Changing VPN from WatchGuard to Juniper this weekend -- looking for potential gotchas...

This weekend we're replacing our WatchGuard firewall with a Juniper SRX firewall.
Our Azure VPN terminates on this WatchGuard. By the end of the night we hope to have it up and running off of the new Juniper SRX firewall.
We have a team of network consultants on hand who are all pretty savvy with Juniper configurations. But this team doesn’t have much knowledge on Azure VPN connections.
The Microsoft Azure site provides us with a script to use with Juniper firewalls, which is nice. And we're basing our initial work off the VPN device script.
Looking to get some ideas from some of you in the field for potential gotchas that may come about as a result of making this change.

Hi,
Watchguard is a supported VPN for Azure VPN connections. In addition, if your VPN device's IP address is changed, you need to change the VPN device's IP address on the Local network page.
In addition, Watchguard is only compatible for static routing gateway. Please check your exsiting gateway type and if it is a dynamic one, please delete it and create a static one instead:
Change a Virtual Network Gateway Routing Type
Then, you can follow the steps when you created the site-to-site VPN connections using Juniper SRX.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new compute

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.

YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.

I live in Hong Kong, but I am from Seattle WA. When i look for ibooks or itunes my selections are extremely limited. Is this because I'm in a different country?

I live in Hong Kong, but I am from Seattle WA. When i look for ibooks or itunes my selections are extremely limited. Is this because I'm in a different country?

For instance; it seems on the net I see that many Tom Clancy books are availbe on ibooks, but i can not just look them up on my phone. along with many other authors. in the Category section, when trying to browse, many of the categories do not contain any authors or titles at all. this goes for many "i" apps.

I'd like to use the categories from my outlook contacts, i'm looking for recommended applications

i'd like to use the categories from my outlook contacts, i'm looking for recommended applications?

There is a third party I tried it. Didn't work for me because they wanted me to sync my contacts on their cloud. It doesn't work with USB Sync. But if you want to try it here:
http://www.companionlink.com/products/outlook-categories.html
Best would be if Apple adds the feature and supports the categories!!!

Riddle Me This! Looking for Plug-In or Handy Hint

Good Day, Illustrator Forum Folk:
I'm looking for a freeware or shareware plug-in (or maybe just a handy hint that I'm unaware of) for ai CS5 that will show me the transform pane's coordinates of a PREVIOUSLY selected item.
In other words, I select an object or objects. I usually write down the co-ordinates on a scrap piece of paper. Then I select a different object or place or import a new object to these co-ordinates.
My best comparison is how in Photoshop in the Info Pane you can show 1st Color Readout and 2nd Color Readout. Just need some kind of tool that captures the position and size of an object so when I select another object I can still see those previous numbers instead of having to rely on scraps of paper and handwriting.
Does anyone know of such a tool?

