Changing UOM that is Displayed in CCM

I have a custom zTable in SRM that contains company specific UOM values. When CCM displays the results of a search list, I need to display the company specific UOM instead of the ISO UOM. How can I find the CCM data structure that contains the result list so that I can modify it before it is displayed?

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

How do you change the fields that are displayed on the email preview list after a search?

How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email? All of a sudden the displayed fields changed on me whenever I do a search in mail. When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field. However, when I do a search this changes to the "To" field. Can anyone help? Thanks, ccarey

ipicus
But why would you want this?
iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
Regards
TD

How do I change the name that is displayed as one of the main folders on finder?

I cannot figure out how to change the name that is displayed as one of the folders (in the red circles in the picture). It currently has my dad's name because he set up the computer but he does not use it and I wanted to try and change the name to my own. I have tried system-preferences/users-&-groups and made changed the admin to my own name but that did not change the folder name. And when I clicked the "unlock to make changes" on the folder menu (left window in the picture) it did not allow me to change the name. Any ideas?

That is your admin account on the computer. Simple solution:
Create a new admin user account to your liking. Log into that new account then delete the old account.
See also this article.

Changing the InfoView website address that is displayed

I'd like to change the website name that is displayed when people log onto Infoview.
I have a 4 server clustered environment, and each server is running Apache and TomCat. The sequence of events is:
user types in Infoview address in form http://myinfoview
Apache translates this to http://myinfoview.domain.com:8080
The network load balancer then redirects it to anyone of the 4 servers that is up, on a round-robin basis.
Tomcat responds to the request and redirects the users to http://serverX.domain.com:8080/InfoViewApp
(where serverX is serverA thru D)
This presents the user with the name of the server in the webaddress at the top - I'd like to always present the user with the same web address, http://myinfoview.domain.com etc no matter what server they are on, rather than presenting the individual server names.
I've tried changing the ROOT\index.html file to point to http://myinfoview:8080/InfoViewApp rather than http://serverX:8080/InfoViewApp, and this works, until you try and do anything - I just keep getting TimeOut messages.
I've tried using a relative path instead of using the FQDN (so doing a rediorect to /InfoViewApp), but this also gave me a timeout message.
I've added the required domain to the HOSTS file on the server. I've tried adding a virtual host to the Tomcat 5.5 CONF/Server.xml file, and this also kept giving me "A timeout has occurred" message.
What I'm wanting shouldn't be too hard to do, but I can't quite get it working. Has anyone who has done this and got it working, give me some pointers on what I'm missing?
Summary of my setup:
BO XI 3.1, SP3, Fixpack 3.5 x 4. All machines are Virtual Servers running identical hardware, with identical installations of BO, with the full suite installed on each server.
Windows 2008 R2 (x64), running Apache on port 80 and TomCat on 8080, using mod_jk with a hardware network load balancer.
FRS is on a network SAN.
Clustering is setup and appears to be working correctly, as loads seem to be balanced across all 4 servers. Windows AD SSO is setup and working correctly.
Adrian

Unfortunately, that isn't working for me, which is why I'm looking for suggestions.
Here's my full details.
NAME      IP                           DNS Name
ServerA 10.18.16.61           ServerA
ServerB 10.18.16.62           ServerB
ServerC 10.18.16.63           ServerC
ServerD 10.18.16.64           ServerD
NLB         10/18.16.248         MyInfoView
The NLB has a DNS entry called "MyInfoview" so if you ping it etc, you see 10.18.16.248, and if you navigate to it in a browser, it takes you to one of ServerA-D.
So far so, everything is good.
ServerA-D each have the full BO suite on, using a network SAN for FRS storage. The CMS is clustered correctly - going directly to ServerA could actually end me up on a different server (the Tomcat/Apache is also clustered).
BUT, the link at the top says "http://serverA:8080/InfoViewApp" etc. I want it to say "http://MyInfoview:8080/InfoViewApp".
It's likely because of the way that I have had to get TomCat working - as I mentioend in my post, the Apache (port 80) index.html repoints to "http://myinfoview:8080"
Tomcat (port 8080) then has in the ROOT\index.html file
"http://serverA:8080/InfoViewApp" - and this is where my problem is.
I have tried the following:
in the Apache index.html : redirect to http://myinfoview:8080/InfoViewApp
In the server's Tomcat ROOT\index.html: redirect to http://myinfoview:8080/InfoVeiwApp
OR
relative path "/InfoViewApp"
Then I get logged on OK, but as soon as I click on "Document List" - or anything that accesses the CMS - then I get
"An error has occurred: A timeout error has occurred"
The ONLY way I have got this to work is by having the server name hardcoded into the Tomcat ROOR\index.html file.
I already have a DNS name that I want to use, and that is linked to the NLB.
I was hoping that maybe all I needed to do was setup a virtual host in the Tomcat server.xml file, but I was unsuccessful in setting that up in the Infoview environment.

