Changing VPN port

Since there are several VPN solutions at my office firewall I need to be able to change the port used by L2TP when connection using VPN.(e.g. set it to port 1000 and NAT it to 1701 in the firewall). I'm using the build in VPN client. However I can't find anywhere to change VPN port. Isn't this possible?
Message was edited by: jornki

I'm not sure about doing this with the VPN...
But you could tunnel from one machine to another (similar to a VPN) using SSH. You can set SSH to answer on any port. So maybe this would work for you.
This article describes exactly what may work for you:
http://www.afp548.com/article.php?story=20040815101734513&query=ssh
Jeff

Similar Messages

WRVS4400N change VPN port

Hi,
I have a WRVS4400N VPV router and want to connect to it remotely via VPN.
The problem is that my internet-provider block almost all ports below 1000.
Can I change the port-number of VPN? If so, how?
I have a cable router that I configured so that WRVS4400N is DMZ. So all ports ar forwarded.
Thanks,
Marc

Hmm can't really find out how to set up an ssh server on my system, it's by the way an XP Pro system. I'll have to fight some more with openssh for windows to get it running. Hopefully I'll get a MacMini soon to set up as server for this kind of stuff.
But for now I actually want to get the vpn started over another port. Isn't there any way? searched the web for many hours but can't find a good working tool or setting.

Change VPN port with Maverick server 3.2.2 ??

Hi,
on a new installed server I want to have access via VPN. Serversoftware is set up, VPN is running but connection is refused from outside.
Did a port check and found out that only port 1723 is routed to the server on the Fritzbox router.
Okay, now we also routed the 500 UDP and tried to switch the 1701, but as this is already occupied by some other hardware on the network (Synology NAS via upnp) we have only the port 1702 to choose - but I don´t know how to tell the server software to provide the connection via this port :-/ ...
By the way : the firewall on the mac is switched on (OS X 10.9.5) - tried to find some settings for the ports to change there but didm`t succeed.
If all of this info sound confusing I beg your pardon - I`m not too deep in this, just semi-professional ;-)
Any help in this matter appreciated !!!
Kind regards
Roland

For me, it looks like the same.
1 - Yes
2 - B
3 - Not yet, I've tried to downgrade to 3.2.4, but it is not possible.
4.1 - service xend status:
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in ?
    from xen.xend.server import SrvDaemon
File "/usr/lib64/python2.4/site-packages/xen/xend/server/SrvDaemon.py", line 26, in ?
    import relocate
File "/usr/lib64/python2.4/site-packages/xen/xend/server/relocate.py", line 28, in ?
    from xen.xend import XendDomain
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py", line 36, in ?
    from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
File "/usr/lib64/python2.4/site-packages/xen/xend/XendCheckpoint.py", line 20, in ?
    from xen.xend import balloon, sxp, image
File "/usr/lib64/python2.4/site-packages/xen/xend/image.py", line 46, in ?
    xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, 'Internal error', 'xc_interface_open failed: No such file or directory')
xend daemon is stopped
4.2 - service ovs-agent status:
log server (pid 4460) is running...
notification server (pid 4489) is running...
remaster server (pid 4492) is running...
monitor server (pid 4494) is running...
ha server (pid 4496) is running...
stats server (pid 4498) is running...
xmlrpc server (pid 4499) is running...

How to change default port in iws 4.1 installed in Solaris 5.9

Hi All,
I had installed iws 4.1 in solaris 5.9
Now , I want to change my default https port from 443 to 445 .
Can anybody , Please let me know the proceudre how to do it ?
Thanks for help in advance.
Regards
James

Ya , Manish you are right IWS 4.1 is really old.
But My application has been developed in past that is using IWS4.1 .
Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
And the pointer for changing the port from magnus.conf is also correct but
I need to make it default port.
That means If would not specify any port number out of two port request goes to default one.
Right now default port is 443
But I want it to be 445
Thanks
James
Message was edited by:
write2jamesbond

How to change the port no in weblogic 10.3 server.

Hi,
Could you please tell me the steps,how to change my bea10.3 port no from 7001 to 7002?
Thanks Advance.

Hi,
Please refer to : http://weblogic-wonders.com/weblogic/2010/02/25/changing-adminserver-port-using-jmx/ (Using JMX)
http://forums.oracle.com/forums/thread.jspa?threadID=1037611&tstart=0 (Using WLST)
Simplest option ...your can change it from AdminConsole as well.....
Login to AdminConsole--->Server--><YourServer_name>--->Cionfiguration(Tab)--->ListenPort (Change it)
Thanks
Jay SenSharma

My ISP tells me I need to I need to change the port to send/receive e-mails, but I can't remember my Mail password to add an account. How can I proceed without the password?

My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.

your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.

My provider changed to pop3 port 995 incoming and port 465 outgoing. Now it no longer works. I went into the Thunderbird 28 beta and changed the ports

I have Thunderbird 28 beta. After changing the ports, I no longer receive mail and this is the error message going out:
Sending of message failed.
The message could not be sent because the connection to SMTP server mail.3dcartstores.com timed out. Try again or contact your network administrator.
Passwords have not been changed and I have to login on the web

What are the exact instructions from your email provider?
Please post your Troubleshooting Information.
AppMenu button - Help - Troubleshooting Information

Can't change printer port on Windows 8.1 and Server 2012 R2

1. Install "Lexmark X646e Class Driver" using a in-box print driver (i.e. one comes with the Windows installation base) .
2. Go to "Printer properties" -> "Port"
3. Select a custom monitor port, and the following error occurs in Event Viewer.
An error occurred while configuring print queue 'Lexmark X646e Class Driver'. Printer driver 'Lexmark X646e Class Driver' may not be used in conjunction with a non-inbox port monitor.
Same steps applied on Windows 8 and Server 2012, and not issues found. The restriction/limitation is newly added in Window 8.1 and Server 2012 R2.
Changing to a custom monitor port after printer driver installation is very important for us.
How can we solve or workaround the above issue, so it can behave like Windows 8 and Server 2012?

