Changing values in grid

Is there a way of changing values in grid using radio buttons
or dropdown list?

Yes, exactly that however I would like to be able to change
values from either radio button selection or dropdown list.
From my research on the web I found that flash forms won't
list values in a drop down box only the applet version will handle
the dropdown selection.
Since your are from the adobe. Could you let me know of a
best way or practice to debug flash forms. It is time consuming to
trouble shoot since all you got is a blank page.
Does Flex 2 takes care of all the limits of CFFORMS?
could you elaborate on this.
Thanks

Similar Messages

How to capture changed value in ALV Grid

Hi Guys,
I have an ALV grid report where I have 'Edit On' for one of the quantity fields in the report. How do I capture the new (changed) value in the suboutine for user command when user changes the value in the report and clicks on a button ?
Points assured for helpful replies.

FORM USER_COMMAND USING P_UCOMM LIKE SY-UCOMM...........
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data
ENDFORM.
Also chk the blog
/people/community.user/blog/2007/01/10/displaychange-mode-of-editable-fields-in-alv-using-function-modules-but-not-custom-containers

Urgent..getting default & changed values in ALV editable....have ur point.s

Hi all,
I m using interactive ALV grid with 1 column editable with some default values, When i m clicking on SAVE button, only the values which are changed by the user in that column are coming in the internal table, & the default values are automatically deleted by the following code....
But my requirement is to save all the default & changed values of the ALV column....
Help me out & have ur points.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
importing
 e_grid = ref1
CALL METHOD ref1->check_changed_data
IMPORTING
 e_valid =
CHANGING
 c_refresh = 'X'

Pradeep,
When ur doing the CHECK_CHANGED_DATA, u ll get the edited values inside this callback sub -routine only. so here u trap the values those are changed ( thats after editing).
Once the control goes back to the original program ( calling prog ) , u ll end up with ur old data ( before editing).
you ll have to handle that explictly in your code, or shift to OO alv grid like this -
REPORT ZSKC_GRID.
TABLES : EQUI.
DATA : BEGIN OF T_EQUI OCCURS 0,
 EQUNR TYPE EQUI-EQUNR,
 AENAM TYPE EQUI-AENAM,
 END OF T_EQUI.
DATA : T_FCAT TYPE LVC_T_FCAT,
 G_FCODE TYPE SY-UCOMM.
DATA : G_GRID TYPE REF TO CL_GUI_ALV_GRID.
SELECT-OPTIONS: S_EQUNR FOR EQUI-EQUNR.
START-OF-SELECTION.
* get data.
PERFORM SUB_GET_DATA.
* Populate catalog.
PERFORM SUB_BUILD_CATALOG CHANGING T_FCAT.
* Display the grid.
PERFORM SUB_SHOW_GRID.
CALL SCREEN 9001.
*& Form SUB_GET_DATA
* Get data
FORM SUB_GET_DATA .
SELECT EQUNR AENAM
FROM EQUI
INTO TABLE T_EQUI
WHERE EQUNR IN S_EQUNR.
IF SY-SUBRC NE 0.
* Give some message if needed
ENDIF.
ENDFORM. " SUB_GET_DATA
*& Form SUB_BUILD_CATALOG
* text
* <--P_T_FCAT text
FORM SUB_BUILD_CATALOG CHANGING PT_FCAT TYPE LVC_T_FCAT.
DATA : WA_CAT TYPE LVC_S_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'EQUNR'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'EQUNR'.
WA_CAT-REF_TABLE = 'EQUI'.
APPEND WA_CAT TO PT_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'AENAM'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'AENAM'.
WA_CAT-REF_TABLE = 'EQUI'.
WA_CAT-EDIT = 'X'.
APPEND WA_CAT TO PT_FCAT.
ENDFORM. " SUB_BUILD_CATALOG
*& Form SUB_SHOW_GRID
* Show grid
FORM SUB_SHOW_GRID .
* create the Grid Object.
CREATE OBJECT G_GRID
 EXPORTING
 I_PARENT = CL_GUI_CONTAINER=>SCREEN0
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 OTHERS = 5.
CHECK SY-SUBRC EQ 0.
* Display contents,
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 CHANGING
 IT_OUTTAB = t_equi[]
 IT_FIELDCATALOG = t_fcat
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4.
ENDFORM. " SUB_SHOW_GRID
*& Module STATUS_9001 OUTPUT
* text
MODULE STATUS_9001 OUTPUT.
 SET PF-STATUS 'PF_9001'.
 SET TITLEBAR 'TITLE_9001'.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9001 INPUT
* text
MODULE USER_COMMAND_9001 INPUT.
CASE G_FCODE.
 WHEN 'BACK' OR 'CANC' OR 'EXIT'.
 LEAVE TO SCREEN 0.
 WHEN 'HAVE'.
* After editing everything user presses this button.
 PERFORM SUB_GET_EDITED_DATA.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Form SUB_GET_EDITED_DATA
* Read the ALV grid and get current internal table.
FORM SUB_GET_EDITED_DATA .
DATA : T_OLD_DATA LIKE T_EQUI OCCURS 0.
* hold the old values if u need them.
t_old_data[] = t_equi[].
* This will update the global internal table.
CALL METHOD G_GRID->CHECK_CHANGED_DATA.
* Now t_equi have changed here. u have the old data in the T_OLD_DATA.
BREAK-POINT.
ENDFORM. " SUB_GET_EDITED_DATA
Create a blank screen called 9001. and Pf-staus has a buton with fcode "HAVE". ( alongwith BACK canc exit).

