Changing volume on bounced track

trying to lower the volume on track i am trying to bounce. it's too hot. i've tried lowering the volume on the track in the mixer but the bounced track is unchanged. tried lowering the gain and still no significant change. something this basic shouldn't be this complicated. i'm new to logic from sonar on a pc which was sooooooo user friendly compared to logic. ***. can anyone help.

Check Track Automation and delete any stray nodes on the track. Set the optimum level and re-bounce.

Similar Messages

Is there a way to change the volume of a track in the middle of a song on iPhone?

I am writing some songs, but I don't know if I can change the volume of certain tracks during certain parts of the song. I know you can change them for the WHOLE THING, but I want to drop down the volume of the background instruments, so I can start the solos much better.

Hi this is said to be working but I haven't tested it:
if (sequencer instanceof Synthesizer)
     Synthesizer synthesizer = (Synthesizer)sequencer;
     MidiChannel[] channels = synthesizer.getChannels();
     // gain is a value between 0 and 1.
     for (int i=0; i<channels.length; i++)
          channels.controlChange(7, (int)(gain * 127.0));
Klint

How do I boost the volume of a track, and a section within the track?

Thanks for any help.
I'm fairly new to logic and I'm trying to figure out how to boost the volume of a track. I know how to adjust it in the mix, but I have some imported audio files that still aren't loud enough overall. Is there a way to "boost" the volume of the track, so that it adds dB levels to the track overall? Not just turning the level of the track up, but actually boosting the volume of what's in the track? I turn it all the way up to 6.0, and it still isn't loud enough... I'd rather not have to double the track.
Also, is there a way to boost the volume of certain sections of the track, besides using automation?
Any help is greatly appreciated!!
Chris

First, welcome to the Apple Discussion Forums!
Try this. Double click on the track and the Sample Editor will come up. Select the section you want to boost and select Functions -> Change Gain. But keep in mind, boosting the signal will also boost the noise.
Hope this helps.

Why are my piano roll changes not being bounced down? Help!

I'm trying to make some minor changes to a click track sound. Just moved it down a key in piano roll, but no matter what I do, it doesn't seem to take in the final bounce down. Any ideas anyone?
Thanks.
Jabo

Think of the arrow pointing from large to small, so the wide fat or large end of the arrow is at the top and the sharp pointy or small end is at the bottom. So it will sort from large to small and alaphbetically Z is larger than A. Click the Name bar and the arrow will reverse with sharp pointy end, small, at the top and large fat end at the bottom so it will now sort A to Z, as A is deemed to be smaller than Z.
Hope that helps?
Phil

How do you change volume permissions with Solaris Volume Manager?

(Previously posted in "Talk to the Sysop" - no replies)
I'm trying to set up Solaris 9 to run Oracle on raw partitions. I have my design nailed down and I have built all the raw partitions I need as soft partitions on top of RAID 1 volumes. All this is built using Solaris Volume Manager (SVM).
However, all the partitions are still owned by root. Before I can create my Oracle database, I need to change the owner of the Oracle partitions to oracle:oinstall. The only reference I found telling me how to do this was in a Sun Blueprint and it essentially said "You can't change volume permissions directly or permanently using SVM and chown will only remain effective until the next reboot. To make the changes permanent, you must modify /etc/minor_perm". Unfortunately, I can't find an example of how to do this anywhere and the online man pages are not particularly helpful (at least not to me).
I'd appreciate a quick pointer, either to a good online resource or, even better, a simple example. For background, the volumes Oracle needs to own are:
/dev/md/rdsk/d101-109
/dev/md/rdsk/d201-203
/dev/md/rdsk/d301-303
/dev/md/rdsk/d401-403
/dev/md/rdsk/d501-505
I provide this information because I'd like to assign some, but not all, of the devices under /dev/md/rdsk to the oracle user and I was hoping some smart person out there could illustrate an approach using simle regular expressions, at which I'm horribly poor.
Thanks in advance,
Adrian

Ron, I feel your pain. I just came from an HTC also and a lot of stuff with this iPhone is bugging the crap out of me. Who makes a phone where you can't adjust the ringer and alert volumes independently? Instead, I have to adjust the alert volume when it is active. C'mon guys. Get with the program. You won a bunch of Android users over with the 4S, but you're going to chase us all back when we're done with our contract. Frustrating.

Flashplayer freezes for 5 seconds on changing volume or any other setting

On changing volume or any other setting while watching video, Flashplayer freezes for about 5 seconds then continues as normal.
(Windows 7 and Mozilla Firefox)

Hi,
You don't need iChat.
It should not be on there at all.
If the iCon in the DOCK looks like this then it is linked to iChat 4.
You should be able to Right/Control click that and get it to "Show in Finder"
Messages looks like this .
Launch Messages and set Bandwidth (Same place with the Preferences)
7:45 PM Thursday; September 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Change a non-looping track to looping

I'm using STP 2.0.2
I also just started reading Apple Pro Training Series 'Soundtrack Pro' by Mary Plummer.
It seems my interface is not the same as what she shows in the book. Doesn't state what version STP it's referencing.
Questions and confusion so far are:
1. I can't find anywhere a way to change a non-looping track to looping. It's not in the clip drop-down or when I right-click the clip in the timeline.
2. I can't find the format button (it's not on the top tools bar next to the sample rate selector). I can only change beats/time-based from the Multitrack drop-down.

That book is from 2006. I'm sure it's version 1. You should update to v3 anyway. It's being more stable, especially under Snow Leopard.

How do I manually change the genre or track name

I'm new here, so forgive me if this is easily done. I would like to know how to manually change a song's track name, or genre in iTunes. If i feel like a song is more appropriately labeled "pop" vs "rock" can I change the label? Any help would be greatly appreciated. Also, i'd like to be able to do the same with track names. Thanks.

