Changing the Time stamp on Cisco AP's
In particular, 1200 series AP's
I cant find a link anywhere in the setup (using the GUI interface).
Thanks for the help.
Lonny
Hey Lonny,
No worries!
Q. How do I change the date and time settings on the Cisco 1231 AP?
A. Go to the web interface (GUI), choose Services > SNTP, select Time Settings and then change the time.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps!
Rob
PS: If enabled, you can also access the AP via Telnet and ssh for cli commands :)
Similar Messages
-
How can I change the time stamp of a waveform?
Hello,
I am using a "waveform" data type and I want to change its time tamp.
There is a vi "set waveform attribute.vi". I connected a string NI_ExpTimeStamp and a integer to the set waveform attribute.vi.
Nothing happens. It does not seem to replace anything since the boolean output remains "false", but I do not get an error.
SimonI would use the Build Waveform primitave. Feed the waveform in and set the t0 component.
I am not comfortable with the timestamp attributes. Both NI_ExpStartTimeStamp and NI_ExpTimeStamp describe the "time stamp of the first sample". So, what happens if they are set to different values? I have used set and get on other attributes with great sucess, but the timestamp attributes seem to be attempting to duplicate values that already exist elsewhere in the waveform.
Message Edited by jasonhill on 03-01-2006 08:24 AM
Attachments:
waveformtimestamp.PNG 3 KB -
How do I change the time stamp on my FI_GL_6 delta?
As of today, I am only capable of loading this once a day. I need to be able to load this more frequently, (4 or 5 times daily) . I know there is a field in table ROOSOURCE - DELTASAFE2, which I believe needs to be changed. But I do not know how to modify this table.
Any help would be greatly appreciated!!
Kindest Regards,
SteveHi guys,
It appears to be working. After following that note, and flagging that field in the QAS system, when I do a delta, it pulls in, let's say, 40 records. If new records are then added, let's say 15 new records,it will pull in 55. So it accumulates them throughout the day. So the ODS key figures need to be an over-write status. Based on what this table is telling me, at 2am, of the next day, it will start over. This is definitely a lot better then only receiving this data once a day.
I'd love to give all of you the full amount of points, but i'm rather new to this and not quite sure how it works.
I don't want to close this question prior to awarding them. Do I simply flag full points on the left hand side, then close the question?
Steve -
Apple TV won't play back my album images from IPhoto in the edited order I want. The order seems to revert back to the time stamp for the photos. I have combined the photos from 3 different cameras and they had slightly different clock settings. I am working on an edited presentation of about 1500 Pics from travels in Turkey this summer and sometimes the order makes more sense if I move some of the images quite a ways. Is there any solution short of changing the time stamp on every single image?
Using the 'adjust date and time' setting is the best way to syncronise the photos from all your cameras. However as you say this merely puts them all in the correct order chronologically.
If there are photos that you feel would be best somewhere else in an album other than in date order, it may depend on how many as to which is the best option for you. If it's only a few you may wish to adjust the date/time on these few manually so they fit in with the rest where you want them.
If you have a lot of photos you want in a different order to the order by date, or you really don't care about what date/time is used and just want them in the order you want them in, then 'batch change' is the best option.
From the view menu, select 'sort photos - manually', drag the photos around until they are in the order you want, select all of them. Now select the batch change option and choose 'Date' from the 'set' options, type in a date and time for the first photo, it can be anything but it's probably a good idea to choose something close to the original date, then check the box 'Add'. You can keep the value set at 1 minute or enter any value you want, it may be more realistic to divide the length of your holiday by the number of photos you have to calculate a value, but it really isn't necessary. Clicking OK will adjust all the dates without affecting the title or description and the photos will now show on the Apple TV in that order.
Just to be sure iTunes is updated, you may want to go to the advanced menu/choose photos to share in iTunes and deselect the album, apply, reselect the album and apply again. -
Change of time stamp on RAW thumbnails
I have PSE 9.0. I shoot in RAW on a Canon 550D and a Canon G10.
When I open a RAW file in editor, whether or not I edit that file, it changes the time stamp on the thumbnail by 1 hour. If I open it twice it changes the time by two hours, eg from 1.10pm to 2.10pm to 3.10pm. Of course, when I then re-open the Organiser, these thumbnails are out of order as shot.
I have no idea why this is happening. Is there some setting I need to change?I think unlike jpeg files where the EXIF data will be embedded in the file Adobe will read the XMP data for Raw Files.
