CHANGING TIMECODE FOR QT EXPORT?
Hey,
A closed captioning company just asked me if I could export them a QT from my fcp project file so that the timecode in the quicktime starts at hour 1.
I understand what they want, i'm just not sure how to do this.
Any help?
THANKS!!!!!
You can set this in the sequence settings for your project timeline.
Similar Messages
-
Setting the default Output Name for the Export Media dialog
In File | Export | Media the Export Settings always show the wrong Output Name, from a project I did several days ago. If I change it for this export, the wrong path just comes back again for the next export. I don't know how I accidently got it set for the earlier project. I don't see any way to set it. Could someone tell me where this is set? I'm running PrPro CS4.
Thanksdkeubnasoieng wrote:
I'd read earlier the update wasn't a good one so had avoided it. The
real frustration comes from not finding how I did it a couple months ago!
I do not know where you read that but there is nothing wrong with the update.
Here you will find the latest update.
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows -
Export and import change document for user master data
Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius -
It concerns adobe export pdf program. When we open this program, it appearsq on the right of the screen." recognize the text in english"but. we would like to change it for french language. Because when we export the document under word program , it uses english dictonnary to correct the text. thanks for your answer..
[topic moved from Developers to Acrobat.com forum]
-
FB4 - Can't change location for Export Release Build
FB4 on OSX
I changed the default location for the "Export Release Build", then I decided to change it back and still uses the previous location no matter what. Restated app, restarted computer, same results. ???Did you duplicate the preset and then try to change the copy? Or are you trying to change the original?
-DH -
Exporting Sequence Timecode for QT Movie - Not Working!
Hello,
I need to export a film I have been working on to a Quicktime file, but I need the QT film to keep the timecode in the sequence I have been working on. The film is going to a broadcaster in the UK, so I need the film to start at 10:00:00:00, with countdown leaders/colour bars appearing beforehand etc.
I have been trying to export a normal, self contained QT file (not using QT conversion) but every time I do, the QT film has a starting timecode of 0:00. I have adjusted the sequence settings so the timecode is appearing as it should in the FCP sequence. Am I doing something wrong or have I missed a step? Any help would be greatly appreciated!!
George
P.S. I can export to tape also, which I tried, again with no luck (TC starting at 0 again!) If any of you know of a method to export to tape while keeping the sequence TC please let me know!I'm using Final Cut Pro 7.0.2.
I'm checking the timecode of the exported file both by looking at the timeline at the bottom of the QT movie and by viewing the movie properties on QT. Both the video and audio tracks start at 0:00:00.
They haven't asked for burnt in TC (this means actually having a timecode display burnt onto the film itself right?). They they just want the film as either a data file or printed to tape with the timecode settings they specified. So far I have been unable to do either. -
How to find out Last Changed Fields for a line item of a PO
Dear All,
Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?Hello,
Check the table CDHDR,CDPOS for PO items,
Check this code:
REPORT ZV_GET_LATEST_SO .
DATA: BEGIN OF ITAB OCCURS 0,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
UTIME TYPE CDHDR-UTIME,
TCODE TYPE CDHDR-TCODE,
TABNAME TYPE CDPOS-TABNAME,
TABKEY TYPE CDPOS-TABKEY,
FNAME TYPE CDPOS-FNAME,
CHNGIND TYPE CDPOS-CHNGIND,
END OF ITAB.
TABLES: CDHDR,CDPOS.
DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
*REFRESH AUSG.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = '0000001784'. " Purchase order number
**SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
**B~TCODE
**B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
**INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
** A~OBJECTID = B~OBJECTID
** A~CHANGENR = B~CHANGENR
** WHERE OBJECTCLAS = 'VERKBELEG'
** AND OBJECTID = '0000001784'.
*SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
* AND OBJECTID = '0000001784'.
*IF NOT LT_CDPOS[] IS INITIAL.
* SELECT *
* INTO TABLE LT_CDHDR
* FROM CDHDR
* FOR ALL ENTRIES IN LT_CDPOS
* WHERE OBJECTCLAS = LT_CDPOS-OBJECTCLAS
* AND OBJECTID = LT_CDPOS-OBJECTID
* AND CHANGENR = LT_CDPOS-CHANGENR.