Hi Russel, it took me a while to put something together, but finally here it is. If you only wanted to "see" the values of an object, then manually use those on another object, this might work for you. I'm still working on another version where values can be copied from one object to another, but i'm running into some trouble with it.
// script.name = copyPasteValues4.1;
// script description = 'shows' transform values of selected object;
// script.required = one selected object
// script.parent = CarlosCanto // 3/18/11;
// script.elegant = false;
//#target Illustrator
if (app.documents.length > 0)
        //alert("more than 0");
        var idoc = app.activeDocument;
        sel = idoc.selection;
        if (sel.length==1)
                //alert("selection = 2")
                var ipathTop = sel[0];
                var x = sel[0].position[0]+sel[0].width/2;
                var y = sel[0].position[1]-sel[0].height/2;
                var w = sel[0].width;
                var h = sel[0].height;
                var x2 = sel[0].position[0];
                var y2 = sel[0].position[1];
                var win = new Window("palette","Selection Values");
                var panelControls = win.add("panel");
                var grpControls = panelControls.add("group");
                var grpPosLbl = grpControls.add("group");
                var grpSizeLbl = grpControls.add("group");
                var lblx = grpPosLbl.add("statictext",undefined,"X: " + x); // x.toFixed (3)); // fixed to 3 decimal places
                var lbly = grpPosLbl.add("statictext",undefined,"Y: " + y); // y.toFixed (3));
                var lblw = grpSizeLbl.add("statictext",undefined,"W: " + w); // w.toFixed (3));
                var lblh = grpSizeLbl.add("statictext",undefined,"H: " + h); // h.toFixed (3));
                grpPosLbl.orientation = "column";
                grpSizeLbl.orientation = "column";
                grpPosLbl.alignChildren = "left";
                grpSizeLbl.alignChildren = "left";
                //add Radio buttons
                var grpRadio = win.add("group")
                var radCenter = grpRadio.add("radiobutton",undefined,"Center");
                var radTopleft = grpRadio.add("radiobutton",undefined,"Top/Left");
                radCenter.value = true;
                win.margins = 10;
                win.spacing = 10;
                panelControls.margins = 10;
                radCenter.onClick = function(){
                   // alert(idoc.name);
                    lblx.text = "X: " + x;
                    lbly.text = "Y: " + y;
               radTopleft.onClick = function(){
                   //alert(idoc.name);
                    lblx.text = "X: " + x2;
                    lbly.text = "Y: " + y2;
                win.center();
                win.show();
         else
                alert("select 1 artItem only before running");
else
        alert ("there's no open documents");

I have an 2.4 Mac Book Pro. I want to wipe it clean and reinstall the Lion OS I bought from the App Store. I looked for instructions but did not find them any advice where the instructions are would be appreciated. Thanks

I am looking for help on how to or where I can find information on how I can clean my hard drive and then reinstall Lion, Thanks

Boot from Recovery HD upon startup hold-down keys Command R . Until you see the Apple logo then select language:English.click the Arrow (Next)
From the OS Utility, select Disk Utility then click Macintosh HD. click the Erase tab on the right side.
Format:Mac OS Extended(Journaled)
Name:Macintosh HD
And click Erase
Once Erase process is done, close Disk Utility and select the second option in the OS Utility which is Reinstall OS. Let it run. It should take about an hour to complete, this type os installation is internet dependent so somehow the completion of the process depends on internet speed as well.

New at this and looking for advice

Hi, I am new at Qmasnter and looking for advice. Myself and a few of my other co-workers have been using FCP2 and we have been tossing around the idea of making a Cluster with our computers on our campus. Two of us run on MacBook Pro's, and the other on a 24" iMac, there is also 2 MacPro's and another 24" iMac we would like to toss into the cluster. I know it seems backwards, the ones that are doing all the editing are on the slower machines, but our organization operates backwards and not logically anyways. The question is what happen to the cluster when a node is turned off? Should the laptops be a node in the cluster? All the computers are running on a gigabyte network, so the network can handle it. Just looking for peoples wisdom before I cause my own headache, and learn for others mistakes.
Thanks
Randy Kennedy

Hi Jon,
I've also started investigating the qmaster.
I'm following this guide you posted on digitalrebellion :
http://www.digitalrebellion.com/blog/posts/usingcompressor_with_multiplecores.html
but I the 'options for selected service' is greyed out when I click on compressor.
I can selected the 'options for...' when I click on rendering, but it just allows me to add another computer (but my only choice is 'this computer'. I see the option for SSH, but if i'm logged into another computer, shouldn't I be able to see it in the list?
Sorry for the noob questions. I"m trying to figure it out.
I have the following at my disposal:
mac pro 2.66 (main machine)
imac 2.16
macbook pro 2.2
powermac g5 2.0
cheers,
Keebler

Had to restart information store service. Caused by throttling?? Event ID 1010 from ManagedAvailability, any where else to look for error logs?

