Changing the shades of color dynamically

Hello,
I want to drag and drop each pill into the mouth (lip_mc)
that works fine. I want to
1) make each pill disappear as soon as it touches the lip_mc
2) change the tone of the lip_mc gradually to a darker shade
(red), and this occurs by the subsequent pill that is dragged into
the mouth.
The above dont work. I have been able to transform the color
once only by dragging the pill into the mouth.
But I want this to happen continiuously by each hitTest of
pill and lip_mc
Please advise, I have attached my codes.
Thanks

Similar Messages

Changing the shades of color

I would like to change the "shades" of a MC, not the color by
bringing another MC_2 n contact with it.
Say I have ten MC_2, and I can choose any one to execute a
hitTest with the MC so that the latter changes it shade gradually.
Pleae advise.
Thanks
Uxk

I would like to change the "shades" of a MC, not the color by
bringing another MC_2 n contact with it.
Say I have ten MC_2, and I can choose any one to execute a
hitTest with the MC so that the latter changes it shade gradually.
Pleae advise.
Thanks
Uxk

How do I change the default window color?

Having white screens is too bright for my eyes!! I always change the default window color in Windows (hiss hiss) to a light shade of gray and that setting carries thru to all windows (i.e. Word, Excel, notepad....). Is it possible to do a similar thing with Tiger? I see that I can choose between a couple of "schemes" from a "Desktop and Dashboard Settings" area (or similar - i don't have my mac here now so can't look to see the proper name) but I see no way to alter colors within those schemes. If you can tell me how to change the default color for my windows I will be awfully happy. thanks.

Personally, I wouldn't trust it, and I don't hesitate to try these things most of the time even though they sometimes cause problems. But I've used Unsanity products before and they all require installing a preference pane called APE; Application Enhancement module, and that thing caused me lots of problems for my system, lots of crashes and flakiness. I won't use it again.
But I'm sure there are lots of people using it happily, but if you don't feel confident in dealing with system problems stay away from anything that adds a system preference pane or goes up in the top menu bar at the top (Apple icons excepted) or has to start up with the system.

Problem while changing the JSplitpane in a dynamic way.