You can open an image in Full Edit and click File >>File Info to bring up the XMP dialog. The raw tab offers a wealth of information.
However the behavior you are experiencing seems odd and there looks to be a bug in the most recent update.
As you say it alters the order of photos from their original sequence. I think Adobe could introduce File Name Order as they do in Bridge. This would be a useful alternative for sorting files in the organizer.
I remember this old blog posting from 2008 which you may find interesting:
http://jmoliver.wordpress.com/2008/02/29/time-zones-in-digital-photography/ -
SMS - Can I change the time/date of 'sent' message
Hi,
Is it possible to change the time stamp of an SMS already sent (i.e. modify actual sms time stamp and also the delivery report)? (Phone is Nokia E65)
ThanksNo you can't, I have not even come across any 3rd party application that can do that. The time stamp (receive & sent) is made by the provider message center.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR.. -
Hi,
I recently got back from Europe and didnt change the time on my camera as I went so when iPhoto sorted the photos it splits the days up by Australian time (the camera was set to this) not the local time of where I was.
Isthere a way of changing the time stamp to -8 hours from the timestamp?
also, can I do an automator action to change the time on all photos by -8 hours to make them correct to where they were taken?
Thanks
DaveI recently got back from Europe and didnt change the time on my camera as I went so when iPhoto sorted the photos it splits the days up by Australian time (the camera was set to this) not the local >time of where I was.
Isthere a way of changing the time stamp to -8 hours from the timestamp?
No that is in the image and could only be modified by an image editor - like photo shop elements
also, can I do an automator action to change the time on all photos by -8 hours to make them correct to where they were taken?
Even easier - select the photos and goto the Photo menu ==> adjust date and time
LN -
i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
where is the data stored when i moves messages to the imported pst?
after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?I am not sure what you mean by this.
is it ok to delete outlook ID's copy/backup as running out of space?
If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
Are you updated to the latest version of Office?
After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
This may help:
http://www.officeformachelp.com/outlook/troubleshoot/ -
When or How does the time stamp on Report Manager / Data Collection change
Hi,
I have been waiting since 10am waiting for data to be available. Unfortunately, the Sun MC has not updated the time stamp. I am unable to create graphs for the machines I setup this morning? Any ideas on how to post data faster than waiting forever for Sun MC server?
thanksHi,
Clearly a bug. You can try changing your Tools|Preferences|Database|NLS|Timestamp Format to match the Date Format as a workaround. Otherwise why not upgrade to the lastest production SQL Developer release (3.1.07.42)? The bug does not occur there.
Regards,
Gary
SQL Developer Team -
How to change the time ??
Hello guys,
I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!Hi Gerardo,
Complete these steps on the Cisco CallManager Express in order to display the correct time:
Configure the type 7970 command under the ephone.
ephone 1
device-security-mode none
mac-address 0017.59E7.492C
type 7970
button 1:1
Configure the time-zone command under the Telephony service.
telephony-service
max-ephones 5
max-dn 5
ip source-address 10.1.0.1 port 2000
auto assign 1 to 5
time-zone 8
dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
voicemail 6000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
CME-CUE(config-telephony)#create cnf-files
CNF file creation is already On
Updating CNF files
CNF files update complete
Verify
Comlete these steps in order to reset the Cisco 7970 IP Phone:
Press the Settings button on the Cisco 7970 IP Phone.
Enter the **#** key sequence on the phone keypad in order to reset the phone.
The correct time displays on the Cisco 7970 IP Phone after the reset.
Troubleshoot
Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
Verify the phone configuration on Cisco CallManager Express.
Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
Log in to Cisco CallManager Express.
Complete these steps in order to display the 7970 configuration file:
Issue the cd system: command.
Issue the cd its command.
Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
Verify that the time zone parameter is correctly configured . The output of the command is shown here:
CME-CUE#more xmldefault7970.cnf.xml
M/D/YA
Greenwich Standard Time
2000
10.1.0.1
{7970 Feb 05 2009 12:31:07}
2
English_United_States
en
United_States
United_States
0
http://10.1.0.1:80/localdirectory
Complete these steps in order to verify that Cisco CallManager Express successfully sends the 7970 configuration file to the Cisco 7970 IP Phone:
Log in to Cisco CallManager Express.
Issue the debug tftp events command.
Issue the terminal monitor command.
Reset the Cisco 7970 IP Phone.