For some reason we had to restart the information store service. So far I came up with these logs from the
ManagedAvailability event logs. If there some where else to check for additional information? It looks like the throttling allowed a failover?!
DatabaseFailover-00cb58bd-0115-4478-b4aa-fe60dce2757a-DatabasePercentRPCRequestsDatabaseFailover: Throttling allowed the operation to execute
Starting recovery action (Action=DatabaseFailover, Resource=00cb58bd-0115-4478-b4aa-fe60dce2757a, Requester=DatabasePercentRPCRequestsDatabaseFailover, ThrottlingMode=None)
Recovery action failed. (Action=DatabaseFailover, Resource=00cb58bd-0115-4478-b4aa-fe60dce2757a, Requester=DatabasePercentRPCRequestsDatabaseFailover, Error=Microsoft.Exchange.Cluster.Replay.AmDbMoveOperationNotSupportedStandaloneException: An Active Manager
operation failed. Error: The database action failed. Error: This operation is not supported on standalone mailbox servers.
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MoveDatabase(Guid mdbGuid, MountFlags mountFlags, UnmountFlags dismountFlags, DatabaseMountDialOverride mountDialOverride, AmServerName fromServer, AmServerName targetServer,
Boolean tryOtherHealthyServers, AmBcsSkipFlags skipValidationChecks, AmDbActionCode actionCode, String moveComment, AmDatabaseMoveResult& databaseMoveResult)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClassc.<MoveDatabaseEx>b__b()
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String databaseName, RpcServerOperation rpcOperation)
   --- End of stack trace on server (XMNWDEX001.Xamin.com) ---
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String serverName, RpcErrorExceptionInfo errorInfo)
   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, IADDatabase database, String targetServer, InternalRpcOperation rpcOperation)
   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MoveDatabaseEx(IADDatabase database, Int32 flags, Int32 dismountFlags, Int32 mountDialOverride, String fromServer, String targetServer, Boolean tryOtherHealthyServers, Int32
skipValidationChecks, AmDbActionCode actionCode, String moveComment, String& lastServerContacted, AmDatabaseMoveResult& moveResult)
   at Microsoft.Exchange.HA.ManagedAvailability.ManagedAvailabilityHelper.PerformDatabaseFailover(String componentName, String comment, Database database)
   at Microsoft.Exchange.Monitoring.ActiveMonitoring.Responders.DatabaseFailoverResponder.InitiateDatabaseFailover(String databaseGuidString)
   at Microsoft.Exchange.Monitoring.ActiveMonitoring.Common.ThrottledRecoveryAction.Execute(Boolean throwOnException, TimeSpan timeout, Action`1 action)
   at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.InvokeResponder(CancellationToken cancellationToken)
   at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.CheckCorrelationAndInvokeResponder(MonitorResult lastMonitorResult, CancellationToken cancellationToken)
   at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.<>c__DisplayClassb.<>c__DisplayClassf.<DoManagedAvailabilityWork>b__9(ResponderResult lastResponderResult)

Hi,
Based on this event log, I find the error “Error=Microsoft.Exchange.Cluster.Replay.AmDbMoveOperationNotSupportedStandaloneException” and error “Error: This operation is not supported on standalone mailbox servers.”
This error seems that there is unsupported configuration in your Exchange deployment.
I will be very glad to help if you explain your Exchange server deployment for more details.
Thanks.

Changing VPN port

Since there are several VPN solutions at my office firewall I need to be able to change the port used by L2TP when connection using VPN.(e.g. set it to port 1000 and NAT it to 1701 in the firewall). I'm using the build in VPN client. However I can't find anywhere to change VPN port. Isn't this possible?
Message was edited by: jornki

I'm not sure about doing this with the VPN...
But you could tunnel from one machine to another (similar to a VPN) using SSH. You can set SSH to answer on any port. So maybe this would work for you.
This article describes exactly what may work for you:
http://www.afp548.com/article.php?story=20040815101734513&query=ssh
Jeff

Changing homedirectories from AFP to NFS cures all Office Problems?

