Changing Unix file attributes in target host
Hello,
I need to transmit a file from a SAP server to a target host in Unix.
Actually the transmission is OK. I'm using the SAPFTP program.
Now, my problem is that in the new file on the target system (in Unix) I need to change the file permissons to 777.
The FM FTP_COMMAND doesn't work because the command chmod is not available through ftp. If I use this, I receipt the message "502 SITE command is not implemented".
Somebody have another idea to change the Unix file attributes in a remote way from ABAP?
Best regards!
Hi Roberto,
Look at the below BLOG, this explaines about the Commands which we use in FTP ..
/people/thomas.jung3/blog/2004/11/15/performing-ftp-commands-from-abap
Regards
Sudheer
Similar Messages
-
How to change only one attribute at the host
Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
ChrisNo, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute. -
Change UNIX file permitions using ABAP
Hello,
I create a file using the open and close dataset statements and the file has the following permitions:
-rw-rw----
Now i whant to send the file using FTP to another server, but function module FTP_COPY return the error:
Permission denied
Is that possible to change the file permition on the file creation or after?
Kind regards
Rui Almeida
Message was edited by: Rui AlmeidaYes , you can chnage, are you the owner of the file, then it can be done.
i can tell you the simple way to do that.
REPORT ZUNIX line-size 400
no standard page heading.
data: unixcom like rlgrap-filename.
"7 full perimission to read
"7 full permission to change
"7 full permission to delete
<b>unixcom = 'CHMOD 777 fillfullpath'.</b>
data: begin of tabl occurs 500,
line(400),
end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
in the above code provide fullpath of the file.
Regards
vijay -
Same file name at Target with change in file extension
Hi,
I am working on File to File scenario. I need to create target file name similar to the source file name. This can be achieved by using ASMA. But my requirement is to change the file extension for the target file.
For example:
Source File u2013 InvoiceNotification.txtu2026.Then target file should create as
Target File - InvoiceNotification.csv
This can be achieved by using OS Command unix script in the receiver communication channel.
Is there any better way of doing this..say something like Dynamic Configuration or Variable substitution?
Thank you.Hi Achuth,
I think you are doing content conversion at the receiver side. Go ahead with ASMA, get the file name.
DynamicConfigurationconf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKeyFileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, a);
return "";
In the receiver file adapter, keep the extension as .CSV. That's enough.
Else you can follow as said by Abhishek Salvi. Either way you can achieve the requirement.
Thanks, -
Quickie, I have a target host moving from one domain to another. I thought this was in the documentation, but it isn't.
So...I think all i need to do is:
1) emctl upload (clear all pending files)
2) stop agent
3) delete targets from grid (its only agent and host, no databases)
4) change the target server to new domain
5) edit targets.xml & emd.properties & lastupld.xml files and put in the new domain name
6) restart agent and pray
Have I missed anything?
BazzaThink that should work...although i've never done it. Let us know if it works for you.
I guess the worst-case scenario is to remove the agent i.e. uninstall and then reinstall the agent and let GC find it.
Quickie, I have a target host moving from one domain
to another. I thought this was in the documentation,
but it isn't.
So...I think all i need to do is:
1) emctl upload (clear all pending files)
2) stop agent
3) delete targets from grid (its only agent and host,
no databases)
4) change the target server to new domain
5) edit targets.xml & emd.properties & lastupld.xml
files and put in the new domain name
6) restart agent and pray
Have I missed anything?
Bazza -
How to get the Attributes of the UNIX file Directories ?
Hi Guru,
How to find of the Attributes of the UNIX file Directories in sap TC :- u2018 *ZZWT*u2019 .
The file attribute details need to show in the report.
I try on FM : EPS_GET_FILE_ATTRIBUTES
/SDF/GET_FILE_INFO
But not getting the attributes details.
If any idea plz. Help me.
Regards,
SubashWhich basis release do you use?
From 7.0 you have [GET DATASET|http://help.sap.com/abapdocu_70/en/ABAPGET_DATASET.htm] statement
Before, you may only get what you see in AL11 : mimic what is in program RSWATCH0
Or you may register and use [UNIX commands (SM69 transaction / SXPG|http://help.sap.com/saphelp_nw70/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm]) and get the results
Edited by: Sandra Rossi on Aug 2, 2009 12:39 AM -
I have a folder that was created in Windows XP and it was given the "hidden" option. I would like to remove the hidden attribute of this folder but am unable to find a way to do it in Finder. Can anyone offer instructions on how to change the hidden attribute?
is this file on a windows formatted drive? if so you can only do it from windows.
