Changing the server name and IP of an instance
I am moving QAS to another partition. I did a full system backup and restore to the new partition name and IP. QAS will not start on the new partion. What is the simplest way of migrating this instance into the new partion with a different name and IP? Do I need to reinstall or can I change the profiles so that it will start up.
That worked and the create system ran... but, I get this error as I deleted the profiles and the trans config
Program XDNCONTROL in library *LIBL not found.
Error found on CALL command.
Environment variable added.
Job 001402/QASOFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
O4STRSAP: Could not retrieve instance/system configuration for instance 02
of system QAS on host PPAK0055 from directory
"/usr/sap/trans/config/QAS".
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
O4STRSAP: Starting instance 02 of system QAS on host PPAK0055 is not
possible. System configuration can not be retrieved.
Errors occurred in command.
Bottom
Similar Messages
-
"Is it possible to hide/remove/change the server name/type and
Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?
Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki -
Is it possible to change the font name and size without having to compile?
Dear All
We have one requirement that we need to change the font name and font size at run time dynamically without having to compile all the forms in 6i.
Is there any way or work around to achieve the same.Kindly suggest us.
something like using uifont.ali or forms60_defaultfont, or set_item_property
Thanks and Regards
Thangaraj.Dear All,
Thanks for your updates, Technically what both of you said is correct. but in application server we used something like ClientDPI to match the client server font with the application server, i need to know that is there anyother way something like this...?
I have read one document(Note:28397.1 in metalink) saying that using uifont.ali file we can change the font at run time, but i have used this only for report
Thanks and Regards
Thangaraj.S -
Lumira Login Error "Check the Server Name and Instance ID"
Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectifyI wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place -
I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??
See #5
Step by Step to fix your Mac -
Is it advisable to change the hub name and or pass...
My BT Broadband was activated yesterday - HH 4
Is it advisable to change the hub name and or passwords issued by BT or is it OK to stay with the BT default name and passwords.
Solved!
Go to Solution.If you found this post helpful, please click on the star on the left
If not, I'll try again -
How can I change the "folio name" and the "publication name?
Hello,
We have posted a Multi-folio App a single folio in it.
We would like change the "folio name" and the "publication name” and we tried to do this using the dashboard. However, when clicking “update” we unchecked the “update content” checkbox, because there are no changes to the folio’s content. The problem is that this didn’t change anything in the app: both the "folio name" and the "publication name” remain unchanged…
Is it possible to do this without having to repost this folio?
Thanks!
Olivier.The metadata is considered part of the content. Click update again and leave the "update content" checkbox checked.
Neil -
How do i change the administrator name and password when i forgot both of them
how do i change the administrator name and password when i forgot both of them?
Find the user name and then reset the password.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Note down the user account name.
Enter a new password.
Reenter the new password for the user.
Note it down.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
How do I change the admin name and password on my iMac?
How do I change the admin name and password on my iMac? It's been about two years since I've done that and I've totally forgotten how to. Your help is appreciated!
Hi Haldane, and a warm welcome to the forums!
Changing the name can be dangerous, use ChangeShortName 10.4 only...
http://www.macupdate.com/info.php/id/16620
Many way to change the PW then, the Accounts Pref Pane, unlock the Lock, click on change Password. -
How do I change the administrator name and password?
I am trying to put some needed applications on my G3 Lombards and it won't let me because the previous administrator of the computer failed to erase all of his info before I bought it.
How do I change the administrator name and password?
This is the most ridiculous thing I have ever seen yet.
Please help. FAST
Edited by an Apple Discussions HostRobert:
May I strongly urge you to get a set of installer CDs. They will come in handy as you need them for much more than just installing the OS. From time to time, e.g. you may need to boot from the installer disk to Repair Disk (you can Repair Disk Permissions from Disk Utility on the HDD, but to Repair Disk, you must boot from a different volume). And if you had installer CDs changing the password and creating a new Admin Account would be a breeze.
You can get universal installer disks at applerescue. Another option in your situation is to do a complete re-install. That will not only enable you to create your own admin account, but it will automatically change the computer short name. However, for that you need installer disks.
Meanwhile, <a href=""http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0>here is another article that should help.
Good luck.
cornelius
Message was edited by: cornelius -
Changing the server name on package connection string.
I have a connection string in a package which is a local connection string and not in project connection manager and isn't parameterize as well. Now I need to change a server name of the connection property without using editor. Can I do that and how ?
Moyz KhanI agree about using configuration for connection string but unfortunately this is an inherited project/packages . And my task it to make these run as currently I don't have luxury to modified it.
So I was able to change most of the connection string with below update
update[SSISDB].[internal].[execution_parameter_values]
setparameter_value=replace(cast(parameter_valueasvarchar),'OldServer',NEwServer)
update[SSISDB].[internal].[object_parameters]
set[design_default_value]=
replace(
cast([design_default_value]asvarchar(1000)),'OldServer','NEwServer')
Now the only one its complaining is the Project connection string . If I know where to look and update that I might be able to run these packages .