This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
Feb 5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
1033 for process 287
Feb 5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
00:00 for process 287
Feb 5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
.8-3-2S Last=Phone-Keypad
Feb 5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
ocket:1 DeviceType:Phone has
registered.
Regards,
Justin -
Hi Guys,
My Customer is having the problem about DST (date summer time) specifically about IP Phone 7940 and 7960. When finish the date summer time this model don´t change the time, only after restart logical or phisical. I simulated the problem in the CUCM with the same version 8.6.2.22900-9 and the problem too occur. I did the following procedure to try solve the problem:
1) Put the lastest version firmware about IP Phone and didn´t worked;
2) Put the lastest version dst and didn´t worked;
I search about any bug related and didn´t found nothing.
Any have idea about this?
Thanks,
WilsonHi Wilson,
Try installing TZ updates with steps in the document:
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074298&release=8.6%282-2013d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
Please find the link for EOS and SW Maintenance for 7960
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-574072.html
Hope this helps!!
Regards.
Tirtha -
DFS replication is OK, but it is changing the times on files
I have two 2008R2 servers that use DFS to replicate data over a wireless link (150MB/s).
They seem to replicate really well, except that some of the files seem to have different times, that are off between hours/minutes and occasional years.
If I do a checksum (ie MD5 Hash) on the equivalent file on each server, the files are exact matches, only the time stamp seems to have changed.
I am checking for anomalies by running a comparison using RoboCopy, which tells me which files are newer/older.
Any ideas on this? Am I missing something obvious?
50% of the time half the stuff you read is only half true.I recommend that you post this in the Windows Server Forum:
http://social.technet.microsoft.com/Forums/en-US/winservergen/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How to get the Time Stamp if we use User Status
Hi Gurus,
We used User Status to control several Orders. Now we are required to get the "time stamp" when we change from one status to another, is that information available in the system?
If not, how do we get the time when a user status is changed from one to another?
please advice,Hi,
To check such kind of changes you have to follow below path,
Go to Status tab (Blue Ikon) --- >Extra -> Change Documents-> All- --- > Choose All Changes
SAP note 390635 provide the possibility to write change records for process and production orders as modification.
please refer this link also,
[Link|https://www.sdn.sap.com/irj/sdn/profile?userid=3781605]
Regards,
R.Brahmankar -
How do I fix the time stamp?
How do I adjust the time stamp on messages in my inbox? When my mail comes to my iphone, the time is what I would assume is correct, but on my mac it shows a time stamp is for 5 hours later. I looked in mail preferences, but couldn't find anything.
Did you recently change time zones? Check the time zone on your system (make sure it's correct) and then restart Mail.app.
I just found that Mail has a bug where it doesn't update the received dates in the inbox when I change the time zone. Even new mails that arrive arrive in the previous time zone, which had the funny effect that I was seeing mails that had arrived 1 hour in the future.
It can be remedied by restarting Mail.app. -
The time showing on Cisco Unified CCX Historical Reportsare not correct
Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar ReddyHi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Also please refer the below thread for changing time zone.
https://supportforums.cisco.com/thread/2145833?tstart=0
Hope it helps.
Anand
Pls rate helpful posts !!
Maybe you are looking for
-
how do i get my money back from itunes /apple they charge my cc but did not deliver the merchandize
-
Transaction launcher not rendering correctly in ECC6
We're moving to ECC6 and have found that when our CRM5 Web IC launches a transaction in ECC6, it does not render correctly. It works ok in 4.7 Enterprise but in ECC6, the transaction (transaction PIQSTM) is displayed half way down the screen, the but
-
SAXException2 with ID and IDREF
Have an XSD that declares an object with an ID and another object with an IDREF as follows: <xs:element name="subject" maxOccurs="unbounded"> <xs:complexType> <xs:attribute name="id" type="xs:ID" use="required"/> <xs:attribute name="name" type="xs:st
-
Turning Off Shuffle in Itunes 11
Dont even get me started on how bad ITunes 11 is! Does anyone know how to turn off shuffle? Clicking the usual shuffle sign does nothing but change the song. My ITunes NEVER plays in order and always skips to a random song!! Help!!!!!
-
i recently purchased Adobe Acrobat XI Pro Student and Teacher Ed (Windows, English). during installation it stopped with the message "require Service Pack 3". what is this, and where / how do download? aslo, how do i remove all other / previous ve