Changing track from left to right speaker

I recently acquired a Macbook with Garageband '09. I made a recording with two mics, one recording a guitar, and one recording a drum kit (They were both recorded at once on the same track). Since I had set the input to stereo, the guitar (mic 1) played through the left speaker, and the drums (mic 2) played through the right speaker. I would like to have mono sound, but I still want to use two mics to provide better clarity and prevent spill.
Is there a way to keep the track I have (guitar=left/drums=right) and perhaps duplicate it and switch channels from left to right creating a mono sound? Basically one track would be guitar=left/drums=right and the other would be guitar=right/drums=left. Or is there perhaps a way to switch a stereo recording to mono once recorded?

I would like to make a track mono, but do not see where in the "pane" I can do that. The only option I have found is to change the input from stereo to mono. Since I have audio that is already recorded, and is unfortunately only on the left track, is there a way to get the mix down to be mono so that I'm getting the audio in both speakers?

Similar Messages

Switch audio tracks from left to right

Is it possible to take the left audio track and put in on the right track?
I have a clip that only has audio on the left track. I cannot recapture. So, I want to know if I duplicate the audio and then on the duplicate switch the left and right. I know that this is less than the ideal solution, but quality is not the most important thing at this point. Thanks before hand.

To the OP ... Individual mono tracks can be panned full right or full left - which controls which stereo speaker reproduces the material. If your audio is playing only out of the left speaker (-1), and you want it to play out of both, panning to center (0) will accomplish what you want.
Duplicating a mono track and panning one track full left and the other full right will do the same thing as one track panned center as both speakers are playing the exact same material. Creating two tracks of the same material panned left and right does not create stereo as there is no stereo separation.
Or did I misunderstand your question?
x

How to change the direction of movement in atable from left to right?

As the title says i want to change the movement direction in the cells of a table in pages when i click tab key from "left to right" to "right to left", is that possible?

It seams that we aren't using the same application.
In mine, if the cell C3 is selected, pressing shift + tab select the cell B3 which is what you wanted in your original post (or I understood it wrongly).
If what you want is the ability to insert a new row above the current one or at top of a table, you can't do that this way.
Same response if you want to insert a new column to the left of the table.
To do that, the soluce is to select the top row or the leftmost column.
There is a funny bug in the menu items.
If your table has a header row, entering the menu Format > Table, we get four items:
Insert new header above
Insert new header below
if we are in the header row
or
Insert new row above
Insert new row below
Insert a column before
Insert a column after
These four menus items have shortcuts :
option up arrow
option down arrow
option left arrow
option right arrow
If the table has no header, the menu items are :
Insert new row above
Insert new row below
Insert a column before
Insert a column after
None of them display a shortcut *_but the shortcuts are active_*
Yvan KOENIG (VALLAURIS, France) samedi 11 septembre 2010 23:52:27

While using ibooks how to change page swipe from left to right vs top to bottom

Somehow I changed a setting in my Ibooks to change page by scrolling from top to bottom of the screen. I want to have page turn by moving from left to right. I am using iPhone with operating 7. whatever is out at this day and time. Can anyone help? Thanks
Celestesyorkies.

tap the AA symbol at the top, the one for resizing text.
It will show a slider for brightness, font size, page colour, and on the bottom "scrolling view" off and on.
When the scrolling view is "on" (green) the book is read with a vertical slider and scrolling up and down.
When the scrolling view is "off" (no colour) the pages are changed by swiping left to right or right to left.

Changing directions for the Horizontal slideshow from left to right or right to left?

Hi,
How do I change directions for the Horizontal slideshow from left to right or right to left?
Thanks,
Jay

I am also in need of help with this issue. Also it would be nice to have vertical slideshows coming from upwards to downwards.
A script override may solve the issue perhaps. Any help would be appriciated.

My screen displays a shadow from left to right, being darker on the left and brighter on the right. Any advice about how to change this would be appreciated.

My screen from the moment it starts any program appears to be shaded from left to right. The left hand side of the display appears to be darker than the right half of the screen. Can someone please advise what I can do to alter this. Have I pressed something I shouldn,t have? Or is there a problem with my display?
Any help would be appreciated.
Many thanks.

Does not sound too healthy! You should take it to the Genius bar in the Apple store. May need the hardware looked at...
It's most probably a backlight issue. Take some piccys of it while it isnt working now!!