Right click on the track you want to change. Choose Get Info and then the Info Tab. You can change the song name, artist, genre etc. in there.
You can also update multiple items, however beforehand you sort your tracks into the order you want, say for instance by Artist. Click on the first track you want to change, hold down the shift key and click on the last you want to change and all the tracks in between will be selected. After that it's right click etc as above.
You'll get a lot more on using iTunes here: http://www.apple.com/support/ipod101/tunes/ Lesson two includes changing track information.

Does FND:Developer Mode Profile Option changes requires apache bounce?

Hi All,
Am getting the following warning message in one of my page. Observed that, the profile option value FND: Developer Mode in the instance is Yes. I have changed it to NO since the recommended settings of this profile option is NO as Oracle stated in the Developer Guide. But, still am getting the warning message. Does this change require apache bounce or am I missing anything to get rid of error?
+++
Query has exceeded 500 rows. Potentially more rows exist. please restrict your query
+++
Note: I have checked all the VO in this page, but, none of the query behaves returns more than 500 rows. None of the VOs executed blindly.
Regards,
Soorya

Saurabh,
I got a clue on this issue. Not sure, will it be helpful.
User clicks on the base page link, which takes him to details page. When i redirect the user from base page to details page, am setting the retainAM value as Y as one of the parameter of the link url.
Am getting the warning message when the value of retainAM is Y. If it is N, it is not throwing the warning message. Any idea, what could be the reason?.
I feel, it might execute the VO's in the AM. Is my guess make sense?
Regards, Soorya

Volume within a track in garageband

how do I adjust the volume within a track in the new garageband? I think it's called curving?

battenberg wrote:
how do I adjust the volume within a track in the new garageband? I think it's called curving?
you're thinking of an auomation curve. turn it on from above the track headers, then you can adjust the volume line in a track

My I pod will not display volume bar or track time.

I have an Ipod Nano, but all of a sudden it quit showing the volume bar and track times of my songs. In place of the track times are 5 dots going across the bottom of the screen. Does anyone know what is going on? Any help would be greatly appreciated.

To Michal,
It's not a problem!
It's the way it is supposed to work!
See the last paragraph on page 24 in the manual:
http://manuals.info.apple.com/en/iPodnano_FeaturesGuide.pdf
"Depending on what type of audio you’re listening to, you can press the Center button repeatedly from the Now Playing screen to get to other information and options, such as the rating screen for songs and audiobooks, album art, podcast information, reading speed, and more. Click the Menu button to return to the previous screen. "
Regards,
Colin R.

Adjusting Volume Levels in Track Volume Editor Question

I have started to experiment with the track volume editor available in the track mixer ...
I set some graph points and adjusted the volume of a track in various areas ..
It all worked great ...
Then I noticed I did not have access to the track volume slider as it was dimmed out ...
With some good advice from hangtime I was able to undim the track volume slider .... but now I have not been able to progress from there ..
When I open the track volume editor of other tracks that have not been tampered with yet ... and move the track volume slider ... I can see the volume line move up and down ...
Now if I go back to the track that I have manipulated the volume ... and move the volume slider ... nothing happens to the volume line.
I am assuming that after you make adjustments in the volume editor you can no longer adjust the initial output line ... Is this correct ..? If so ... what is the point of undimming the blue button?
Also .. I'm kind of sure that I read somewhere that there is a key combination that will reset this volume line to unity .. at least that will let me start over again and give me access to the overall volume ...
Thanks for any help ....

Thanks for the reply ...
So you have to reset the line to enable the fader .... as I mentioned before .. isn't there a key command to do that .. rather than having to delete all the graph points ...?

Changed information on a track reverts to old information on playback

So I add an album to itunes. I then change stuff about the track to my preference (Artist, song title, genre, etc.). Then as soon as the song is played all the information reverts to what it was when I first put it in itunes. This doesn't happen on every track, just random ones.
I had read somewhere to change the ID3 tags to the newest version, so I've been doing that as soon as I put an album in, but it doesn't seem to be helping.

You may have another program messing with the files. The usual culprit is Windows Media Player. Go to WMP Options, and on the Library tab uncheck everything that talks about automatic updates, etc.

Networker how to change volume mode to appendable by command line

I would like to ask how can i change volume mode to appendabel for networker ebs through command line, eg . nsrjb -o nofull -S 2,

It looks like changes to the audio settings alters the com.apple.audio.SystemSettings.plist file.
You can see the difference here:
http://barbatto.com/gu/Picture_2010-01-08_at_1_50_43PM.jpg
I might be able to use "defaults write" to make the change.

ARRGH! Can't Get Bounce Tracks in Place to Work....Advice Needed!

OK, I have Stylus RMX instantiated as a multi-output instance. I have 3 patches loaded, each assigned to a different RMX output, and have added (using the plus sign) additional AUX tracks in the mixer. So I have 3 stereo Auxes basically with sounds coming from Stylus. The 1-2 Outs of RMX are not being used.
When I highlight the RMX track in the Arrange, and just to make sure I also highlight all the other regions on the additional AUX tracks, I choose BOUNCE TRACK IN PLACE. I also choose "Bounce multi outputs to SEPARATE Tracks" option in the dialog.
But all that ends up happening is I get ONE stereo file, of the patch playing on the first two stereo outs. So the other two "Tracks" of patches are not in the bounce, and not on their own separate tracks. It's like this is broken or something.
Anything I'm doing wrong here?
Thanks
Tom

Update:
Further experimentation:
1 Does not work in Kontakt 4
2 Does not work in RMX
3 DOES work in Superior and EZY Drummer.
So it must have something to do with how the plugs are written???
Have reported to Apple...
TH

Changing volume on bounced track

Similar Messages

Maybe you are looking for