How do I change the default apple ID that's displayed when buying or updating apps? Mine is defaulting to a no-longer-existing ID, and I don't know how to change it.

How do I change the default apple ID that's displayed when buying or updating apps? It's currently defaulting to a no-longer-existing ID, and I don't know how to change it.

Any apps you purchased with the no-longer-existing ID will always have to be updated with the password to that account, you cannot merge account purchases.
To change to your new account go to Settings > Store > Apple ID: and put in the one you want to use.

Can we change the keyboard language that is displayed on iphone programatically i.e can we give user option to change keyboard to different language from application at runtime?

Can we change the keyboard language that is displayed on iphone programatically i.e can we give user option to change keyboard to different language from application at runtime?

Hi All,
Please Update the Thread
Regards
Khanna

Change UOM in PR but PO exist for PR

Hi Experts,
We created a PR with a customized account assignment cat. and material text (no material code) with UOM L , we created PO in UOM L but purchasers cant do GRN because they received material in UOM LG ( which they mentioned in PO/PR Texts area). Now, the issue is with changing the UOM from L to LG in PR/PO. I could though of only option to delete PO and PR line item and create a new but that we can't do because the same PO number is been shared between concerned parties/departments/contractors.
Please tell me what are the other ways to change UOM. (as I am not using material code so additional data field doesnt come in picture)
Thanks.
Saurabh

Thanks Jurgen.
Even if I delete PO line item and create a new one then UOM should come from PR itself but after PO deletion also PR UOM is in display mode. Is there any program required to run to make it editable?
I found one info. in PO about 'Order price unit' which says:
Order Price Unit (Purchasing)
Indicates the unit of measurement to which the purchase order price relates.
Example
A material or commodity (for example, oil) can be ordered by the liter, but the vendor's invoice shows a price of 2 dollars per kilogram.
You enter 10 l as the order quantity and order unit, but specify 2 dollars per kg as purchase order price and purchase order price unit.
In addition, you enter the conversion factor "order unit -> purchase order price unit" (for example 2 l per 1 kg) in the "details" data of the purchase order item.
In GRN it says:
Definition: purchase order price unit
Purchasing (MM-PUR)
An alternative unit of measure that can be used for ordering purposes.
The purchase order price unit enables you to express the purchase order price in a unit that differs from the order unit.
Example
Ordered: 100 m2; Price: $24.20 for 10 kg.
The order unit is m2. The purchase order price unit is kg.
Return ->
Definition: purchase order price unit
I was just wondering if I could use this method to change/show a change in UOM. But if no relation exists then... it wont work I think.
Kindly suggest.
Thanks

Change UOM in Material master

Hi friends,
I have a material X in Plant ABC and Plant XYZ.
I have no open PR's and PO's for those materials.
I have received 10 Ea in Plant ABC on 10/20/09 ( Current stock is 10 ea in ABC)
                   and 20 Ea in Plant XYZ on 11/12/2009.( Current stock is 20 ea in XYZ)
Now I wanted to change the UOM from EA to LB.
I did issue (GM 201) 10 Ea from ABC and 20 Ea from XYZ. So, in MMBE no stock was showing.
Still, when i try to change UOM, it was erroring that "Stock exist in Plant ABC and Plant XYZ" ????
Any Idea, why so.
Appreciate your valuable feed back.
Note: I could change the UOM once I canceled the previous material documents to make sure Zero stock.
But, Why I could not be able to change when I issue (GM 201) and made zero stock????
Regards,
Dev.

