Changing the Transport Request of an Object(Report)
Hi,
By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
Regards,
Nitin
Hello,
Delete that perticular object from the request.
And save that object again , so , system will ask you for the request again.
Regards,
Naimesh
Similar Messages
-
Changeing the Transport request Attributes?
Hi Guys,
Can anybody tell me how to Change the Transport request Text , means while creating a Request u will enter the Description for Each request.Can anybody tell me how to change that description?
Very Urgent.
Thanks,
Gopi.HI,
You cannot change the text of a request if you are not the owner of that request..first change the owner of the request to your id and change the text.
Thanks
mahesh -
Identify the transport request for released Objects from BW(any BW Object)
Hi
How do i identify the transport request in which i have collected the BW Object(Say Transfer rule) which got released to the testing system.
Please guide me.
Thanks,
SatyaHi Satya,
Just follow these steps,
1)Go to the Update Rule and Double click on the Rule.
2)Click on Extras->Object Directory Entery>In hte Heading u can c Object.
3)This Objectr has Detials>R3TRUPDR-->Tech Name of Update Rule
4)Come to SE03
5)Come to Eiight Row-8 and Enter UPDR in the 3 Column adn the Tech Name in the 4 Column,TICK it and Execute
Now it will display when and all it gpot transported.
Similarly u can do it for Objects like MPRO for Multiprovider,ODSO for DSO,ETC
Rgds
SVU123
Edited by: svu123 on Dec 10, 2009 12:05 PM -
To change the Transport request nUmber
Hi
i have created some programs with diffrent request numbers
and task numbers
now i need to change the descriptions , requst numbers for the same programs
how to change that
Thanks in advanceHi Sri,
if the request is not released just double click on the request and click on change button (pencil icon) click on Properties tab and you can change the description there, just save it and you are good to go.
Hope it helps
Gothrought the following links,
Changing description of a Transport object
Regards,
Harish -
To change the Transport Request Number Range.
<b>Hi Experts,</b>
My customer needs a typical solution.
He wants SAP to create the Future Transport Requests starting from 10000. ( Ten thousand)
now the sequential order is 321
that is <SID><K9>00321. From now on the new transport request should start from 10000
i.e.
<SID><K9>100000
<SID><K9>100001
<SID><K9>100002
etc.
Is it possible. ?
Thanks for your help.
Best Regards,
Raghunahth LHi
Check the report RSWBO301 and check its documentation..
Press "I" button in the selection screen to get the documentation..
I believe this might solve your problem...
Program documentation
Short text
Number Assignment for Requests: Find Free Interval
Description
This report program searches for a free interval for numbering requests.
If the search is successful, you can save the interval. The request
numbers are then taken from this interval.
Requirement
For customers the number range interval includes the follwing areas:
o 900000-999999 (just numerals)
o 9A0000-9ZZZZZ for ASCII character set or
9AAAAA-9Z9999 for EBSDIC character set.
You only need to execute this program if you have come to the end of the
number range interval, but there are still large gaps in the range that
you want to use up.
Example
Why you might get into this situation:
The customer has the R/3 System C11. The last number assigned is
C11K900115. The customer now imports transport request C11K9ZZZZA
from an external R/3 System C11 into the customer system C11. The
next request created in this system will have the number C11K9ZZZZB
Procedure
Proceed as follows:
1. Execute this program in transaction SE38.
2. Enter the interval limit, for example 5000. You can change this
limit at any time.
3. Choose Execute.
If you entered an interval limit of 5000, the report searches for a
free interval with a size of 5000.
4. If the search was successful, you can save this interval. If not,
repeat the search with a smaller interval.
Thanks,
Naren
Thanks,
Naren -
How to change the transport request of a NOTE without undoing the note
When we applied the OSS NOTE we put it in a transport request. How can we move the objects into another transport request? Since this is a REPAIR type, SAP does not allow manual copy of the entries. I don't want to include the objects of this transport into another one, Is there any other way?
1. Create a new transport request in SE01
2. Select the request and click on "Include Objects: button.
3. Select "Freely Selected Objects: option from the pop-up windoe
4. Select "Selected Objects" option
Now you see three rows without any PGMID selected.
5. Check the checkbox corresponds to the row and enter the value OBJ & OBJNAME (Textbox without any label). (This valued can be retrieved from your previous request).