HT3209 low resolution videos playback with lines from left to right

When I play HD video's (720p) they play properly and just fine, when i play lower resolution videos (480) i see lines that run across from left to right in the middle of the screen, I can't find any settings to change to prevent that from happening. I would think if it was a computer problem it would have more trouble with the HD content than the SD content.
Does anyone know how to handle this?
Dell 2.0Ghz processor with 2Gb of RAM
Issue is only noticeable on SD videos (480p)

When I play HD video's (720p) they play properly and just fine, when i play lower resolution videos (480) i see lines that run across from left to right in the middle of the screen, I can't find any settings to change to prevent that from happening. I would think if it was a computer problem it would have more trouble with the HD content than the SD content.
Does anyone know how to handle this?
Dell 2.0Ghz processor with 2Gb of RAM
Issue is only noticeable on SD videos (480p)

Plotting Data on a fixed time axis from left to right

I am plotting data on a Historical Trend graph from the DSC palette. I receive the data from a plc throughout the course of a production shift. I would like to have the start time of the shift (07:00) on the far left of the x-axis and the end time of the shift on the far right (15:30). I would like to plot the data from left to right as the shift progresses. Is this possible? How do I format?
Many thanks for any input,
Stuart Wilson

Hi Stuart,
All you need to do is place down a waveform chart and then modify the properties slightly in order to achieve this. If you right click and make sure autoscaling is turned off on the x-axis first of all, then go into the properties page and change the x-axis formatting to absolute time then you will be able to plot data with the actual time according to your system clock.
The only problem you have now is that there probably isn't enough room on the chart to plot data for the entire time between 09:00 and 15:30 depending on how often you want to sample. The default number of data points to keep in the chart is 1024. Therefore if you try and change the max and min values to 09:00 and 15:30 then it won't allow you to set that up as it doesn't think you have enough room there. Right click on the chart again and go down to Chart History Length. Increase this number to a large enough number and then you will be able to set the start time to 09:00 and the end time to 15:30 and as long as autoscaling is turned off this will not change.
Hope this helps, please find the attached example which will plot random numbers to a chart once a minute and the chart will plot data between these times.
Best regards,
Peter H.
Applications Engineer.
NIUK.
Attachments:
Large Chart.vi ‏16 KB

Converting 11 digit value into 18 digit value by filling from left to right

Hello Experts,
I'm a newbie in ABAP-coding. I didn't found anything in the forum, so I'm sure somebody could give a little help. I would like to concatenate value into field name "mat". The input length is 11 the output length should be 18. Could you please look at the code belove:
data: c1(7) value '10000002',
      c2(3) value '001',
      c3(1) value '0',
      mat type /BI0/OIMATERIAL.
CONCATENATE c1 c2 c3 into mat.
write mat.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT     = mat
IMPORTING
   OUTPUT     = mat.
But is not giving me the correct result. I've defined a field "mat" which has the same proerty as 0MATERIAL and length = 18.
After concatenating values into mat, the result should be 10000002001 (length = 11).
But I would like the result to be showing from left to right in this way: 000000010000002001 (length = 18)
Could somebody tell where the problem could be?
Many Thanks
Mamadou

The probelm appears to be with
mat type /BI0/OIMATERIAL.
I changed it to
MAT(18)
and got
000000010000000010
Rob

Type on a path that gradually increases in size from left to right

I need to create type on a path where the characters gradually increase in size from left to right. I know that I can manually change the size of each character, but does anyone know of an easier way to do this -- possibly with a script?

This previous discussion might prove useful:
http://forums.adobe.com/message/1275493#1275493
The link to the script mentioned in the above thread is broken, but this one should work:
http://forums.adobe.com/message/1258988#1258988

Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb. Ideally, I would like to show both images and text. I am actually using iWeb '09. I am not opposed to writing html code if necessary.
Thank you for your help!

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

The pictures running from left to right.

Hi,
Somtimes I start the TV and the frames running from left to right. and when it happand there is no sound.
Can somene help me about it.
Thank you,
Mike

This video shows after the change
http://www.youtube.com/watch?v=1TmmzJA7kuI&feature=youtu.be

I need to know how to delete downloaded videos and movies from iTunes when the instructions on the support page does not work. I have swiped the selections from left to right on the phone and nothing happens.

Hello.
I need help deleting videos, tv shows, and movies downloaded from itunes. I have followed the instructions to delete from the macbook, I selected the videos I wanted to delete and right clicked to delete. Nothing happens. When I double click on the video it still starts playing. I also followed the instructions to delete the videos from the iphone by swiping from left to right with nothing happening. I opened the videos on the ipad and there is no edit selection like in the instructions on the support page. Can you please tell me how to permanently remove this content so it doesn't try to copy from each device when I want to back up the Iphone and Ipad to my macbook. Thank you.

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Why does my Menu Bar is scrolling from left to right when I call it and not stabilizing?

I have an an XP Windows system and I use Firefox as my default Browser, I suddenly found that my browaer is hit by something that makes the Menu Bar when I try to use it scrolling all menus from left to right so quickly that I can't point to any choice and keep doing this till I end it by mouse, also the information in the Autocomplete are not accessible as they don't show when trying to get them either by mouse or by the down key. I don.t know what to do putting in consideration that I uninstalled firefox and reinstalled it and this did not solve the problem.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Changing track from left to right speaker

Similar Messages

Maybe you are looking for