Changing the snap level

hi all,
DB version 10.2.0.4 I was studying http://download.oracle.com/docs/cd/E11882_01/rac.112/e10718.pdf in page number 38 in the note says stats to be gathered with snap level 7. Tried changing the snap level but receiving error..
SQL> exec statspack.snap(i_snap_level =>6,i_modify_parameter => 'true');
BEGIN statspack.snap(i_snap_level =>6,i_modify_parameter => 'true'); END;
ERROR at line 1:
ORA-12899: value too large for column "PERFSTAT"."STATS$SGASTAT"."POOL" (actual: 12, maximum: 11)
ORA-06512: at "PERFSTAT.STATSPACK", line 2065
ORA-06512: at "PERFSTAT.STATSPACK", line 91
ORA-06512: at line 1the actual is 12 and max is 11 where am i specifying it ..couldnt understand the below..width of destionation column!!??
SQL> !oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).thanks,
baskar.l

Hi,
Refer to links might help out.
http://marist89.blogspot.com/2007_01_01_archive.html
http://www.akadia.com/services/ora_statspack_survival_guide.html
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/

Similar Messages

Changing the Dunning level and reports for Dunning

How can I change the 'Dunning level' for line items in the 'Dunning History/Dunning overview'? I have read in help.sap that I can change it, but am not able to find where I could do that.
link: http://help.sap.com/erp2005_ehp_03/helpdata/EN/bc/2127c4265911d286d6006008bbc8e8/frameset.htm (In 3rd para).
Can anyone tell me if there are any reports available to view the 'Dunning list'(other than Dunning History in F150).
Also, Our client needs a report which shows a list of all 'customers' and 'line items' Blocked for Dunning.
Please give me your suggestions ASAP.
Thanks
Edited by: sapfan 20062007 on May 3, 2008 10:39 PM

Thanks .
I'm looking at running the ALFS editor . I'm in WebAS 7.00 . The Themes/templates and brand colours on the left frame does appear but the bsp page does not appear . used the standard bsp page which appears as a default ( bsp add it05 ) . The error message is as follows
The following error text was processed in the system:
BSP Exception: Das Objekt entrypoint.htm_sap-themeRoot=/sap/public/bc/ur/design2002/themes/alfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F in der URL /sap/bc/bsp/sap/it05/entrypoint.htm&sap-themeRoot=%2fsap%2fpublic%2fbc%2fur%2fdesign2002%2fthemes%2falfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ist nicht gültig.
But if I run the bsp application manually then the right theme does get picked up . I made the entry in the bspthemeroot table and put in the alfs parameter in the above url ( 1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ) . The bsp application works fine but not the alfs editor . Any ideas ?

I need to change the input level and I can not open the track info pane in the new garageband. Can you help me?

I have tried the help menu. It only shows how to open the track info pane in the old garageband. It shows the info button, which is not in garageband anymore. I need to open the track info pane to change the input level. If there is another way to do this please tell me.

Open the "Smart Controls" for your track, and then press the Info button .
The "record level" slider is at the top of the Info panel below the track heads.

Exporting a project with multiple audio tracks changes the loudness level regardless of export format

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
Once I did this the audio loudness was not changed after exporting.
Workflow for when it didn't work.
I used edit in adobe audtion for the audio tracks from premiere.
Matched the audio to the loudness level I wanted, and then saved each track.
Export from premiere.
To Check Audio Loudness
Bring in exported file into new premiere project
Edit the audio in adobe audtion.
Drag the audio file into match audio to check loudness level.
I am using
Adobe Premiere Pro CC v8.1
Windows 7 on PC
Please fix this adobe.

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
I have never experienced that or had any need for a work around.
What did your Broadcast Quality Control pick up on?
Audio Levels and Loudness are two different things in this regard.

How to change the source level in java Studio creator

Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.

Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman.

TS1485 change the permission level for iTunes and iTunesHelper to allow full access. how do i do this

How do i change the permission level for Itunes

I have actually been using Amazon cloud for a while now and never had this problem. Actually, I think I did get locked out once and was able to get back in by contacting support and answering some questions. This option isn't available with Apple.. They lock you out for 90 days regardless of whether you can verify your ID. I know this because I contacted them recently and they verified my identity exhaustively and then said 'sorry-there's nothing we can do and you are not getting a refund for time lost.' I think I understand why the policy is there, but I think it's ridiculous that they make no exceptions even when the mistake is on their side, which I'm pretty sure it is in my case.