Moyz Khan -
I changed the Computer Name and i can not run EM.
I had to change the computer name in order to connect to the intranet.
I updated the listener.ora and tnsnames.ora with the new computer name.
I can run SqlPlus but i can not run EM on http://tahirpc.isu.intranet:1158/em *
I checked Services and I saw that OracleDBConsoleorcl service do not work. I get error code:2 when i try to run it manually.
What should i do?
New computer name: tahirpc.isu.intranet
Old computer name: mtkeskin.isu.intranet
OS: Win 7
Oracle: 10.2.3
------------------------Thank you Jean-Valentin . I tried those but unfortunately this did not work.
Here is what i did on CMD:
RECREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS RECREATE
STARTED EMCA at 28.Oca.2010 11:28:43
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user: l
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:29:07 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-28-42-AM.log.
28.Oca.2010 11:29:24 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:32:09 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
28.Oca.2010 11:32:10 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 11:37:14 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 11:37:34 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 11:37:34 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-28-42-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-28-42-AM.log for more deta
ils.
DROP
C:\Users\mtkeskin>EMCA -DECONFIG DBCONTROL DB -REPOS DROP
STARTED EMCA at 28.Oca.2010 11:47:57
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:48:13 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-47-56-AM.log.
28.Oca.2010 11:48:17 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
28.Oca.2010 11:48:18 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:50:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 28.Oca.2010 11:50:35
CREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS CREATE
STARTED EMCA at 28.Oca.2010 11:54:55
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:55:19 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-54-55-AM.log.
28.Oca.2010 11:55:32 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 12:00:13 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 12:00:27 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 12:00:27 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-54-55-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-54-55-AM.log for more deta
ils.
I checked log files but i did not understand anything of 'em :(
Edited by: NaKKaSh.TR on 28.Oca.2010 12:12
Edited by: NaKKaSh.TR on 28.Oca.2010 12:14 -
OEM is not getting started after changing the Server name
Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-NaveenHi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric -
How do I properly change the server name in mountain lion server?
I need to change my server name to a FQDN, but tried this with Lion server in the past without success. I know in lion you'd use server app, but that's no longer avaiable in mountain lion server and I want to make sure I get this right the first time.
Thanks!I was able to get everything working with some assistance from Apple's enterprise support. After changing the host name, the DNS was still not resolving properly and I couldn't turn on open directory so that I'd be able to start profile manager. The DNS interface is considerably different than that in previous versions of server. The network was set to manual ip with dhcp, which was pulling back an external IP. Overriding the DNS info coming in via the dhcp, setting it to localhost, resolved the issue.
Thanks! -
Hi,
We have our sandbox system in the solution manager and configurations done. Recently we have changed the hostname of the sandbox system viz., xy00yz01 to ab00bc0...now coming to the question...can I change the sandbox hostname in the solution manager so that the pre-existing configuration settings work? Does this work or Is there any alternative?
Thanks and Regards,
Damanaidu JHi,
My question was not to change the name of a host server as such...say i have a server with name xy00yz01 and i have changed it to ab00bc01...i have done configuration settings for my satelite system with name xy00yz01in solution manager...now those settings can't be detected by the solution manager as the host name of my satelite system is now ab00bc01...so my question is whether I can change the host name of the satellite system to ab00bc01 from the solution manager setup so that I can all the configuration settings detected.
Thanks and Regards,
Damanaidu J
Maybe you are looking for
-
Hello, At the moment I am using SAP Business One 8.81 with Inventory Pro add on We are looking to change to 9.1 which has no Inventory Pro as I am told If we have issues with Items stuck in SYS_Bin and REC_Bin and when you Goods Receipt Items with Se
-
How to create a metric in BOXI R3 performance Management
Hi All, Can any one tell me how to create a metric (goals and calendar) in BOXI R3. In BOXI R2 there is a separate module where we can create metrics, golas and calendar... Is there any separate module like that in BOXI R3 or not. When I logged into
-
TS1292 there is no pin on my itunes giftcard and the giftcard number is invalid
I am trying to redeem an iTunes Gift Card from 2009. It has a 16 digit number beginning with X and a serial number beginning with GCA. There is no pin number on the card. How do I redeem this card or even check to see if it was activated?
-
Running catproc.sql and catalog.sql scripts
hi there, what is the need to run catproc.sql and catalog.sql scripts after creating the database manually? please write me the answer. thanks in advance.
-
I want a clip to progressively slow down as the clip ends, I also want it to start slowing down from a point at which i can choose, Anyways I can do this? Basically Im a new user to Adobe Premiere Pro as it is much better than Sony Vegas and I'm jus