Hi Everyone,
In my application i'm changing the jsplitpane in a dynamic way.i'm posting the sample code thatz giving problem.Kindly compile and execute this.In the first frame i've done a split of two parts. The top component has got the name of the application and the bottom component has got some links related to that application. If the user click on this link ,i'm capturing the bottom component alone from the original splitpane and i'm breaking that into another split.
upto this every thing works fine.Now the problem is when ever the user click on that link it'z capturing that event and doing consecutive split on the bottom frame.But i need that paricular split that user has already got to be repainted for all the time when user click on the link.Eventhough i've captured the main splitpane object in some other variable and assiging the same to the second window when user click on that url.But itz not recognizing that.
Kindly some one help me to resolve this.
import java.awt.Color;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.GridBagLayout;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.util.Vector;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JSplitPane;
public class Test2 extends JPanel // implements KeyListener
    static Vector<String> arrAppName = new Vector<String>();
    public static JSplitPane splitPane,splitPane2;
    public void AppWin(final JFrame frame)
        Container contentPane = this;
        GridBagLayout gb = new GridBagLayout();
        contentPane.setLayout(gb);
        arrAppName.add("link");
        JLabel lab = new JLabel("<html><font color=#6698FF><a href>" + arrAppName.get(0) + "</a></font></html>");
        contentPane.add(lab);
        JScrollPane listScrollPane = new JScrollPane(contentPane);
        JLabel label = new JLabel("APPLICATION REPORT", JLabel.CENTER);
        Font font = label.getFont();
        Font font3 = font.deriveFont(25.0f);
        label.setFont(font3);
        label.setFont(label.getFont().deriveFont(Font.ITALIC));
        label.setHorizontalAlignment(JLabel.CENTER);
        label.setForeground(new Color(0x736AFF));
        JScrollPane labelScrollPane = new JScrollPane(label);
        labelScrollPane.setVisible(true);
        // Create a split pane with the two scroll panes in it.
        splitPane = new JSplitPane(JSplitPane.VERTICAL_SPLIT);
        splitPane.setTopComponent(labelScrollPane);
        splitPane.setBottomComponent(listScrollPane);
        splitPane.setDividerLocation(100);
        Dimension minimumSize = new Dimension(100, 50);
        listScrollPane.setMinimumSize(minimumSize);
        labelScrollPane.setMinimumSize(minimumSize);
          splitPane2= new JSplitPane();
          splitPane2=splitPane;
        lab.addMouseListener(new MouseListener()
            public void mouseClicked(MouseEvent arg0)
                displayMainFrame("link", frame);
            public void mousePressed(MouseEvent arg0)
            public void mouseReleased(MouseEvent arg0)
            public void mouseEntered(MouseEvent arg0)
            public void mouseExited(MouseEvent arg0)
    public void buildWindow(String link, JFrame frame)
        Container contentPane = this;
        GridBagLayout gb = new GridBagLayout();
        contentPane.setLayout(gb);
        JLabel label = new JLabel("Next Screen", JLabel.CENTER);
        Font font = label.getFont();
        Font font3 = font.deriveFont(25.0f);
        label.setFont(font3);
        label.setFont(label.getFont().deriveFont(Font.ITALIC));
        label.setHorizontalAlignment(JLabel.CENTER);
        label.setForeground(new Color(0x736AFF));
        JScrollPane buildWindowtop = new JScrollPane(label);
        buildWindowtop.setVisible(true);
        contentPane.add(buildWindowtop);
       /*assigning the main split pane object for all the consecutive call*/
        splitPane=splitPane2;
        JSplitPane splitPane1 = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
        splitPane1.setTopComponent(splitPane.getBottomComponent());
        splitPane1.setBottomComponent(contentPane);
        splitPane.setBottomComponent(splitPane1);
        splitPane.setOneTouchExpandable(true);
        splitPane.setDividerLocation(100);
        Dimension minimumSize = new Dimension(100, 50);
        buildWindowtop.setMinimumSize(minimumSize);
        splitPane1.setMinimumSize(minimumSize);
    } // end printing rows
    public static void displayFrame(String tname, JFrame framedisp, String buttonName, String tranCorrID,
        String buttonOption, JSplitPane buildSplit)
        Test2 mainDispPane = new Test2();
        framedisp.getContentPane().add(splitPane);
        framedisp.setVisible(true);
    public static void displayMainFrame(String link, JFrame framedisp)
        Test2 mainDispPane = new Test2();
        mainDispPane.buildWindow(link, framedisp);
        framedisp.getContentPane().add(splitPane);
        framedisp.setVisible(true);
    public static void main(String[] args)
        JFrame frame = new JFrame("MAIN WINDOW");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Test2 mainPane = new Test2();
        mainPane.AppWin(frame);
        frame.getContentPane().add(splitPane);
        frame.setSize(1280, 1000);
        frame.setVisible(true);
    } // end main
} // end Test2Thanks in Advance,
Siva.

anybody can help me this regard?

How can I change the font and color of an email signature?

How can i change the font and color of an email signature?

Mail > Preferences > Signature
Highlight the Signature.
Click Format in the menu bar and select " Show Fonts".
Select the Font.
Highlight the Text.
Click Format in the menu bar and select " Show Colors".
Select the color.
Mail > Preferences > Composing > Message Format: Rich Text
Best.

How to change the text of label dynamically

Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!

Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak.

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

Highlite the text inside the text box and then press Ctrl+E.

How do I change the tab background color in Firefox 4?

I just upgraded to Firefox 4. Tabs are now fine black font on dark grey background -- very hard to read. How do I change the tab background color?
I have searched and the closest I can come is some instructions for modifying .css files, and it is not clear that those instructions will impact the tab background color.
Thanks in advance for your help.

Similar question asked by TH received another response.
Here is the address of that question and answer:
https://support.mozilla.com/en-US/questions/804464?s=change+tab+color+firefox+4&as=s
I like the solution recommended there.
Added information - after several days experience, I notice that some tabs occasionally revert to the original dark grey. So I am still looking for a better solution, ideally within Firefox rather than via add on. This seems like a basic setting for the browser that should be easy to change, rather than something so complex that I need an add on to change it. Or just build it without such a dark grey background to begin with and I would not need to change it.

How do I change the workspace background color?

