Changing the print program

Hi all,
I have the print program y_rvadin01 for script for printing invoice.
Its giving the wrong value for the priceunit.
When i checked for the program the field value vbdpr-vrkme is wrong we have to use vbrp-vrkme instead.
i want to change the program with this field value.
I want to know which steps to consider to change the value from vbdpr-vrkme to vbrp-vrkme bcoz the structure is used lot of times in the program so without disturbing the program.
please kindly provide me some hints.
with regards
chandu.

Hello,
The way I would do this is from the layout set. I would use a perform statement.
In the sapscript:
i.e. Define &ZVALUE& = ''
PERFORM GET_VALUE IN PROGRAM ZTEST
USING &vbrp-vrkme& (value to send to ABAP)
CHANGING &ZVALUE& (VALUE sent from ABAP to SAPSCRIPT)
This will send value of &vbrp-vrkme& to the test program.
you can then use this value in the test program and extract further information from SAP Tables and send it back to the form.
In the test program (to get value from SAPSCRIPT and send value back)
form GET_value TABLES INPUT_TABLE STRUCTURE ITCSY
out_par_tab STRUCTURE itcsy.
Input values are in input_table.
output values to sapscript needs to be updated to out_par_tab.
You should have examples of this in some customized forms.
i.e. PO, Sales Invoice etc.
Hope this is useful.
Shiva Ziaie

Similar Messages

Change the print program from the Transaction F150

Hi all.
Does somebody can help how to change the print program in the transaction F150?.
I have copied the F150_dunn_01 (form) and the SAPLF150 (printprogram)
This transaction calls the form F150_dunn_01 I want to know how to assign to this transaction my print program ZSAPLF150
Thanks and regards.

Hi Srinivas Adavi.
Ok, I have taken this path...
IMG-->Financial Accounting
     -->Accounts Receivable and Accounts Payable
       -->Business Transactions
         -->Dunning
           -->Printout
In this, appears:
Define Dunning Forms (with SAPScript)
Define Dunning Forms (with SAP Smart Forms)
Assign Dunning Forms
Define Sender Details for Dunning Forms
Develop Enhancements for the Dunning Print Program
Attached Payment Media
   -->And So On.
What are then next steps to make the configutation; sorry I'm newbe jeje

CHANGE OF PRINT PROGRAM IN SAPSCRIPTS

CAN ANYBODY EXPLAIN HOW WE CAN CHANGE THE PRINT PROGRAM IN SAPSCRIPTS?

Hi Kumar,
Go to NACE transaction, Based on the Output type take the Driver program related to your Script
copy it to Zreport and do the changes as per your requirement.
When we wants to fetch data from some other tables into that program we have to write code and to fetch the data into internal tables or variables, and they are used in Script.
reward points if useful
regards,
ANJI

In photoshop cs6 if i try to change the printer it crashes the program

in photoshop cs6 if i try to change the printer it crashes the program

Nobody can tell you anything without proper system info or other technical details like crash logs, printer info and so on.
Mylenium

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

To change the printer name while printing the invoice

Hi,
I have a requirement like if there is already an entry in NAST table with o/p type ZURD and printer name USJC-PM03,then an error message has to be displayed like 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' on the vf03 screen.
But even if I change the printer name from 'USJC-PM03' to 'LOCL',it is showing the same error message.This message should not be shown.
I have used the following code in the program.
lf_formname = tnapr-sform.
determine print data
PERFORM set_print_data_to_read USING    lf_formname
                                 CHANGING ls_print_data_to_read
                                 cf_retcode.
IF cf_retcode = 0.
select print data
    PERFORM get_data USING    ls_print_data_to_read
                     CHANGING ls_addr_key
                              ls_dlv-land
                              ls_bil_invoice
                              cf_retcode.
ENDIF.
IF sy-tcode = C_VF03.
    SELECT SINGLE * FROM tnapr WHERE kschl = 'ZURD'
                                   AND nacha = 1
                                   AND kappl = 'V3'.
    SELECT count(*)
    FROM NAST
    INTO lv_count
    WHERE objky = ls_bil_invoice-hd_gen-bil_number
    AND    kappl = c_v3
    AND    kschl = c_ZURD
    AND   ldest = c_PM03.
    IF LV_COUNT GE 1.
      Message e000(zup) with text-001 text-002 text-003.
    ELSE.
determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING formname           = lf_formname
                variant            = ' '
                direct_call        = ' '
             IMPORTING fm_name            = lf_fm_name
             EXCEPTIONS no_form            = 1
                        no_function_module = 2
                        OTHERS             = 3.
call smartform invoice
          CALL FUNCTION lf_fm_name
               EXPORTING
                          archive_index        = toa_dara
                          archive_parameters   = arc_params
                          control_parameters   = ls_control_param
                mail_appl_obj        =
                          mail_recipient       = ls_recipient
                          mail_sender          = ls_sender
                          output_options       = ls_composer_param
                          user_settings        = space
                          is_bil_invoice       = ls_bil_invoice
                          is_nast              = nast
                          is_repeat            = repeat
     importing document_output_info =
*Uncomented the line to get the spool id or OTF formatted data -
*NY047532
               IMPORTING
                      job_output_info      = w_job
NY047532
                job_output_options   =
               EXCEPTIONS formatting_error     = 1
                          internal_error       = 2
                          send_error           = 3
                          user_canceled        = 4
                          OTHERS               = 5.
      ENDIF.
    ENDIF.
When should be done for the error message not to be shown when the printer name is 'LOCL'.