Hi all,
well a lot of us do have a lot of problmes using Microsoft Office. New files can't be copied to the server (with unknown error -50), saving files fail because of wired netwrok errors or full disks, duplicating files cause complete file loss (the copy and the oridignal file itself), wordfiles seem to be locked (should i make a copy?) trying to open them, over and over there are Word Work Files and uncountable nummers auf Autorecovery files with zero bytes, Word bothering you to many files are open (with not a single file opend) ...
Well this all seems to be a problem of office combined with homedirectory shared through AFP. A Friend of mine told me, that he has no problems with office. The only difference betwenn his infrastructure and mine is, that he uses NFS for sharing homedirectories.
So i did the Following:
I created a new sharepoint for homedirectories and shared it through NFS. Created a new user, using this sharepoint for his homedirectory. Then i worked with the NFS-User on an AFP-sharepoint (like creating a Word file, doing changes and saving it). Then i worked on the same document with an user thats homedirectory is shared through AFP. Everytime i did a change to the document and saved it, a new Word Work File was created next to the original file. After several iterations with the AFP-user there error that the document is allready opend came up...
So my first findings comparing NFS users with AFP users is, that the problems using Office are completely gone when using NFS for homedirectories.
Now the questions for me are:
1.) is anybody there that can approve my findings?
2.) are there any reasons not to use NFS for homedirectories?
3.) which protocol do you use for sharing homedirectories?
4.) what would be the smartest way to change / move APF shared homedirecties to NFS?
I allready did the following to change an AFP shared homedirectory to NFS:
- Set the users home dir from /Users/ to none (in Workgroup Manager)
- as root via terminal mv /Users/myuser /NFSUsers/
- in Workgroupmanager set the useres homedir from none to /NFSUsers/
This worked well (for a short look on it). The only problem was, that the subfolders in the sidebar of the Finder window did not work, and had to be reseted.
Any other suggestions?
Greetings
MacSEK

Hello,
Today a friend reported this problem to me. This problem was only to Word, to Excel no.
In my case the guilty was the add-in PDFCOMPLETE in WORD 2013.
I saw it in programs list on Control Panel. It belong to PDF Complete, Inc.
They have a HP computer. When I uninstalled this add-in from programs list the problem solved !
I did that today. Now they are able to change language and also to put tone on Greek vowels.
When I uninstalled the PDFCOMPLETE I saw on uninstallation window the HP icon !
It seems a file related with HP programs created the problem.

Looking for resource: accessing session info from JPS portlets

Hi! The Portal Developer's Guide 10g Release 10.1.4, section 7.2.5 shows how to access session information from PDK portlets. I'm looking for information (tutorials, books) on how to do this from JPS portlets in the Oracle Portal environment.
Thx!

If u are using JSPProvider, then for getting the Session variable, peruse the below points:
JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
Session ses=p.getSession();

Looking for mileage logger app that gets its addresses from contacts

I'm looking for mileage logger that gets addresses from the iPhone's contacts. I used to have the perfect app, called Tap2Go but it no longer works and isn't supported. I don't need a bunch of other bells & whistles. I just want a logger that will give me the option to look up the address in my contact book. I hate to have to leave the app, open Contacts, find the contact, select & copy the address & go back to the app and paste in the address. Also, need the app to calculate the distance based on the addresses entered.
Somebody must make an app that does this but I downloaded a bunch of loggers & trackers and none offered this feature.

Finally found what I was looking for after wasting $$$ on apps that promised features that they didn’t deliver.
MileTracker from Silverware does everything I was looking for http://www.silverwaresoftware.com/Home.html
I can’t believe how hard it was to find an app that would do what I needed but the folks at Silverware seem to have carefully thought through what is needed and they give you lots of options and fields that can be toggled on and off. It cost 2.99 and then another .99 to turn on the GPS based calculation.
Well worth it.

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfull restarted my sy

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg Williams

Boilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

I upgraded our CAM/CAS servers from 4.8.2 to 4.9.0 this weekend

I upgrade the servers from 4.8.2 to 4.9.0 this weekend and all of the servers now crash when introduced to user traffic. The upgrade shows no errors and I have not had a problem in the past the servers are 3355s. Has anyone else upgraded to 4.9.0?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Changing VPN from WatchGuard to Juniper this weekend -- looking for potential gotchas...

Similar Messages

Maybe you are looking for