Change Value While Uploading data From Excel File

Dear Expert,
Please guide me is it Possible?, if yes then How?
We have one BDC Uploader there After uploading data from Excel File, i want to check one field like this....
if it_f65data-newbs contains any Alphabet.
then user Should be able to change value on the same time while executing Program in table.
Please tell me how i can change value in running program
Regards'
Shelly Malik

Hi,
What you can probably do is, perform a consistency check on your data in the internal table and segregate all those rows that have inconsistent data (in your case, the field NEWBS containing albhabets) into another temporary internal table. Display the temporary internal table in an editable ALV grid saying that these data have not been inserted to the database, coz they have inconsistent data in the field NEWBS. Allow the user to edit and then save the data which will consequently refresh the internal table contents.

Change value of a typedef in parallels to another running action

Hello,
Well, I have a problem with my VI.
To summarize I use a Vi « IdsVg.vi » to achieve some measurements process.
This one uses an action engine as a sub-vi to store data of the front panel and to precede complementary actions. The front panel is a strict typedef…
I programmed the Vi avoiding to use sequence structures in order to be able to do other actions on the front panel in parallels. Nevertheless I’m running out of ideas for solving my problem.
The problem:
I would like to change values (time constant, Boolean of graph) of the front panel at any instant when the main vi is running. The actual problem is: when I start the program, using register event I can change values of the front panel, but when the program is running the while loop in which it gets the measurement, it isn’t possible to change parameter of the front panel…
Is there a solution or a trick??
Thank you for help
Attachments:
MyProblem.lvproj ‏10 KB

Putting in the project file does not help much, good try though. The actual files are missing though, so nothing shows up.
I suggest you create a separate producer consumer loop in your main vi. The vi retrieving the data could pass the relevant data (producer) and the consumer loop will then process the data and update the fron tpannel. Note, only the producer consumer loop will update the front pannel.
You would not need a sequence structure to control the update. The producer consumer loop will only execute when you provide the necessary data.

Getting change values from a collection

Title says it all. I have a collection connected to a
datagrid and have a simple form that allows me to add/modify/delete
entries from the collection. Now I want to send the changes to the
collection back to the server. How do I read/parse the collection
for these changes? Examples would be helpful. Below is what I have
so far to examine the collection (found elsewhere) how do I extract
the name/value pairs that have changed?
public function
collectionEventHandler(event:CollectionEvent):void {
switch(event.kind) {
case CollectionEventKind.ADD:
addLog("Item "+ event.location + " added");
break;
case CollectionEventKind.REMOVE:
addLog("Item "+ event.location + " removed");
break;
case CollectionEventKind.REPLACE:
addLog("Item "+ event.location + " Replaced");
break;
case CollectionEventKind.UPDATE:
addLog("Item updated");
break;
}

ArrayCollection supports the length property, so you can
simply iterate over it with a for loop and use the bracket notation
to return each item. Build the structure you want to sent, then
away you go.
If you are wanting to only select changed values, you will
have to track this yourself.
Tracy

Values From Grid

Hi All,
How can I get the values from Grid. I would like to take a cell value from a selected row directly from grid instead of DataTable.

