Changing the shades of color

I would like to change the "shades" of a MC, not the color by
bringing another MC_2 n contact with it.
Say I have ten MC_2, and I can choose any one to execute a
hitTest with the MC so that the latter changes it shade gradually.
Pleae advise.
Thanks
Uxk

I would like to change the "shades" of a MC, not the color by
bringing another MC_2 n contact with it.
Say I have ten MC_2, and I can choose any one to execute a
hitTest with the MC so that the latter changes it shade gradually.
Pleae advise.
Thanks
Uxk

Similar Messages

  • Changing the shades of color dynamically

    Hello,
    I want to drag and drop each pill into the mouth (lip_mc)
    that works fine. I want to
    1) make each pill disappear as soon as it touches the lip_mc
    2) change the tone of the lip_mc gradually to a darker shade
    (red), and this occurs by the subsequent pill that is dragged into
    the mouth.
    The above dont work. I have been able to transform the color
    once only by dragging the pill into the mouth.
    But I want this to happen continiuously by each hitTest of
    pill and lip_mc
    Please advise, I have attached my codes.
    Thanks

    Hello,
    I want to drag and drop each pill into the mouth (lip_mc)
    that works fine. I want to
    1) make each pill disappear as soon as it touches the lip_mc
    2) change the tone of the lip_mc gradually to a darker shade
    (red), and this occurs by the subsequent pill that is dragged into
    the mouth.
    The above dont work. I have been able to transform the color
    once only by dragging the pill into the mouth.
    But I want this to happen continiuously by each hitTest of
    pill and lip_mc
    Please advise, I have attached my codes.
    Thanks

  • How do I change the default window color?

    Having white screens is too bright for my eyes!! I always change the default window color in Windows (hiss hiss) to a light shade of gray and that setting carries thru to all windows (i.e. Word, Excel, notepad....). Is it possible to do a similar thing with Tiger? I see that I can choose between a couple of "schemes" from a "Desktop and Dashboard Settings" area (or similar - i don't have my mac here now so can't look to see the proper name) but I see no way to alter colors within those schemes. If you can tell me how to change the default color for my windows I will be awfully happy. thanks.

    Personally, I wouldn't trust it, and I don't hesitate to try these things most of the time even though they sometimes cause problems. But I've used Unsanity products before and they all require installing a preference pane called APE; Application Enhancement module, and that thing caused me lots of problems for my system, lots of crashes and flakiness. I won't use it again.
    But I'm sure there are lots of people using it happily, but if you don't feel confident in dealing with system problems stay away from anything that adds a system preference pane or goes up in the top menu bar at the top (Apple icons excepted) or has to start up with the system.

  • How can I change the font and color of an email signature?

    How can i change the font and color of an email signature?

    Mail > Preferences > Signature
    Highlight the Signature.
    Click Format in the menu bar and select " Show Fonts".
    Select the Font.
    Highlight the Text.
    Click Format in the menu bar and select " Show Colors".
    Select the color.
    Mail > Preferences > Composing > Message Format:  Rich Text
    Best.

  • I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    Highlite the text inside the text box and then press Ctrl+E.

  • How do I change the tab background color in Firefox 4?

    I just upgraded to Firefox 4. Tabs are now fine black font on dark grey background -- very hard to read. How do I change the tab background color?
    I have searched and the closest I can come is some instructions for modifying .css files, and it is not clear that those instructions will impact the tab background color.
    Thanks in advance for your help.

    Similar question asked by TH received another response.
    Here is the address of that question and answer:
    https://support.mozilla.com/en-US/questions/804464?s=change+tab+color+firefox+4&as=s
    I like the solution recommended there.
    Added information - after several days experience, I notice that some tabs occasionally revert to the original dark grey. So I am still looking for a better solution, ideally within Firefox rather than via add on. This seems like a basic setting for the browser that should be easy to change, rather than something so complex that I need an add on to change it. Or just build it without such a dark grey background to begin with and I would not need to change it.

  • How do I change the workspace background color?

    Hi all,
    I need to change the workspace background color from the
    default mid grey. But I can't find how to do this!
    Any ideas!
    Thanks in advance, Pedro.

    Sorry, but there's no way to change it from the default gray.
    Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • How can i change the font and color in mail 5?

    how can i change the font and color in mail 5?

    Mail -> Preferences -> Fonts & Colors
    If you want to change the font and color in a message you're composing, you can right-click on the message and use the Font/Show Fonts command to bring up the Font panel (among other ways).
    Regards.