6. Delete the same object from your previous request.
7. Click on "execute" button.
8. Click on "Save In request" button. -
How do I change the "Owner" of my Business Objects Reports
Here is my problem.
When we upgrade Business Objects we 'convert' a large number of reports to the BO XI rel2 version of the reports. During this convertion process all the reports were switched to be 'owned' by usercode 'Administrator'. Our users are now wanting to move/change/delete these reports and they can't because they are not the owner.
So we need to switch this owner. Problem is the only way we can find to do this is to copy the report to a new name and delete the old one. This is very time consuming. Also many of our users are not priviledged to delete reports that they don't own. Therefore our administrators are the only ones that can do the delete step.
It seems like I should be able to logon to the system as 'Administrator' and change the owner of the reports (similiar to doing a chown command in Unix) to whoever I want. There however doesn't appear to be a way to do that in Infoview or the Central Management Consule.
Is there a simple easy way to do this?? I have thousands of report to change.
Thanks BartIt's possible via the Enterprise SDK, if you have a Java or .NET programmer.
Sincerely,
Ted Ueda -
Change the transport request number
HI All,
One of my program in porduction we done few modifications to that program one month back that is still in QAS,again we done few more modifications to the same program so now I have 2 request numbers due to few problem here my client don't want to move to PRD the TR number that I created one month back he is asking me to create new TR number,but my problem is after that TR I already created one more TR that is also in QAS,if I create again a TR is it will have modifications that I done in two earlier requests,any one please suggest me.
Thanks and regds,
Sree.Hi Sree,
If i am not wrong, you are having below doubt :
1. You have done some modification which u transported to quality. Transport No A.
2. You have done some new changes which u record into another transport request. Transport No B.
If its a workbench request, then no need to worry, you can transport request no B only to PROD.
But if its a customize request, the u have to include Transport A contents to Transport B.
Thanks
Piyush -
Released the Transport Request which is in Local Change Request
Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
KarthikHello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe -
How to change Transport request into local object $temp.?
Hi experts,
I would like to know to how to change a Transport request into and local object.
I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
Please put our valuable inputs.
Thanks in advance.
Regards,
DubbuGo To that Infopackage ,
Extras Menu----Object catalog entry. There you can change package name.
or
In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
Regards,
Srikanth
Edited by: srikanth on Feb 19, 2009 2:26 PM
Edited by: srikanth on Feb 19, 2009 2:27 PM -
How to change transport Request of an Object
Hi all,
I had assigned a transport request for an object (DTP) in transport organizer. Now i need to put this object in a different transport Request number. Is this possible? If so can someone suggest me how to do this?
Thanks
MaddyDelete the DTP.
Add the DTP to the new request - You can do this in SE03 or Transport Connection.
Or
Merge Requests using Context Menu on the Request.
Or
Open the DTP - Extras ( ? ) _ Object Direct Entry - Click on Change - Assign it to a new request. - You have to delete the DTP/Unlock it from the earlier request. -
How to change the name of a Box Object in Crystal Reports 2008
I am trying to change the name of a box object in a crystal report - 2008. This report was originally developed by consultants and requires that certain boxes be named according to a specific naming convention. I am making a change to the report and need to add a box with a name that matches the naming convention. This is so some program functionality will work for the new box. I can't contact the consultants because they don't work with our company anymore.
Does anybody have any ideas? I've tried 'Format Box', but it won't let me change the name from there. I also tried it in the Report Explorer but to no avail.
Thanks,
JoanneHi Joanne,
Boxes do not actually have a 'name'. When you add a Box in a report, it will be called 'Box 1' by default. And the only place this name is visible is under the Report Explorer.
Or do you mean to say 'Text Object'?
-Abhilash -
Crystal Reports - Saving and the transport request screen
Good morning BI people,
Has anyone had this annoyance?
You are creating a Crystal report(2008 v12.2.7.598) with connection to sap bi(7.01) and when you save, the transport request screen doesn't come up front of crystal reports, it is created behide the screen. so, you sit and look at the hour glass for 5 mins, move on to other things, and then you realize that the transport screen is behide the crystal reports screen. and, it is not like you can minimize the crystal screen. you have to minimize all your screens and then click on the crystal screen from you tool bar and then, the transport screen comes up.
anyone have a fix for this?
or am i alone....
thx,
ErikHi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
How to find multiple transport requests for one object
Hi all,
Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
I need to develop a report , which will takes a single Task number as input and gets the Request number from table E070.