Hi All,
The above stated queries is somewhat true. we can take values directly from grid. we have to use datatable. I tried datatable also but it does not give the values selected values when collapse level is set.
When we set the collapse level, datarow arrange as per the collapse level on the fly. lets take an example
In datatable rows are like
1   A    B
2   A    B1
3   B    C1
4   C    C1
5   C    BV
when we set the collapse level rows are like
1
      ..A...
            .. B...
           .. B1..
      ..B..
              ..C1..
     .. C..
              ...C1..
              ...BV..
like this..... In this case when I select the datarow from grid. it gives me row of selected index and the selected row does not match with the datarow position in datatable. Hence values varies.....
Edited by: Manish Chourasia on Aug 20, 2008 6:45 AM

Smartview 11.1.2.5- Cannot change value in Text-List Dropdowns- Excel Crashes

Using latest/greatest Smartview with 64-bit Office and Windows 7. I have a native essbase app utilizing text-lists. I am trying to update text-value through smartview. Smartview automatically produces a drop down to select a value from the linked text-list. However- as soon as a different value is entered or selcted in this cell with the drop-down list- Excel crashs. I have reproduced this consistently everytime. I have no way to change values for text-measure accounts linked to text-lists. I feel this is and incompatabiliyt issue with office 64-bit.

SmartView using the forms. It appears this issue has been logged as issue number 6566082 as seen here: http://docs.oracle.com/cd/E17236_01/epm.1112/readme/sv_1112200_readme.html
But I can't seem to find out where I can get information on the status of this issue and whether it's been patched in future versions.

Not able to get changed values in the SAVE EVENT in ServHPartnerDet view

Hi Experts,
I am new CRM WEB IC, i have requirement like need to access four IBASE fields from BupaIbaseDetail and need to display those fiedls in ServHPartnerDet view. I am able display the fields and its values in the target view. But when user press change button and changes those four fields and press save button not able get the changed values in to the SAVE EVENT.Anyone please help me in this.
IBHEADER , IBASEADDRESS are the CONTEXT NODE CREATED in target view. I have binded IBHEADER to CuCoIbase custom controller and getting four fields data from IBASEADDRESS. below is the code for CREATE_CONTEXT_NODES.
METHOD create_ibaseaddress.
DATA:
    model        TYPE REF TO if_bsp_model,
    coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
    entity       TYPE REF TO cl_crm_bol_entity,              "#EC *
    entity_col   TYPE REF TO if_bol_entity_col.             "#EC *
model = owner->create_model(
      class_name     = 'ZL_CRM_IC_SERVHPDET_CN00'
      model_id       = 'IBaseAddress' ).                    "#EC NOTEXT
ibaseaddress ?= model.
CLEAR model.
coll_wrapper =
    ibheader->get_collection_wrapper( ).
TRY.
      entity ?= coll_wrapper->get_current( ).
    CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
    TRY.
        entity_col = entity->get_related_entities(
                        iv_relation_name = 'FirstLevelComponent' ).
      CATCH cx_crm_genil_model_error.
    ENDTRY.
    TRY.
        entity ?= entity_col->get_current( ).
      CATCH cx_sy_move_cast_error.
    ENDTRY.
    CLEAR entity_col.
    IF entity IS BOUND.
      TRY.
          entity_col = entity->get_related_entities(
                          iv_relation_name = 'ComponentAddress' ).
          ibaseaddress->set_collection( entity_col ).
        CATCH cx_crm_genil_model_error.
      ENDTRY.
    ENDIF.
ENDIF.
ENDMETHOD.

