Changing the print order for payroll checks and payroll deposit advices
Hello,
How do you change the print order of payroll checks and deposit advices?
Thanks
RW
Hi there crazytalk,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
Printing issues i'm not able to change the print order it always prints back to front.
I have an HP Pavilion model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!!I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
How to reproduce:
1) Exit LabVIEW completely (VERY IMPORTANT)
2) Open and run the attached VI
3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
4) press on the print button
5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
Changing the value with the arrows is possible.
6) stop the VI.
7) restart and no problem will occure.
8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
Attachments:
PRINTfp.vi 28 KB -
When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?
Can I use it somehow or should I ask for a different one that is compatible with my computer?
No, that's not necessary.
You Mac most likely sat in inventory before it was sold so the latest drivers were not installed.
If you tried using the printer and couldn'tget it to work, go here > http://www8.hp.com/us/en/support-drivers.html
If this is a USB connected printer, make sure it's connected to your Mac, then at that link click: Detect Your Product
Download and install drivers for v10.7 / Lion. -
How do I change the Sort order for Music Video's on the iPad
Hi All,
Apologies if this has been dealt with elsewhere - I can find posts about sort order for TV Shows and Movies but not Music Video's.
When I sync my music video's the appear in Track order in the video app and I cannot find how to change the sort order to 'by Artist' (or any other order come to that).
Any ideas please>Hi!
Im afraid I believe this cannot be done yet. Sorry!
You can try submitting feedback to apple by clicking [here|http://www.apple.com/feedback/ipad.html] if you wish.
Hope this helps! -
How do I change the print orientation for PDFs with mixed orientation pages?
I'm sure this is a fairly basic and easily solvable issue, but I've been searching for a solution and can't find one for the life of me.
The issue: I'm printing a PDF that will be bound book-style, and the file contains pages with mixed orientations (both portrait and landscape). When I print the file, the landscape pages point the wrong way, to the left of the spine, when they should be pointing down to the right of the spine. I've adjusted the print settings for multiple test rounds, and nothing seems to work. Here's a visualization of the problem (apologies for the bad Paint art):
What the book is doing now when it prints:
What I need it to do:
Here's the caveat: I cannot just rotate all the landscape pages counter-clockwise in Acrobat for ease of printing, because it would remove the ability to scroll through the file quickly in Reader or a Web browser, and the same file needs to be both easily readable digitally AND print correctly.
Is this adjustment a print setting? Is this a tool I'm overlooking within Acrobat? Is this outside the scope of what is adjustable? All advice is welcome, and please feel free to ask any follow-up questions if I explained my problem unclearly.If you are trying booklet printing, try to rotate the pages as needed before you print to the booklet. If you are print booklets without using professional imposition software, then Quite Imposing or Quite Imposing Plus should be considered. I believe they offer a demo version.
-
I have a HP photosmart B110 and Macbook Air I need to print double sided but there doesn't seem to be any options on the system preferences to change to double sided, I was able to print double sided with my old laptop which was Dell and allowed me the option under printer preferences but there is no option for that either i use pages for my documents and download documents through my university andy help appreciated
My HP Officejet Pro 8600 plus has dual sided printing
HP 5550dn Lost double sided printing with Mavericks driver -
How to change the execution order of data control and backingbeans
Hi,
I have a form for a BPM human workflow. It has an inputText and a selectOneChoice component in the form.
The list of value for the selectOneChoice is initiated based on the value in the inputText.
I have a data control - JavaBean, which returns a list of values based on a parameter for the selectOneChoice and the parameter is binded with the value of inputText defined in a backingBean. I also set the default value of the inputBox in the backing bean with setValue().
The problem I have is that the data control for selectOneChoice is loaded before the inputText or backingBean is loaded. Therefore, the parameter is null.
I tested the same combination in an ADF web app and it works fine. In the app, the inputText and the backingBean are loaded first and then the value of inputText is sent to the data control.
How can I change the order of the execution? I need to make the inputText and backingBean loading first before the data control for the list of values loading.
Edited by: user626218 on Oct 10, 2012 9:25 PMHi,
The inputText is pre-populated based on the user profile in the BPM instance. I tried to render the selectOneChoice if the value of the inputText exists but the data control for selectOneChoice is loaded before the backingBean so it keeps getting a null as parameter. -
Change the printer code for eprint services
I need to change printer code for eprint services
Is it not accepting the printer code that printed out on the information page? Is it giving an error message at the website when you enter that code? If that code is over 24 hours old the site will not accept that code. You would just have to reprint the info page again from the web services icon on the display screen. For most printers, that icon is in the top left corner and looks like a piece of paper with a target behind it, generally speaking. The code, 90% of the time, will not change and will be the same. The page just has to be reprinted as the 24 hour time limit is a security measure. If you need further assistance beyond this please let me know what printer model you have and the model of router you use in your wireless setup. If you need assistance finding your product number so that the exact model of printer can be pinpointed, look at this link here. It shows how to locate that number for any HP product that you may own.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
i had to change the email address to my apple id. now when ever i try to use imessage or the icloud, it wont let me because it is using the old email address. i cant change it on my phone and idk what to do on my computer!
