Changing the Scan rate/Display resolution on Insignia 55 LCD

We just bought a Insignia NS-55l780A12, the 55" LCD model. Looks like they entered 1080i during the initial setup. How do we go back to set it as 1080p?
Thanks
Solved!
Go to Solution.

Glad it worked out for ya. Come back if you need anything else.
Disclosure: Former BBY employee.

Similar Messages

Keithley 2701 LV driver: Setting the scan rate?

I downloaded the Keithley 2701 LV driver and the example programs work great. There is just one question that I have. I cannot find anywhere in the examples or in the LV drivers how to change the scan rate or scan interval. Everything else I'm able to change, such as number of points, channels, voltage levels, etc., but I can't figure out how to change my scan rate to once every 0.5 seconds or 1 second.
I'm not sure, maybe this is a question for Keithley but since it is a LV driver I decided to post here first.
I'm using LV8.2
Jeff

I am using the Keithley 2700 with the 7700 cards. There is a vi named "ke27xx Configure Aperture Timing.vi" in the "ke27xx.llb" .
The vi sets the integration time for the A/D converter. I was measuring 500uv and needed to improve my accuracy so increased my integration time.
Brian
LV 8.2
Brian

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

Is it possible to change the frame rate of a motion template?

Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
If not in Motion, how else could this been changed?

Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

User exit/BADI for changing the exchage rate type in MIGO

Dear guru's,
Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
Regards,
Abdul Rahim

did you check this one MB_GOODSMOVEMENT?
also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO.

How to change the pricing rate of Sales Order after delivery is created?

Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders" after corresponding delivery is created ?
number of the Sales Order to be changed is huge. How can I handle this situation ?
immediate replies would be rewarded

Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

How do you change the frame rate (or fmp) of a project once you have already started?

I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
thanks

Hi,
I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI

How do I change the size of display on my desktop?

How do I change the size of display on my desktop?

Where the apple sign and than safsir file view history bookmards window help etc to make smaller

Change the exchange rate of a line item manually

My company has an issue regarding the exchange rates. We are in a country using EURO.
Though from one of our vendor we take prices in USD. In our pricing procedure in the sales orders we post the price of the vendor and in the prices we maintain another condition type for our profit.
In the case of the vendor price that gives us USD, we have want to give the price in the usd and the system to translate the usd in eur (in the next line of the procing procedure) accourding to an exchange rate that the user will give per line item.
At the moment the system thanslates the price to eur accourding to the exchange rate from the system (automatically) and I haven't have the possibility to change the predifined exchange rate manually as I want to do.

Hi,
Exchange rate are maintained in the T.Code "OB08".
Goto the T.Code "OB08".
Change the exchange rate as per your requirement.
If you want to get different currency then goto the T.Code "XD02".
Enter your customer number,Company code and sales area.
Goto Sales area data.Sales tab.
Change the currency to your value as per your requirement.
If you create a new order with that customer,then we will get this new currency.
After creating the invoice,pass the accounting document number into "FB03" and enter the company code and fiscal year.
Enter.
Click on "Currency".
It gives you the value in base currency.
Regards,
Krishna.

HOW DO I ACHIEVE A TIME STAMP, IN THE FIRST COLUMN OF MY SPREADSHEET IN EXCEL,SHOWING THE TIME INTERVAL, INCREASED BY THE SCAN RATE ?

FROM AI START VI TO FORMAT AND APPEND VI TO CONCATENATE STRINGS,SECOND INPUT IS TAB,THEN EVEY OTHER ONE IS TAB. THIRD AND FIFTH INPUT IS ATTACHED TO GET DATE/ TIME VI, THEN END OF LINE, THEN CHANNEL 0; TAB; CHANNEL 1;TAB, AND SO ON THROUGH CHANNEL 7. THEN THE LAST INPUT IS END OF LINE. ON THE SPREADSHEET I RECIEVE THE SCAN RATE, THEN THE DATE ,THEN THE TIME; ALL ON THE FIRST ROW. THE NEXT ROW HAS THE COLUMN LABLES, AND DATA GOES TO THE CORRECT COLUMN. BUT NO TIME STAMP COLUMN. I WOULD LIKE IT TO BE IN COLUMN "A" EVEN WITH THE FIRST ROW OF DATA. EX." 10:01:01 200 300 400
10:01:03 200 300 400
THANK YOU
FOR YOUR HELP, JOE BOB CRAIN

I think the best way is to generate an array of time values to send to your spreadsheet BEFORE channel 0 data.
To generate the array you can use Ramp Pattern.vi from 0 to 'Actual Scan Rate' (from AI Start) * number of scans performed.
That way in your spreadsheet you will have the first line same as now, next the columns with time(secs), channel 0, channel 1... channel 7.
If you need the time column with date and time string, you can use Get Date/Time in Seconds.vi when you begin acquisition, then sum the seconds obtained to the array calculated as above and next use Format Date/Time String.vi to obtain the time stamp you need, next build array of time stamps and sent to your spreadsheet.
Hope this helps
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

No problems here with the H1 headers.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

How can I change the sample rate (delta X)?

Hi, I create vi which can measure resistance, it will record the data and write to a file.
however, I want to change the sample rate which is delta x. is that anyway I can do?
I have try to put a clock inside the loop, it does slow down the speed but not the sampling rate.
Please help me!!
Thank you!

Hello Shan405,
Adjusting the Reading Rate of a DMM
As noted in the above DeveloperZone article, there are a lot of factors contributing to a reading rate of a DMM. 'Sampling rate' can only be configured in digitizer mode, which can only be achieved on the flex DMMs
Using the NI PXI-407x DMM as an Isolated Digitizer
Regards,
Glenn

How do I change the bit rate for dls?? How times can I download one song??

I'm new to iTunes. I already downloaded 3 songs when I realized that the default bit rate is 128Kbps. I tried changing the bit rate to 192Kbps with a (Variable Bit Rate) checked.....unfortunately when I downloaded the next 2 songs the bit rate turned out to be the same.
Do I have to restart Windows or iTunes before downloading again?
And now that I have 5 songs with a lower br than I wanted... in order for me to have(download) the song at the higher bit rate...Is it possible to download one song more than once?
Thanx.

You have no choice as to bit rate when purchasing from the iTunes Music Store. The official bit rate of all tracks there is 128 kbps (a very few have been reported to be at higher rates, but that's not a choice you can make, it's how the track was encoded by the record company). The setting in the iTunes Importing preference is for tracks you import from CDs only and has no effect on iTMS purchases.
Is it possible to download one song more than once?
No. Except in extraordinary circumstances, the iTMS allows only one download per purchase.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic before you post a question.
Regards.

How can you add/change the currency rate in spro?

Hi all,
you can add a new currency code by going to spro --- general settings --- check currency codes
for example: PERU ---> PEN
But, how can we add/change the currency rate PEN in spro?
for example: Peruvian Nuevo Sol = 4,3567619
Is it still in customizing? And if so, where can i find it?
Many thanks in advance.
Kind regards,
Pamela.

Hi Aman,
I have entered the field to add the new currency rate.
But the system doesn't want to valid my new rate.
I get the following error message:
"Input should be in the form ._,____ "
Do you know how to override that command?
Thanks.
Regards,
Pamela

Changing the Scan rate/Display resolution on Insignia 55 LCD

Similar Messages

Maybe you are looking for