Changing volume on my Lumia 920 doesn't work while...

I got this problem just yesterday. Whenever I play a song or a video on my Lumia 920, I can't change the volume while playing it. I can only change it before playing it. What should I do?

Try performing a soft reset by holding both Volume Down and Power buttons pressed until the handset vibrates and reboots. You will not lose any data or settings except Date and Time, which you can readjust manually. Check also that you are up to date with your phone's firmware and all system apps including the music one are also up to date with their latest versions.

Similar Messages

Lumia 920 doesn't do anything

Hi everyone,
My Lumia 920 doesn't do anything at all, when I push the powerbutten it doens't vibrate, the screen is black and I can't hear a sound. Is there anything I could try myself, or do I need to send it to nokia?
thanks for thinking.

There are a few things you can try before sending it off.
Firstly, connect it to a charger and leave it for 30 minutes just in case the battery is so dead that it can't even register the fact that you want to switch on.
If that doesn't bring it back to life then the next thing to try is a soft reset. Simply press and hold the "volume down" and "power/lock" keys together for about 20 seconds. The phone should vibrate and boot up. While your settings, installed apps, media etc. will be preserved, you might have to set the clock again.
If even that doesn't work then the next thing to try is a hard reset. Now, this will erase everything in the phone and make it start in pristine factory state. Hopefully your contacts, messages, photos and apps will have been backed up to SkyDrive, meaning that you should be back up and running again fairly quickly.
Disconnect the charger and wait for a minute. Next, press and hold the "volume down" key while connecting the charger. You should see an exclamation mark on the screen. Then, press in sequence the following keys: "volume up", "volume down", "power/lock" and then "volume down" again. The phone should reinitialise itself.
If none of the above work then you will have to send the phone off for repairs, I'm afraid.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Lumia 920: OneDrive not working after WP8.1 update

After 8.1 update to Lumia 920 OneDrive stopped working totally. In original WP8.0 SkyDrive worked as should.
- In start menu OneDrive icon/tile shows as "greyed out" and does not respond to anything. The only thing one can do is move or unpin the icon/tile.
- In application menu the only option for OneDrive is "pin to start". There is no "rate and review", "share" or "uninstall" available. Therefore cannot uninstall and re-install
- If looking from Store, it does not allow to (re-)install because it thinks that it is already installed!
I can access OneDrive from all my other devices.
I know that there are several people who have updated their 920 succesfully but that information is not very helpful to me. Looking from internet this has happened to a couple of other users too.
What should I do? Good suggestions welcome.
Attachments:
tile.jpg ‏13 KB
appmenu.jpg ‏15 KB

Hi @MrPanda ,
Always in case of trouble with accounts, please double check the time, date and time zone settings on the phone, and verify that there is an active data connection via mobile or Wi-Fi. Also, the strangest problems are sometimes resolved by shutting the phone down and starting it again.
Otherwise, the next steps are:
In Settings -> Mail + Accounts is there a Microsoft account configured, with your email address in small print? - Not a deletable mail account, but the account entered during first setup of the phone. - If so, long press and select Synchronise from the pop up menu.
In case the Microsoft account is missing for whatever reason, then the only option is a factory reset.
If it fails to synchronise, then please post the error code displayed, since that may give useful information.
OneDrive should start working once it has sync'ed ...
Hans
EDIT: A factory reset as suggested by @93tid must solve the problem. It is just that I had to perform a manual MS account sync to have the OneNote and Office Lens apps work properly after the upgrade to WP8.1 - and I wonder if something similar is happening here.

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Inspector > Text > More > Language
Only applies to selected text, like making it a particular font.
It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
Peter

Lumia 920 doesn't charge

I bought my lumia 920 yesterday and while it charges in my car with an USB charging adapter it doesn't so with the delivered ac charger! The curios thing is, my old lumia 900 gets charged with the same one... What can i do?
Solved!
Go to Solution.

Hi Peterp1980,
I tried the charger that came with the iPhone 4 and iPhone 4S, the original one. I know that the 920 charges using the AC-16 charger provided in the box, and that is a 1A. For me, perhaps 2.1A is too much current to charge the phone with, so that would explain its incompatibility.
The 920 doesn't exactly have full support for USB mass storage (unless I'm missing something here....as far as I've seen it only really connects in Media Transfer Protocol Mode), so I have been unable to charge mine through my car stereo's USB port (500mA) like I was able to for my Nokia N8.
Due to the high current of your car charger, and also what I have described with its USB support, knowing which car chargers and third-party chargers will work with the 920, will be a matter of trial and error and user reporting.

My windows phone 8 nokia lumia 920 doesn't show up in finder

I have a macbook pro laptop and want to download some music files to my windows phone from finder. I don't want to use the official windows phone app, where it shows up, but I do not prefer this app because it allows me only to upload full albums to my phone instead of single songs. By the way, it also shows up in iphoto, but not in finder. How can I solve this?

