Changing the Receiver BI Client No.

Has any one tried changing the BI Client No in the Receiver when using the "initial reduction scenario".
My scenario is this
Sender BI Client 200
Receiver BI Client needs to be 300 .
I have done it with ECC and CRM but never tried for BI.
Let me know if there are any issues with this sort of setup.
Regards
AnoopKrishnan
Edited by: Anoop Raveendran on Jul 30, 2010 12:55 AM

Thanks Guys,
Here is what i did
1) Changed the client in BI through the options in the TDMS initial reduction scenario.
2) After the above mentioned client copy was complete I changed the BWMANDT column in table RSADMINA to point to the new I client created
3) Ran BDLS in the all the BI source systems (to change the BI logical client entry) which were to be connected to the New BI system
4) Ran BDLS in the BI system
a) change the logical system name for the BI system
b) change the logical system name for all the source systems connected to BI (In my case the source systems were also different than what existed in the sender BI system)
5) You might have to restore the BI system as well through RSA1. This is because when we chang the target client all the partner profiles(available in WE20 transaction) and Port Definitions (WE21) were missing in the New BI system.
6) Then Restored the all the source sytem connections through transaction RSA1.
Along with this i did the regular Post-Installation Steps of System Copy and Client Copy.

Similar Messages

How do you change the Received: From in the message header to correct external address

We have trouble every so often sending a message to customers will get a bounce back. Basically it is using our local internal name (mailserver.local) instead of our External name (mail.domain.com). We have a pretty
simple setup one Server (no edge server) with and SSL certificate. I went in to the Hub Transport setting and made sure the FQDN was mail.domain.com and it was. I have read on the subject some people suggest getting your ISP to create a pointer
record for the IP to the internal name. That will not work for us, because we may be changing ISPs in the near future.
I included a bounce and current header info.
So is there a way to change the "Received: from" server name to our external name?
Bounce Message
Generating server: mailserver.local
[email protected] TUK-UTM.theirdomain.com #550 Invalid RDNS entry for 96.43.XX.XX ##
Message headers
Received: from mailserver.local ([::1]) by
mailserver.local ([::1]) with mapi id 14.01.0438.000; Fri, 9 Jan
2015 11:35:19 -0600
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: test1 <[email protected]>
To: test2 <[email protected]>
Subject: test 2
Thread-Topic: test 2
Thread-Index: AdAsMp9XJVDQap4vSC6OcUEejnFNCw==
Date: Fri, 9 Jan 2015 11:35:18 -0600
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: mailserver.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.XX.XX]

The error message states the reverse DNS entry isn't valid. I agree with Willard that setting up an SPF record will help your overall spam score from receiving hosts, but in this case it should simply be resolved by configuring a reverse DNS.
Receiving mail hosts on the Internet usually care most about the IP that's connecting to them. One of the most common tests is the reverse DNS (since the SMTP connection comes from 96.43.X.X, the receiving host will ask itself "does 96.43.X.X really
belong to the TUK-UTM.theirdomain.com ? and will go and check for PTR records for 96.43.X.X) It's this check that's failed.
Even if you'll be changing your ISP in the future, you would still have ownership for your DNS domains, right ? It should be your company paying for this service after all.

I wana change the receiver E-mail address for security answers . How can i ?

I wana change the receiver E-mail address for security answers . How can i ?

Hi Mohammed,
You can change the Rescue email address by logging onto your Apple ID at:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Of course, if you do not know your password, and it is asking you to answer your security questions right now, then you can't do that....
Cheers,
GB

Changing the defauly mail client

Hi,
When I open mail to change the default client, when I go to preferences the menu bar it is grayed out and unclickable.
And when I click cancel on the wizard Mail quits.
How do I the default Mail client if the menu item is unclickable?
Cheers!

