Changing Thumbnails and Color after re-opening LR

Why does LR change each visible thumbnail along the bottom of the screen after, importing, then again after reopening of the program. Color Temp is set to "As Shot" but yet LR makes it a much cooler image thus changing the colors.
Has anyone else experienced this??

On a Mac, if you are not using a hardware calibrator, set the monitor profile to the default Color LCD, or do a "by-eye" calibration. Ian put up instructions for that here: http://computer-darkroom.com/colorsync-display/colorsync_1.htm . Contrary to windows machines, monitor profiles do not go bad on macs. You really really really should be calibrating using hardware however. Decent ones can be had for less than $100. To answer your original question. The color shift you are seeing initially is the subject of about 25% of the posts on this forum. What happens is that initially you see the embedded jpeg preview from your camera and after a short while, Lightroom replaces that with its own direct rendering from the RAW data. They simply represent different interpretations of what the camera sees. Usually the jpeg rendering done by the camera is more saturated and warmer than what Lightroom does in its default, rather boring rendering. Usually you have to work a little to get a great rendering out of Lightroom but you have amazing latitude. You don't have the latitude to do much with the jpeg from the camera anymore.

Similar Messages

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

How do I change font and colors back to default?

I have changed the font and color of the text through the tools button and the options button and the content tab. I find nothing telling me how to change the font and colors back to default font and colors. Can you advise me? I'm using Windows 7 Home Premium OS. Thanks.

Hi Brenda19605,
You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a&s=font&r=0&as=s
The default settings for the font are in this article:
https://support.mozilla.org/en-US/kb/Some%20text%20shows%20up%20bold%20after%20upgrade
Unfortunately for the default colors has no good reference. But for text it is black (most lower left) color, background is white (most upper left color). Unvisited links is blue (column 8, row 5) and visited link is purple (column 9, row 5).
Let me know if you need anymore help!
Lordfreak

How do I change to background color in the open tabs; currently grey with black text, hard to read.

In FF 4.0 can I change the background color of the open tabs. Currently it is grey with black type. A lighter background would be easier to read.
Thanks, TJH

Download this addon: https://addons.mozilla.org/en-us/firefox/addon/stratiform/ It allows you change the color of the tabs, plus many other options.

I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

Try asking in the Premiere Pro forum seems to be an Adobe Lab for Premiere Pro

Why I cannot change font and Color in JFrame title??

Dear sir:
I try to change font and Color in JFrame title in code below,
It display all html code, not expected formatted ones.
but fail. Looks like no way to do it??
Can somebody help??
Thanks
import java.awt.BorderLayout;
import java.awt.Toolkit;
import javax.swing.*;
public class JFrameTester {
public static void main(String[] args) {
     String iconPath ="file:C:/eclipse/workspace/Test/images/long.PNG";
     String title = "<html><body bgcolor=\"yellow\">" + "<img src=\""+iconPath+"\">" +
          " <font size=\"6\" face=\"Verdana\" color=\"red\"><b>"+ "New Tester" + "</b></font></html>";
    JFrame f = new JFrame(title);
    f.setIconImage(Toolkit.getDefaultToolkit().getImage("images/123.gif"));
    f.setSize(250, 250);
    f.setLocation(300,200);
    f.getContentPane().add(new BorderLayout().CENTER, new JTextArea(10, 40));
    f.setVisible(true);
}

Looks like no way to do it??depends on the L&F you want.
here's one way
import java.awt.*;
import javax.swing.*;
class JFrameTester {
public static void main(String[] args) {
    JFrame.setDefaultLookAndFeelDecorated(true);
    UIManager.put("activeCaption", new javax.swing.plaf.ColorUIResource(Color.RED));
    UIManager.put("activeCaptionText", new javax.swing.plaf.ColorUIResource(Color.YELLOW));
    String title = "Hello World";
    JFrame f = new JFrame(title);
    f.getLayeredPane().getComponent(1).setFont(new Font("Tall Paul",Font.ITALIC,24));
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.setSize(250, 250);
    f.setLocation(300,200);
    f.getContentPane().add(new BorderLayout().CENTER, new JTextArea(10, 40));
    f.setVisible(true);
}

Abrupt change of display-color after sleep

I POSTED THIS IN THE iMAC DISPLAY-SECTION OF DISCUSSIONS BUT NOBODY REPLIED:
After I wake up my iMac 27, after it was in sleep-mode
for some hours, colors look different for less then a second (warmer),
then it changes to something more cold/bluish. The change is exactly like
a manual change of the calibration/monitor-profile via settings.
There is NO blackscreen between the change of the colors,
like I said: exactly like a monitor-profile-switch.
I didn't change/add a different profile than the standard yet.
Is my monitor faulty and/or what's happening with it?
PS: I can't tell if the "less then a second visible"-profile is superior,
but i'd like to test it, if possible I installed all the latest updates.
But amongst them there wasn't that firmware update. Maybe
cause I CTO'ed the iMac a few weeks ago.

Haven't experienced this on my i5 iMac, but my monitor is hardware calibrated with a custom profile (first thing I did when I switched it on). I use the ColorMonki device.
I would recommend you hardware calibrate your monitor and see if the issue re-occurs. If it does contact Apple Tech Support for further advice

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

MacBook Pro makes a noise and freezes after I open the lid and awake it from it's sleep after installing Mt. Lion. How do I fix this?