If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Change the Apple ID for a game and not lose the progress made?
Short version of my question: can I change the apple id associated with a game to another one and not lose the progress made in the game thus far?
Long version: when there were only a few iGadgets in the house, all games and music were downloaded through Alpha's apple id and the credit card tied to that account. Now, we two folks have multiple iGadgets between the both of us and Beta has her own apple ID. Because we only used one apple id for so long, Beta has some games installed through Alpha's account and her own Beta account. Beta would now like to change the account the game PocketTimeSuck is associated with from Alpha's account to Beta's account without losing any of the progress made in this game which she has been playing for over a year.
Is there any way of re-installing PocketTimeSuck onto Beta's device under Beta's apple ID and maintain the progress in the game she has made after installing it under Alpha's apple id? Alpha would like to start playing PocketTimeSuck but cannot install it under her own apple id because it comes with all of Beta's progress.
(Also, if this is not the right forum, please let me know where I should post this question. Don't flame me, just tell me.)I'm getting confused by the Greek alphabet here so I will explain it this way and hope I understand what you are asking.
Beta has been playing a game that she downloaded using Alpha's ID but now Beta would like to transfer the game and all of its progress to her own ID. That is not possible to do. The game was bought with Alpha's ID and is now associated with that ID and that progress is part of Alpha's backup.
Alpha now wants to play the game under her own ID but the game is associated with her ID already. If she wanted to, she could just pick up where beta left off and leave Beta out in the cold. Somehow I don't think that is a good solution for either Alpha or Beta.
Alpha should probably create a new Game Center account and start all over again with her own Game Center account. Beta will obviously have to do the same thing if she wants to play this game using her own Apple ID on her own iGadget.
So if I do understand correctly, Alpha and Beta will both have to start over again. Howver, I could be confused because this is all "Greek to me". -
How do I change the default language for spell-checker please?
I have seen the instructions below but cannot find the Personalization section?
I currently have a US English spell-checker, I need a UK English one.
Changing The Default Language
Make sure you are on your homescreen.
Tap on the Settings app to open the Settings App.
Scroll to the Personalization section.
Tap on Language.Have just found that if you select Install Language Pack but then, do NOT download it, just below and to the right of "Download Now" is "View other versions".
Click on that and the second item is Version28.0
Hover your mouse on that and you get " + Add to Firefox" - so select that. -
Changing the printer cartridges for a HP laserjet 2840
Having a problem with the wheel not going to the next cartridge...there is a message on the display saying "incorrect yellow" but the yellow cartridge has been taken out and it will not go to the next slot. I am out of warranty and need my printer can anyone help??
I have a similar problem, maybe its the same for you, im my case the printer broke down because the cyan ink cartridge was not properly placed on the printer. An error of “Incorrect Yellow” was prompted on the printer screen because it was the yellow cartridge that ended up on top because the cyan ink got stuck at the bottom. What I did was I opened the printer and lifted the lock for the ink rotator. It’s located on the right side of the rotator if you were facing the printer. It’s a silverish metal in between the group of gears. I lifted it up using a screw driver. I was able to rotate back to the improperly placed ink cartridge and replace it back. properly. When latched properly the printer worked again. I’ve placed the top cover back and its ready for printing again. I got the instructions on how to open the top cover in the link below
http://h30499.www3.hp.com/hpeb/attachments/hpeb/bsc-413/172137/1/329430.pdf -
Can you change the FTP URL for Azure Websites and link to a Domain Name FTP?
I have created an Azure Website, and have regisetered the correct Domain Name details for the site. What i want to understand is can i do the same for the FTP address via Azure?
Rather than use the default ftp://waws-XXX-XXX.ftp.azurewebsites.windows.net/ i want to change to be FTP.<Domain Name>.comi do not see the option to do this via Azure?
would i have to create a CNAME on my domain registrar to deal with this instead?are you able to ftp to domainname.ext?
if you can ftp to domainname.ext and instead you want to ftp to FTP.domainname.ext then yes you need dns map -
Hello,
Office 2010 32bit, VBA
Is it possible to programmatically do the above while Outlook is running? If so, I'm hoping to make that change from a Word macro.