You should use windows phone app. only this way. as for me, i cant move photos from lumia 920 to iphoto. i think, promblem in USB3.0. but i dont want belive in it

Nokia Lumia 920 wifi not working

Hi
My brand new Nokia Lumia 920 cannot connect to my wifi.
It keeps saying that I type the wrong password, which i do not.
All other devices in my house connect just fine.
I have tried switching channel on my router and change from WPA PSK to WEP but nothing helps.
Any suggestions?

I'll link to another discussion that had a resolution that worked for me. This is the only place I saw a resolution for the problem.
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpnetwork/lumia-920-refuses-to-connect-to-wifi...
Basically, I changed my router settings from mixed 802.11 b/g to 802.11 g only. Now it connects, no problem.
Good luck.

Volume control on usb headset doesn't work.

I got myself the Logitech ClearChat Pro USB headset. I've got it to work with the help of http://alsa.opensrc.org/index.php/Hotpl … es_(Howto). I can change the headphone volume with gnome-alsamixer. However, the volume controls located on the headset doesn't work. The controls works in Windows so either it's a configuration issue or it is simply not supported in Linux. Does anyone have experience with this headset or with USB headsets in general?
Thanks.

Mr Green wrote:
http://forums.logitech.com/logitech/boa … ge.id=4655
You may have already seen this.... but
No, I hadn't seen this. As it says that it worked out of the box in Ubuntu, I downloaded the LiveCD and it works indeed as it should after seleting the headset as sound output in the control panel. Afterward, I tried it on my laptop but the controls change the master volume on the onboard soundcard instead of the headset one. So it's just a matter of configuring it. From the articles that I found at http://alsa.opensrc.org/index.php/Main_Page, it seems to be quite complicated from the first glance. I'll try to find an example asound.conf (or ~/.asoundrc). The Ubuntu LiveCD doen't contained these files so I don't know how they did it.
R00KIE: Thanks, but I already found that out and I can change the headset volume from alsamixer. What I want to do is to change it with the volume controls on the headset: http://www.logitech.com/repository/530/jpg/4838.1.0.jpg

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

Lumia 900 doesn't respond while charging

Hi, so basically my AT&T Lumia 900 doesn't respond to my touch during charging. If I unplug the phone it responds fine, but when it's plugged in it can't pick up any of my touch commands. Even if I draw across the screen very slowly I get nothing. I live in New Zealand and we have 240v/50mA power sockets over here but the charger says that's within the range it's supposed to handle. Is this a hardware problem with my phone and how can I fix it?
The phone is running windows phone 7.5 (ver. 7.10.8779.8). Any help would be appreciated, thanks.

I've only received the phone on Thursday and this is the second time charging it (I read somewhere that I should drain the battery completely the first few times to condition the battery, but after finding that some phones bricked themselves when the battery was completely empty I avoided it). In both cases the same thing seems to be happening however the first time was not as severe I feel and I attributed it to the screen protector thing (the "Talking and Driving it can wait" thing from AT&T already attached out of the box). When the phone is at 100% though I have no lag.

Changing adobe ID - Adobe Cloud Manager doesn't work

Hi guys!
I have on my mac Adobe Creative Cloud Manager with all the app installed in English. All work.
I changed my ID with new subscription of all the CC product, but the Manager doesn't recognize what i have installed, so when i try to update, install or uninstall the apps, i can't.
I already try with CC cleaner, but doesn't work...
I already also delete the OOBE folder...
Anyone can help me?

Please refer : http://helpx.adobe.com/creative-suite/kb/troubleshoot-update-issues-cs5-cs5.html#main_Trou bleshoot_Adobe_Application_Manager_problems_or_failures

After installing Mavericks on my MacBook Pro 2009 (japanese keyboard) the layout doesn't work. I mean if I press the @ button the è symbol comes out. I tried to change the layout in Preferences but doesn't work. Could anyone help me please?

Hi there
after installing Mavericks on my macbookpro 2009 (Japanese keyboards) the layout doesn't work anymore. I mean, if I press the "@" button the "è" symbol comes out. I did already change the layout in the Preferences but it didn't work.
Could anyone help me please?

Apple has changed the way Kotoeri keyboard layouts work. You should be able to get normal behavior if you activate the US layout and switch to that just before using Kotoeri. Here is also an Apple note on the topic with another suggestion:
http://support.apple.com/kb/TS5284
Be sure to tell Apple you want this changed back to the way if was in 10.8 and earlier via
http://www.apple.com/feedback
If you know Japanese well, you might ask on the Japanese discussions whether someone has found a better fix for this:
https://discussionsjapan.apple.com

Nokia lumia 920 camera not working

I have tried resetting it in settings and restarting phone but my camera app doesn't work regardless how I try to utilize it, Facebook or directly from menu. The screen is just totally black.
help appreciated, will I have to take this back?

