. It has not yet had an update. The release InDesign CS4 format DID NOT EXIST when Acrobat 9 Pro came out, so it cannot yet convert it.
    You'll have to wait for an update to Acrobat 9 Pro.

  • Combine functionality Batch Create Multiple files and Set Security

    Greetings,
    Is there any way to combine the functionality of Acrobat Pro’s “Batch Create Multiple Files” (File (drop down) -> Create PDF -> Batch Create Multiple Files…) and running a batch process (Advanced -> Document Processing -> Batch Processing -> Batch Sequences -> Set Security)?
    Ideally I’d like to either:
    1)      Add the “Set Security” batch process to the “Batch Create Multiple Files … command located under the File (drop down) -> Create PDF
    or
    2)      Be able to create a batch process that first allows me to select the documents (Word, Excel, etc.) I want to convert into PDF files, then converts them, then runs the Set Security batch process.
    Right now it isn’t too much trouble to first “Create Multiple Files…” then run the batch process Set Security, but it would be nice to be able to do both with a single command.
    Any suggestions?
    Thank you,
    TPK

    I have uploaded the files and shared them.  These are the links
    Grade 11 Maths Standardisation Project Paper 2 2013.doc
    https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
    Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
    https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
    Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
    https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
    Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
    https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
    Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
    https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
    Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
    https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
    The first file is the problem file.  If you create this file separately, Acrobat will convert it perfectly.  But "Batch create multiple files" and the graphics are deconstructed on page 8

  • Batch create multiple files in a script

    I have 130,000 gif files I want to convert to pdf.  I can only batch convert about 1,500 at a time, acrobat will bomb out if I do more.  Is there a script I can use to process all my files ?
    Thanks,
    Alex

    I have uploaded the files and shared them.  These are the links
    Grade 11 Maths Standardisation Project Paper 2 2013.doc
    https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
    Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
    https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
    Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
    https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
    Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
    https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
    Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
    https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
    Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
    https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
    The first file is the problem file.  If you create this file separately, Acrobat will convert it perfectly.  But "Batch create multiple files" and the graphics are deconstructed on page 8

  • Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

    Hi,
    I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
    I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
    Reference:
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html  see advanced panel options
    http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
    System: Windows 7
    Acrobat: Acrobat X professional
    i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
    %  Insert your custom PostScript here...
    [ /PageMode /UseThumbs
    /Page 1 /View [/Fit ]
    /DOCVIEW pdfmark
    After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
    Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
    So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
    Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

    i like it about that ok in how to open my site

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • Changing the catalog profile when creating a QN FROM ACTION BOX in transaction QM02

    Hi All,
    When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
    always copied from the QN being preocessed in QM02. (current QN)
    I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
    If I change the catalog profile in the material master, it works, but that is not a solution for me.
    Need the exact point where I can pass in a different catalog code.
    Also, I do not see the new QN number anywhere while debugging.
    PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
    Thanks.

    Hi All,
    When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
    always copied from the QN being preocessed in QM02. (current QN)
    I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
    If I change the catalog profile in the material master, it works, but that is not a solution for me.
    Need the exact point where I can pass in a different catalog code.
    Also, I do not see the new QN number anywhere while debugging.
    PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
    Thanks.

  • How to resize and change the resolution of a batch of photos using Automator

    I searched for a long time tonight looking for the answer to this (seemingly) simple question:
    How do I use Automator to scale and change the resolution of a batch of images?
    It was not so simple.
    Links to this question:
    https://discussions.apple.com/message/12341246#12341246
    https://discussions.apple.com/message/12342026#12342026
    https://discussions.apple.com/message/5785047#5785047
    https://discussions.apple.com/message/1173358#1173358
    https://discussions.apple.com/message/5641853#5641853
    https://discussions.apple.com/message/3207516#3207516
    These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
    You can actually manage this in Automator.
    Here are the steps that worked for me:
    Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
    Step 1 is Copy Finder Items
    My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
    <==  You'll have this guy soon!
    As a result - I want to copy the originals to my computer as step 1.  I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
    Step 2 is the Scale Images action - you can search the library for this and find it quickly.  For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog.  Change this value to whatever you wish.
    Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
    #bin/bash
    for f in "$@"
    do
         /usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
    done
    Save this application (I named mine "Format Photos")
    Place the application inside the target folder where you want the images to end up.  I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there.  I select my images as I mentioned and drag them on top of this app.  The app copies the originals and the conversions into the folder.
    NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size...  This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData.  However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original).  My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb.  Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
    This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood.  If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
    This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle. 