You should set up a dummy email account using the setup wizard. Once it checks for email and fails, you should be able to change the preferences.
http://www.wikihow.com/Change-the-Default-Email-Client-on-Mac-OS-X

To change the receiver port name

Hi ,
I am doing a File to IDOC scenario.
We have a requirement to post IDOC flat file to the IDOC in SAP system through PI.
We have Partner Number in control record which we receive in the flat file and that has to be sent to the SAP system which we have achieved by checking the " Apply control record values from payload and take sender from payload" option in the sender communication channel.
But we are having a requirement that the PORT number should be taken from "SNDPOR" segment from the Input file. But when we process the file through PI, the port number changes as "SAP*** ".
Is there any way that i could post the value from "SNDPOR" segment as the port number to the SAP system.
Regards,
Vishal

Hi Vishal,
You can change the port details in Message mapping and use the IDocs adapter with the same option as you have now.
Regards
Suraj

How do I change the default email client from Thunderbird to Gmail in FF 3.6.17?

Using Mac, OS 10.6.7 and Firefox 3.6.17
When I click on an email address link, Thunderbird launches, but I want always to use Gmail. How do I change the email client from Thunderbird to Gmail?

THANK YOU SO MUCH, Tony!
I knew it had to be pretty simple...I just couldn't find the exact location to make the change. Now done. What a relief!!!

Changing the receiver cat in the settlement rule of Product cost collector

Hi,
I have created a Product cost collector using the Transaction - KKF6N. and observed that the settlement rule got created automatically with the CAT - MAT. I need help for below queries.
1. Is it possible to change the settlement rule for the Product cost collector?
2. If yes, Could you please let me know the procedure to do this?
3. If no, what is the alternate as I want to change the CAT from MAT to ORD.
Your help is very much appreciable and Thanks in advance for the help.

Hi,
Check in order type, Which settlement profile is maintained. Then Goto settlement profile maintain receive type which you want to settle.
Regards,
Sreekanth

Changing the Receive Handler

Is it possible to change the the FILE Receive Handler from 32 bit to 64 bit of the running application? Because I receive a File which is extremely large in size, it is taking so many days to receive the File from the receive location. I wanted to change
the FILE adapter with 64 bit receive handler, since it is production I am concerned to stop the application and change the handler. Does it affect the process.

Hello,
All components of BizTalk works on streaming concept. As per your requirement you are not using any internal feature of BizTalk for message processing. Then you have to think for other solution as you are just using custom pipeline for file transfer. If
you are planning to implement any pipeline for handling large file, it is always good to go with streaming concept rather than reading the data.
Yes you will get some performance boost by using 64 bit host, which does have a slight performance overhead. As you are using 64-bit OS and BizTalk it is advisable to use 64-bit host instances for better performance. But there can be limitations with some
adapters and components (like FTP, BAM) and only run on 32-bit, in this case you can go for 32-bit host instance.
You can test the transferring of file using passthourgh pipeline. I think so you will be able to transfer file in hr rather than few day. As you are only transferring the file BizTalk will read only chunk of data at a time. But the only drawback to
it you are going to publish message in BizTalk. And BizTalk is not built for file transfer.
http://social.technet.microsoft.com/wiki/contents/articles/30763.streaming-concept-in-biztalk-part1.aspx

How do you change the Selected Email Client

I have created a form that submits XML data by email.
The first time you click the "Submit by Email" button, a dialogue box opens up and asks you to select one of 3 options: "Desktop Email Application", "Internet Email" or "Other".
The problem that is occurring is that people will either not read the statement or out of ignorance select "Desktop Email Application" when in fact they have internet based email. There is no apparent way to go back and reset this preference.
Does anyone know where this preference is stored and how to change it?
Alternatively, does anyone know how to generate the XML file by an alternate method that could be saved and then attached to an email?
This has been a major problem that has prevented the use of this form, any help would be greatly appreciated.

This setting is handled by your Operating System. On Winddows (Win7) you go to Control Panel->Programs->Default Programs->Set Default Programs. On OS X you set this using the preferences of you email client. For example launch Mail and go to Mail->Preferences->General. The first setting is for default email client.
Hope this helps.
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

How do you change the default email client (Mail) to Outlook when sharing?

In iPhoto I used Outlook as the default email to forward photos to friends. How do you change it from Mail in Photos to Outlook?

I am having the same problem.
Just updated to OS X 10.10.3.
The new Photos app will not link to Microsoft Outlook.
Never had this problem with previous versions of iPhoto.
I have a thread going on this topic:
The new "Photos" will not link to Outlook email.
Apple needs to update Photos 1.0.

