Changing the pin code

how do I change my PIN code?
No need to reply just to say it's not safe, I might forget it and all that.

Hi Rushafs ji,
I supposed you meant the SIM pin code. I'm assuming that its a S60 OS. If so, you should be able to do it at Menu, Tools, Settings, Security, Phone and SIM, PIN code. Mobile lock code would be Lock code instead of PIN code.
Hope this helps.
Cheers.

Similar Messages

  • HT1316 How do i find the pin code change after the latest update?

    How do i find the pin code change after the latest update? The IOS changed the order of things now

    There are two things you should be talking about here.  If its the Passcode, then this article may help you. (Pretty much restore your device)  http://support.apple.com/kb/ht1212  If it's asking for a SIM PIN, then thats covered here. http://support.apple.com/kb/ht1316  Hope this helps!

  • Can any body tel me the pin code of macBook pro

    Tel me the pin code combition of macBook pro.

    What exactly do you mean by the pin code combination of the MacBook Pro?  Are you looking for the model number for an MBP?  That will change for specific year/updates to the hardware.  Look at http://www.everymac.com for specific MBP year/models and see if what you want is in the available information.

  • I changed my pin code on my phone and forgotten it, how do I get in to my phone

    I changed my pin code on my phone last night and have  forgotten it. How do I get back into my phone or change it?

    You'll have to restore it as new using the computer/itunes you normally use.

  • Is there a way to change the pin color in iPhoto so I can pin my photos  and places from those from others.  i think it would be cool to see where my friends have also been but not mix it with mine.  Thanks

    s there a way to change the pin color in iPhoto so I can pin my photos  and places from those from others.  i think it would be cool to see where my friends have also been but not mix it with mine.  Thanks

    No
    Suggest to Apple
    You can make a smart album based on camera to seperate photos
    LN

  • Change the Tax Code-  In Sales Order i have  Tax code for VAT

    In Sales Order i have  Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
    Where the "P4" Tax code is picking in Sales Order.
    How to change the Tax Code.
    Urgent

    Hi CHAKRI,
                     Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
    Regards
    Ram Pedarla

  • How to change the vendor code in intercompany PO

    actually PO was created with wrong vendor code. after this MIGO done, all the product sale out MIRO done invoice done. Now at this point *what we 'll have to do to change the vendor code*

    HI,
    actually PO was created with wrong vendor code. after this MIGO done, all the product sale out MIRO done invoice done. Now at this point **what we 'll have to do to change the vendor code**
    it is not possible to change vendor code in PO
    you have to do new PO for that
    Regards
    Kailas Ugale

  • How do I change the Version Code in the Flash Android settings Android app market?

    I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
    "The new apk's versionCode (1000000) already exists."
    In the Flash Adnroid settings I changed the version label but that did not help.
    So I have two questions:
    How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
    What is the difference between the version number and version label?

    I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
    This is the what the XML file says:
    <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    <application xmlns="http://ns.adobe.com/air/application/2.6">
      <id>com.company.nameofapp</id>
    //Below is the correct version number, but has no relation to the version code.
      <versionNumber>1.1.0</versionNumber>
      <versionLabel>NewLayout</versionLabel>
      <filename>Name of app</filename>
      <description/>
    I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html)  But I don't know how to place it into the xml file without conflicting with other code.
    <?xml version="1.0" encoding="utf-8"?>
    <manifest xmlns:android="http://schemas.android.com/apk/res/android"
          package="com.example.package.name"
          android:versionCode="2"
          android:versionName="1.1">
        <application android:icon="@drawable/icon" android:label="@string/app_name">
        </application>
    </manifest>
    Any other thoughts are much appreciated.

  • How do I change the Version Code in the Flash Android settings for the Android app Market?

    I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
    "The new apk's versionCode (1000000) already exists."
    In the Flash Adnroid settings I changed the version label but that did not help.
    So I have two questions:
    How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
    What is the difference between the version number and version label?

