Changing the spam header

Is there a file I could edit that would change what the Spam Header says on all incoming scanned email? The reason is, I'd like to differentiate the spam header from my university's spam filtering vs my own.

You will need to edit amavisd itself.
/usr/bin/amavisd
Be very careful though as you can easily damage the script.
Having said that, it's not a good idea. Many mail servers and clients look for these strings. Either to strip them or to make a decision based on them. So you should only change the information after the string, but not the string itself.
As far as differentiating your own. Your headers will be added next to "X-Virus-Scanned: ...... at yourdomain.com anyway.

Similar Messages

  • How to change the page Header background colour in a Theme

    Hello,
    I want to know how to change the page header background colour. If you are in the Editor I don't find a property where to change it.
    If you are in the Theme Editor in the header bar I want to change stands <b>Theme Editor</b>. This (in my case blue colored bar) I want to change in another color.

    Hello Radhika,
    thanks for your answer. Where do I find the option for the pageheader in System Administration>Portal Display>Theme Editor ->IView Trays exactly?
    The pageheader is a picture, which must be uploaded for the web dynpro. Why should any webdynpro element in the ivew tray. There is no relationship between these two parts.
    I have not found any option to change the web dynpro pageheader. Could there any extra theme editor for webdynpro?
    Thanks.
    Olaf

  • How to change the page header?

    Hi,
    I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
    I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
    Can someone guide me how to change the page header?
    Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

    Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
    This may seem like a lot of steps, but really - it goes quickly
    ** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
    Step 1 - create a header portlet
    =======================
    If you're using Publisher...
    =====
    * Create a new portlet - choose the Header portlet template
    * Upload your image / change the header in the rich text editor
    If you're not using Publisher
    =====
    * Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
    * Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
    * Create a new remote portlet web service that references this HTML page
    * Create a portlet from the web service - make sure the type is "header"
    Step 2 - turn it on
    =======================
    * Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
    * In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
    * If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
    Done
    May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
    That help at all?
    Thanks,
    Eric

  • Outbound Plain HTML Adapter how to change the html-header field "host"?

    Hello,
    I'm using XI 3.0 SP11 and want to transmit a message to a business partner using the Plain HTML Adapter.
    My problem is now that I need to change the default Html-Header field "host" because it seems that the adapter engine is converting it to lower case and is attaching the port-number which is causing trouble with the loadbalancer/applicationserver of our business partner.
    I tried to set the appropriate http-header value in the communication channel configuration, but the adapter engine is ignoring this value.
    Thanks in advance for any ideas.
    Sascha Fuchs
    Message was edited by: Sascha Fuchs

    Hi Sascha,
    unfortunately the Plain HTTP adapter is not running in the J2EE, therefore you cannot extend the functionality with an adapter module.
    I am not sure to understand the problem right. Why do you need to change the HTTP header? What is in it in your case and what should be?
    Regards
    Stefan

  • How to change the column header name dynamically based on sysdate

    Post Author: senthi_gokul
    CA Forum: WebIntelligence Reporting
    Dear All,
            i have designed some reports. i would like to change the column header dynamically based on sysdate. up to 24 months. can u help me, which add month function using the universe. i dont know if-then-else function is having the universe tool or not?

    Post Author: prasingh
    CA Forum: WebIntelligence Reporting
    Are you saying you are not able to create an object by value (select: statement) as sysdate and put it onto the headers of your report? You can use the add_months() function on the object to add the numbers of months you wish.
    Please let me knnow for more.. You can get in touch with me on [email protected] for quick reply. 

  • Changing the Column Header and Hiding the Column dynamically???