Hi,
According to your explanation the condition has gone through as below scenarios:
You have received 10 Ea in Plant ABC on 10/20/09 ( Current stock is 10 ea in ABC)
and 20 Ea in Plant XYZ on 11/12/2009.( Current stock is 20 ea in XYZ)
You've issued 10ea in plant ABC on 11/23/09 (GM 201)
and you've I issued 20 ea in plant XYZ on 11/23/09 (GM201)
From the above, I conclude your current period is 11/2009 (November) and for solving the case on:
Plant ABC. --> cancel your GI (mvt 202) for 10ea with the same current date 11/23/09 then follow by
                        GI with the previous posting period 10/30/09
Plant XYZ --> display material stock with MM03 under storage location stock tab for previous period stock info.
                       then you should GI for relevant qty that you've seen onto previous period posting date.
Hope it may helps you...
Cheers,
Girang
Edited by: girang irawan on Nov 25, 2009 9:48 AM

Change width of fields displayed on PDF from ALV

Hello,
I have a requirement in which i have to print an alv report in a pdf , now in the report say there are 11 fields of which 5 are hidden , so when i print the report in pdf , in the pdf output the entire width of the page is not occupied but only the width of the displayed fields
for eg. The 6 fields being displayed will cover only a part of the page..however i want the fields to occupy the entire page depending on the fields that are displayed .. plz advice how i can achieve this..

Hi,
<li>After converting to PDF, try to use SX_TABLE_LINE_WIDTH_CHANGE function module to change the width of the PDF.
     CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
         src_spoolid              = g_spool_no
         no_dialog                = ' '
       IMPORTING
         pdf_bytecount            = l_no_of_bytes
         pdf_spoolid              = l_pdf_spoolid
         btc_jobname              = l_jobname
         btc_jobcount             = l_jobcount
       TABLES
         pdf                      = i_pdf
       EXCEPTIONS
         err_no_abap_spooljob     = 1
         err_no_spooljob          = 2
         err_no_permission        = 3
         err_conv_not_possible    = 4
         err_bad_destdevice       = 5
         user_cancelled           = 6
         err_spoolerror           = 7
         err_temseerror           = 8
         err_btcjob_open_failed   = 9
         err_btcjob_submit_failed = 10
         err_btcjob_close_failed = 11
         OTHERS                   = 12.
     CASE sy-subrc.
       WHEN 0.
       WHEN 1.
         MESSAGE s000(0k) WITH 'No ABAP Spool Job'.
         EXIT.
       WHEN 2.
         MESSAGE s000(0k) WITH 'Spool Number does not exist'.
         EXIT.
       WHEN 3.
         MESSAGE s000(0k) WITH 'No permission for spool'.
         EXIT.
       WHEN OTHERS.
         MESSAGE s000(0k)
            WITH 'Error in Function CONVERT_ABAPSPOOLJOB_2_PDF'.
         EXIT.
     ENDCASE.
     CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
         line_width_src              = 134
         line_width_dst              = 255
       TABLES
         content_in                  = i_pdf
         content_out                 = l_attachment
       EXCEPTIONS
         err_line_width_src_too_long = 1
         err_line_width_dst_too_long = 2
         err_conv_failed             = 3
         OTHERS                      = 4.
     IF sy-subrc NE 0.
       MESSAGE s000(0k) WITH 'Conversion Failed'.
       EXIT.
     ENDIF.
Thanks
Venkat.O