    I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
    This is the what the XML file says:
    <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    <application xmlns="http://ns.adobe.com/air/application/2.6">
      <id>com.company.nameofapp</id>
    //Below is the correct version number, but has no relation to the version code.
      <versionNumber>1.1.0</versionNumber>
      <versionLabel>NewLayout</versionLabel>
      <filename>Name of app</filename>
      <description/>
    I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html)  But I don't know how to place it into the xml file without conflicting with other code.
    <?xml version="1.0" encoding="utf-8"?>
    <manifest xmlns:android="http://schemas.android.com/apk/res/android"
          package="com.example.package.name"
          android:versionCode="2"
          android:versionName="1.1">
        <application android:icon="@drawable/icon" android:label="@string/app_name">
        </application>
    </manifest>
    Any other thoughts are much appreciated.

  • I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code). Works fine from the Iphone as such. When I connect my Iphone in Bluetooth to my car, only the phone

    I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code).
    Works fine from the Iphone as such.
    When I connect my Iphone in Bluetooth to the voice-driven system in my car (Mercedes C), only the phone number appears to be transmitted. Entering a conference call number via the Iphone while driving is not a good idea.
    How can I fix this ?

    That *****.  I sell electronics on ebay.  Before listing them, i have to test and clean them. I have worked with microsoft Zune, you could sync via wireless through the network to your host computer. 
    i was hoping Apple would add that feature or the ability to connect to my computer via WiFi or Bluetooth and sync it wirelessly...   It would be sweet to have the bluetooth and wireless opened up so you can do more than just  connect to headphones or a headset... 
    I upgraded to the iPhone 4 this past december, i am on replacement # 2 or my 3rd iPhone 4...  I was hoping for some upgrades in quality.  Also being left handed, it seemed to drop many calls and give me very poor reception.  i added a Griffin Elan Form Graphie case that covers all but the front, top button, bottom speakers and volume control buttons and the call and reception quality has improved.  But I sure would have loved to see some improvements in the quality and function of the phone...
    Thanks for your input, i really appreciate your replies... 

  • My DVD Player hangs when trying to change the regional code the first time

    Hello,
    I am new to this forum and I couldn't find one for the DVD Player specific so I chose this one. Please direct me to a different one if my eyes were misleading me.
    I have a new Macbook. Just over three month now and I attempted to watch a movie with the DVD Player last night the first time. When inserting the DVD, the DVD player comes up with a Screen asking me to change the Regional Code from 6 to 1. I don't understand this in the first place since I purchased my Mac within the US. But anyway, When I unlock it with my password and then click the "Set Regional Code" Button (Regional Code preset to one at this time), it turns blue and then the rainbow wheel for being busy shows up. Unfortunately it never leaves and going to the activity monitor it says (Not responding). That causes bad Windows Memories .
    Tried multiple ways, let it run for 10 hours and it never returns to the world. Very frustrating, since this is the first time I tried to use this feature.
    Is there any advice on how to set this to Regional Code 1. I only have to set it once, but I think there must be an option.
    And yes, I know of VLC, but I still would prefer to use this regular DVD player. I think this should work somehow.
    Computer out of the box, nothing other then iWorks and MS Office 2008 installed.
    Any help is appreciated.
    Thanks a lot
    The Dark Lord
    Bernd

    Does the account you are using have admin rights? I found this :
    http://support.apple.com/kb/HT2397
    +In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
    Sounds like it might be worth a try from an admin account first.

  • Any way i can change the region code after the fifth time?

    I wasn't aware about the region code being lock after the fifth time.
    Is there any way I can change the region code instantly?

    No, the drive is permanently locked to the last code you used. If it's not on the one you would prefer, the only thing you can do it replace the drive.
    Almost all drives you can get are region free. I couldn't tell you why Apple continues to use drives that require selecting a region.

  • Restrict changing the tax code in purchase order after goods receipt.