*ENDIF.
** SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
*LOOP AT ITAB.
* WRITE: ITAB-UDATE."ITAB-UNAME.
*ENDLOOP.
*--- Interne Tabellen -------------------------------------------------
DATA: BEGIN OF ICDSHW OCCURS 50. "Ausgabeaufbereitung
INCLUDE STRUCTURE CDSHW. "Zwischendatei
DATA: END OF ICDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = LT_CDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
LOOP AT LT_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
* ARCHIVE_HANDLE = 0
CHANGENUMBER = LT_CDHDR-CHANGENR
* TABLEKEY = '00000000 '
* TABLENAME = ' '
* IMPORTING
* HEADER =
TABLES
EDITPOS = ICDSHW
* EDITPOS_WITH_HEADER =
* EXCEPTIONS
* NO_POSITION_FOUND = 1
* WRONG_ACCESS_TO_ARCHIVE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ICDSHW.
IF ICDSHW-TABKEY+3(10) = '0000001784'
AND ICDSHW-TABKEY+13(6) = '000001'.
ENDIF.
ENDLOOP.
ENDLOOP.
Vasanth -
Table cntrol field to be display/Change only For each record
Hi all,
How to set a particular Field in table control either as display only or
change only for <b>each row</b> based on certain condition.I need to set this property for each record in table control not for the entire coloumn?.I know the procedure for setting up an entire coloumn in table control either as diplay or change only using <b>Loop at screen</b> statement.
Conditions:
If Material is batch managed:
itab-batch field has to be <b>Display only</b> mode.
if material is not batch managed:
itab-batch field has to be <b>change mode</b>.
<b>O/p of Table Control :</b>
Material Batch
1000 Display only
2000 Change only
8000 Change only
3500 Display only
3600 Display onlyHi Ravi,
Thanks for your reply.I have put the code as u said. It is modifying the whole coloumn insted of modifying Current row of the coloumn.
I have tried to modify the screen property using Table control attributes (TC-COLS).The following commented code is that logic.Even that also doing the same thing.Can yoy please tell me how to do it.
MODULE tc_get_lines OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'X_ZPINV-CHARG'.
IF fg_batch = ' '.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT tc-cols INTO tc_wa
WHERE screen-name = 'X_ZPINV-CHARG'.
IF x_zpinv-matnr IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_zpinv-matnr
IMPORTING
output = v_matnr.
SELECT SINGLE * FROM marc WHERE matnr = v_matnr
AND werks = w_plant.
IF marc-xchar IS INITIAL.
tc_wa-screen-input = 0.
ELSE.
tc_wa-screen-input = 1.
ENDIF.
MODIFY tc-cols FROM tc_wa INDEX sy-tabix." transporting screen-input
ENDIF.
ENDLOOP.
ENDMODULE. "TC_GET_LINES OUTPUT -
How to preset the filename for an exported file?
Post Author: yekken83
CA Forum: General
Hi all,
Generally, the exported file name will defaulted to report name. However, anyone know that can i change the exported file name to another specific file name which different as my report name? The exported file naming as following:- Let said i would like to export my report (dailyreport.rpt) into excel file and the exported file name as below:- dailyreport_<Report_Run_Date>.xls **<Report_Run_Date> will be a field which is retrieve from my stored procedure.Post Author: pvierheilig
CA Forum: General
Hello,
If you've not already solved this, let me ask a couple q's:
What tool are you running this report through for the export (it sounds like you're wanting to automate the process)?
Is it Business Object XI or Crystal Enterprise or simply manually exporting it using the CR designer program or...? -
In Lightroom 4, is it possible to change the resolution when exporting to Facebook?
