Changing the report Length/LINE-ZISE cause printing issues

Hello,
We have changed the LINE-SIZE from 225 to 250 for one of the Z-report. Now some of the printers are causing problem while printing the output. Issue is basically with old printers.
Has any one faced some issues like this? advice.
Thanks a lot.

Hi
I think the SAP Report support standard report length 255 you can define length of report between 1 to 255 that works fine with all kind of printer. But while printing kindly check the printer properties called page format there you can select your suitable page format than try to print it this will solved your proble.
Regards,
Hiren

Similar Messages

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

In the Format panel under the Text Style tab, there is a ▸ Spacing category. Click it to open, and you will have a selector that defaults to Lines, and to the right, the ability to set your spacing in decimal values. In addition to Lines, you also have At Least, Exactly, and Between capability. You can even set exact line height in points. Check that your Before Paragraph, and After Paragraph settings are correct for your needs.

Risks of changing the field length of data structure of a Cluster Table

Hello,
We are on ECC 604 and had implemented HR & Travel Management. Reporting on these applications is done in BI. We use ESS and & Mobile Travel for time, travel expenses, etc and use PCLn clusters.
There is business need to change the length of a field from 20 to 40 for the data structure PTK** of cluster table PCL1.
We are exploring various options to avoid core modifications.
We are also assessing the risks associated with changing the field length.
I am asking you for your opinion about the risks associated with changing the field length of a data structure of cluster table.
Thanks & Regards,
Manoj K Pingali

Recently, we came across the same situation where we had to change the length of a field. Let me explain you what precautions we had taken during that time.
1. Apply the where use list of that table/ Field and check whether it has been used in some program and FM or not. If yes then check one more thing that check the TYPE of another variables on which system has populating data (move, write or in FM parameters). if you will not consider this then you can land you in big trouble. (Conversion dump)
2. Ask the basis to take a dump of the production, quality and data for the safer side if something does not go right.
Now, you can do the changes in your development system and then adjust the database and see the impact of it.
Hopefully, you will not come across any difficult situation in this changes.
Thanks.
Anurag

Change the Report Title for XML Publisher, depending on the field value.

I want to change the Report Title as below.
if the field_A='B' then the report title as it is defined in report defination
else the report title is 'XXX"
Please let me know whether it is possible, if yes please guide me. how can we do it.
Thanks
Venkat

Tim covered the inline if statement, though not specifically regarding a title, in his blog recently:
http://blogs.oracle.com/xmlpublisher/2007/12/18#a723
The syntax is:
xdoxslt:ifelse(.//WM_FLAG='C’,'Canceled','Approved')

How do you change the spacing between lines of text?

using Dreamweaver 6 how do you change the spcing between lines of text. Not seeing it as a option in the page properties menu.

Try CSS line-height property.
Kenneth Kawamoto
[link removed by moderator]

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Question on changing the report template to display the images

I am trying to change the report template so that each table cell will display an image and a checkbox for the image. The column templatet for the new report template is like this:
<td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t17data">
<table>
<tr height="90%"><td>
<img src= "&F101_GET_THUMB.#COLUMN_VALUE#" onmouseover="return onmouseover_img('#COLUMN_VALUE#');">
</td></tr>
<tr height="10%"><td align="center" valign="bottom">
<input type="checkbox" name="f01" value="#COLUMN_VALUE#"/>
</td></tr>
</table>
</td>
My questions are:
1. If the #COLUMN_VALUE# is null, the table cell will display a broken image icon and a checkbox. How could I avoid this? I could add condition to this template, such as when #COLUMN_VALUE# is not null, but how to refer to the value of #COLUMN_VALUE# in pl/sql?
2. I want to always put the checkbox at the center bottom, but no matter what I set "align='center' valign='bottom', it is always close to the image. Since the image sizes are different, the appearance of the checkbox are just up and down. How to fix this?
Thanks,
Fengting

hello,
at designtime the elements from the template are physically
imported into the report. the only way of re-applying a template
is to use the wizard, which will re-default the layout.
regards,
the oracle reports team --pw

How change the report graph color in teststand

how change the report graph color in teststand?

Michael,
You might also be able to customize the style sheet associated with the report. The TestStand Help provides some information about how to customize ATML or XML style sheets to change report colors based on the status of test steps.
Please take a look at the following topics; are these helpful?
ATML Report Style Sheets
Modifying Cell Background Color Based on Step Status in ATML Test Results 5.0 Reports
XML Report Style Sheets
Modifying Cell Background Color Based on Step Status in XML Reports
Tom
TestStand Documentation

Can one change the alignment of Caption field while printing contact sheet?