    Hi,
    Po is created with tax code x1.
    Gr is done for partial quantity.
    IR is still pending.
    User has changed the tax code to x2.
    This case we want to restrict the tax code change in PO after goods receipt.
    Please advice.
    Regards
    Ravi Kumar

    Hi Sumit,
    Po created with wrong tax code x1.
    Stores person has done the receipt and consumed the stock.
    Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
    In IR we will use correct tax code and post the accounting entry.
    Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
    Point is user's are asking that how system is allowing to change the tax code after receipt.
    Point to be attended is restrict the change of tax code by any means after Gr has happened.
    what are the possibilities to restrict the change of tax code.
    Regards
    Ravi Kumar

  • What is the Pin Code for unlock for Macbook Air System Lock ?

    What is the Pin Code for unlock for Macbook Air System Lock ?

    It usually means that the  owner of the device sent a directive through icloud(find my mac), to lock the device because it has been stolen.
    The only means to unlock the device is to have Apple (Apple Store) unlock it for the owner. If you are the owner, be prepared to show proof of legitimate ownership. It is likely that Apple will want to contact the registered owner to make sure that the device has been legitmately transferred.
    I'm really thinking you may have bought stolen property. Ask the seller why it is locked, and if the device is registered to him/her, to release the registration on Apple's website. Only then, will you be able to re-register the device in YOUR name.

  • Change the tax code issue in fs00

    Dear Sapgurus,
    in production i create one g/l code user id : mydr123 T code is fs00 g/l code number 300000 account name is sales, account group is p&l and account currency inr, tax category ">" , now i am going to change tax category * while saving the g/l system is not accepted  itsshowing error message "     1) Changing the tax code not possible; account has a balance
    2) The data contains error, you cannot save, but if i choose"-" its accepted please tell me
    Regards
    Myfriend

    Hello MyFriend,
    If you wish to make a direct posting to a tax account you must have
    the gl account active in transaction MIRO.
    Please review the online documenation located via help -> sap
    library -> materials management -> logistics invoice verification ->
    Direct postings -> direct posting to gl account
    here you can see the setttings for same in customizing are
    Setting in Customizing for Logistics Invoice Verification
    As per error message FH081, it arises only if the account had perviously
    the tax category ">" or "<". They cannot be changed anymore
    if the account has a balance. The tax categories "-", "+", "*" etc.,
    can be changed, you will get in FS02 only the warning FH011.
    Please check GL account xxxxxx with FBL3N, to see if there is a balance
    still left. To make the account balance zero, you might try transaction
    FB41, this allows you to post directly a balance to the Tax gl account
    even when the flag "Post to automatically" is set.
    I hope this helps
    Regards
    Ray

Maybe you are looking for

  • OS Language change

    I have purchased a G710 Laptop in France and was told I could change the OS to English, I have downloaded  Windows 8.1 in English but how do I change the OS from French please 

  • How I store my sound file in my database table

    Dear friend i make a table for store sound file table is create . but now how i insert that file which is at 'c:\my document ' to this table. i try following command but it has a error insert into sound values('c:\my document\abc.au'); what i do for

  • Open file with reference

    Hi I want to open files with a reference in hidden mode. Is this possible? Because I want to make a program where the user can choose a new test station and then the controls and indicators will be created (or become visible) and the subroutine begin

  • DVD Copy Protection on iPod 5G

    I have software to rip DVD to MP4 format. I have Star Wars Episode I and II on my iPod. but can't put animated Clone Wars or Episode III. Is there a way to make it able to put them on it. Thanks, Art

  • Late 2008 Macbook Pro doesn't boot after installing Mavericks

    I have a late 2008 Macbook Pro, dual core 2.53 GHZ, 4 GB Ram (2x2). I've been tearing my hair out trying to get this computer to boot up.  Many things have been tried here.  So here's the history. Before starting this, I was running 10.6.8 on this co