Based on that Request Number i will fetch remaining Task numbers under it.
Then for all the Tasks Numbers, i am fetching their objects by using table E071.
I need to list out whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
I tried the following FM's , but not able to get the solution.
SVRS_DISPLAY_VERSION_LIST
SVRS_GET_VERSION_DIRECTORY_46
SVRS_GATHER_REQUEST_FRAGS
Thanks..Hello
I have tried with below code
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
TABLES
listobject = list_tab.
ENDIF.
break-point.
Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
Please try some other options
Thanks -
Program to Track the Transport Request
Hi Experts,
I got a requirement to write a program which can track and compare the Transport Request between the servers(Development ,Test and Production) .
If in case is there any descrepancy between the versions (In the server) it should throw an error saying that particular thing is missing or not synchronized.
For ex: If the program which is in Development server has some structure dependent to the code which is address to single TR.
where as same version of the program in Test don't have structure ,it has to throw an mismatch error.
If you guys have any clue on this please throw some light.
Higher points will be rewarded for every useful inputs.
Thanks in Advance,
DharaniHi Dharani,
Some sample Code. This I got debugging the SAP Standard.
TYPE-POOLS: strhi.
Data varaints for remote compare
INCLUDE rvscdcom.
INCLUDE rsvcutct. "Utilities, Constants, Types
INCLUDE rsvcvcct. "General Constants Types
INCLUDE rsvcvdct. "VRSD Constants Types
INCLUDE rsvctrct. "Tables for transports details
INCLUDE rsvcditd.
INCLUDE ole2incl.
DATA: application TYPE ole2_object.
DATA: remote_info_line LIKE abaptext-line,
remote_info_line_a LIKE vrsinfolna,
remote_info_line_b LIKE vrsinfolnb,
remote_versno LIKE vrsd-versno,
remote_objname LIKE vrsd-objname,
remote_objtype LIKE vrsd-objtype,
remote_system LIKE tadir-srcsystem,
returncode LIKE sy-subrc.
DATA: srcsys LIKE tadir-srcsystem,
author LIKE tadir-author,
mslang LIKE tadir-masterlang,
devcla LIKE tadir-devclass,
notfnd LIKE bool.
INCLUDE rsvceudb.
INCLUDE rsvcvdtd. "VRSD Constants Types
INCLUDE rsvctrtd. "Tables for transports details
INCLUDE rsvctrfo. "Interface for transport details
INCLUDE rsvcrmck. "Remote Access Utilities: Checks
PERFORM get_rfc_destination USING srcsys
CHANGING w_destination1.
SELECT SINGLE objname objtype korrnum FROM vrsd
INTO CORRESPONDING FIELDS OF it_transports
WHERE objname = it_abap_hdr-obj_name
AND objtype = it_abap_hdr-object
AND versno = '00000'.
it_transports-trkorr = it_transports-korrnum.
Open tranport number with object name
SELECT SINGLE trkorr pgmid object obj_name FROM e071
INTO CORRESPONDING FIELDS OF it_transports
WHERE trkorr = it_transports-trkorr
WHERE trkorr NE 'SW3_P00001'
WHERE pgmid EQ it_abap_hdr-pgmid
AND object EQ it_abap_hdr-object
AND obj_name EQ it_abap_hdr-name
AND lockflag EQ 'X'.
Open tranport number with object name
SELECT SINGLE as4user as4date FROM e070
INTO CORRESPONDING FIELDS OF it_transports
WHERE trkorr = it_transports-trkorr.
Remote compare
IF p_rcomp = 'X'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Remote Comparison started'.
IF w_destination1 NE space.
PERFORM remote_compare USING w_destination1.
IF it_transports-korrnum EQ it_transports-trkorr.
it_abap_hdr-in_qa = 'Same version'.
ELSEIF it_transports-korrnum IS INITIAL.
it_abap_hdr-in_qa = 'Not found'.
ELSE.
it_abap_hdr-in_qa = 'Not Same version'.
ENDIF.
MODIFY it_abap_hdr.
ENDIF.
FORM get_rfc_destination USING pi_orgsys
CHANGING po_destination.
Baustein zur Auswahl von R/3-Destinationen.