-
Fonts changed to Unix files when saved to a remote server
Hi all, I read an archived thread regarding this, but not sure if my situation is related somehow. The issues others have had was that their font files were converted to Unix files at 0KB, when stuffed.
My issue is I backed up fonts (PS and TT) from my Mac to a remote server (PC based). When that server is accessed by Mac users, some saw the file as a Unix file at 0KB. However, there were some (including myself) that saw the actual font file.
That was a few months ago, we've retired that server since, but before doing so I transferred all the fonts to a new server. It's now a raid drive run off a Mac Xserve. After the transfer, I checked to see if the fonts were still okay, and they were showing full Mac file (no Unix). I didn't go into the new server for a couple of months, but when I did I noticed that all the fonts had been changed to Unix files. Some were at 8KB, others at 60KB. But no 0KB files. +Note: because the initial transfers was a success, the original files from the old server were deleted along with it. So there is no way of retrieving the original files. As well, were were running 10.4.10 with the original server and files. Switched to 10.5.x when files were transferred to the new server.+
I've tried the tips here (using the Terminal method and the FileUtilsCM script) http://discussions.apple.com/message.jspa?messageID=6041364 but to no avail. I'd hate to think these fonts are scrap. As they were all purchased (and there's a whole load of them). Any input in saving these files would be of great help.
Thanks in advance.The real font information is stored in a resource fork, not the data fork fo the file. Depending type type of file system you copied them to, how you copied them, and what method you are using to look at them, you may not be seeing the resource fork.
You can see more detail about files usng a Terminal command such as
ls -leaO@ file
If there is a resource fork, it will be displayed.
If the file system was not a Mac OS X external file system, then you might want to look for a file with a similar name only starting with a leading period to make it invisible to the Finder
ls -leaO@ /the/directory/with/your/fonts -
how and where do I give my user full rights ie to save files in any location, change file attributed(from read only ) etc
The simplest way is with the chmod Terminal command.
Warning: unless you know exactly what you are doing, you are almost certain to break something with indiscriminate use of this command. Make sure at least your data files are backed up (& ideally in offline storage) before you experiment with this command, & note that you can mess things up enough that you will have to reinstall the OS to recover. -
Change mode of unix file using ftp
I want change the unix file permission at the time of ftp.
Hi
You should setup a secure anonymous ftp server..
Modern ftp daemons support all kinds of useful commands, such as chmod, that allow outsiders to undo your careful permission settings. They also have configuration options (WuFTP) to acheive this.
You should ask your FTP (wu-ftp)server admin to enable extention set.
Your windows client does not support a chmod command.
In such case, chmod via the quote command with your client should
support. Something like
<b><i>ftp> quote site chmod yyy fileName</i></b>
where "yyy" is the octal number for the permission
Hope this helps
Regards
Senthil -
Font Files Changed to Unix Files
Hello all. I had backed up my fonts to an external drive. Recently my iMac's HD crashed and when I tried to reinstall my fonts, I noticed they are all Unix files with zero bytes! I can't get them to open, I tried adding the extensions they were before but nothing works. Any ideas? And how coudl this happen?
Thanks;
HenryThe real font information is stored in a resource fork, not the data fork fo the file. Depending type type of file system you copied them to, how you copied them, and what method you are using to look at them, you may not be seeing the resource fork.
You can see more detail about files usng a Terminal command such as
ls -leaO@ file
If there is a resource fork, it will be displayed.
If the file system was not a Mac OS X external file system, then you might want to look for a file with a similar name only starting with a leading period to make it invisible to the Finder
ls -leaO@ /the/directory/with/your/fonts -
How to use FTP_COMMAND to put a file in the target system
Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = dhdl
command = cmd
COMPRESS = 'N'
VERIFY =
RFC_DESTINATION =
IMPORTING
FILESIZE =
FILEDATE =
FILETIME =
tables
data = result
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkatcheck this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
MESSAGE-ID zz
LINE-SIZE 255
LINE-COUNT 65.