What Port Monitor just so I can bubble this information to some others?
Alan Morris Windows Printing Team
Hi Alan:
We developed a custom printing system, which involved the following configurations:
1. Create a custom port monitor on server 2012 r2.
2. Change an existing print queue to use this custom port monitor, and share this print queue.
3. All workstations will print to this shared print queue on the server.
The goal is to manage/monitor the print information in StartDocPort for all printing for instance. This is what we've been doing for a long time.
Now we upgraded our system from server 2012 to server 2012 R2, but we can't change the port monitor to our ones anymore.
I've tried the Type3 printer driver, such as Brother Color Type3 Class Driver, unfortunately it didn't work if the installation is using "Add a printer", and select the driver from the list.
The only way to make it work is to install the printer driver using the one downloaded from the vendor's website, this will bypass Windows "Add a printer".
Is there any chance we can make this to behave like server 2012 or earlier? Modify registry keys?
Cheers
Steven

How do I change a port in Mac OS X Mountain lion

Apparently Logmein makes use of port 2002 in mac OS X Mountain Lion. I need to use that for some new accounting software. How do I change the part in Mountain Lion and how would I do an install of Logmein on the computer to use another port or how, with Logmein currently installed do I change from port 2002 to some other port. The major question is how do you change port assignments in OS x Mountain Lion?
Thanks for you help.
Tom in Dallas

There isn't a generic way to do what you want. Not on Microsoft Windows. Not on OS X.
The ICANN registry of port numbers exists so that these messes don't happen, or don't happen very often. So that there are no port conflicts among various applications, and there are ways to request ephemeral (temporary) ports, and (for some applications) to find out which port(s) the application happens to have allocated and is using. In this case, it appears that folks at LogMeIn and with the accounting software didn't avail themselves of the ICANN port database. They're using the preferences mechanism as a work-around for that.
Have a look at ipfw and pfctl tools here (see man ipfw and man pfctl at the Terminal.app prompt), and see if you can figure out how you're going to map just one local application that's opening 2002 to some other port, without disturbing the other application that's mapping to that same port (and colliding). This is the remapping mechanism and akin to what can happen at some firewalls, and not the requested control over the selected port. It's not set up to remap local application conflicts.
The selected port is either a configuration option within the specific tool, or it's hard-coded within the tool. There's no generic registry of applications and ports. That's what the ICANN port registry is for.
The worst-bad-ugly approach is to dump out the executable code, reverse engineer it, and patch the preferred port right into the code; to change the code without using the original source code. Or some tool-specific configuration file or preferences setting, as and if available.

How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
Mac os x 10.9.2. ; Garageband 10.0.2

There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

How to change the port in the URL of a BSP Iview

Hello,
we have several appraisal templates released in our R/3 system and we can access them by the portal.
We are changing our systems and we are implementing a load balanced in order to improve the connections with the portal. So we need to know how can we change the port of the server that appears in the URL when we go to MSS ->teamviewer and select one appraisal to see the information of the template.
We need to change it and indicate the port of the load balanced http://emsapl404pre.endesa.es:8000/sap/bc/bsp/sap/hap_document...) not the port of one of the WAS server as we have now http://emsapl404pre.endesa.es:8302/sap/bc/bsp/sap/hap_document...)
Thanks in advanced.
Best regards.
Seshen

Hi,
Just view any BSP Application in SE80 and the click on Utilities(M)->Settings.
This will fgive you option to change URL and port number of the URL..
It will be under the Business server Pages tab in the settings window.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Can't change the port

A while ago, while in a library and trying to iChat/text with my wife and getting errors I attempted changing the port to 443 to solve the issue. It helped and I was able to chat.
Now I'm having problems Vchatting and thought I'd change the port back to 5190. But I can't. When I open preferences and go to server settings and click on the port settings it's like clicking on a frozen window, nothing happens.
I realize changing the ports may or may not solve my problem, but why on earth can I no longer change the port settings?
Thanks

Hi Daniel,
You first have to log out of your AIM account.
(you can log out by selecting iChat's pull down menu and select "log out of AIM)
Then you will be able to change the port.
JP

Can't change my Port under preferences

For some reason.
I have chosen my server for outgoing mail, but when I go to advanced to type in the appropriate Port #, the number that is there is shaded and I can't type there. I click the SSL checkbox on and off and the port number changes but incorrectly both times.
Is there a way I can control what port I wanna send my mail through?
Thanks

You do not have to set up your mail again.
If you scroll down far enough in the screenshots it tells how to access
the smtp server settings.
NOT on the advanced tab, but under the 'account information' tab.
On the Outgoing Mail Server (SMTP) pop-up menu (close to bottom )select Edit Server List.
Result: The SMTP Server Options window opens. This window should let you change
the port smtp uses.
You are not trying to change the smtp port in the correct location if you are seeing the port number 143 was my point.

Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

Changing VPN port

Similar Messages

Maybe you are looking for