Create HTML file that can display unicode (japanese) characters

Hi,
Product:           Java Web Application
Operating system:     Windows NT/2000 server, Linux, FreeBSD
Web Server:          IIS, Apache etc
Application server:     Tomcat 3.2.4, JRun, WebLogic etc
Database server:     MySQL 3.23.49, MS-SQL, Oracle etc
Java Architecture:     JSP (presentation) + Java Bean (Business logic)
Language:          English, Japanese, chinese, italian, arabic etc
Through our java application we need to create HTML files that have to display unicode text. Our present works well with English and most of the european character set. But when we tried to create HTML files that will display unidoce text, say japanese, only ???? is getting displayed. Following is the code we have used. The out on the browser displays the japanese characters correctly. But the created file displays only ??? in place of japanese chars. Can anybody tell how can we do it?
<%
String s = request.getParameter( "txt1" );
out.println("Orignial Text " + s);
//for html output
String f_str_content="";
f_str_content = f_str_content +"<HTML><HEAD>";
f_str_content = f_str_content +"<META content=\"text/html; charset=utf-8\" http-equiv=Content-Type></HEAD>";
f_str_content = f_str_content +"<BODY> ";
f_str_content = f_str_content +s;
f_str_content = f_str_content +"</BODY></HTML>";
f_str_content = new String(f_str_content.getBytes("8859_9"),"Shift_JIS");
out.println("file = " + f_str_content);
          byte f_arr_c_buffer1[] = new byte[f_str_content.length()];
f_str_content.getBytes(0,f_str_content.length(),f_arr_c_buffer1,0);
          f_arr_c_buffer1 = f_str_content.getBytes();
FileOutputStream l_obj_fout; //file object
//file object for html file
File l_obj_f5 = new File("jap127.html");
if(l_obj_f5.exists()) //for dir check
l_obj_f5.delete();
l_obj_f5.createNewFile();
l_obj_fout = new FileOutputStream(l_obj_f5); //file output stream for writing
for(int i = 0;i<f_arr_c_buffer1.length;i++ ) //for writing
l_obj_fout.write(f_arr_c_buffer1);
l_obj_fout.close();
%>
thanx.

Try changing the charset attribute within the META tag from 'utf-8' to 'SHIFT_JIS' or 'utf-16'. One of those two ought to do the trick for you.
Hope that helps,
Martin Hughes

Can I surf other internet options through Apple TV or is it limited to the icons that are displayed?

My Apple TV always seems to work fine in the a.m. but has no signal in the p.m. Does it have to be reset when this happens?

is it limited to the icons that are displayed?
yes.
My Apple TV always seems to work fine in the a.m. but has no signal in the p.m.
perhaps one of your neighbor's wireless networks is interfering with yours.
download iStumbler and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.

How to change slider control digital display precision from program

I want to change slider control digital display precision from my Labview 2013 program. I can not find property that changes slider digital display format.
Solved!
Go to Solution.

rt clk the digital display>create>property node>format string
you could also do the slide scale, if needed...
from the front panel:rt clk properties>goto display format tab>goto drop down list and pick "digital display 0" and format

Change on line number display with out using moble...

I need to change the phone number that is displayed but when I tried, my account wants to send a text. I do not want to use a moble number. How can I do this?

wande wrote:
I need to change the phone number that is displayed but when I tried, my account wants to send a text. I do not want to use a moble number. How can I do this?
What number are you trying to set as the Caller ID when you call telephones from Skype?
Landline numbers that are not Skype Online Numbers can't be used as Caller ID, as Skype does not have a mechanism to confirm you own or control that number. Only certain Skype Online Numbers are eligible for use as Caller ID - the numbers in Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US (list taken from the "Caller ID" link at the bottom of this page). If you don't have an Online Number, or your Online Number is from a country not in the list above, your only option is to use a mobile number - which can be in almost any country, excluding Japan and Mexico.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Changing the column names displayed via an ODBC driver

Hi we are just starting to used Crystal Reports to improve the reporting capabaility of a legacy application, we can access the data fine using an ODBC driver. What we want to do is change the column names that are displayed within Crystal Reports so they are more user friendly and not in techno speak,, so that the users can create their own reports. Do we need to used Business Objects to setup a Universe to do this, is their a simple cheaper method sorry if this post is in the wrong section

Can you set up "views" in your database?Â That would probably be the easiest way to do this.
-Dell
- A computer only does what you told it to, not what you thought you told it to!</p>

Can I change the text fields displayed in iTunes cover view

I have alot of music in my iTunes library that are from "various artist" cds. when in cover flow view i want to see "song" & "artist" fields displayed not "album" & "album artist". is there a way to change the fields that are displayed. This is especially annoining when in full screen mode, i want to see the artist of the song that is playing, not the artist for the whole album.
I have my iMac in a fairly promenent location so that anyone can see what is currently playing on the system that is almost always piping music throughout the house via several airport expresses.
any tips?
chris

I'm not sure this will work, but I think the best chance is:
Settings > General > Accessibility > Large Text

Changing UOM that is Displayed in CCM

Similar Messages

Maybe you are looking for