I tried tinkering with the reg key and that doesn't work because it appears Outlook only respects it at startup time. Similary changing Word File-options-location of documents is respected only when Outlook starts.
I'm looking to seamlessly keep Outlook's default folder in sync with Word's default folder as the users change working folders in Word, which they do many times per day (and they chose the folder among a couple of thousand possibilities).
I'm hoping there is a difficult-to-find Outlook object I can manipuate to get to the end result. IF there is such an Object I have been unable to find it.
Many thanks!
JulieHi Julie,
Based on my research, I think outlook object model doesn’t provide the way to change the default folder for insert attachment and save email/attachment.
The way to change it is that we need to modify the registry setting and the outlook app should be restart.
# How to set the default attachment folder in Outlook
https://support.microsoft.com/kb/252732?wa=wsignin1.0
You may create the add-in to custom these actions (e.g. attach attachment, save email)
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can i change the temporary tablespace for schemas during the transactions??
In My Prod database some of the tablespaces assigned system as Temporary tablespace. I want to change the temporary tablespace for these schemas and the default temporary tablespace of the database.
Can I make this change while the users are accessing the database. Is there any impact If i make this change while the transactions are running.
Below is the change i want to do........
1. Change the users for SYSTEM to TEMP in the temporary tablespace by executing the following SQL
statements:
alter user SYSTEM temporary tablespace TEMP;
alter user SYS temporary tablespace TEMP;
alter user AD_MONITOR temporary tablespace TEMP;
alter use SI_INFORMTN_SCHEMA temporary tablespace TEMP;
alter user EM_MONITOR temporary tablespace TEMP;
alter user ORDPLUGINS temporary tablespace TEMP;
alter user TSMSYS temporary tablespace TEMP;
alter user XDB temporary tablespace TEMP;
alter user SCOTT temporary tablespace TEMP;
alter user DBSNMP temporary tablespace TEMP;
alter user DIP temporary tablespace TEMP;
alter user OUTLN temporary tablespace TEMP;
alter user ANONYMOUS temporary tablespace TEMP;
alter user ORDSYS temporary tablespace TEMP;
alter user MDDATA temporary tablespace TEMP;
2. Set the default temporary tablespace to TEMP by executing the following SQL statement:
alter DATABASE default temporary tablespace TEMP;user11829256 wrote:
But if one transaction is using the old temporary tablespace and if i change the temporary tablespace of user will that transactions of that user fails which is using the old temp segment....It will continue to use the old one till the end of transaction.
Here a quick test (hopefully readable) :
-- session 1 as a dba user
SQL> grant create session to nga identified by nga;
Grant succeeded.
SQL> alter user nga temporary tablespace tmp;
User altered.
SQL> select temporary_tablespace from dba_users where username='NGA';
TEMPORARY_TABLESPACE
TMP
-- session 2 as NGA
SQL> insert into gtt
2 select * from (select * from all_objects union all select * from all_objects union all select * from all_objects);
80559 rows created.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
TMP
SQL> alter user nga temporary tablespace pstemp;
User altered.
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
TMP
SQL> select temporary_tablespace from dba_users where username='NGA';
TEMPORARY_TABLESPACE
PSTEMP
-- session 2 as NGA
80559 rows created.
SQL> roll;
Rollback complete.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
no rows selected
-- session 2 as NGA
SQL> insert into gtt
2 select * from (select * from all_objects union all select * from all_objects union all select * from all_objects);
80559 rows created.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
PSTEMPNicolas.
Maybe you are looking for
-
Is it possible to EXPORT video films from the iPod to iTunes ?
EXPORTING FILES FROM IPOD TO ITUNES Obviously, I know how to send files from iTunes to iPod. But is it possible to do the opposite way ? I have video files on my iPod that got lost on my hard drive. I'd like to save them back to the hard drive (and i
-
How to pass the javascript variable value to a jsp
Hi I am trying to set a javascript variable with onClick event of a radio button in jsp and I am assigning this variable to a hidden property in JSP whic has the corresponding getter an setter method in form. But I am not able to retrtieve the value
-
My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back? thanks
-
Need help in troubleshooting communication channel using soap adapter
Hello friends I have a simple scenario. I have created 2 communication channels, one for searching a record and another for updating it with a new value Both uses SOAP as sender and RFC as receiver with a Standard BAPI. Everything was working ok, but
-
TDS certificate numbers according to Business Place for one key
Dear all, I am trying to generated TDS certificates through J1INCERT. I am able to generated certificate numbers also. But I want to generate the certificate numbers according to my business place. EX: I assigned number range as 200001 to 299999.