Changing the time of a jpeg file

I have Photoshop Elements 12 installed and am trying to convert the times taken of photographs taken whilst overseas. In those days I did not change the time on the cameras (Canon 20D and a Canon Powershot) to reflect the clock differences but have since learnt it is far easier to complete it at the time! The problem I face is that when I convert the photograph times;  the two sets of JPeg files are not synchronising and the Powerhot JPegs are an hour behind. Given the lack of functionality in Window Vista and Windows Picture Gallery, these photo times can only be changed in Elements but when I do change them, the original file on the hard drive does not change accordingly. To get around this I have to change them in Elements to one hour later than actually shot. Does anyone know how to change the time simultaneously on the hard drive as with Elements? Its only a problem with the Powershot - the 20D is smarter!

Thanks for the reply and the suggestions. I changed the time of a Powershot file in Elements and used the file/write metadata to files as you suggested but with the same outcome - an hour's difference between what is in Elements and what is recorded on the hard drive. The messages stated metadata safely saved to file. I also checked the file properties - achive was ticked not read only....

Similar Messages

  • My time capsule change the time on ALL my files by one hour.

    On the 29th December all the files on my time capsule went out of sync with my mac by one hour. I use it for backup. I have other backups on a Lacie drive and these were all OK but because it went forward in time my syncronise software saw them all as changes and started copying from the time capsule to my iMac. I stopped it and after recovering the damage it had done I proceeded to copy ALL my data back to the time capsule to reset the syncronise error.
    Its been OK since then but this morning it all went wrong again. It started by my backup failing because the network share was not accessable so I went into my backup scripts(chronosync) and reselected the backup drive. I then did a trial sync and lo and behold the whole lot is back out of sync again and this time they have gone back in time.
    Did we enter British summer time in the middle of winter or did the earth tilt on its access and caused the UK to be in The NEtherlands? Or did Apple do something that I cant resolve.
    Anyone else having similar problems? Ive been googling this and thought I had found it by installing Airport Uitlity 5.6 but I cant do that as I have upgraded all my machines to MOuntain Lion and its not compatible. I think on 5.6 you can adjust the time zone setting.
    I need to tell the time capsule which time zone it is in and all shoudl be OK

    Bob
    Thanks for that   - Airport utility 5.6 is now working but I cannot see anything wrong. It possibly went wrong on the 29th December and has just gone back to normal again so I think I will have to let the backup recopy all the files.
    I looked in the logs and found
    No Address for NTP server time.apple.com. and then on Jan 08 at 09:49:38 I got
    Clock synchronized to network time server time.apple.com (adjusted +3597 seconds). (thats my hour!!!)
    Question no is why - could be a DNS problem but why on the 29th and back on the 8th Jan.
    Nothing changed in my network router, maybe something at the ISP.
    Anyway now copying all the data back to the time capsule.
    By the way I have my DNS as my router 192.168.1.1 and 208.67.222.222 - when I look at my router the DNS is 8.8.8.8 and 4.4.4.4 which is what my ISP told me to use. Maybe I should put 8.8.8.8 and 4.4.4.4 in the DNS for the time capsule?

  • Need to change Date/Time stamp on jpeg file

    I combine images into panoramas using PTGUI. The problem is that the output image file is date stamped as the time that I created the image. I really want the date/time stamp to be the same as the images that go into the panorama. I cannot find a way in LR to change this.
    Lee

    > By the way, Victoria, should you be promoting your url here? It belongs in your profile. It's in the forum rules somewhere and others have been picked up on it before.
    >
    > Joe
    Oh, thanks Joe, I'll change that then. I did go looking for forum
    rules, but couldn't find any!
    Victoria

  • AppleScript to Change the Time and Date a File Was Added

    I've ripped a bunch of TV shows I bought on DVD to watch on my iPhone. However, I imported them all at once, so the order they were added to my library is random, and as a result, choosing to sync the "Least Recently Added" episode doen't mean the first episode of the season.
    Is there any way to write an AppleScript that will incrementally change the date added so that episode 1 was imported before epsiode 2, etc?

    I found a relatively automated way to deal with this issue. Just incase someone comes across this thread down the road, here it is.
    1) Download "Track Names With Incremented Number v1.0" (http://dougscripts.com/itunes/scripts/ss.php?sp=tracknameincnum)
    2) Add an incremental number before each episode ([#] [name]) — Make sure the files are ordered my track or episode number.
    3) Download "Rename Files v1.2.1" (http://dougscripts.com/itunes/scripts/ss.php?sp=renamefiles)
    4) Rename the tracks so they now include the incremental number in front of them.
    5) Delete the tracks from iTunes
    6) From the finder, drag the files back into iTunes and re-import them.
    7) Download "Remove n Characters From Front or Back v3.0" (http://dougscripts.com/itunes/scripts/ss.php?sp=removenchars)
    8) Remove the incremental numbers from the front of the track names.
    9) Run "Rename Files v1.2.1" again to revert the file names back to there original names before adding the incremental number.

