Changing user for Torch 9800

I did get a new phone to myself and will give my well served Torch 9800 too my wife to replace even older Nokia E71. But what is the best way to change user for phone? I am not worried about leaving any data to phone, but I want to change all e-mails addresses, phone set-ups etc.
Solved!
Go to Solution.

Whenever you give your phone to someone else, do a security wipe. That way, it'll be like they're getting a new phone right out of the box with no data left over from you.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

  • Whatsapp problem for Torch 9800

    Hello,
    I have a problem with my phone. I downloaded this app from the official website, installed and working fine for a couple of days. Then, it starts to lag and freezes for no reason, especially when I'm scrolling down looking at my contacts in favourites. I did a soft and hard reset and doesn't work at all. So i ended up deleting this app and reinstall again and the problem is still happening.
    Any comments?

    denizua98 wrote:
    which the latest version for torch 9800
    I want a new software up to 7.0 version
    is there new update?
    Hi @denizua98! Welcome to the BlackBerry Support Community Forums!
    No, you cannot install Os 7 on your Torch 9800.
    OS 6.0.0.756 was the last update.
    Cheers!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Desktop software for Torch 9800

    Hi there
    Have downloaded the desktop software for Torch 9800 for use on new PC with Windows 8.1 and each time it synchronises (only doing calendar and contacts one way from device to PC in outlook) the desktop programe  crashes half way through.  Help please.

    Hi and Welcome to the Community!
    I've seen multiple posts from folks on Windows 8.1 having various issues. My suspicion is compatibility...refer:
    http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
    As you can see, it states Windows 8, but not 8.1. Hence, my suspicion is that the current versions of the Desktop Software are not compatible with 8.1, and hence cannot be expected to provide proper functionality.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Upgrade software for torch 9800

    I have BB Torch 9800. I m living india and carrier is Airtel. Can anybody help me to how to upgrade software.

    Hello,
    The simplest way is to, on a PC (you cannot do this on MAC):
    1) Uninstall, from your PC, any BB OS packages
    2) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
    3) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    Don't forget to backup.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MEP 0 LEFT FOR TORCH 9800

    Please unlock my Torch 9800
    provider : AT&T
    Thank you
    Edit: Personal information removed (IMEI). At no time should you provide any personal information to any other community member. Check out the User Guidelines for details.

    After the ten attempts have been used, you must get RIM to unlock the device.
    There are two routes, and only two, to achieve this.
    * IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
    * If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can't send a photo by text - New user, Blackberry Torch 9800

    I recently started using the Blackberry Torch 9800 and I'm still getting the hang of things.
    This means I'm at the stage where i'm still accidentally muting myself while i leave a phone message or putting people on hold with my ear.  If anyone has a master solution for this, that's welcomed, but it's not my main question.
    I want to know how to send a photo by text.  I've tried, and it comes up with an x next to it, as it hasn't sent.
    i looked around the internet and found the suggestion that I resize my images using some app.  The app they suggested doesn't exist anymore so I downloaded "Fast Photo Editor Free" and resized my image.  It still didn't send.  I made it smaller than you'd ever want an image to be, and it still wouldn't send.
    To be clear, I can put the photo in the text, but once I push send, the text shows up with a red x next to it.
    I'm not really sure what to do. 

    Hello irishduck
    Welcome to the Community
    You may try contacting you Carrier as there might be settings that they can do on their end to let you send the MMS. You may also wanna check these pages to help you familiarize with your phone.
    Blackberry 101
    Blackberry Tips and Tricks
    Blackberry Battery Saving Tips
    Goodluck
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Change user for DB13 jobs

    Hi All,
    I want to change the user for DB13 jobs of update stats and check database. I do not find any option to do that.
    Please help me how to do this??
    Thanks
    Tajinder

    Hi tajinder,
    go to SM37, select job & select job -> change, go to edit -> steps and select step -> change from the menu.
    Enter the user name in user text box.
    Hope this help
    Regards,
    Rajesh

  • Change user for backup scheduled job

    Hi all,
    In our ecc 6.0 system is cluster controlled.i have scheduled regular br offline backup @ night for this month in db13.In a particular day for some reason i have removed the scheduler in db13 and also delete the associated released background job in sm37.On the next day after restarting the system i change the user for backup background job in sm37 for the current day but i need the changes for all rest of the day of this month.One option is that delete from db13 and recreate again with required usreid.
    without recreate could anyone tell me how to change the user for background job for the other day also?? 
    Regards
    Pinaki