Is it possible to change the resolution when exporting a photo to Facebook using either the regular plugin or Jeffrey Friedl's plugin? I can't seem to do it; I only have control over the image dimensions, not the resolution and the dimensions, as you can see in the screen shots below:
I have control over both when I export to my hard drive (or a flash drive, etc.), as you can see below:
I can't find the option to control the resolution when I try to export to Facebook. Before I got Lightroom 4, I would create whole new low-resolution files of images I wanted to post online using Photoshop. The image size settings I would use are a longest edge of 10 inches at 72ppi, and I would like to continue doing this. If I can only set the longest side to 720 pixels (I can't even seem to set the longest edge to an inches value - I can only choose a pixels value) and not change the resolution from 300ppi to 72ppi, then my photos' longest edge will only be less than 3 inches long (right?). Thus, I really want to be able to upload low-resolution photos to Facebook via Lightroom with the ability to change both the resolution and the image dimensions. Any idea how to do it without having to export to my hard drive first? Thanks!Rob Cole wrote:
I'd be inclined to set it to zero so it obviously doesn't mean anything
You can set it to whatever you like, and it makes no difference. Most of the time (depending on how you saved it), it will still open as "72".
When you save an image for web, the resolution is usually stripped from the file. It's simply not there anymore. That's probably what happens in the Lr facebook module, and that's why there's no entry for it.
But when you open that image somewhere else, that default of 72 ppi is assigned. Most apps need to know what to do with a file if asked to print it out. So there is a default, and that's usually 72, mostly by convention. With that default ppi, it prints out at a comparable size to what you see on screen at 1:1 display.
And when people see that, they think "hey, web images are 72 ppi". But they're not - that figure is just inserted there by the opening application. -
Option for MAPI export destination missing in CRViewer
We have an application developed in C++ which includes the Crystal Reports XI RDC and previewer component.
The application is installed at a customer on a Windows Server 2003 machine. Users are working in Terminal sessions connected via Remotedesktop.
For all user accounts the CR report component in our application is working fine, especially they are all able to send documents using the MAPI option in the previewer's export function. Outlook Express is configured as the default mail handler.
There is one exception: One user doesn't have the MAPI option in the export dialogue box. We checked user rights and MAPI configuration: all seems to be the same like for the other users. Especially he also has Outlook Express as default mail client and it is possible to send documents via MAPI out of other applications (for instance the "Send..." menu item in MS Paint).
We investigated the situation with Process Explorer and found out that the "u2dmapi.dll" is not loaded when the report is opened in our application - in contrast to all other users. All other export format and destination options seem to be available for this user (and the corresponding DLLs are loaded by the application). So we believe the issue is related to the u2dmapi.dll which is not loaded.
What can be the reason? Any hint to find a solution is very appreciated!
Thanks in advance!Here are some results of my "ProcessMonitor-Session". I took a look what happens when I open the export dialogue in the CR previewer under two different accounts - one account where the MAPI option is available and the account of the user who doesn't have the option.
1) There seems to be no difference when CR is browsing for the export DLLs: There is a "QueryDirectory" in the folder "C:\Program Files\Common Files\Business Objects\3.0\bin" with filter "u2d*.dll" and under both accounts the query finds the "u2dmapi.dll". So I'm guessing there is not really a problem with that DLL or its location.
2) The only difference I saw (it's hard to compare all messages line by line because I got more than 3200 event messages only for opening a single modal dialogue): CR is also querying for the "win.ini" file in the user's homepath folder which is on another shared network server. Now I found out that the user with problems has no access to this folder while the other users have access to their respective home folders. (CR queries for "
server\users1\username\WINDOWS\win.ini".) Consequently due to the missing access rights Proc.Mon. says "PATH NOT FOUND".
I remember that the "win.ini" has an entry whether MAPI is enabled ("MAPI=1") or not. Is it possible CR assumes by default that MAPI is disabled in case it doesn't find the "win.ini" and therefore doesn't offer the MAPI option in the export dialogue? (On the other hand there is also a query for "c:\windows\win.ini" on both user accounts and this win.ini has the "MAPI=1" entry, but maybe the win.ini in the homepath has higher priority or whatever ???. In the end it's the only difference I can see so far.) Perhaps CR behaves here not the same way like other applications because - as I said in the first post - mailing via MAPI is possible at least out of MS Paint.
But well, that's a lot of hypothesis and perhaps the problem has nothing to do with the missing access rights to the home path. Anyway, I've asked now the server administrators of the company to configure the account of that user the same way like the other user accounts, especially to give him access rights to his own home path (crazy setup...). I'll come back with the results after they changed it (which can mean... next year... ah no... there are always exceptions from the rule and I always hope for them ) -
How to tace the change no for a certain BOM?