  • Published Calendar CHanging the Time of Events

    I am using iCal 4.0.4 on my MacBook Pro with OS 10.6.5. I have both personal and work related calendars in iCal. The personal calendars sync to mobile me very successfully and from there to my mobile devices. The problem is with the calendars which are stored on "On My Mac" which I want to publish to a website via Mobile me. In the past this was simple, however after having an overhaul of our calendars, I noticed that the published calendars were all 8 or 9 hours ahead of the correct time. I have followed the advice on the support pages regarding setting time zones and nothing is working. I have tried using floating and that doesn't seem to work either. Any suggestions?
    Thank you

    Thanks for the reply and the suggestions. I changed the time of a Powershot file in Elements and used the file/write metadata to files as you suggested but with the same outcome - an hour's difference between what is in Elements and what is recorded on the hard drive. The messages stated metadata safely saved to file. I also checked the file properties - achive was ticked not read only....

  • How can I change the time of photos in info in iPhoto for iOS. I've done it in iPhoto for Mac but when I sync to my ipad the info field goes back to the camera time ignoring "modify original files" in iPhoto for Mac?

    I used "adjust date and time" and"modify original files" to correct the time of photos taken on a camera used in Peru which was set to UK rather than local time. which is 6 hours  behind. This was to bring them into line with shots taken with other cameras set to local time. This was using iphoto 08 on a Mac. I then synced to my iPad. The photos stayed in the correct order in photos but in iphoto (iOS version) the original dates appear (the camera dates) and so the photos are out of chronological order again. This looks like a bug but is there a fix?

    don't know what you mean by "write to master" but speculate that it means modify the original times, in which case the taken times on the camera should no longer be present
    No,I meant your using the option "modify original files" will do exactly that - change the capture date original master files stored in the iPhoto library. Only when you do that, the "date modified" of your original files will be changed as well, and it will now be the date of your manipulation of the capture date.
    Oh - I hadnt considered that possibility - but of that were the case, why don't my manipulated photos go to the end of the sequence as I have done all the manipulation after the end of the holiday??
    In photos the synced album maintains the chronological order which I set up on the mac by modifying the originals, as you said,
    That is what the linked article is describing: "some apps may sort your photos in the order you specify in the app (such as iPhoto or Aperture"
    The problem I have is that, in the album, iphoto (ipad) sorts them differently to both iphoto (Mac) and the photos tab on the ipad
    In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
    "on ipad this is the Photos tab" - but this displays as per the original sequence ignoring time adjustments - the manipulations seem to be ignored (but are reflected in the album in the photos tab) and the photos tahat have been modified stay in their original positiom - they don't get put the end
    Because the library uses a different date - the date modified - the date of the last time the file has been changed in any way - any editing you do to your image, including adjust date and time will change the "date modified"
    This may change the sorting of the database but it appears not to influence the order in the albums
    In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
    So how can i get my photos in date and time order in an album in iphoto for ipad?
    Thanks for your help

  • How to change the Time Zone in OAM  log & audit files

    Hi All,
    I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
    Could any one please tell me how to change the Time according to the place ?
    It is an urgent plzzz.
    Thanks & Regards,
    Vaasu.

    could you find how to change the tine zone. i am also getting this problem
    thanks

  • When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

    When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

    When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

  • Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • How can I change the time zone for a calendar entry with iOS 7?

    I want to make a new entry in my calendar (iOS 7) using a different time zone as the one I'm located in. There isn't any option to choose the time zone like there is in OS X.
    I know I can switch off the option to automatically change the time zone in the preference pane of Mail, Contacts and Calendar to get the option in calendar but I want to use this automatic switch.
    Is there any option to change the time zone of a calendar entry without loosing this automatic switch?

    Got it!
    In your backing file you'll need the following in your handlePostbackData method:
    BookBackingContext bookCtx = BookBackingContext.getBookBackingContext(arg0);
    bookCtx.setupPageChangeEvent("PageLabel");

  • How do I change the length of an audio file?

    How do I change the length of an audio file without changing the actual recording?
    I want to aligne start and end points to the rest of my project.

    Well, yes and no. I have tried the Bounce track in place function, but it did not do what I was after. However, today I got an idea that solved the problem. I copied the region I had punched in several times. Then I used the Bounce track in place function. This made a track that was just as long as all the other tracks. Finally I silenced the audio "clips" that I had used to make the region longer. I have now 24 tracks to transfer to the Alesis HD 24 that starts, and ends, at the exact same point. This will suit the Alesis software just fine, I think.
    Thanks for the tips.

  • Is there a way to change the time of a saved data to be as the same as the time-axis of the waveform graph?

