Changing Video and Audio Formats

Hi
Can I use JMF to convert videos and audio from one format to another?
Regards,
N�stor Bosc�n

Yes you can, I'm struggling to do just than, with audio captured from a mic to mp3 file, and also from mp3 file to wav file.
Message was edited by:
MuadDib

Similar Messages

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Premiere Pro 2.0 compatable video and audio formats

I am working on a project that uses old vintage newreel clips and such from the 50's and 60's, they are available for download in several different formats.
I have downloaded many of them but when i import them into my timeline, there is no audio for these clips. They work when i just play them out of premiere. What are the supported formats for premiere pro 2 both in video and audio?
I have made several movies but haven't come upon this issue before.

Welcome to the forums.
The following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
FAQ:Why is there no audio in my imported MPEG file?
Cheers
Eddie

Video and Audio Format Conversion

Hello,
I recently bought a Macbook, and I am wondering if there are apps available that can convert audio and video.
I used VirtualDubMod on the PC to edit video, Audacity to edit audio, and SUPER to convert formats of the edited audio/video.
Are there similar apps available for the Mac? (All of the above are free apps too!)
Thanks,
Abid

Check here for what you are interested in. Some of them are free.
http://www.pure-mac.com/video.html
http://www.pure-mac.com/audio.html

Best video and audio converter that contains most format at mac app store

Dear All;
What is the best video and audio converter that contains most format at mac app store?Can you suggest any on Mac App Store?
Regards;

I use Wondreshare's dvd ripper. I travel for a living, so the $60 or $70 I spent to rip my entire dvd collection onto an external hard drive that I can take anywhere I go. Their software isn't available in the App Store to my knowledge but I have had it for a couple years now without any trouble.

Internet streamed Video and Audio Lag when I roll over buttons/change tabs

Well just as the title suggests when I am watching videos online, aka youtube, hulu, etc, everything runs fine. But if I decide that I also want to check my facebook or something similar while watching these movies, the video and audio become choppy, even to the point where my audio will become distorted, and the video will just plain freeze. I'm wondering if this is a computer issue and if so how can I fix it?
I'm on a late 2007 13" white macbook, with a 2.16 GHz Intel Core 2 Duo and 2GB of RAM. I'm also using Google Chrome, but it also happens on Safari.

Well just as the title suggests when I am watching videos online, aka youtube, hulu, etc, everything runs fine. But if I decide that I also want to check my facebook or something similar while watching these movies, the video and audio become choppy, even to the point where my audio will become distorted, and the video will just plain freeze. I'm wondering if this is a computer issue and if so how can I fix it?
I'm on a late 2007 13" white macbook, with a 2.16 GHz Intel Core 2 Duo and 2GB of RAM. I'm also using Google Chrome, but it also happens on Safari.

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

Video and audio transmission from MacBook to TV

Since I really get mixed up with various posts about connecting MacBooks to a TV set I would love to get simple answers to the following questions:
How can I connect my MacBook to a TV so that I have video and audio rendering? My MacBook has a mini-DVi output, my TV set has VGA, HDMI, and audio inputs. Since to my knowledge HDI carries no audio signals I suspect that I need an extra audio connection. Is this true?

to rapanuii
depending on your macbook model you may need a "converter", meritline.com/mini-hdmi-to-cvbs-converter-adapter---p-83103.aspx?source=fghdac& gclid=CO7J9NSU67QCFWGnPAodRBsAAw similar to this. Use a mini DVI to HDMI apple adaptor. if you have RGB connectors on your tv you want http://www.monoprice.com/products/product.asp?seq=1&format=2&p_id=8125&CAWELAID= 1329456201&cagpspn=pla&gclid=CKW25beg67QCFaGPPAodRHAAfg

Video and audio (in one direction only) deteriorate after about 90 seconds

I begin a two-way video chat as normal, both parties can see and hear clearly. After about one and a half minutes of normal video chat, the person on the other end suddenly starts getting a highly pixelated image of me, and they start to lose chunks of audio from me. Meanwhile I continue to get a very nice clear video and audio from them. We usually end up closing the chat, because they are unable to hear or see me enough to continue.
The first 1.5 minutes or so is always clear, it starts after that. I always receive good audio and sound from the other party throughout the chat. I have never had problems receiving video/audio.
It happens with most (but not all) people I connect to. I am in California, and I always have this trouble when connecting to a relative in Connecticut. I have the problem again with one relative in Sydney Australia, but not with a different relative in Sydney. These are just a few examples by location.
I have repeatedly tested my connection speeds, and I have good up and down speeds - more than the minimum requirements. (My speed today is 8200 kb/s Down, 1309 kb/s up).
I have also tried:
Checking my Quicktime settings - (set to 1.5 Mbps T1/Intranet/LAN)
Bypassing my Airport modem/router, by connecting directly by ethernet to my Comcast cable modem (which has no router built in)
Replaced the cable modem with a brand new one.
Changed locations - tried it at a friend's house, still had the same problem.
So, I think I have isolated the problem to my PowerBook. This PowerBook used to do iChats really well for at least 18 months. I have been having this issue for about 5 or 6 months now. I have no idea what the problem could be. Any tips would be much appreciated.
Thanks, Martin
My setup:
ISP: Comcast Cable (Cable modem)
Apple Airport Exteme Base Station
Powerbook G4 1.67Ghz, 1 GB RAM, 80 GB HD
O/S: Tiger 10.4.10
iChat 3.1.8 (with Chax)
External iSight camera

With Comcast.
Try rebooting the Modem.
This seems to refresh the connection in some manner.
Also speak to them. They may not admit any connection management but thing may "magically" get better.
1:17 PM Wednesday; August 29, 2007

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

How do I get Video and Audio Chats with PCs ?: FAQ 3

How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
Ralph

Hi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

Changing Video and Audio Formats

Similar Messages

Maybe you are looking for