FUNKTION(EN):
ruft einen FB, der den Anwender eine Destination für den
Aufruf der Versionsverwaltung als REMOTE-Function-Call
auswählen läßt.
Parameter:
PI_ORGSYS LIKE TADIR-SRCSYSTEM
PO_DESTINATION LIKE RFCDES-DESTINATION
DATA: dest_note(60). " für STRA Baustein
IF pi_orgsys = space.
po_destination = space.
dest_note = space.
ELSE.
IF pi_orgsys <> sy-sysid.
po_destination = pi_orgsys.
ENDIF.
CONCATENATE
'Note: The original system of the object is the system'(l11)
pi_orgsys INTO dest_note SEPARATED BY space.
CONCATENATE dest_note '.' INTO dest_note.
ENDIF.
CALL FUNCTION 'SVRS_GET_RFC_DESTINATION'
EXPORTING
p_text = dest_note
IMPORTING
remote_dest = po_destination
EXCEPTIONS
no_destination = 1
OTHERS = 2.
IF sy-subrc <> 0.
Falls keine Destination ausgewählt wurde:
po_destination = space.
ENDIF.
ENDFORM. "get_rfc_destination
INCLUDE LSVRLF07 *
FORM get_version_list_remote USING pi_objtype pi_objname
CHANGING po_no_entry.
DATA: old_state LIKE bool.
REFRESH: vrs_dir_vrs, logvers_dir.
PERFORM check_vc_state_remote CHANGING old_state.
IF old_state = true.
PERFORM get_old_fashioned_versdir USING pi_objtype pi_objname
CHANGING po_no_entry.
ELSE.
CALL FUNCTION 'SVRS_GET_VERSION_DIRECTORY_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
TABLES
version_list = vrs_dir_vrs
lversno_list = logvers_dir
EXCEPTIONS
no_entry = 1
system_failure = 2
communication_failure_ = 3.
CASE sy-subrc.
WHEN 0.
po_no_entry = false.
WHEN 1.
po_no_entry = true.
WHEN 2.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 3.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
ENDIF.
ENDFORM. "get_version_list_remote
FORM CHECK_VC_STATE_REMOTE *
FORM check_vc_state_remote CHANGING po_old_state.
DATA: head_entry LIKE vrsd.
PERFORM get_vrsd_entry_remote
USING head_type head_objname head_versno
CHANGING head_entry po_old_state.
ENDFORM. "check_vc_state_remote
FORM GET_VRSD_ENTRY_REMOTE *
FORM get_vrsd_entry_remote USING pi_objtype pi_objname pi_versno
CHANGING vrsd_entry po_no_entry.
CALL FUNCTION 'GET_VRSD_ENTRY_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
versno = pi_versno
IMPORTING
vrsd_entry = vrsd_entry
EXCEPTIONS
no_entry_found = 1
system_failure = 2
communication_failure = 3.
CASE sy-subrc.
WHEN 0.
po_no_entry = false.
WHEN 1.
po_no_entry = true.
WHEN 2.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 3.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
ENDFORM. "get_vrsd_entry_remote
FORM GET_OLD_FASHIONED_VERSDIR *
--> PI_OBJTYPE *
--> PI_OBJNAME *
--> PO_NO_ENTRY *
FORM get_old_fashioned_versdir USING pi_objtype pi_objname
CHANGING po_no_entry.
DATA: vrsd_entry LIKE vrsd.
DATA: object_not_found LIKE bool.
PERFORM get_vrsd_entry_remote
USING pi_objtype pi_objname null_versno
CHANGING buffer0 po_no_entry.
IF po_no_entry = false.
CALL FUNCTION 'GET_VERSION_LIST_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
TABLES
version_list = vrs_dir_vrs
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
SORT vrs_dir_vrs DESCENDING BY versno.
LOOP AT vrs_dir_vrs.
logvers_dir-versno = vrs_dir_vrs-versno.
APPEND logvers_dir.
ENDLOOP.
READ TABLE vrs_dir_vrs INDEX 1.
IF vrs_dir_vrs-versmode = impt_mode.
Es gibt einen offenen Import, setze Flag zurück:
vrs_dir_vrs-versmode = corr_mode.
ENDIF.
vrs_dir_vrs-versno = 0.
MODIFY vrs_dir_vrs INDEX 1.
ENDIF.
vrsd_entry = buffer0.
PERFORM add_active_version_remote
CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
po_no_entry = false.