    Hi,
    I've a problem while saving the waveform to a spreadsheet.
    The problem that I'm facing is that I'm not able to save/change the time-axis of the waveform graph into the excel spreadsheet.
    The attachments below are what I've programmed on.
    1st file that would be asked to save is the results of the waveform.
    2nd file, supposing to be the time-axis
    3rd file, is the multiplication of results of CH 1 and CH 2.
    Would be glad if someone can enlighten me with a solution which is suitable for LabView version 8.2 and Tektronix DPO 72004.
    Thanks. ((((:
    Attachments:
    Modification of 2 CH waveforms (Multiply and Sum).vi ‏63 KB
    Modification of 2 CH waveforms (Multiply and Sum) Front Panel.JPG ‏220 KB
    Modification of 2 CH waveforms (Multiply and Sum) BD.JPG ‏92 KB

    I've saved it as text file which could be read if I open it with excel spreadsheet.
    My aim is to get the time-axis (x-axis) in the file rather than to get the date and time in the file.
    The attachment is the waveform results that I've obtained.
    Attachments:
    waveform vaule.txt ‏433 KB

  • How do I change the raw image to jpeg with element 6

    How do I change the raw image to jpeg using element 6?  I am using a canon 10D camera.

    From the Editor choose:
    File >> Open
    Then navigate to your raw file
    When the image appears in the converter use the sliders to make your raw adjustments, then click open image.
    From the Editor use:
    File >> Save As >> jpeg
     

  • My macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    my macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    Deleting the System Preference or other .plist file
    Install Caffine.
    http://lightheadsw.com/caffeine/

  • How to change the time ??

    Hello guys,
    I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking  typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!

    Hi Gerardo,
    Complete these steps on the Cisco CallManager Express in order to display the correct time:
    Configure the type 7970 command under the ephone.
    ephone  1
    device-security-mode none
    mac-address 0017.59E7.492C
    type 7970
    button  1:1
    Configure the time-zone command under the Telephony service.
    telephony-service
    max-ephones 5
    max-dn 5
    ip source-address 10.1.0.1 port 2000
    auto assign 1 to 5
    time-zone 8
    dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
    voicemail 6000
    max-conferences 12 gain -6
    transfer-system full-consult
    create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
    Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
    CME-CUE(config-telephony)#create cnf-files
    CNF file creation is already On
    Updating CNF files
    CNF files update complete
    Verify
    Comlete these steps in order to reset the Cisco 7970 IP Phone:
    Press the Settings button on the Cisco 7970 IP Phone.
    Enter the **#** key sequence on the phone keypad in order to reset the phone.
    The correct time displays on the Cisco 7970 IP Phone after the reset.
    Troubleshoot
    Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
    Verify the phone configuration on Cisco CallManager Express.
    Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
    Log in to Cisco CallManager Express.
    Complete these steps in order to display the 7970 configuration file:
    Issue the cd system: command.
    Issue the cd its command.
    Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
    Verify that the time zone parameter is correctly configured . The output of the command is shown here:
    CME-CUE#more xmldefault7970.cnf.xml
    M/D/YA
    Greenwich Standard Time
    2000
    10.1.0.1
    {7970 Feb 05 2009 12:31:07}
    2
    English_United_States
    en
    United_States
    United_States
    0
    http://10.1.0.1:80/localdirectory
    Complete these steps in order to verify that Cisco CallManager   Express successfully sends the 7970 configuration file to the Cisco 7970   IP Phone:
    Log in to Cisco CallManager Express.
    Issue the debug tftp events command.
    Issue the terminal monitor command.
    Reset the Cisco 7970 IP Phone.
    This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
    Feb  5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
    1033 for process 287
    Feb  5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
    00:00 for process 287
    Feb  5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
    .8-3-2S Last=Phone-Keypad
    Feb  5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
    ocket:1 DeviceType:Phone has
                registered.
    Regards,
    Justin

Maybe you are looking for

  • Can you create an image field in the form so a respondent can upload a photo to it?

    Can you create an image field in the form so a respondent can upload a photo to it?

  • Video Ipod and Photos

    Got my video Ipod today and when I sync my Ipod Adobe downloader always opens and tries to, what I think, transfer photos to my Ipod. I don't want this to happen. I went into my Ipod options and DO NOT have a check mark in the "synchronize photos fro

  • Export format for clips to be used in larger project.

    Back in the PE2 days, I used to capture and trim a clip and "export movie"  which resulted in a "DV-AVI" file.  This is what I understood PE "liked" and the best format to use for import to a larger project (and it worked nicely every time).  Now, in

  • DMS Migration Advice

    Hi Everyone, This is the scenario: I have one SAP Instance, with DIR's being stored into 15 different Content Servers. I have written a program to download all document data to a spreadsheet, including the storage categories, etc et al. I have writte

  • Custom login module for weblogic portal 10.3.2

    Hi everyone i want to develop a custom portal login module for weblogic.. can anyone help me out with details how can i implement it ...any links provided will ve very useful Thanks in advance.