Code i have written in the CREATE_CONTEXT_NODE method for my custom context nodes( IBHEADER,IBASEADDRESS).
this CREATE_IBHEADER some data related to IBASE header then from this reading the IBASEADDRESS contextnode fields for displaying in the ServHPartnerDet. It is working fine but After changing the four fields values in the ServHPartnerDet view and trying to save, then context is not reading the new values it gives the old values only.
TRY.
      lr_coll_wr = ztyped_context->ibaseaddress->get_collection_wrapper( ).
      IF lr_coll_wr IS BOUND.
        lr_entity ?= lr_coll_wr->get_current( ).
      ENDIF.
    CATCH cx_crm_genil_model_error.
ENDTRY.
CALL METHOD lr_entity->if_bol_bo_property_access~get_property_as_value
    EXPORTING
      iv_attr_name = 'BUILDING'
    IMPORTING
      ev_result    = lw_building.
the building has got result of old value no the new value.
method CREATE_IBHEADER.
    DATA:
      model        TYPE REF TO if_bsp_model,
      coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
      entity       TYPE REF TO cl_crm_bol_entity,    "#EC *
      entity_col   TYPE REF TO if_bol_entity_col.    "#EC *
    model = owner->create_model(
        class_name     = 'ZL_CRM_IC_SERVHPDET_CN01'
        model_id       = 'IBHEADER' ). "#EC NOTEXT
    IBHEADER ?= model.
    CLEAR model.
bind to custom controller
DATA:
      cuco TYPE REF TO cl_crm_ic_cucoibase_impl,
      cnode TYPE REF TO cl_bsp_wd_context_node.
cuco ?= owner->get_custom_controller(
        'CuCoIbase' ).                                      "#EC NOTEXT
cnode ?=
    cuco->typed_context->ibaseheader.
coll_wrapper = cnode->get_collection_wrapper( ).
ibheader->set_collection_wrapper( coll_wrapper ).
endmethod.

How to change value of instance variable and local variable at run time?

As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
Suppose I have a class, say employee like -
class employee {
public String name;
employee(String name){
this.name = name;
public int showSalary(){
int salary = 10000;
return salary;
public String showName()
return name;
i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
Can someone tell me how to change these value?
Please help
Regards,
Sujeet Sharma

This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

How to change value date from posting date to net due date

Hi Gurus,
My client wants to change value date from posting date to net due date. currently posting date is considered as value date but in future client wants to change value date to net due date of documents.
1. what configurations need to be maintained to change value date from posting date to net due date.
2. Will these changes effect automatic payment run.
Thanks and Regards,
Suresh

Hi Suresh,
In Future
While posting the documents you can mention the value date as due date of the documents.
For already posted documents
You can change the value date to net due date.
If the value date is display mode i.e. if you are not able to change the value date in FB02 (Document Change Mode), use OB32 transaction and make value date field as eidtable (BSEG-VALUT).
In OB32 transaction enter all the required fields like Account type, transaction type, company code and finally activate the Field can be changed check box.
But not sure, whether we can change the value date to previous date or not?
This would help you..
Regards,
Praisty
Edited by: Praisty on Jul 28, 2009 9:56 AM

Changing value in drop-down based on selected value in another drop-down

Hi,
I have two drop-downs - changing value in Combo1, should cause the form to be submitted and values to be populated in Combo 2.
Approaches i tried - 1) I am using an ActionListener. I am having a valueChange method which accepts an action event. However this appraoch is not working for me. 2) I was wondering if I could use Javacsript to catch the OnChange event , the javascript function would call an appropirate method in my ActionListener. I know in Struts its straightforward, but how do i achive the same here in JSF.
Any tips would be helpful.
Thanks
PS: I already came across some threads in the forum, but could not get an answer. Also, I have a retsriction in terms of using Action LIsteners itself.

Try using ValueChangeListener instead of ActionListener.
Here's a working example of a ValueChangeListener. You can customize it and use it for your application.
The JSP will look like this:
 <h:selectOneMenu value="#{globalsBean.selectedFirst}"
 valueChangeListener="#{globalsBean.changeList}" onchange="submit()">
 <f:selectItems value="#{globalsBean.first}" />
 </h:selectOneMenu>
 <h:selectOneMenu value="#{globalsBean.selectedSecond}">
 <f:selectItems value="#{globalsBean.second}" />
 </h:selectOneMenu>The globalsBean will look like this:
public class GlobalsBean extends Bean {
 ArrayList first;
 ArrayList second;
 String selectedFirst;
 String selectedSecond;
 public GlobalsBean() {
 first = new ArrayList();
 second = new ArrayList();
 first.add(new SelectItem("1", "1"));
 first.add(new SelectItem("2", "2"));
 selectedFirst = "1";
 selectedSecond = "";
 second.add(new SelectItem("White", "White Cows"));
 second.add(new SelectItem("Brown", "Brown Cows"));
 second.add(new SelectItem("Green", "Green Cows?!?"));
 public ArrayList getFirst() {
 return first;
 public ArrayList getSecond() {
 return second;
 public String getSelectedFirst() {
 return selectedFirst;
 public void setSelectedFirst(String selected) {
 selectedFirst = selected;
 public String getSelectedSecond() {
 return selectedSecond;
 public void setSelectedSecond(String selected) {
 selectedSecond = selected;
 public void changeList(ValueChangeEvent event) throws AbortProcessingException{
 second = new ArrayList();
 String newValue = (String)event.getNewValue();
 setSelectedFirst(newValue);
 if (newValue.equals("1")) {
 second.add(new SelectItem("White", "White Cows"));
 second.add(new SelectItem("Brown", "Brown Cows"));
 second.add(new SelectItem("Green", "Green Cows?!?"));
 } else if (newValue.equals("2")) {
 second.add(new SelectItem("White/Black", "White Cows with Black spots"));
 second.add(new SelectItem("Black", "Black Cows"));
 setSelectedSecond("");
}Let me know how it works out for you.
CowKing