Eversince I installed Mt. Lion my Macbook Pro has been making a long "beeeeeeep" noise and freezes after I try to awake it from it's sleep by opening the lid. How do I fix this problem?

Either the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

Program to change pa0002 and pa0006 after production copy

Hello Pls can some one give me code to change the info type pa0002 and pa0006 after system copy.
Regards
Meghana

Hi Meghana,
Can you elaborate about this requirement?
You can access PA0002 and PA0006 using SE16 but what do you need to change?
Arti

Hyperion web analysis can not change font and color

In Hyperion web analysis, when I want to set or change font, a null dialogbox appear ; when I click and want to set or change color, nothing happen,even no dialogbox appears. Why?
thanks advance!
Edited by: user1016218 on 2010-1-8 上午7:16

Hello,
See my answer in this link:
Urgently! In Hyperion web analysis font and color can not be changed
May be it helps.

Using GREP styles for changing characters and colors

Hello everybody,
I have a question regarding GREP styles. I wish to change each letter of an alphabet in text to a square in a different color. For example: every 'a' in the text change to a yellow ■. I thought GREP styles would be perfect for it so I went to find/change, typed in my requests and InDesign told me it has found no 'a' in my text, which isn't possible. How do I fix it? And the other thing- is it possible to change the color of ■ ? Because i couldn't find the option.
Please excuse me my incompetence, I am a new user of InDesign.
Thanks in advance for your help! : )

First off, it sounds like you want to use find/change with GREP, which is fine, rather than a GREP style, which is part of a paragraph style definition and cannot change the text in any way other than apply a character style to the found string, so would not help here.
The not finding the text makes me think you've limited the search parameters in some way, either by limiting the scope to a selection, or by including a style or format requirement in the find options, perhaps.
In order to do this, I think you are going to need to make use of the "other" category in the change dropdown and select Formatted Contents of Clipboard (which should clue you in that you need to make one of your colored squares and copy it to the clipboard before you run Find/Change). You can do this with either a plain text query or a GREP query, and there is no advantage to GREP in this case unless you want to match several different things and apply the same clipboard content to any of them.
You'll need to run a separate find/change for each colored square. It might be possible to script a chain so it runs in a single operation, but that would also require swapping the colored sqaures on the clipboard which complicates things in this case. You might want to ask over in scripting: InDesign Scripting

SQL Server Management Studio has stopped working when changing fonts and colors

I installed sql server management studio 2012 about 3 months ago to test drive and from time to time I'll attempt to change my background color of the TSql editor "In the fonts and colors option under tools"; however, the entire studio crashes
and restarts.
This has been ongoing since I first installed it 3 or 4 months ago, and have waited on posting to a fourm for help, assuming I am not the only one this is happening to I've waited for an update that might fix the issue.
I've got to start on some heavy scripting and that god awful white background kills my eyes. I've got to have a black background or my work day is cut off by about 3 hours becuase of strain.
What can I provide to someone that would help me with this?
Thank you,
Erik
Specialize in software for the construction industry.

Hello,
Could you please apply the following updates and let us know the results?
http://www.microsoft.com/en-us/download/details.aspx?id=35575
http://support.microsoft.com/kb/2790947
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Change title and category after published

I published an iBook.Days after I was able to upload modified content with ITunes Connect, but I can not change Title and Category of the iBook. I uploaded the new contents changing the title and category but new text is on line, title and category are always the same. There is a way to do this?

On Fri, 4 Apr 2008 06:21:15 +0000 (UTC), "mFlexDev"
<[email protected]> wrote:
> I have published a fla file in exe format .
> how can i change the title and image of this exe?
I beleave the easiest way is to use PEResourceExplorer,
Resource
Hacker or similar software to modify EXE resources, such as
window
title and window icon.

Regenerating thumbnails and previews after Time Machine restore

Hi there,
My Aperture library was recently corrupted and fixed only by completely restoring everything on my iMac using Time Machine. This seems to have worked insofar as my library is alive again. However, I'm unable to even USE Aperture due to it recreating all my thumbnails and previews. I currently have about 57,000 remaining and it's taking about 5 seconds to finish each one, all the while bogging Aperture down to the point of being unusable.
Is this to be expected? I understand that Time Machine doesn't save previews and thumbnails because Aperture can simply recreate them but at this pace, I'm looking at about a week of over 100% CPU usage. It just seems strange that its so slow.
Just to give some specs on my machine:
Intel Core i3
3.2 gHz
Dual Core
12 GB RAM
Any advice would be appreciated. I'm kinda stuck here.
Thanks,
Rick

Hey Mark,
I ultimately just scrapped Time Machine and started using SuperDuper cloner. I have been really pleased with it--much more user-friendly than TM in my opinion.
As far as working with Aperture, the rebuild process does take awhile but seems to be just the way it goes. The reason mine was taking so exceptionally long though was due to HDD failure, not anything inherently wrong with TM or Aperture.
Good luck!
Rick

Changing Thumbnails and Color after re-opening LR

Similar Messages

Maybe you are looking for