PROGRAM DECLARATION
PROGRAM ID : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION : Phoneix Account Reconcilation Program-Feed
Balance sheet account balances from GL
3 files needed to be enhanced. The files are " Master
Attribute File" & "Transaction File(GL Balance)". For
Master Attribute File, data needs to be retrieved from
T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
data from all the tables is downloaded into file
according to the condition specified. For Transaction
File, data needs to be retrieved from ZGEIST based on
Ledger(GG), Record Type(0), Fiscal Year, Period(016).
Then the current period is used to determine which TSLxx
& KSLxx needs to be used. Also, the conditions are
specified in specs which have been used accordingly.
The final data fetched will need to processed as files
which neednot be downloaded to Presentation/Application
server. Instead the files are been FTPed to the
Informatica Server using FTP. The location where the
files need to be located is ERC\GLOBALSAP.
TABLES
TABLES : ADR6.
TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
coa_code(20), "COA Code
coa_description(50), "COA Description
field11 TYPE x, "Line Feed
END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
act_code(20), "GL Account Number
act_desc(60), "GL Account Description
act_act_flag(1), "Account marked for deletion indicator
glact_type(1), "GL Account type
fi_line(20), "Corporate Financial Statement Line
coa_code(20), "COA Code
act_defcode(3), "Account Defination Code
field11 TYPE x, "Line Feed
END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
entity_code(12), "Entity Code
com_desc(40), "Company Name
coa_code(20), "COA Code
field11 TYPE x, "Line Feed
END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
attrib_code(5), "Attribute Code
attrib_value(20), "Attribute Value
attrib_desc(60), "Attribute Description
field11 TYPE x, "Line Feed
END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
gl_reccode(2), "GL Reconciliation Code
gl_entity(12), "GL Entity - Company Code
gl_accnum(20), "Gl Group Account Number
site(4), "Site
currency_type(6), "Transaction Currency Code
year(4) TYPE n, "Year
month(2) TYPE n, "Month
as_of_date(8), "Date Account Balance
tran_cur_amt(21), "Transaction Currency Amount
usd_amount(21), "USD Amount
racct(20), "GL Account Number
zzbewar(20), "Consolidation Transaction Type
zzdatsrc(20), "Data Source
zzblart(20), "Document Type
rassc(20), "Trading Partner
field1(20), "Attribute field1
field2(20), "Attribute field2
field3(20), "Attribute field3
field4(20), "Attribute field4
field5(20), "Attribute field5
field11 TYPE x, "Line Feed
END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
clnt_name(6), "Client Name
source_name(12), "Source Name
as_of_date(8), "AS of Date
time_stamp(6), "Time Stamp
time_zone(8), "Time Zone
num_of_files(3), "Number of Files
num_of_records(9), "Number of Records
user_ids(60), "User ID(s)
field11 TYPE x, "Line Feed
END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
rldnr TYPE rldnr, "Ledger
rrcty TYPE rrcty, "Record Type
rvers TYPE rvers, "Version
ryear TYPE gjahr, "Fiscal Year
rbukrs TYPE bukrs, "Company Code
racct TYPE racct, "Account Number
robjnr TYPE gobjnr_r, "Object Number for objects
cobjnr TYPE gobjnr_c, "Object Number for transaction
sobjnr TYPE gobjnr_s, "Object Number for partner
rtcur TYPE rtcur, "Currency Key
runit TYPE meins, "Base Unit of Measure
drcrk TYPE shkzg, "Debit/Credit Indicator
rpmax TYPE rpmax, "Period
rzzstagr TYPE stagr, "Statistical key figure
zzaltkt TYPE altkt, "Account Number in Group
zzdatsrc TYPE zdatsrc, "Data Source code
zzbewar TYPE rmvct, "Transaction Type
zzblart TYPE blart, "Document Type
rassc TYPE rassc, "Trading Partner
zzvbund TYPE rassc, "Trading Partner
tslvt TYPE tslvt9, "Transactional Currency
kslvt TYPE kslvt9, "Group Currency
END OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
rldnr TYPE rldnr, "Ledger
rrcty TYPE rrcty, "Record Type
rvers TYPE rvers, "Version
ryear TYPE gjahr, "Fiscal Year
rbukrs TYPE bukrs, "Company Code
robjnr TYPE gobjnr_r, "Object Number for objects
cobjnr TYPE gobjnr_c, "Object Number for transaction
sobjnr TYPE gobjnr_s, "Object Number for partner
rtcur TYPE rtcur, "Currency Key
runit TYPE meins, "Base Unit of Measure
drcrk TYPE shkzg, "Debit/Credit indicator
rpmax TYPE rpmax, "Period
END OF ty_zgeist_error_data.
FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
CONSTANTS
DATA : c_selected TYPE c VALUE 'X', "Field for constant value 'X'
c_y TYPE c VALUE 'Y', "For Acc marked for deletion
c_n TYPE c VALUE 'N', "For Acc not marked for deletion
c_a TYPE c VALUE 'A', "For GL Account type Asset
c_l TYPE c VALUE 'L', "For GL Account type Liability
c_q TYPE c VALUE 'Q', "For GL Account type Equity
c_r TYPE c VALUE 'R', "For GL Account type Revenue
c_e TYPE c VALUE 'E', "For GL Account type Expense
c_t TYPE c VALUE 'T', "For GL Account type
c_userid(60) TYPE c ,
c_curtp TYPE curtp VALUE '10', "Currency type
c_curtp1 TYPE curtp VALUE '30', "Currency type
c_rassc(5) TYPE c VALUE 'RASSC', "Trading Partner
c_dtsrce(6) TYPE c VALUE 'DTSRC', "Data Source
c_sacct(5) TYPE c VALUE 'SACCT', "GL Account
c_docty(5) TYPE c VALUE 'DOCTY', "Document Type
c_trxtp(5) TYPE c VALUE 'TRXTP', "Transaction Type
c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
c_datsrc(11) TYPE c VALUE 'Data Source', "Data Source
c_glacc(10) TYPE c VALUE 'GL Account', "GL Account
c_doctyp(13) TYPE c VALUE 'Document Type', "Document Type
c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
DATA (Simple Fields)
DATA: w_cnt1 TYPE i, "No Of records in output file COA Code
w_cnt2 TYPE i, "No Of records in output file Account
w_cnt3 TYPE i, "No Of records in output file Entity
w_cnt4 TYPE i, "No Of records in output file attribute
w_cnt5 TYPE i, "No Of records in output file GL Balance
w_tot_recs TYPE i, "TOtal number of records downloaded
w_date LIKE sy-datum, "System date
w_timediff LIKE sy-uzeit, "Time Difference to GMT
w_timezone(10) TYPE c, "Time Difference to GMT
w_file_count(3) TYPE n, "File Count
w_period TYPE poper, "To hold Period Value
w_year LIKE t009b-bdatj, "To hold Fiscal Year Value
w_outfile TYPE char64, "FTPed file path
w_hdl TYPE i. "Handle for FTP
INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
saknr TYPE saknr,
txt50_skat TYPE txt50_skat,
xloev TYPE xloev,
END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
it_entitycode TYPE STANDARD TABLE OF ty_entitycode
WITH HEADER LINE,
it_attribcode TYPE STANDARD TABLE OF ty_attribcode
WITH HEADER LINE,
it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
it_zgeist_data TYPE STANDARD TABLE OF ty_zgeist_data
WITH HEADER LINE,
it_zgeist_data1 TYPE STANDARD TABLE OF ty_zgeist_data
WITH HEADER LINE,
it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
wa_it_zgeist_data1 TYPE ty_zgeist_data,
wa_it_zgeist_data TYPE zgeist,
it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-006,
POSITION POS_LOW.
PARAMETERS : P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-007,
POSITION POS_LOW.
PARAMETERS : P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-008,
POSITION POS_LOW.
PARAMETERS : P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-010,
POSITION POS_LOW.
SELECT-OPTIONS : S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'P_PWD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
PERFORM write_error_report.
ENDIF.
*& Form GET_COMPANY_LIST
Form to get Company List *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
TABLES
company_list = it_company_list.
ENDFORM. "GET_COMPANY_LIST
*& Form GET_GL_ACC_DETAIL
Form to get the GL Account details *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
l_tabix LIKE sy-tabix.
SELECT saknr xloev
INTO TABLE it_gl_detail
FROM ska1
WHERE ktopl = 'G001'
AND ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
l_tabix = sy-tabix.
SELECT SINGLE txt50
INTO l_txt50
FROM skat
WHERE spras = 'EN'
AND ktopl = 'G001'
AND saknr = it_gl_detail-saknr.
it_gl_detail-txt50_skat = l_txt50.
MODIFY it_gl_detail INDEX l_tabix.
CLEAR l_txt50.
ENDLOOP.