    Hi friends..
    I'm new to OBIEE field. I'm working in a OBIEE project that requires to dynamically change the column header, and dynamically hide the column depending on the prompt value.
    I know we can dynamically change the table header using the presentation variable but I couldn't do that same thing with column header.
    I searched some forums that suggest to use java script for this purpose but I'm not able to do the same also. If anyone had same issue before please help.

    toony, I'm not sure it's possible to do all that you want exactly the way you want, but here are some ideas you can pursue.
    To dynamically change column headers without javascript, check this blog out...
    http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/
    As far as dynamically hiding a column, I don't think you can do this, but since you don't provide any details on how the PV is supposed to hide a column based on the value, are you talking about hiding a column for one PV value and another (different) column for a different PV value? Or are you talking about hiding one column when a PV has certain values and displaying it when the PV has a different set of values?
    I have managed to create both scenarios via a work-around, but the procedures require some writing so I don't want to put both. Please detail how you want your PV to "hide" a column or columns.
    P.S. I don't think column selectors will do the trick for you. Basically column selectors work like this: Say you have a report using Sales Region ID, Region Name, and Sales. Now let's say you want the user to choose if he/she wants to see annual sales, or quarter sales or weekly sales, etc. The column selector view would allow you to put the various columns (Year Sales, Quarter Sales, Weekly Sales) as an option the user can select. Once selected, the sales figure will change for the time period selected. For an example of how this is done, check out the section in this "Oracle by Example" link.
    Waited too long to publish this... Madan beat me to it, so there is some overlap here...
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/saw/saw.html
    Edited by: LC143 on Oct 27, 2008 9:21 AM

  • Change the column header according to the filter value ?

    Hello Experts,
    I have a requirement in which the customer wants to change the column header of the Sales Volume Key Figure to change according to the filter selected for the Calender Year / Month in the Free characteristics.
    I could display the header as 'Sales Volume for OCT 2000' as this is the value restricted intially in the free characteristics for Calender Year / Month.
    Any suggestion is appreciated.
    Thanks,

    Ioan Thanks for the reply.
    Probably my previous explanation of the problem was a little incomplete. Let me give a better description.
    The situation is something like this.
    I have a requirement in which the customer wants the column header to reflect the 'keep filter value' restriction that he does dynamically in the query report.
    i.e:
    -- usually the kf column header shows 'sales volume'
    -- column header with text variable of the Calender year / month variable -- 'sales volume for 2000 oct'
    -- but when the report is run, if the user wants to go and change the filter:   calender year / month > rt clk > keep filer value > select Jan 2003.
      The kf column header still shows 'Sales Volume 2000 Oct'
    How to make the column header change to 'sales volume for Jan  2003' ?
    Any suggestions greatly appreciated.
    Thanks,

  • TO CHANGE THE COLUMN HEADING IN F4 HELP

    hi all,
    can anyone tell me ?
    How can we CHANGE THE COLUMN HEADING IN F4 HELP.
    If the F4 help is available for the custom field then i want to change the heading of the columns displayed in the F4 help.

    Hi,
    Kindly note that using ALL CAPITAL letters in subject line is against the
    Read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
    Regards
    Karthik D

  • Need to change the sortable header's prompt value in the Run Time

    All
    I have an advancedTableBean with 11 columns. Out of these 11 for around 3 columns i have to change the column header's(sortableHeader) Prompt at run time. I would like to know how can i get an handle to the column header. I tried 'getColumnHeaderFormat' and 'getColumnHeaderData' but was not sure how to proceed further.
    Kindly suggest me the solution.
    Thanks,
    Praveen

    Hi,
    There is no std user-exit for this (at least we haven't found it as well).
    We have created implicit enhancement point implementation athe the end of form AUFRUF_USER_EXIT in include MF02DFEX.
    The code should be similiar to following:
    ENHANCEMENT 1  YEDSD_EO_ADD_DOC_PREFIX.    "active version
        DATA:
          ltp_doc_prefix TYPE y_dt_docpref.
    *--only in creation and change mode
        IF T020-AKTYP = 'H' OR
           T020-AKTYP = 'V'.
          CONCATENATE kna1-ktgrd kna1-kunnr INTO ltp_doc_prefix.
          kna1-yydocpre = ltp_doc_prefix.
        ENDIF.
    ENDENHANCEMENT.
    Regards,
    Marcin

  • How can I change the running head on the title page only?