Hi cgaskin,
Welcome to the forum!
It might be that the problem is with the hardware of the phone already since reset didn't fix it. If your phone is still in the replacement period then you should contact your retailer to get a replacement. However, if your retailer can't help you, it is best to send it to Nokia Care Point.

My internet doesn't work while abroad in Italy

I'm abroad in Italy for the year and my wifi doesn't work or is very spotty. My host family has no problems with wifi and it works on my iPhone, and they even bought a new modem, but it still doesn't work. Any suggestions?

Make sure your date and time is correct on your iPod
And
Try reset network settings

Jar doesn't work while java work fine

I have a similar but not same case as "Please Help, jar file don't work" that is on 4/20. My program works fine by java class execution, but when I put them to jar it generates NullPointerException. The program get data from separate csv files. The error I get by executing jar is quite same as when I delete csv files and execute java. Only one jar file involves. csv files are in the same directory as class files.
- My manifest file is;
Manifest-Version: 1.0
Class-Path: .
Main-Class: MetricConverter
Created-By: 1.4.2_07 (Sun Microsystems Inc.)
I tried different Class-path possibility, but same result.
java.lang.NullPointerException
at MenueMaker.cahrtMaker(MetricConverter.java:71)
at MenueMaker.<init>(MetricConverter.java:53)
at MetricConverter.MetricConverter(MetricConverter.java:81)
at MetricConverter$1.run(MetricConverter.java:33)
at java.awt.event.InvocationEvent(EventQueue.java:178)
at java.awt.EventQueue.dispatchEvent(Unknown Source:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source:151)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source:145)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source:137)
at java.awt.EventDispatchThread.run(Unknown Source:100)
Classes used in the program are;
MetricConverter (Main) that has >$1
MenueMaker that has > $1,$2,$3,$4,$5
ReadCSV
When I delete csv files from the directory and execute java, the following line is added to 1st line of above Exception message.
at ReadCSV.readCSV(MertricConverter.java:272)
The following is chartMaker method;
public void chartMaker(){
String[][] gotChart=null;
chart=new String[4][][];
int index=0;
for(int i=0; i<4 ; i++){
URL pickURL=getClass().getResource("csv"+i+".csv");
ReadCSV file=new ReadCSV();
try{
gotChart=file.readCSV(pickURL,0);
}catch(IOException e){}
int a1=0;
int a2=0;
while(a1<gotChart.length){
while(a2<gotChart[a1].length){
a2++;
a1++;
index=i;
chart[index]=new String[a1][a2];
chart[index]=gotChart;
I have looked every place I can imagine for a day, but found no answer. Since it works fine with java it should be with jar archiving.
Any advice will be appreciated.
Thanks.

atmguy, thanks for sticking with this.
I spend a half day again studying this.
A new founding that is jar is getting csv files from outside of jar archive.
My command to make jar is "jar cvfm MetricConverter.jar mym *.class si.au source"
source folder has 4 csv files. and result is,
added manifest
adding: MenueMaker$1.class(in = 809) (out= 515)(deflated 36%)
adding: MenueMaker$2.class(in = 699) (out= 472)(deflated 32%)
adding: MenueMaker$3.class(in = 589) (out= 398)(deflated 32%)
adding: MenueMaker$4.class(in = 1714) (out= 950)(deflated 44%)
adding: MenueMaker$5.class(in = 667) (out= 436)(deflated 34%)
adding: MenueMaker.class(in = 5168) (out= 2824)(deflated 45%)
adding: MetricConverter$1.class(in = 349) (out= 247)(deflated 29%)
adding: MetricConverter.class(in = 1068) (out= 677)(deflated 36%)
adding: ReadCSV.class(in = 1459) (out= 913)(deflated 37%)
adding: s1.au(in = 55708) (out= 44941)(deflated 19%)
adding: source/(in = 0) (out= 0)(stored 0%)
adding: source/csv0.csv(in = 543) (out= 254)(deflated 53%)
adding: source/csv1.csv(in = 765) (out= 365)(deflated 52%)
adding: source/csv2.csv(in = 340) (out= 191)(deflated 43%)
adding: source/csv3.csv(in = 1004) (out= 497)(deflated 50%)
Double Clicking MetricConverter.jar with the source folder in the same directory open the program even copying them to other directories. However, from desk top or my document doesn't work (seems to me space in the directory name?). Without source folder console shows NullPointerException at ReadCSV.. The program cannot find csv files.
Another thing that is the program only works when manifest file has class-path : . and <cade> URL pickURL=getClass().getResource("./source/csv"+i+".csv");
has ./.
I tried making source.jar and putting index using "jar -i MetricConverter.jar" with "class-path: source.jar" in manifest, and use jnlp, but nothing works.
You seems to me an experienced java programer. If you don't mind look this at www.mixvision.net/java/MetricConverter.jnlp, also I leave www.mixvision.net/java accessible for now.
Thanks again.

Changing volume on my Lumia 920 doesn't work while...

Similar Messages

Maybe you are looking for