How can I change the log level of Sun Clsuter software?

Hello,
Now we have a problem about Sun Cluster.
But we cannot isolate the cause.
So we'd like to raise the log level of the cluster software.
I think we can do it.
I'm soory that we don't have any manuals about SUN here
And this is an aregent issue
Please let me know how to change the log level.
Thanks in advance.
Masaharu Nakashima.

I am not sure I understand your question fully. Are you referring to SC2.2?
The man pages of the sun cluster commands is included in the product. You may want to look into those for any command line options.
Set your MANPATH environment variable to /opt/SUNWcluster/man.
Thanks
Sujeet

Changing the Top Level navigation

Hi,
I have a situation where i need to change the Top level navigation i.e the look and feel should be like a website.
I had seen some blogs like hovering etc..
but i cant understand the concept.
Can any one explain it in a simple and detailed way.
Thanks in advance,
MrChowdary

Hi Chowdary
for the Mouse is over it . u need to code like that.
function doMouseOver(level, id) {
     //If preview mode do nothing
     if (gIsPreviewMode)
          return;
     if(isSection508SupportOn)
          window.setTimeout("keepTLNFocus(" + level +"," id ")",1500);//ACC fix
     if (level == 1)
          curNode = gNavTree.children[id];
          if (!EPCM.getGlobalDirty())
               printLevel1Table(gNavTree, id);
               printLevel2Table(curNode, -1, -1, true);
          else
               activeOneId = gLevelOneActiveID;
               gLevelOneActiveID = id;
          if (curNode.showType == 1)
               if (curNode.windowFeatures == "")
                 winFeatures = "height=" + curNode.windowHeight + ", width=" + curNode.windowWidth + ",toolbar,location,status,scrollbars,directories,menubar,resizable"
               else
                    winFeatures = curNode.windowFeatures;
                    if (curNode.windowFeatures.indexOf("height") == -1)
                         winFeatures = "height=" + curNode.windowHeight + ", "+winFeatures;
                    if (curNode.windowFeatures.indexOf("width") == -1)
                         winFeatures = "width=" + curNode.windowWidth + ", "+winFeatures;
               EPCM.doNavigate(curNode.name,1, winFeatures, curNode.windowName);

How do change the sound level input at the premiere cs6

Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel Conde

The input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html

To check who change the trace level

Hi All,
Can anyone please help me how can i get that who change the trace level in system, in our client lot of people have Sm50, St01, St05,ST12 and other trace transactions, and it become difficult to track down who is changing the traces level
people often change the trace level and forget, and it become difficult to track down the changes,
can someone help me how can i know that trace level are changed by which user id at what time
Thanks,
Dinesh

I cannot remember the exact names, but if you take look in those transactions (there are more than the ones you have listed..) then you will see a call to FM TH_CHANGE PARAMETER.
You will see the name of the dynamic profile (and the authority check in it against S_ADMI_FCD action ST0M etc...) there, or some checks performed before the function is called.
Then take a look in transaction TU02 for the history of the parameters...
Good luck,
Julius
ps: A popular error exists in transaction SMGW: Wanting to dynamically set the gateway logging via the Expert Functions menu, you might be tempted to increase the "Trace level"... This is the ST11 developer trace!!! Rather choose the Security sub menu and activate the gateway specific log there, otherwise your production system might have some performance problems from the developer trace (which is a different local topic of less interest for gateway security....).
Edited by: Julius Bussche on Nov 4, 2009 12:03 AM

I want to change the top level order of itunes playlists

This is rather odd problem. There is a lot of information available regarding organising tracks within playlists but I want o change the top level order of the playlist themselves.
I have an ipod to car CD player adaptor that can select itunes playlists as if they were single CDs. The problem is that the adaptors works through the list of itune playlists in order i.e. the first "CD" is the "classical music smart playlist" followed by the other default smart playlists and then by my own playlists. What I want is force the smart playlists to the bottom of the top level list so that the adaptor finds my playlists first. I am considering deleting all smart playlists but I see some value in keeping them. I think the answer is no it can't be done but I be interested to hear if anyone has some ideas on this.
N.B. I am using itunes 12.01.26 on my Macbook to manage my itunes library.