    Hi
    In order to change the user id in SM37 to run under different user you can highlight the background job which is scheduled to run, double click on that and click on STEP in task bar.
    Click on USER and you would have a change pencil icon.
    Click on Pencile Icon and It would take you to another pop up were you can have the user name entered.
    In this way job would would show some other user name who is creator but would run under the person whom we have entered above.
    Thanks and Regards
    Arun R

  • Changing user for PPF - Post Processing Framework

    Hello,
    Is there a way to change the user for a Post Processing action once the trigger is activated?
    There are times where we want a user action to kick off a PPF task, but we do not want them to have security to complete this extra task themselves.  Also, the PPF task may create an activity document where we want a specific user id to be shown.
    I believe the answer is no, but was wondering if anyone else out there was able to do this or had other ideas?
    Thanks.
    Mike

    Thank you, PK!
    That helped us look at our system and we do see a logical RFC connection we set up 6 years ago for workflow for when we went live.  So that did help us some.
    If we set up this logical connection, do you know how we can tie the ABAP RFC that we set up in BRF to use that logical connection? 
    Thanks.
    Mike

  • Change user for bckground job

    Hi all,
    Right now BI jobs (daily, weekly, monthly, process chains etc) are scheduled under the SAP user's id. My organization is changing these names to employee ids and hence they are knocking off the existing SAP user ids. Obviously the jobs will get stuck.
    Now, my question is  ...
    1. what is the std. user under which the jobs should run ?
    2. How do I convert all the existing jobs that are under various SAP users to a std BW username? what is the procedure ?
    Thanks.

    Vaishali,
    I don't know of any "standard" user ID for this. You can just create your own user for this purpose. We called it "BWBATCH".
    Our Basis guys took care of changing the user id running the processes. Check with your Basis Team.
    But since we wanted this ID to be not only the one running the jobs but also the one owning them we just logged as this user in the system and rescheduled all the jobs. Now he's the owner and the "runner" too...
    Hope this helps.
    Regards,
    Luis

  • Browser configuration is not visible in options of browser for Torch 9800

    I have recently bought Torch 9800 and I have upgraded my plant to use browser services.
    Problem arised when I tried to upgrade Blackberry App World, while downloading my phone automatically rebooted.
    After reboot there was no icon for Blackberry App World and also I couldnt browse.
    So I checked with my service provider and they asked me to check my browser settings,
    to my misery now there is no 'Browser Configuration' in option menu.
    Please somebody help me with this...I am really stuck as SP says nothing they can do about it.

    Hi. I tried it, but it did not help. :(
    It is strange. Before I had the error in log:
    Unable to rename '/appl/ucm_cluster/server/weblayout/resources/schema.work' to '/appl/ucm_cluster/server/weblayout/resources/schema' while publishing schema.
    When I looked into the 'schema' dir there was old doctypes in js file
    In 'shcema.work' which was supposed to be renamed to 'schema' there was my correct document type in js file.
    Now in /server/weblayout/resources/schema/views/doctypes/all.js file there is only my correct document type but i still have in gui the old wrong doctypes! :(

  • Hot spot for torch 9800

    Hi All
    Can I upgrade a torch 9800 to enable hotspot?
    I have done it with the torch 9810 - but seem to have trouble with the 9800 - any thoughts?
    Thanks

    Hot spot on blackberry is only available for device running on os 7.1 upward

  • New battery for Torch 9800

    I need a UK supplier for a NEW torch 9800 battery - having amazing difficulty finding one.
    Blackberry do not seem to provide one.

    Amazon is always a first thought. Have you already checked? Is it an option for you?
    I expect an online purchase is going to be your only recourse. I don't know best sources for UK, however. See what others say.
    - Ira

  • Sun Java Virtual Machine for Torch 9800

    Hi All This is my first message on Blackberry Forum. Hope I can resolve my problems easily. Most of the Java games not working in my Torch 9800.  All of them can install but getting errors. Apps are working well but games are not working. How can I fix this?
    I used Sony Ericsson K300i before. Games and apps are working perfectly. But I can't understand why Blackberry doesn't support? Hope someone's help on this matter.
    Thanks
      

    This maybe old but i have the same question.

  • Port number for torch 9800

    I want to run an ip camer through my Blackberry Torch 9800 thorugh an app which needs the port number of my device which i don't know. Please guide me how to find the port number of my device

    That is the workspace URL, do you mean workspace ?
    it will usually be http://<workspace_server>:19000/workspace/index.jsp or http://<workspace_server>/workspace/index.jsp
    FR web port is usually 8200
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for