    PPI is pixels per inch of the image.  It is difficult to increase resolution as you are trying to add data that is not there.
    But for printing purposes what you want is dpi or dots per inch.
    The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

  • Change the PDF form In HAP_DOCUMENT

    Hi Experts,
    1)I have a requirement wherein i need to change the pdf form that is generated when we click on download button in hap_document bsp application. I need to use the custom PDF form in place of the actual PDF form. How can i acheive this?
    2) In the layout, i want to replace some part of the screen with an interactive adobe form how to acieve this?
    Thanks and Regards,
      Madhu.

    This should not be handled by ABAP. If they were able to change it in the sales documents, they should be able to cancel the invoice in VF11 and create another one. That's the best practice.

  • How to Change the PDF's that are generated once the Payment run completes

    Hello All,
    After the Payment run completes, it creates a bank file, and check registry etc.  Our system also creates a PDF which is sent out to the vendors via email.  I need to make some changes to this PDF that is being generated.  Where can I do this?  The pdf sits in the Business Workplace.   Any ideas?
    Thanks,
    Rashad

    It is not possible to change the PDF manually.
    You need to change the form assigned for payment advice in FBZP settings.
    However, these settings are uniform and across all the vendors.
    You cannot put different rules for different vendors.
    Regards,
    Ravi

  • Need log of the users who changed the partner profiles.

    Hi,
    Some user has been changed partner profiles of the CUA configuration Setup.
    It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
    It will be appreciate if anybody can help in this issue.
    Thanks,
    Shiva.

    I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
    Now its working fine.
    But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
    And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
    EDIPHO
    EDMSG
    EDP12
    EDP13
    EDP21
    EDPP1
    T002T
    T005T
    Regards,
    shiva.

  • Changing the default profile

    Is there a way to change the default profile that is assigned to new users? In other words, instead of user JONES being assigned DEFAULT if no profile is specifed in the create user statement, I want to set up the database so that MY_PROFILE is the profile that is defaulted to instead? This is in Oracle9i R2.

    Hi,
    Yesterday, there was a thread with the same subject, and it seems that you can (thanks to Yoann) :
    Can I alter the default profile
    Nicolas.

  • Possible to change the business Partner from a created Contract in ICWEB??

    Hello experts,
    I would like to know if it is posible to change the BP from a created contract in ICWEB.
    I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
    Can you help me, please??
    Thank in advance.
    Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

    Hello S Reddy and a lot of thanks for your help.
    But I don't know where I can select this option, there isn't the  where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
    Thanks in advance.
    Regards.

Maybe you are looking for

  • Interest calculation on secured loans

    Hi guys, I have a customer invoice at 1000 rs after that i have been paid to customer for 5000 rs. The difference amount of 4000 rs (5000 - 1000 ) we have considered as a secured loan. So how can i calculated the interest on the 4000 rs only. Please

  • IPhone 4 has restrictions after resetting;

    iPhone 4 has restrictions after resetting; cant get texts from people unless they have iPhone. How do I clear this restriction?

  • Making non-printing characters visible

    Hello all, I am trying to find a method that will make spaces, non-breaking spaces, newlines, tabs, etc have a graphic representataion in rendered text, like the "Show Invisibles" or "Show Codes" features of most word processors. I tried several Goog

  • [svn] 719: Added package and class level javadoc.

    Revision: 719 Author: [email protected] Date: 2008-03-03 11:34:54 -0800 (Mon, 03 Mar 2008) Log Message: Added package and class level javadoc. Modified Paths: flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/Configuration.java flex/sdk/tr

  • MessageChoiceLOV issue - URGENT

    Hi, I have a poplist with 'n' entries.User should be able to search additional data(in a popup window) and selected data should appear as (n+1)th entry in the poplist. I want to know whether MessageChoiceLOV could be used for my requirement. Requirem