Hey guys m I got the answer for the below question.
Oracle have few Restriction and limitation on such Advanced table in sorting the data,
Few of them are as mentioned below ...
1. Sorting is not allowed for tables that allow inserts.
2. Sorting is not supported for tables containing updateable columns
3. Sorting is disabled when the Select column is checked for a row in a table or when Hide/Show is present in a table.
Because of the above limitations , we cannot sort or override the existing alphabetical name sort order to Date applied sort order on the View Applicant advanced table.
You can observe that , View Applicant page is having an option called "Update Status" which allow us to update applicant’s status or rating in the Advanced table.
On such updatable advanced tables, oracle does not allow us to override the sort order on any of the table columns.
Keeping it in a nutshell , I can say it's does not allow us to change the sort order of the view applicant advanced table ( which is having updateable columns ) to sort them in Date applied instead of Name( which is default ).

Why I change the energy level of port in PoE switch, the power usage of port no anyt change

I am enable the EnergyWise on a 3560, plug a IP Phone to a port, the result of the power usage read by SNMP is 6kw, when i change the energy level from 10 to 0 by SNMP, the LCD on IP Phone is goes to dark and phone cannot be use, but when I get the power usage of port by SNMP again, the result still is 6kw. Can anyone tell me why?

This project is just a short animation so every time I import the stills they are of the wrong duration so I try changing the duration by the other methods described previously, fail to be able to do that, erase everything from the project, restart and start again, initially with the preferences. So there's nothing for the still frames to conflict with. It's not the fact that there is a batch of stills that is the problem either as I keep experimenting with with single or small groups of stills in that context. I've also tried importing a variety of still formats into other projects. This is fairly new software. Could this be an incurable fault?
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri

Crrystal Reports using ADO. How do you Change the Isolation Level?

Post Author: jmetaxas
CA Forum: Data Connectivity and SQL
Crrystal Reports using ADO. How do you Change the Isolation Level? I found a knowledge base article that allows you to change it for ODBC. But nothing on ADO. I kicked around changing the reports to ODBC but even then the keys described in the article do no exist. Any suggestions?
Thanks,
John Metaxas

T-Bob wrote:
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
As usual, much easier to DO it, rather than describe it!

My iPhone automatically changes the audio level to max/zero

Hi all. I have a problem with my iPhone audio level. When I'm listening to music with my head phones on, my iPhone sometimes changes the audio level max or zero all by itself. When I try to decrease/increase the sound, it continues to increase/decrease until sound reaches to the max/zero. Restarting the iPhone stops the audio level change. But this does not solve problem once and for all. It happens time to time, but it is becoming somewhat irritating.
Anyone have a solution for this? I've checked the internet, but couldn't find anyone have this problem. I guess I'm the only one who has this problem. Thanks in advance.
BTW, my iPhone is 6 plus & its iOS version is 8.1.3 (12B446). Although I has been happening since I bought it in December

I wanted to update this post. I realised a something new with the issue and found a way that I can temporarily solve it without restarting the iPhone. Right before it happens, an orange blinking light appears on the empty (white) side of the sound level at the music player. I marked that area on the photo below, although I couldn't managed to capture that orange blinking light. If I change the sound level via buttons, sound goes to max or min (depending on my button choice). Unplugging and re-plugging headphones don't affect this. After re-plugging, blinking continues. But if I unplug my headphone, then close the music player from double tapping the home button & restarting the music player, turns it it to normal. Even my sound level stays the same, at the level I configured before this issue starts happening.
A remainder, this issue only happens after I start listening to music with my headphones. Same thing with speaker never happened. I hope this message make you all understand my issue better. I also hope that there is a solution

5500-ac change the logging level from info to warnings

We have 4 Cisco Systems AIR-PWR-5500-AC’s in our network with logging set to default of informational. This level of logging generates a lot of noise. I need to change the logging level from info to warnings, but cannot do so until I have a table that shows what messages will be excluded if I make this change.

Hi,
This should help you -
https://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part2
Link below gives the in-depth of what you need/should do for ADF Logger -
http://docs.oracle.com/cd/E15586_01/web.1111/b31974/web_testdebug.htm#BABDBCGF
Thanks
Sachin

Changing the snap level

Similar Messages

Maybe you are looking for