Changing the scale of a eprint job

Is it possible to change the setting for the scale of an eprint job?  I need to print something to be 110% to enlarge it for our clients.  Thank you.

Hi there, if you are printing by sending an email attachment to the printers email address its not possible to edit the print settings. If you are printing via the ePrint mobile print app from a smartphone or tablet then you do have the option of adjusting print settings but scaling is not one of them.
Sorry about that.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Similar Messages

  • Can you change the scale of brush resizing?

    Hi there,
    When changing brush size in CS6, I've noticed that it is has granular resolution from 0 pixels up to around 500pixels, incrementing in size very slowly. However, above 500 pixels it increases in size very rapidly, jumping to 800, 1200, 1500 and then into the 2000s.
    As most of the photos that I work on have a high pixel count I find that my ideal brush size is between 400 and 1000, occasionally I use it at around 100 pixels, and occasionally at 2500.
    Is there any way of changing the scale of the brush size so that it allows greater sensitivity in the 400 to 1000 range?
    Cheers!
    Andrew.

    Thanks for pointing out that useful way of changing the brush size. Unfortunately I think it goes too far the other way ie. it changes size too slowly . Instead, the suggestion from conroy (see below) works a lot better as it alters the size in increments of 10.
    Thankyou very much though!
    Andrew.

  • Is it possible to change the scale of graph in webi ?

    Hi All,
    How to change the scale of graph in the web intelligence report.
    Thanks in advance,
    Ravi

    1. Set intervals on Y-axis values of the Webi report Charts from the Webi Chart Properties
    2. Set the Interval of 500 with Y-axis value range 0 2000,such that the value should look like,0,500,1000,1500,2000   
    Reproducing the Issue
    1. Create a Webi report from e-fashion with objects Year and Sales Revenue.
    2. Run the Webi report>Turn to Column Chart.
    3. Go to Chart properties>Y Axis>Scale
    4.Here there are 2 options.
    5. Min value, Max value however the major unit option is not available like one we have in Crystal Reports and Deski
    Environment Details:
    1. BOXIR2, BOXI3.0
    Cause
    This is a limitation in Webi report.
    Resolution
    Enhancement_Request ADAPT01202508 for this issue has been raised however there is no specific timeline as of now defined about which major release this feature will be included in.
    Regards,
    Sarbhjeet Kaur

  • How can I change the scale of a dimensionline?

    I want to change the scale of a dimensionline? Now is it 1:1. How can I change this in Acrobat standard 9?
    Thanks

    paulkreuzer wrote:
    Ok now I can change the tempo, but when I do I change all loops at once. What I want is to change the tempi of all loops seperately, how do I do that?
    You could mess around a little bit with "Flex Edit" (go to the GB help menu and search for flex edit to learn how) and see if that helps, but as Hangtime said, GB doesn't really support that... yet.
    One application that might help is Amazing Slow Downer. You could use it to speed up or slow down material before bringing it into GB:
    http://www.ronimusic.com/

  • Error message while changing the delimit date of a job in ppome

    Hi experts,
    I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
    Pls help...

    Dear Priaynka,
    Thanx for ur reply, I am again furnishing below the details:-
    I have to change the Valuation Class of the material :-
    7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
    1 PO for which Goods Receipt & Invoice Receipt have not been made.
    All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
    Should I change the valuation class by deleting the line item of all the PO's  7 POs + 1 PO.
    Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
    Please advise if I am wrong in the procedure.
    Regards,
    Alok

  • Change the routing assigned to a job by program

    Is there an API, or any procedure which allow to change by program the routing of a WIP job (validate the changes and replace the primary routing which imply replace the old operations and resources by the alternate routing resources and operation, and reschedule the job) ?
    The purpose is to Mass change the routings on jobs (for example: change the routing of all the unreleased jo of an item category).
    Thanks in advance.

    You have to:
    - eliminate the stock of that material/batch
    - mark the batch master with deletion flag
    - archive the batch master
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/eb/650362e5a511d285ed0000e82013e8/frameset.htm
    After archiving you should be alble to do a GR with same batch number for another material...hopefully...
    Edited by: Csaba Szommer on Jul 19, 2010 8:31 AM

  • How to change the user for an event job as SAP_MONITORING_STARTUP_DISPATCH

    Hi experts!
    We change the user that execute all our jobs. I can change the user JOB-BW for JOB-BI for this job SAP_CCMS_MONI_BATCH_STARTUP_DP, but the problem is when this job is executed by event for this other job SAP_MONITORING_STARTUP_DISPATCH, but i can't change the user JOB-BW for JOB-BI for this event
    Could you tell me, how i do the change user for this job.
    Best Regards
    Ramon Sanchez

    Hi!
    My problem have been solved. The job SAP_CCMS_MONI_BATCH_STARTUP_DP is automatically created by
    Job SAP_CCMS_MONI_BATCH_DP. It is an event triggered job to handle the startup-methods which are to be processed in batch.
    The event is SAP_MONITORING_STARTUP_DISPATCH; I only select the job in SM37 and specify this event and after made the search the job  SAP_CCMS_MONI_BATCH_STARTUP_DP i only change the user.
    Thank you all for your help!
    Ramon Sanchez

  • Automatically changing the scale

    hi need help , i have done a graph where the Y scale index0 and Y scale index1 is using the same range of data wen plotiing.
    wen user run the vi..let say i change the Yscale in index0 how to change the Y scale index 1 automatically?
    thk u

    Hi jeyanthi,
    resize the property node and select increment.
    Mike
    Attachments:
    YScale_LV80.vi ‏16 KB

  • How to change the scale of magnitude in polar plot?