ENDFORM. "GET_GL_ACC_DETAIL
*& Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code = text-023. "GLOBAL.
it_coacode-coa_description = text-022. "Global SAP for ERC
it_coacode-field11 = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM. "PROCESS_COACODE
*& Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
it_gl_detail2[] = it_gl_detail[].
SORT it_gl_detail2 BY saknr.
DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
LOOP AT it_gl_detail2.
MOVE it_gl_detail2-saknr TO it_acctcode-act_code.
MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
IF it_gl_detail2-xloev = c_selected.
it_acctcode-act_act_flag = c_n.
ELSE.
it_acctcode-act_act_flag = c_y.
ENDIF.
Determine GL Account type based on GL account number
l_saknr = it_gl_detail2-saknr.
SHIFT l_saknr LEFT DELETING LEADING '0'.
IF l_saknr CP '1*'.
it_acctcode-glact_type = c_a.
ELSEIF l_saknr CP '2*'.
it_acctcode-glact_type = c_l.
ELSEIF l_saknr CP '3*'.
it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005 "DR1K907900
ELSEIF l_saknr CP '4*'.
it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005 "DR1K907900
ELSEIF l_saknr CP '5*'.
it_acctcode-glact_type = c_r.
ELSEIF l_saknr CP '6*'.
it_acctcode-glact_type = c_e.
ELSEIF l_saknr CP '7*'.
it_acctcode-glact_type = c_t.
ENDIF.
it_acctcode-fi_line = 'CDR'.
it_acctcode-coa_code = 'GLOBAL'.
it_acctcode-act_defcode = '001'.
it_acctcode-field11 = '11'.
APPEND :it_acctcode.
CLEAR :it_acctcode,it_gl_detail2.
ENDLOOP.
ENDIF.
ENDFORM. "PROCESS_ACCTCODE
*& Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
LOOP AT it_company_list.
SHIFT it_company_list-company LEFT DELETING LEADING '0'.
MOVE it_company_list-company TO it_entitycode-entity_code.
MOVE it_company_list-name1 TO it_entitycode-com_desc.
it_entitycode-coa_code = 'GLOBAL'.
it_entitycode-field11 = '11'.
APPEND it_entitycode.
CLEAR : it_company_list,it_entitycode.
ENDLOOP.
ENDIF.
ENDFORM. "PROCESS_ENTITYCODE
*& Form PROCESS_ATTRIBCODE
Form to Populate Attribute data to output file internal table *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
MOVE c_rassc TO it_attribcode-attrib_code.
MOVE it_t001-bukrs TO it_attribcode-attrib_value.
MOVE c_tradptn TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
MOVE c_dtsrce TO it_attribcode-attrib_code.
MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
MOVE c_datsrc TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
MOVE c_sacct TO it_attribcode-attrib_code.
MOVE it_ska1-saknr TO it_attribcode-attrib_value.
MOVE c_glacc TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
MOVE c_docty TO it_attribcode-attrib_code.
MOVE it_t003-blart TO it_attribcode-attrib_value.
MOVE c_doctyp TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
MOVE c_trxtp TO it_attribcode-attrib_code.
MOVE it_t856-trtyp TO it_attribcode-attrib_value.
MOVE c_trantyp TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
ENDFORM. "PROCESS_ATTRIBCODE
*& Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table *
FORM process_glbal.
DATA : l_ctran_amt(21),
l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
it_glbal-gl_reccode = '04'.
it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
it_glbal-site = 'ERC'.
it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
it_glbal-year = w_year.
it_glbal-month = w_period.
it_glbal-as_of_date = w_date.
l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
IF l_ctran_amt LT 0.
TRANSLATE l_ctran_amt USING ' 0'.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
value = l_ctran_amt.
ELSE.
Trailing Zero's to the value
SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
TRANSLATE l_ctran_amt USING ' 0'.
REPLACE '0' WITH '' INTO l_ctran_amt.
ENDIF.
it_glbal-tran_cur_amt = l_ctran_amt.
l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
IF l_cusd_amt LT 0.
TRANSLATE l_cusd_amt USING ' 0'.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
value = l_cusd_amt.
ELSE.
Trailing Zero's to the value
SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
TRANSLATE l_cusd_amt USING ' 0'.
REPLACE '0' WITH '' INTO l_cusd_amt.