Changing the receiving partner in idoc (Outbound SALES ORDER)

Hi All,
In my scenario Sales order (ORDERS) outbound is created and it should send to Delivering plant not to the Sold-to party. how to do this in partner profile? Is there is any coding should be written?
Thank you in advance,
Adithan S.

Hi,
Aveek is right, you only option is to use partner type 'LS'. So you need to create logical systems for these delivering plants, but since setting up 'LS' as the partner function for all the customers requires lots of illogical customizing changes and master data changes, I suggest that you use 'ALE' medium instead of 'EDI'. So that all you need to do is maintain distribution module for any one of these logical system so that output type processing can take place. Later you can use exit 'EXIT_SAPLVEDC_001' to change control record (change recipient to delivery plant).
Cheers,
Sanjeev

What if I'm trying to change the default mail client, and "mailto" is not listed under applications?

"Mailto" is not listed under the applications tab in settings.

See "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions
Delete [http://kb.mozillazine.org/mimeTypes.rdf mimeTypes.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]

Lose Internet connection when I change the SSID

Hi everyone!
well, i bought a WRT160N router, and i have a problem that is annoying me.
I connected the Router to the modem, and all the wired connected PCs were working perfectly.
But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection dropped!
The only way i had to fix this was by making a Hard Reset.
after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
Here you have an image of this:
http://imageshack.us/photo/my-images/41/sinttuloesw.png/
I thought that this was a hardware related problem, and i returned the router for another wrt160n, and the problem persisted.
Also, i have the latest firmware
Any idea?

I thought that a wireless client connects to the named SSID that you designate. If you change the SSID while clients are connected, that would be like the network disappearing as far as the clients are concerned. So you would have to reconnect the clients that were connected to that SSID network. Other wireless network parameters that you change would also cause disconnects, like changing the security, changing the passphrase, etc., you would have to reconnect clients with the new parameters that were connected at the time you made the changes.

How do I change the midi staff style from piano (i.e. bass and treble clef) to a drum score?

Is there a way to change the staff style in Logic Pro 9 from piano to drums?
In the score window I have tried selecting layout then staff styles... then clicking the downward arrow next to piano and changing to drums (but there is no box to select apply changes), I then back out and it still displays and uses a piano score.
Also is there some sort of setting I can apply so that Logic acts with some Logic... i.e. if I'm using a drum audio instrument then the score editor automatically changes to a drum score, similarily with bass and bass clef?

If I understand you write, you are looking for remapping of the incoming MIDI messages.
So your MIDI Drum Kit is connected to your Mac and sends MIDI messages
A few question:
What MIDI Note message is your drum kit sending when you hit the kick drum, or lets ask, what note "should" it send? Record a MIDI Region while playing your kick drum. Open the Piano Roll Editor and look up what MIDI note that is.
Can you change the assignment on your Drum Kit, i.e. set what MIDI note is send by each drum kit peice?
What MIDI Instrument are you using for the drums in GarageBand?
Do you know what MIDI note is assigned to the Snare sound (D1 ?)
A the end it is about matching the sending note (send from the kick drum) to the expected receiving note (assigned to the snare sound). Changin Cable wouldn't do anything. Either you have to change the receiving mapping (hard to do in GB), or change the sending not from the Kick Drum (should be possible).
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

BOM DTW: No field to upload the receiving warehouse in BOM

Hi,
Can we consider in future release the receiving warehouse (header data) during uploading of BOM thru DTW? This is very tedious on the partners/ customer to change the receiving warehouses after the BOM has been uploaded.
Thanks.

Hi
Note 1328706 unfortunately didn't solve my problem :(.
I want to import (add) warehouses (codes: Cl_K and Sev_Adm1) to Item with RecordKey 3
Here is an example
File oItems
RecordKey
1
2
3
File Itemwarehouseinfo
RecordKey     LineNum    WarehouseCode
3                          5               Cl_K
3                          9               Sev_Adm1
Results of Query select * from OWHS
Код склада (Warehouse code)
1   01
5 Cl_K
9 Sev_Adm1
I've tried to put 4 and 8 in Linenum due to Note 1328706 - no effect.
With regards
Maxim

Changing the Receiver BI Client No.

Similar Messages

Maybe you are looking for