I have a BOM(bill of material).and from time to time,engineer like to change the BOM by using "Change Number" ,so it is clear in the menu of T.C cs03, you can find the "change no.",but this T.C is only down to the second lower level and not down to the lowest level,
For me, I want to export the whole BOM out and with change no. attached,then I can trace all change no. for this BOM
Any advices are welcome
helaiDear helai,
Your question is not clear,can you please clearly explain what are you looking in using Change number?
1.Using a Change number you can make BOM changes at single level in CS02.
2.Same Change number can be used for making various material's BOM changes.
3.If it's a Change number with release key,once if the release key is set for the change number ,then that
change number cannot be used for making any BOM changes.
4.Before setting the release key you can use the same change number for various BOM corrections.
5.For reports check using T codes CC04,CC05,CC07.
Please check & revert back if you need any further assistance.
Regards
Mangalraj.S -
Change documents for Classification View
Hi,
Can anyone please tell me how to activate Change documents for the Classification view of material master. if we activate that one what will be consequences?
Thanks in adavanceCHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
->CREATE CHARACTERISTIC USING TCODE CT04
->CREATE CLASS USING TCODE CL01 .
-> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
OBJECTKEY = P_MATNR.
OBJECTTABLE = 'MARA'.
CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = OBJECTKEY
OBJECTTABLE = OBJECTTABLE
CLASSNUM = CLASSNUM
CLASSTYPE = CLASSTYPE
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
RETURN = RETURN
LOOP AT RETURN.
WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
BY VENKAT -
Save for web export crashing photoshop
HI
In was wondering if anyone could help me. I have written a code that edits images but i am having trouble with the save for web export everytime it gets to saving it photoshop just crashes. I have tried a few different ways of coding it but all of them end of crashing PS and i am at a loss as to what is wrong.
Here is the code that i am using:
set webFolder to (choose folder with prompt "Select the folder to link to")
set webOpt to {class:save for web export options, web format:JPEG, quality:89}
set theDoc to current document
export theDoc in webFolder as save for web with options webOpt
any help would be great. I have tried it on CS6 and CC, both of which crash.You need to pass a full file path to the export command… Probably need to change the extension too.
set myFullFilePath to (path to desktop as text) & docName
export in file myFullFilePath as save for web with options myOptions -
Hi all.
In BI 7.0, after executing a query, I can download the results to Excel and the description of my query name shows as the first row in the Excel sheet.
When I use this query in a template that also uses the tab item, the data is dumped to Excel but the name of my query does not show. I have tried changing the Export command parameters to have a header but that seems to only apply to PDF downloads.
I've considered putting in a label item (or something similar) with the title in it, to download to excel with the data, but I'd rather not if there is a simpler soultion.
Thanks for your help.
JeffHi Jeff,
when you execute a query from Query Designer, the web Template 0ANALYSIS_PATTERN is used. If you lookup the button group parameters there, you could see what and how it is exported to excel.
So, you have to add a text item to your web template and bind the text content to the query title. Then it will be exported to excel.
The parameters according headers, page format etc. is not used for Excel export.
Look up [note 1178857|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=1178857].
Best regards
Arne
Maybe you are looking for
-
After updating to PS CS6 I lost the "filter Gallery" option in Filters
After updating ps cs3 to ps cs6, I lost the "filter Gallery option in filters does anyone know why?
-
Problem while writing BDC Code......
Hi All, I am writing a BDC Code to call transaction: PRFI. Ones the transaction is run(from GUI directly) for a particular trip number, the status of the trip gets changed to Docs Created. On the other hand while doing the same using the BDC method,
-
Restrict billing date in past in transaction vf11
Restrict billing date in past in transaction vf11 My requirement is cancel billing date should be in current date in vf11 debajyotikar
-
Has anybody ever succeeded in merging more than one telephone number in one letterhead (or similar)? If I try to merge work phone and mobile phone into a letter head (and yes both fields are filled in the Address Book card) I either get the work phon
-
JavaSE6 update 24 doesn't respond when clicking on link, using FF4.
When clicking on a link in a web page that calls java, nothing happens. Using Windows 7.