    I use a polarplot-subVI in my application. The usual labels of magnitude scale is devided in steps of 90° (e.g.:0°,90°,180°,360°). How can i increase the number of magnitude labels. When i go into the "pg angle labels.vi" i only found a way to change the content of the labels and not the number. Can someone help me?

    Greetings!
    If you wire in a "polar Attributes" cluster control, you can fiddle with the scales. Alternatively, you can "drill" down through the main vi, and see that the grid is controlled by a "picture plot" subvi. If you are not faint of heart, you can manupulate the grid properties at a lower level, but for the time being, I think the Polar Attributes control should do the trick.
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705

  • Prevent cursor from changing the scale

    There seems to be a difference in how the cursor affects the scales on XY-plots in LabVIEW 8.5 vs. 7.1.1: if a cursor is snapped to a plot and you move the cursor to a point that is outside the current scale it will change the Y scale. In my case the plot values go up and down all the time and off scale...but I want to be able to move the cursor sideways without any change on the scale.
    One way to solve it is to turn off the cursor scrolling, however the problem then is that I really want to be able to scroll sideways with the cursors, I just do not want the cursors to automatically scroll while they track the plot they are snapped to. This was possible in 7.1.1 - even though you had cursor scrolling on the Y scale would not change like this unless you grabbed the cursor point yourself and dragged it along the Y scale. The way it works in LV 8.5 makes horisontal scrolling a nightmare because LV automatically starts adjusting the Y scale as well.
    Now there has been a few changes to the cursor and plot properties since 7.1.1 so perhaps it is possible to get back the behaviour from 7.1.1 (i.e. scrolling ON - but with no automatic scrolling along the Y axis as you scroll along X) ?
    Ideally in this case I would prevent scrolling along the Y axis alltogether (not even manually by dragging the cursor vertically), but allow it along the X axis...that feature is probably one for the wish list though...(?).
    MTO

    Hi Wiebe,
    The change in behaviour is there, no doubt about that. It's not the easiest thing to recreate though (same plot and cursor and scale settings, a suitable plot, same cursor movement etc.), and to get around it is simple enough, but it is always annoying (and risky) when the default behaviour is changed...
    I did not use the scale change, but made my own scrolling function based on the cursor move event. I've turned off the cursor scrolling option to avoid the Y-rescaling, and change the X-scale range if a cursor is moved off scale.
    MTO

  • Is there a way to change the Recurring Schedule of timer job Expiration Policy in SP online ?

    I'm using SharePoint Online. I want to run a rule every day on the items of a list.
    To do this, I went into Information management policy settings
    of my list and enabled Retention. There, I added a daily event and set the
    Recurrence to 1 day.
    After 24 hours, nothing occurs.
    I guess the default schedule for the Information management policy
    and the Expiration policy timer jobs are set to 1 week (as is the case for 2010 and 2013 on premise versions) but I'll have to wait a couple of weeks to be sure.
    Does anyone know how to change this setting ? any workaround ?
    Thanks !

    Nope, none i can think of. We have no control over that level of behaviour within SharePoint and have to accept the MS standard offering.

  • How do I change the scale value ratios in Lion?

    If I use a larger monitor and want to scale down all the windows by 50%, how would I change this setting in Lion? I have plenty of desktop space with a larger monitor, but this does not really seem to help at all because all the windows are still taking up as much of the screen. When I manually drag the window smaller, the letters are still larger and require scrolling to read. When I press Command (- ), the text gets jumbled together and is not viewed as the screen should be. I would like to know how to just adjust the settings to scale everything down by 50%. I have tried typing some stuff into the terminal which I found via Google, but they do not seem to work on Lion. I would like to just have more desktop space and keep everything scaled down like on the larger iMacs. Thanks in advance for the help.

    Found it!
    Make sure you have multiple desktops already running.
    Go to System Preferences->Keyboard
    Choose Keyboard Shortcuts
    On the left select Mission Control.  On the right, I have "Switch to Desktop 1, Switch to Desktop 2, etc"
    On my iMac they were checked, and working.
    On my MacBook they were unchecked.  Checked the boxes, now it works.

  • Change the printer code for eprint services

    I need to change printer code for eprint services

    Is it not accepting the printer code that printed out on the information page? Is it giving an error message at the website when you enter  that code?  If that code is over 24 hours old the site will not accept that code.  You would just have to reprint the info page again from the web services icon on the display screen. For most printers, that icon is in the top left corner and looks like a piece of paper with a target behind it, generally speaking.  The code, 90% of the time, will not change and will be the same.  The page just has to be reprinted as the 24 hour time limit is a security measure.  If you need further assistance beyond this please let me know what printer model you have and the model of router you use in your wireless setup.  If you need assistance finding your product number so that the exact model of printer can be pinpointed, look at this link here. It shows how to locate that number for any HP product that you may own. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • When I print a page from the internet it only prints a partial page. I have tried print to fit, it still does not print the whole page. I change the scale to 40% but the print was so small that I could not read it.

    How can I print the document on two or more pages?

    Hi,
    The HP ePrint does not support web pages printing
    Printing Web pages through email is currently not supported. HP is in the process of developing solutions to support Web page printing for mobile devices.
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02881579&cc=us&dlc=en&lc=en&product=5058336#N91...
    You may print web pages using the HP ePrint Home & Biz app by using its integrated web browser:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218#N58...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Changing the scale on graphs?

    I've got a graph that'll always be whole numbers, so 3.25 doesn't do me much good...
    is there anyway to force a whole # count?
    TIA

    Select the graph then Inspector. Set your scale intervals (Value Axis Steps).
    Before:
    After:
    Regards,

Maybe you are looking for