I'm going to print thousands of photos in contact sheet, and would like to make the caption field left aligned rather than the default of center aligned. Is there a way to change the default alignment in contact sheet print preset?
Thanks.

John is correct, but, you must first select the images and Render Standard-Sized Previews from the Library>Previews menu in Library. Alternatively you can render the 1:1 previews instead, but at contact sheet size, it shouldn't matter too much.

Changing the Default No.of Copies in Print Window

HI All,
How to change the default number of copies while printing in Print POP Up box for Standard Transactions for some specific users.
Regards,
Sudhir

Hi Neeraj,
Thanks very much for the info! Unfortunately, when I get to the "MemberSelectionRowsPerPage" tab, I'm not able to change the default from 20. The "20" appears in blue numbers, and while I am able to modify the field, as soon as I click away from it, or click enter, or click refresh, it reverts back to "20". I've also tried modifying the number, and closing out the screen, but when I go back to the tab to check, it has reverted back to "20".
Is there a way to save this setting that I'm missing? Has anyone else seen this before?
Thanks in advance!
-Jim

How to change the visible length in screen painter?

Hi Guys,
we have field in screen which is type to ATWRT but the visible length is set to 11. ATWRT is 30 char.
Please advise on How to change the visible length in screen painter to make it 30?
When I try to edit the defined length from 11 to 30. It wont allow me to.
Thanks a lot!

Hi,
Try the below method:
Goto Screen Painter -> Double click on Input-Output field for ATWRT another screen will appear with attributes of Input Output field -> Increase the Visible length Value there. (Option of visible length is below the Name and Text attribut of Attribute windiw.)
If the Visible length field isn't allowing change then declare it as a Char type instead of taking the DataType for Data Dictionary.
Thanks,
Preyansh
Edited by: DWIVEDP on Mar 29, 2010 12:42 PM

How to change the hardware address (MAC) of my printer to match my mac

how to change the hardware address (MAC) of my printer to match my mac

Hello @giomarcondes ,
Welcome to the HP Support Forums!
I understand that you wish to alter the MAC address on your HP Deskjet Ink Advantage 3525 e-All-in-One Printer to match the MAC address of your Mac OS X computer. Unfortunately, what you're requesting is not supported. Just to clarify, "a media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment". They are programmed into the device and are not designed to be changed. (Source: MAC address)
Are you experiencing issues configuring your HP Deskjet on your wireless network to communicate with your Mac computer?
If you do actually require support configuring the wifi connection on your printer I would be more than happy to assist you with this. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

Change the maximum length of a field in oracle apps forms.

Hello all. The form which is used is POXPOEPO(purchase order) and the corresponding field is Supplier note(NOTE_TO_VENDOR).
The note_to_vendor field is stored in the table po_headers_all .The length of the field which actually is *480bytes* but if we have to enter more than 480char, what we have to do.
I used the custom.pll and tried to change the property of MAXIMUM_LENGTH using app_item_property2.set_property('PO_HEADERS.NOTE_TO_VENDOR',MAX_LENGTH,500). But there is no such property it seem. Is there a solution to enter more than 480 bytes in the field Supplier note(NOTE_TO_VENDOR).
Thank in advance.

Changing the lenght of the note_to_vendor field in the database or form is not advisable.
You should create a short text attachment at the header or line level.
Oracle seeded PO printing programs print this attachment on the PO /FAX.
This attachment can be much longer.
Hope this helps,
Sandeep Gandhi

Is it possible to change the attributes of lines in Line Charts?

I always think there are no dumb questions but this one actually might qualify because for some reason I'm unable to find a way to change the line color and thickness in Line and Line & Bar Charts. Web Intelligence must be intelligent enough to let me do this, right?
Thnx,
David

Thank you!
So this is again another example of the Web Intelligence product not achieving it's goal, and to me that is simplifying the creation of reports that can turn data into valuable information on which people can make better, more informed decisions. Shame! And I've noticed that this is the case for far more features of Web Intelligence. Please, SAP BusinessObjects, stop including marketing only related functionalities and build a better reporting tool!
As to your answer regarding the palette, this is true but is not a generic solution as this goes for all line graphs (and bar, pie charts?). It is not very user friendly as well!
But thanks for the quick response and confirmation.
I'll keep the post open a little longer to see if anyone else has comments or similar feelings!
David

Changing the report Length/LINE-ZISE cause printing issues

Similar Messages

Maybe you are looking for