ENDIF.
it_glbal-usd_amount = l_cusd_amt.
it_glbal-racct = wa_it_zgeist_data1-racct.
it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
it_glbal-rassc = wa_it_zgeist_data1-rassc.
it_glbal-field11 = '11'.
APPEND it_glbal.
CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM. "PROCESS_GLBAL
*& Form PROCESS_GLOBALSAP
Form to Populate COntrol data to Output file internal table *
FORM process_globalsap.
DATA :l_total(9),
l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
w_timediff = sy-tzone * -1.
CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
w_timediff = sy-tzone.
CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date = w_date.
it_globalsap-time_stamp = sy-uzeit.
it_globalsap-time_zone = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM. "PROCESS_GLOBALSAP
*& Form COUNT_RECORDS
Form to count total number of records Downlaoded *
FORM count_records.
DESCRIBE TABLE it_coacode LINES w_cnt1.
DESCRIBE TABLE it_acctcode LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM. "COUNT_RECORDS
*& Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
FROM zgeist
WHERE rldnr EQ 'GG'
AND ryear EQ w_year
AND rrcty EQ 0
AND rpmax EQ '016'
AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
AND rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
IF wa_it_zgeist_data-zzaltkt EQ space.
wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
ELSE.
it_zgeist_data1-rbukrs = wa_it_zgeist_data-rbukrs.
it_zgeist_data1-rldnr = wa_it_zgeist_data-rldnr.
it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
it_zgeist_data1-racct = wa_it_zgeist_data-racct.
it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
it_zgeist_data1-rtcur = wa_it_zgeist_data-rtcur.
PERFORM get_tslvt_kslvt_values USING w_period.
COLLECT it_zgeist_data1.
ENDIF.
CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM. " get_zgeist_data
*& Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
WHEN '001' OR '01'.
l_text = text-e01.
WHEN '002' OR '02'.
l_text = text-e02.
WHEN '003' OR '03'.
l_text = text-e03.
WHEN '004' OR '04'.
l_text = text-e04.
WHEN '005' OR '05'.
l_text = text-e05.
WHEN '006' OR '06'.
l_text = text-e06.
WHEN '007' OR '07'.
l_text = text-e07.
WHEN '008' OR '08'.
l_text = text-e08.
WHEN '009' OR '09'.
l_text = text-e09.
WHEN '010' OR '10'.
l_text = text-e10.
WHEN '011' OR '11'.
l_text = text-e11.
WHEN '012' OR '12'.
l_text = text-e12.
WHEN '013' OR '13'.
l_text = text-e13.
WHEN '014' OR '14'.
l_text = text-e14.
WHEN '015' OR '15'.
l_text = text-e15.
WHEN '016' OR '16'.
l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1 sy-vline,
2 text-h02,
9 sy-vline,
10 text-h03,
19 sy-vline,
20 text-h04,
28 sy-vline,
29 text-h05,
41 sy-vline,
42 text-h06,
49 sy-vline,
50 text-h07,
69 sy-vline,
70 text-h08,
89 sy-vline,
90 text-h09,
109 sy-vline,
110 text-h10,
119 sy-vline,
120 text-h11,
130 sy-vline,
131 text-h12,
144 sy-vline,
145 text-h13,
152 sy-vline,
153 text-h14,
234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
FORMAT COLOR 2.
WRITE:/1 sy-vline,
4 wa_it_zgeist_error_data-rldnr,
9 sy-vline,
13 wa_it_zgeist_error_data-rrcty,
19 sy-vline,
22 wa_it_zgeist_error_data-rvers,
28 sy-vline,
32 wa_it_zgeist_error_data-ryear,
41 sy-vline,
42 wa_it_zgeist_error_data-rbukrs,
49 sy-vline,
50 wa_it_zgeist_error_data-robjnr,
69 sy-vline,
70 wa_it_zgeist_error_data-cobjnr,
89 sy-vline,
90 wa_it_zgeist_error_data-sobjnr,
109 sy-vline,
112 wa_it_zgeist_error_data-rtcur,
119 sy-vline,
123 wa_it_zgeist_error_data-runit,
130 sy-vline,
135 wa_it_zgeist_error_data-drcrk,
144 sy-vline,
147 wa_it_zgeist_error_data-rpmax,
152 sy-vline,
153 l_text,
234 sy-vline.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM. " write_error_report
*& Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
<f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
l_tslvt TYPE tslvt9,
l_kslvt TYPE kslvt9,
l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
CONCATENATE l_kslvt_val l_period+1(2) INTO l_kslvt_val.