ENDIF.
Möglicherweise gibt es eine überarbeitete Version.
PERFORM add_modif_version_remote
CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
po_no_entry = false.
ENDIF.
ENDFORM. "get_old_fashioned_versdir
FORM ADD_ACTIVE_VERSION_REMOTE *
--> VRSD_INFO *
--> PO_NOT_FOUND *
FORM add_active_version_remote CHANGING vrsd_info STRUCTURE vrsd
po_not_found.
DATA: object_not_found LIKE vrsd-versmode.
DATA: nplus1 LIKE vrsd-versno.
DATA: retcode LIKE bool.
CALL FUNCTION 'FIND_OBJECT_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
object_not_found = object_not_found
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE. " SY-SUBRC.
IF object_not_found = space.
po_not_found = false.
ELSE.
po_not_found = true.
ENDIF.
CLEAR: vrsd_info-korrnum, vrsd_info-author,
vrsd_info-datum, vrsd_info-zeit.
IF po_not_found = false.
IF vrsd_info-versmode = impt_mode.
Es gibt einen offenen Import, und einen Satz n+1 der
uns verschwiegen wurde. Er beschreibt die aktive Version
nplus1 = vrsd_info-lastversno + 1.
PERFORM get_vrsd_entry_remote
USING vrsd_info-objtype vrsd_info-objname nplus1
CHANGING vrsd_info retcode.
ELSE.
PERFORM get_korrinfo_remote CHANGING vrsd_info.
ENDIF.
MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
vrs_dir_vrs-versno = null_versno.
logvers_dir-versno = acti_versno.
INSERT vrs_dir_vrs INDEX 1.
INSERT logvers_dir INDEX 1.
ENDIF.
ENDFORM. "add_active_version_remote
FORM ADD_MODIF_VERSION_REMOTE *
FORM add_modif_version_remote CHANGING vrsd_info STRUCTURE vrsd
po_not_found.
DATA: mod_dd_exists LIKE vrsd-versmode.
CALL FUNCTION 'TEST_MOD_DD_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
mod_dd_exists = mod_dd_exists
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
IF mod_dd_exists <> space.
po_not_found = false.
PERFORM get_korrinfo_remote CHANGING vrsd_info.
MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
vrs_dir_vrs-versno = modi_versno.
logvers_dir-versno = modi_versno.
INSERT vrs_dir_vrs INDEX 1.
INSERT logvers_dir INDEX 1.
ELSE.
po_not_found = true.
ENDIF.
ENDFORM. "add_modif_version_remote
FORM GET_KORRINFO_REMOTE *
FORM get_korrinfo_remote CHANGING vrsd_info STRUCTURE vrsd.
CALL FUNCTION 'GET_KORRNUM_AUTHOR_DATUM_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
author = vrsd_info-author
datum = vrsd_info-datum
korrnum = vrsd_info-korrnum
zeit = vrsd_info-zeit
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
IF vrsd_info-korrnum <> space.
Korrektur ist offen, Zeitstempel korrigieren:
vrsd_info-datum = sy-datum.
vrsd_info-zeit = sy-uzeit.
ENDIF.
ENDFORM. "get_korrinfo_remote
Maybe you are looking for
-
What is the diffrence between multicasting and broadcasting?
hi friends What is the diffrence between multicasting and broadcasting? i'm bit confused in multicasting and broadcasting.
-
Create Temporary Tables in a Package
In a package that I have I am trying to create a temp table. But when I try to alter the Package it gives me an error on the keyword CREATE. I am also unable to use the TRUNCATE Command. Has anyone ran into this problem and if so is there a work arou
-
i have a 6230i i use windows xp and i connect to the computer via usb cable. my problem is that i plug in the cable and pc suite reads it fine execpt i click on file manager and nothings in the folders (none of my things music photos etc)same with au
-
Select printer in Bartender labels printing with SAP Idocs
Hi Guru's. I'm using Bartender to print labels with SAP Idocs. The method is create a trigger with Bartender Commander and write Idoc format files in the path where the trigger is scanning. It works fine but the problem is that even prints in the s
-
Lightroom " Edit in" menu drop to work on Photoshop is grey out?
Lightroom " Edit in" menu drop to work on Photoshop is grey out, even though I have my "store preset with this catalog" unchecked. Do I have to reinstall LR?