  • How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now.  I have Win 7 Pro SP3?

    How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now.  I have Win 7 Pro SP3?

    This is a feature as far as I know.
    On Sun, Dec 21, 2014 at 10:32 PM, Conquero <[email protected]>

  • Is it safe for me to change the housing back color on my IPhone 5c?

    Is it safe for me to change the housing back color on my IPhone 5c?

    Meg St._Clair wrote:
    VEFipps wrote:
    Is it safe for me to change the housing back color on my IPhone 5c?
    I'd go a little farther than Peter and say, "No, it's not safe."
    And I'd go a little farther and say, "No, it's not safe," and ask the question of why they didn't just buy the color they wanted in the first place

  • Change the default highlight color

    In the previous version of Acrobat, you used to be able to select a default color for highlighting. I use color-coded highlighting a lot and I can't find a way to change the default highlight color in Acrobat DC. It looks like the only choice I have is to change the highlight color of each highlight individually.  Where did the highlight color preference go?

    After changing the color of a highlight right-click it and click "Make current properties default".

  • How do I programaticly change the header BG color on a multiline listbox

    How do I programaticly change the header BG color on a multiline listbox

    Hi,
    If you mean the multicolumn listbox then you have to create the its property node on the diagram (right click on the item and select "Create->property node" from pop-up menu). Then you have to select two properties:
    "Active Cell"
    "Cell Background color".
    You can do it by expanding prperty node to 2 rows and right clicking on each row. Then select "Properties" from pop-up menu and the appropriate property.
    Then you have to set-up "active cell" to the appropriate coordinates of the column header. (row=-1; column=N or column=-2 if you want to change the colors of all headers).
    Now you have to connect the appropriate colorbox or numeric variable to "Cell Background color" property node and run the program.
    I've attached the example.
    Good luck/
    Ole
    g Chutko.
    Attachments:
    Color.vi ‏15 KB

  • How do you change the tab outline color

    How do you change the tab outline color?  I wish to use a black style on my test program but the tab features have a white edge on the top and left sides to try and give a 3d look.  I've tried playing with the windows style but had no success.  Does anyone know how to remove this or change the color?  The closest I have got so far is setting a windows 7 basic theme which removes the 3d look.  This does however give a white background on the tab pages which I cannot find a way of changing in either CVI or windows.  Any suggestions?
    Thanks
    Solved!
    Go to Solution.

    Chris,
    Unfortunately, this border is only customizable through the Windows theme. Changing the theme to the basic is likely going to be the closest to what you are looking for without creating a custom theme for Windows.
    National Instruments
    Product Support Engineer

  • How do I change the white background color in a b/w line drawing jpg?

    How do I change the white background color in a b/w line drawing jpg?

    Just put a Solid Color Layer atop it and set it to Blend Mode Multiply or
    • load the Channel with the best contrast (cmd-click it in the Channels Panel)
    • invert Selection (cmd-I)
    • create a black Solid Color Layer
    • put whatever below that Layer

  • How to change the selection background color of the selected item in the popup menu of the choice box ?

    How to change the selection background color of the selected item in the popup menu of the choice box ?
    By defaut, the selection background color likes "blue", but if I want it to be "yellow" for example, how should I do ?
    Thanks

    The id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
    You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
    Example:
    import java.util.ArrayList;
    import java.util.List;
    import javafx.application.Application;
    import javafx.scene.Scene;
    import javafx.scene.control.ChoiceBox;
    import javafx.scene.layout.VBox;
    import javafx.stage.Stage;
    public class ChoiceBoxTest extends Application {
      @Override
      public void start(Stage primaryStage) throws Exception {
        primaryStage.setTitle("Example 2");
        final ChoiceBox<String> choiceBox = new ChoiceBox<>();
        List<String> tempResult = new ArrayList<String>();
        for (int i = 0; i < 10; i++) {
          tempResult.add("Item " + i);
        choiceBox.getItems().setAll(tempResult);
        VBox root = new VBox();
        root.getChildren().add(choiceBox);
        final Scene scene = new Scene(root, 300, 250);
        scene.getStylesheets().add("choiceBox.css");
        primaryStage.setScene(scene);
        primaryStage.show();   
      public static void main(String[] args) {
        launch(args);
    choiceBox.css:
    @CHARSET "UTF-8";
    #choice-box-menu-item:focused  {
    -fx-background-color: yellow ;
    #choice-box-menu-item .label {
    -fx-text-fill: black ;
    Message was edited by: James_D

Maybe you are looking for