ASSIGN (l_tslvt_val) TO <f1>.
l_tslvt = <f1>.
it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
ASSIGN (l_kslvt_val) TO <f2>.
l_kslvt = <f2>.
it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
l_period = l_period - 1.
clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
l_tslvt_val = 'wa_it_zgeist_data-tsl'.
l_kslvt_val = 'wa_it_zgeist_data-ksl'.
if l_period = 0.
exit.
endif.
ENDDO.
ENDFORM. "get_tslvt_kslvt_values
*& Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1 text
<-- p2 text
FORM process_ftp_file .
DATA: l_slen TYPE i,
l_error,
l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
c_key TYPE i VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = l_pwd
sourcelen = l_slen
key = c_key
IMPORTING
destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = l_pwd
host = p_host
rfc_destination = c_dest
IMPORTING
handle = w_hdl
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = c_dest
EXCEPTIONS
OTHERS = 1.
ENDFORM. " process_ftp_file
*& Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = w_hdl
fname = l_string
character_mode = 'X'
TABLES
text = it_tab[]
EXCEPTIONS
tcpip_error = 1
command_error = 2
data_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING invalid_output_file.
ENDIF.
ENDFORM. " download_to_ftp
*& Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
l_day(2) TYPE c,
l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day = sy-datum+6(2).
CASE l_month.
WHEN '01'.
IF l_day <= '15'.
w_period = '12'.
w_year = l_year - 1.
ELSE.
w_period = '1'.
w_year = l_year.
ENDIF.
WHEN '02'.
IF l_day <= '15'.
w_period = '1'.
w_year = l_year.
ELSE.
w_period = '2'.
w_year = l_year.
ENDIF.
WHEN '03'.
IF l_day <= '15'.
w_period = '2'.
w_year = l_year.
ELSE.
w_period = '3'.
w_year = l_year.
ENDIF.
WHEN '04'.
IF l_day <= '15'.
w_period = '3'.
w_year = l_year.
ELSE.
w_period = '4'.
w_year = l_year.
ENDIF.
WHEN '05'.
IF l_day <= '15'.
w_period = '4'.
w_year = l_year.
ELSE.
w_period = '5'.
w_year = l_year.
ENDIF.
WHEN '06'.
IF l_day <= '15'.
w_period = '5'.
w_year = l_year.
ELSE.
w_period = '6'.
w_year = l_year.
ENDIF.
WHEN '07'.
IF l_day <= '15'.
w_period = '6'.
w_year = l_year.
ELSE.
w_period = '7'.
w_year = l_year.
ENDIF.
WHEN '08'.
IF l_day <= '15'.
w_period = '7'.
w_year = l_year.
ELSE.
w_period = '8'.
w_year = l_year.
ENDIF.
WHEN '09'.
IF l_day <= '15'.
w_period = '8'.
w_year = l_year.
ELSE.
w_period = '9'.
w_year = l_year.
ENDIF.
WHEN '10'.
IF l_day <= '15'.
w_period = '9'.
w_year = l_year.
ELSE.
w_period = '10'.
w_year = l_year.
ENDIF.
WHEN '11'.
IF l_day <= '15'.
w_period = '10'.
w_year = l_year.
ELSE.
w_period = '11'.
w_year = l_year.
ENDIF.
WHEN '12'.
IF l_day <= '15'.
w_period = '11'.
w_year = l_year.
ELSE.
w_period = '12'.
w_year = l_year.
ENDIF.
ENDCASE.
ENDFORM. " get_period_year -
Hi
i am designing a adobe form which will be send in mail when a button is clicked, i found that the attachment name to be "unknown.pdf". how can i change this ???
i found out a method called getAcrobatApplicationName() in XML and when i changed application name in that its not getting reflected. So is there any other way to change the file name on "Button Click" event?