Hi all,
I need to change the workspace background color from the
default mid grey. But I can't find how to do this!
Any ideas!
Thanks in advance, Pedro.

Sorry, but there's no way to change it from the default gray.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

How to change the text in JTextField Dynamically

i am trying to change the contents of JTextField dynamically like this
textfield.setText();but it is giving error...........how can i do it....

here is the code .....it is showing error in line 18 and 20 as identifier expected
their i am trying to make JTextField editable....
plz have a look
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import javax.swing.filechooser.*;
import javax.swing.SwingUtilities.*;
import javax.swing.filechooser.FileFilter;
//import javax.swing.JEditorPane;
import java.net.URL;
public class tm extends JFrame implements ActionListener
public JTextField[] programtext = new JTextField[30];
public JTextField[] tapetext = new JTextField[30];
tapetext.setEditable(true);
public JTextField[] statetext = new JTextField[30];
statetext.setEditable(true);
int count =0;
public static void main (String arg[]){
tm m=new tm();
m.setSize(1000,500);
m.show();
JButton loadp, run, step,loadi,loads;
public tm()
Container c ;
c = getContentPane();
c.setLayout(new FlowLayout());
loadi = new JButton("LOAD INPUT STRING");
c.add(loadi);
loadi.addActionListener(this);
loadi.setBounds(200,25,100,50);
loadp = new JButton("LOAD PROGRAM");
c.add(loadp);
loadp.addActionListener(this);
loadp.setBounds(300,25,100,50);
run = new JButton("RUN");
c.add(run);
run.addActionListener (this);
run.setBounds(400,25,100,50);
step = new JButton("STEP");
c.add(step);
step.addActionListener(this);
step.setBounds(500,25,100,50);
loads = new JButton("LOAD STATES");
c.add(loads);
loads.addActionListener(this);
loads.setBounds(600,25,100,50);
JPanel prog = new JPanel();
prog.setLayout(new GridLayout(30,1));
for(int i=0;i<programtext.length;i++)
programtext= new JTextField(10);
prog.add(programtext[i]);
JPanel tape = new JPanel();
tape.setLayout(new GridLayout(30,1));
for(int i=0;i<tapetext.length;i++)
tapetext[i]= new JTextField(10);
tape.add(tapetext[i]);
JPanel state = new JPanel();
state.setLayout(new GridLayout(30,1));
for(int i=0;i<statetext.length;i++)
statetext[i]= new JTextField(10);
state.add(statetext[i]);
JPanel contentPane3 = new JPanel();
contentPane3.setBorder(BorderFactory.createEmptyBorder(50, 50, 50, 50));
contentPane3.setLayout(new BorderLayout());
contentPane3.add(state, BorderLayout.CENTER);
contentPane3.add(c, BorderLayout.NORTH);
contentPane3.add(prog, BorderLayout.WEST);
contentPane3.add(tape, BorderLayout.EAST);
setContentPane(contentPane3);
public void actionPerformed(ActionEvent e)
try{
if(e.getSource ()==loadp)
JFileChooser chooser=new JFileChooser();
int r= chooser.showOpenDialog(this);
if(r==JFileChooser.APPROVE_OPTION )
String name=chooser.getSelectedFile().getName();
File f=chooser.getSelectedFile();
FileInputStream filestream = new FileInputStream(f);
BufferedInputStream bufferstream = new BufferedInputStream(filestream);
DataInputStream datastream = new DataInputStream(bufferstream);
String record = null;
programtext[0].setText("");
try {
int i = 0;
while (true)
record=datastream.readLine();
if(record == null){
break;
programtext[i].setText(record);
i++;
count = count + 1;
System.out.println ("the no of lines of the program are"+ count);
catch (Exception p)
System.out.println(p);
else if(e.getSource()==loads)
JFileChooser chooser3=new JFileChooser();
int r3= chooser3.showOpenDialog(this);
if(r3==JFileChooser.APPROVE_OPTION)
String name=chooser3.getSelectedFile ().getName();
File f3=chooser3.getSelectedFile();
FileInputStream filestream3 = new FileInputStream(f3);
BufferedInputStream bufferstream3 = new BufferedInputStream(filestream3);
DataInputStream datastream3 = new DataInputStream(bufferstream3);
String record3 = null;
statetext[0].setText("");
try {
int i = 0;
while (true)
record3=datastream3.readLine();
if(record3 == null){
break;
statetext[i].setText(record3);
i++;
catch (Exception p3)
System.out.println(p3);
else if(e.getSource()==loadi)
JFileChooser chooser2=new JFileChooser();
int r2= chooser2.showOpenDialog(this);
if(r2==JFileChooser.APPROVE_OPTION )
String name=chooser2.getSelectedFile().getName();
File f2=chooser2.getSelectedFile();
FileInputStream filestream2 = new FileInputStream(f2);
BufferedInputStream bufferstream2 = new BufferedInputStream(filestream2);
DataInputStream datastream2 = new DataInputStream(bufferstream2);
String record2 = null;
tapetext[0].setText("");
try {
int i = 0;
while (true)
record2=datastream2.readLine();
if(record2 == null){
break;
tapetext[i].setText(record2);
i++;
catch (Exception p2)
System.out.println(p2);
else if(e.getSource ()==run)
String temp="";
String statetemp=" ";
String tapetemp=" ";
int l=0;
int tp=0;
String pars[][] = new String[50][5];
     for(int m=0;m<count;m++){
temp = programtext[m].getText();
String str[]=temp.split(" ");
for(int k=0;k<5;k++){
pars[m][k] =str[k];
System.out.println(pars[m][k]);
statetemp = statetext[0].getText();
tapetemp = tapetext[l].getText();
while(pars[tp][0]==statetemp && pars[tp][1]==tapetemp && tp><count)
     statetemp = pars[tp][2];
     tapetemp = pars[tp][3];
     statetext[0].setText() = statetemp;
     tapetext[tp].setText() = tapetemp;
     if(pars[tp][4]=="R")
     l=l+1;
     else{
     l=l-1;
     tp++;
else if(e.getSource()==step)
catch(Exception t)
System.out.println(t);