Hi,
Here my requirement is first the user has to check the nast table if there is any entry with o/p type ZURD and printer 'USJC-PM03' .If there is an entry then an error message 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' has to be displayed.
Then if i close this popup window which is showing error message and change the printer name from 'USJC-PM03' to 'LOCL', and click on execute button,the printer name is not getting changed and still the error message is getting displayed.How to remove this error message?

To change the printer name

Hi,
I have a requirement to change the printer name when the user tries to send the invoice with the same o/p type second time also.How to change the printer name?

We have a field in NAST table which tells us whether the copy is printed for the first time or more then once. Read the value basing on the output type (i.e., Message type in nast table)
Now in your driver program & modify the parameter OPTIONS that are passed to function module OPEN_FORM, goto Option and pass your printer name according to your requirement.
Ex: if <print> = 1.
<printer name> = 'XXX'.
if <print> GT 1.
<printer name> = 'YYY'
Close the thread once your question is answered.
Rgds,
SaiRam

Changing the print order for payroll checks and payroll deposit advices

Hello,
How do you change the print order of payroll checks and deposit advices?
Thanks
RW

Hi there crazytalk,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can i change the print layout in i cal, how can i change the print layout in i cal

Im a franklin planner user and would like to convert to ical. How can I change the print layout in ical so I can print task on the left side and calendar events on the right side.

Hi Mike3232,
I'm afraid that it's not possible to adjust the print layout in iCal. Maybe you should think about changing to another program (BusyCal, etc.) that has the option to print the layout you want?
Good luck!
Michaël Duwyn

Changing the printer for transaction MIGO

Hi,
An output request is created in transaction SP01 whenever the transaction MIGO is executed. I am instructed to change the printer (output device) to a default printer if the storage type is '015'. How can I change the printer (output device) in the output request automatically if storage type is 015? What program will I modify?
Thanks in advance.
Joseph Ian

check Tcode OMJ3.
Printer Determination by Plant/Storage Location
     In this step, you define per plant and storage location the printer from
     which an output type is printed.
     This is only relevant to output types with print parameter 7.
     Example
     In plant 0001 and storage location 0001, the goods receipt slips are to
     be printed from printer LT01.
     For output types WE01, WE02, and WE03, you define the entry
        Plant 0001 Storage location 0001 -> Output device LT01.
     Requirements
     You can only maintain printer determination for output types with print
     parameter 7 (plant/storage location). Check on the detail screen for
     output type whether this is the case.
regards
Prabhu

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

Change sapscript without changing the driver program

Hi! Abapers
is there any way out to modify sapscript for the transaction code ME22N without changing the driver program.
thankx
Amit
TCL

Hi,
Yes you can change the form to your needs and use the text elements available in print program and if any thing which you are needed is not available write performs in your script itself and try to fetch your data. configure your new form in nace transaction.
Thats it..
Reward if find useful

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

HT4356 I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office?

I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

How do I change the printer options on an ipad air?

i am changing service provider. Currently they overlap. My ipad is happy to find the current old provider but cannot find the new provider even when i switch to that network. I cannot find any options for changing printer options. how can I change the printer option to access the new provider? i have 4 weeks to get the answer. Thanks

If you mean that the iPad is tied to another user's iCloud account, you have to ask them to erase the device for you. You can't do it on your own. The device requires their Apple ID and password in order to turn off Find My iPad and to delete the iCloud account.
IF you just want to sign into another Apple ID (not recommended either) go to Settings>iTunes and App store>Apple ID and sign out of that ID and sign into your ID,

Changing the print program

Similar Messages

Maybe you are looking for