    For APA formatting the running head needs to run throughout a paper, but only on the title page is it preceeded by "Running Head:". How can I change the running head on this page only?

    Menu > Insert > Section Break
    Click your cursor in the new (2nd) section.
    Menu > View > Show Inspector
    Inspector > Layout > Section > Page Numbers > uncheck Continue from previous section
    Menu is the menu at the top of your screen when you are in Pages, or anywhere else on the Mac. very hard to miss.
    Yes that is kind of a dumb question.
    Peter

  • How to change the column header/channel name in an LVM file?

    Hi all,
    I made a VI (see attached JPG) that reads 2 voltages, but after calculations and other processes, ends up writing 6 columns of data to an LVM file (7 if you count the time).
    I have read in other posts that you can change the name of each signal so that the header of each column in the LVM files doesn't just say "untitled". However, as you see in my code, some signals are numeric (double) and one is a logic (1 or 0), so there is no way to edit the waveform properties of those signals (since they are not waveforms).
    Any ideas?
    Thanks!
    Attachments:
    untitled3.JPG ‏40 KB

    I would suggest looking at this existing post:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=175554
    I'll further mention that in the loop, for each channel you want to set the name of, the attribute name for the name of the channel is "NI_ChannelName".  The example in the thread above takes advantage of the fact that "NI_ChannelName" happens to be the first one defined.  I think it would be more robust to not bother reading the existing attributes, and instead just write the "NI_ChannelName" attribute with whatever new value you want.

  • How to change the column heading as the column changes

    dear memebrs,
    Take an example fo the table EMP. I need to create a report whose parameters are the table column names. so depending on the parameter(which is the column name) the report o/p changes.
    so i am dynamically selecting the table column names and getting the o/p. The problem is when the column changes the heading of it in the report o/p is not changing.
    we have to use format trigger for this, but i am not sure what code should we write in the format trigger of the boiler plate text of the column heading , such that it changes in accordance with the input which is nothing but column name.
    for ex: If i choose EMPNO as the parameter then my column heading should become Employee Number and so on.......
    your comments are welcomed
    regards
    sandeep

    you can use a formula column of datatype character and of any width needed instead of a boilerplate text for the heading name.
    In the formula column you can write code like below
    IF :P_COLUMN_NAME = EMPNO THEN
    return('Employee Number');
    ELSIF :P_COLUMN_NAME = SAL THEN
    return('Salary');
    END IF;
    where P_COLUMN_NAME the name of the column selected dynamically(i.e. the parameter).

  • How to change the column header in XsltListView webpart

    I have a XsltListView webpart. By default it displays the column name in the header. How do I change the header and give a friendly name? I am able to change the header, if I click on header and position the cursor at the right spot and change. But sometimes
    it does not work. Is there any property which I can set in order to change the header? Thanks in advance.
    ss

    Hi ss,
    Do you use SharePoint 2007 or 2010? And the XsltListView Web part only available in SharePoint 2010.
    If you are using SharePoint 2010, to customize the header for each column, please try the following step.
    Open list view in advanced mode in SharePoint Designer.
    Select a header you need to modify > Click Customize XSLT under Design tab on the ribbon > Click “Customize Item”.
    Then we can see <xsl:value-of select="$fieldtitle"/> has selected in Code view > Replace it with the text you want to display on the header.
    For example, I want to display the string “customized header” in the header, then replace
    <xsl:value-of select="$fieldtitle"/>
    With
    Customized header
    Save the page and test.
    Thanks & Regards,
    Emir Liu
    TechNet Subscriber Support in forum
    If you have any feedback on our support, please click here.
    Emir Liu
    TechNet Community Support

  • Changing the Column Header Color

    I would like to change the foreground and background color of a column header when the user clicks on the column. I know how to detected when the user clicks on a given column, and I know there is a setBackground and setForeground method that needs to be called, the that is my problem, I don't know which setBackground/Foreground methods to call.
    Thanks in advance for any help.