How can i change the font and color in mail 5?

how can i change the font and color in mail 5?

Mail -> Preferences -> Fonts & Colors
If you want to change the font and color in a message you're composing, you can right-click on the message and use the Font/Show Fonts command to bring up the Font panel (among other ways).
Regards.

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

This is a feature as far as I know.
On Sun, Dec 21, 2014 at 10:32 PM, Conquero <[email protected]>

Is it safe for me to change the housing back color on my IPhone 5c?

Is it safe for me to change the housing back color on my IPhone 5c?

Meg St._Clair wrote:
VEFipps wrote:
Is it safe for me to change the housing back color on my IPhone 5c?
I'd go a little farther than Peter and say, "No, it's not safe."
And I'd go a little farther and say, "No, it's not safe," and ask the question of why they didn't just buy the color they wanted in the first place

Changing the Target data store dynamically

Hi,
I have a requirement to load same kind of data into 12 different target tables. Client maintains data in period vise, i.e. Jan data in a table TABLE_01, Feb data in TABLE_02, Dec data in TABLE_12 etc. The structures of all these tables are same.
My program will process only one period’s data at a time and processed data will be loaded into a table TABLE_SRC. After this, according to the processing period, I need to post the data into the target tables TABLE_01, TABLE_02 etc. i.e. if the data is for period Jan then to TABLE_01, data is for period Feb then to TABLE_02 and so on.
For accomplishing the same, I need to create 12 different interfaces. So is there any way to accomplish the same using a single interface by changing the target data store dynamically? I am looking for a solution other that creating procedures.
Any Help is appreciated.
Thanks in advance.
DJ

Yes, it is possible....
1) at the target datastore use a variable at resource
2) create a query that returns all target tables in a source tab (procedure step)
3) at target tab, call the interface scenario send the query result as parameter.
That will allow you execute the same interface for disitnct targets.
Does it help you?

Change the default highlight color

In the previous version of Acrobat, you used to be able to select a default color for highlighting. I use color-coded highlighting a lot and I can't find a way to change the default highlight color in Acrobat DC. It looks like the only choice I have is to change the highlight color of each highlight individually. Where did the highlight color preference go?

After changing the color of a highlight right-click it and click "Make current properties default".

Changing the shades of color dynamically

Similar Messages

Maybe you are looking for