Thanks
GopalHi Gopal,
See if it helps:
In NW2004s we use the following. getPdf() returns a byte[], the filename is "document-<username>.pdf" and source is the attribute of an IFrame UI element.
code
private void initPdf() {
IWDResource resource =
WDResourceFactory.createResource(
getPdf(),
"document-"
+ WDClientUser.getLoggedInClientUser().getSAPUser().getUniqueName(),
WDWebResourceType.PDF);
String source =
resource.getUrl(WDFileDownloadBehaviour.OPEN_INPLACE.ordinal());
wdContext.currentContextElement().setSource(source);
[/code]
On NW2004 we use a FileDownload UI element (with target=_self) and we call initFileBinaryType method in the wdDoInit method. Of course you still need to set the binary PdfData context attribute with the actual content of the PDF file.
code
private void initFileBinaryType() {
IWDModifiableBinaryType pdf =
initFileBinaryType(IPrivateTestAppView.IContextElement.PDF_DATA);
pdf.setFileName("document-"
+ WDClientUser.getLoggedInClientUser().getSAPUser().getUniqueName());
pdf.setMimeType(WDWebResourceType.PDF);
private IWDModifiableBinaryType initFileBinaryType(String attribute) {
return (IWDModifiableBinaryType) wdContext
.getNodeInfo()
.getAttribute(attribute)
.getModifiableSimpleType();
[/code]
Regards,
Arafat -
Ora-12545 connect failed because target host does not exist(plsql develper)
Hi,
I am using Oracle 10g version, and i am using plsql developer.
I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like:
ora-12545 connect failed because target host does not exist
I have not done any changes in setting though i am getting this problem, earlier i was able to work with plsql developer very good.
I am sending the TNS file for your reference.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vnod-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please help me in this.
Thanks,
Vinod910575 wrote:
Hi,
I am using Oracle 10g version, and i am using plsql developer.There are numerous products with similar names.
Which vendor provides your software & which version of the software do you have?
Is the Oracle database server system installed on the same system as your client software?
post results from following SQL
SELECT * FROM V$VERSION;
Handle: 910575
Email: [email protected]
Status Level: Newbie
Registered: Jan 26, 2012
Total Posts: 42
Total Questions: 20 (18 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on May 18, 2012 9:30 PM -
Changing LDAP "Search Attribute"
Hello:
I am authenticating against LDAP as such:
Hashtable authEnv = new Hashtable();
String dn =
"CN=" + userAuth.getFirstName() + " " + userAuth.getLastName() +
",OU=zzzzzzzz,DC=yyyyy,DC=xxx";
authEnv.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
authEnv.put(Context.PROVIDER_URL, "ldap://999.999.199.999:389");
authEnv.put(Context.SECURITY_AUTHENTICATION, "simple");
authEnv.put(Context.SECURITY_PRINCIPAL, dn);
authEnv.put(Context.SECURITY_CREDENTIALS, password);
I am using the user's first and last name to authenticate. Now, I want to use their login id to authenticate. I was told "to change the Search Attribute from 'uid' to 'sAMAccountName'". I don't know what this refers to. Does anybody have any ideas?
Thanks
EricA call to Apple support helped solve this problem, especially to deal with a typo in the Apple Snow Leopard Server documentation:
1. Export all of your users, groups, etc. to files. Passwords will be reset but everything else will work.
2. In OD, change the server to be "stand alone" (basically turning off OD).
3. From the command line run the following command, noting that you literally put the string "HostName" in the position specified, not the old host name specified in the documentation:
sudo scutil --set HostName <fully qualified domain name>
4. Reboot
5. Restart Server Admin and recreate the OD master using the fully qualified name.
6. Go to KeyChain and look for the entries for system -> com.apple.opendirectory. One should point to your server and one should be blank. Delete the bank entry.
Done!
Maybe you are looking for
-
how can you prevent the windows to minimize all over the screen as soon as your mouse quits one... this is a real pain... it seems also that the cursor has a tendency to slide or jump randomly, thought it was my mouse but that doing it with a differe
-
I have a form with a text field. It is set to accommodate multiple lines of data without a limit on length. When I enter data, I get a scroll bar after two lines because I kept the cell small. It would be nice if the cell would grow with the data ent
-
Massive troubles with our existing Mac, iTunes and synching our daughters new touch. Heres what we want to do. Use one iTunes account (my wifes iPhone is primary device) but be able to connect my daughters new iTouch, synch music, her Gmail, Gmail co
-
NEED HELP WITH WORKFLOW CONFIGURATION
I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tel
-
PS in CS5.5 suddenly stopped opening image files
I deactivated and uninstalled CS5.5 on an old box and installed and activated it on a new machine several days ago. PS was working as of yesterday, but today it won't open an image file. I select and click to open a file but absolutely nothing happen