Swf in IE 7 not changing value when variable value in flashvar changes...

Hi Friends,
Below is decription of the file
1. I have a flash file which is loading php variable through flash vars.
2. The flash var variable contains the .txt filename in which data is kept.
3. When I open the php page the swf loads with variable having .txt filename and value containing swf path.
4. I have created timer in flash which check for change of value.
5. When value changes the other flash file loads.
6. All this works fine in all browsers except IE 7
ONLY ISSUE WITH IE 7 is
1. The swf not changing when value changes.
WHAT I NOTICED
1. When we click to load another tab in the same IE 7 browser the changed value that is another swf loads.
WHAT I THINK
1. Refreshing browser when value changes will solve the issue in IE7.
Pls. let me know your suggestion and if possible solution to this issue.
Thanks in advance.
With Regards,
Sagar S. Ranpise

copy and paste your embedding html code.

Delta Extractor Is not picking changed values

Hi All,
When the values or texts in a PO are changed the delta extractor is picking up the changed values as deltas (provided the changes where done in PO Header or Item Overview) but when a PO values or text that are changed in the Item Details the delta mechanism is not picking up the changed values (the fields whose values are changed were initially not in the LO Cockpit Extractor they where added and the values to these fields are populated using an ABAP Program)
Is there a reason that Delta mechanism doesn't work for fields that are not delivered by the SAP Extractor or do we need to modify the code in order to collect these changed values by Delta Mechanism (Direct Delta as the Update Mode).
Please let me know if anybody came across the same problem .
Thank you all in advance.
Regards,
Dhanam

Hi,
this is another story.....
You'll have to
- enhance the PO items table (EKPO) with your fields
- activate the right customer exit for purchase orders (search in SMOD; or in this forum..) and populate your fields during this exit. if the field needs to be maintainable by the R3 user, you'll have find a SAP exit (again SMOD) in order customize one of the screen and populate your fields in R3.
- use another exit to populate the new fields to LO delta queue
- enhance your BW extract structure (done)
- and so on...
As you can imagine, the above get quite more complicated (an expert in MM shall support you) and it needs to be approved by the PM since you'll modify R3.
But that's basically it!
hope this helps...
Olivier.

Save SELECT_LIST_FROM_QUERY changed value

Hello.
We have a tabular form with APEX_ITEM.SELECT_LIST_FROM_QUERY LOV as item in query.
List shows in forms as expected.
Column attribute is set to Display as Text (based on LOV, does not save state).
Now users want to save LOV value when they change it.
What value must be set in column attribute, so the changed value can be saved.
We tried all the other settings, but then the LOV isn't displayed correctly or it doesn't work.
Maybe APEX_ITEM.SELECT_LIST_FROM_QUERY LOV changed value can't be saved in tabular form?
Any idea?
Thanks.
Regards,
Dejan

Hello.
For one column in my tabular form i need "select list".
I can create my own LOV and set column to "select list (named LOV)".
But my LOV must have where sentence which uses another column value (from the same row).
And that value can be different in every row - that means that LOV will be different in every row.
But i can't (or don't know) how to write where with another column value in it - for LOV.
Thanks.
Regards,
Dejan

Changing values in grid

Similar Messages

Maybe you are looking for