    Hi,
    I fixed my problem using the setBorder() method for my table header.
    thanks.

  • SOAP RECEIVER: Possible to change the soap header request

    Hi
    Is it possible to change what is included in the soap header like namespaces (.. xmlns:ns="http://what.com"
    Specifically I need to have the "http://Strange.org/thisis.xsd" (see below) included in the header and the <ns:pi-create> included in SOAP-ENV
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ns="http://Strange.org/thisis.xsd">
    <SOAP-ENV:Body>
    <ns:pi-create>
    <request>
    <request-data>...
    </request-data>
    </request>
    </ns:pi-create>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    Hope somebody can help
    Cheers

    Hi Bowie,
    1.You can change the Namespace. condition is no obj's under the namesapce then only it's possible otherwise u can't.
    2.create a new namesapce what ever u want and copy all the obj's under that namesapce.finally delete the previous one.
    XMLAnonymizerBean
    Use
    You use this module to anonymize XML elements and attributes by removing namespaces or namespace prefixes from the XML document of the main payload.
    You can define a particular namespace prefix for each namespace. You can also change the encoding attribute of the XML declaration.
    Integration
    You can use the module in adapters that can be extended in the module processor.
    Activities
    Entries in the Processing Sequence
    ●      Insert the module before the adapter module.
    If the adapter comprises multiple modules, for information about the position of the module, see: Extending the Module Chain in the Module Processor
    ●      Enter the module name AF_Modules/XMLAnonymizerBean.
    ●      Select the Module Type Local Enterprise Bean.
    ●      The system proposes a module key.
    Entries in the Module Configuration
    ●      anonymizer.acceptNamespaces
    Enter a list of namespaces and their prefixes that are to be kept in the XML document as follows: namespace1 n1 namespace2 n2 u2026
    To enter a namespace without a prefix, enter '' (two single quotation marks).
    Any namespaces you do not specify are removed from the XML document.
    ●      anonymizer.quote
    Specify the character to be used to enclose the attribute values.
    The default value is '. The parameter is optional.
    ●      anonymizer.encoding
    To use a code page other than UTF-8, enter it.  The parameter is optional.
    For example, enter ISO-8859-1.
    Example
    The anonymizer.acceptNamespaces parameter has the following value:
    urn:sap-com:document:sap:rfc:functions rfc urn:sap-com:document:sap:soap:functions:mc-style rfc
    ●      Payload before using the XMLAnonymizerBean:
    <Z_PAYMITEM_GET_LIST
      xmlns="urn:sap-com:document:sap:rfc:functions"
      xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
      xmlns:xsd="http://www.w3.org/2001/XMLSchema"
      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <I_ACCOUNTIDENT xmlns="">
        <ACCOUNT_NUMBER>0080000094</ACCOUNT_NUMBER>
        <BANK_COUNTRY>DE</BANK_COUNTRY>
        <BANK_COUNTRY_ISO>DE</BANK_COUNTRY_ISO>
      </I_ACCOUNTIDENT>
    </Z_PAYMITEM_GET_LIST>
    ●      Payload after using the XMLAnonymizerBean:
    <?xml version='1.0' encoding='utf-8'?>
    <rfc:Z_PAYMITEM_GET_LIST
      xmlns:rfc='urn:sap-com:document:sap:rfc:functions'>
      <I_ACCOUNTIDENT>
        <ACCOUNT_NUMBER>0080000094</ACCOUNT_NUMBER>
        <BANK_COUNTRY>DE</BANK_COUNTRY>
        <BANK_COUNTRY_ISO>DE</BANK_COUNTRY_ISO>
      </I_ACCOUNTIDENT>
    </rfc:Z_PAYMITEM_GET_LIST>
    with rgds,
    MFH

Maybe you are looking for