Changing web server refresh to less than one second

I just set up another PC on our network to display our engine test VI. Is there any way to increase the refresh rate to less than one second. I tried entering .5 sec on the config screen, but it changed back to one second. I'm using LabVIEW 8.5.1.
Thanks,
Todd Munsell
Wood Group Pratt & Whitney Industrial Turbine Services
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NY

Thanks again. I'll try that.
BTW, I just spoke with out rep from Daytronic Corp. who was testing the comm cards with his System 10 and PC. They worked fine for him. The only difference is that he is using LabVIEW 7.0 and we are using 8.5.1. They don't have any subVIs written for the newer LV versions. That may be the cause the the issue we're having with using the comm cards to access the DAQ. They do not have the time or money to update their subVIs for the newer LV versions, but I'd have to think that there is a way to change them myself to make them work. Ideally, I want to use a modified version of the app I'm using on another PC without having to bother with the network to pass the data. I already have a cable made to connect the other PC to the System 10.
I almost forgot something.... I found a version 8 System 10 subVI package using the NI search, but it didn't work either.
Do you know what might have changed in the newer LV versions that could cause this issue? I've attached a zip file of their subVIs. Like I mentioned earlier, LV works fine using the main (built-in) comm port on the System 10 DAQ. It's just the additional cards that do not work correctly. They seem to establish the comm link OK, but the binary data that the System 10 sends is not interpreted and displayed correctly. It's usually all gibberish on the screen.
Of the Daytronic subVIs, the subVI that I use to test with is the "example.vi", which is used for binary data.
The "simple terminal" subVI works fine, but I can't use it to test the data link since it's configured differently.
When I use the main System 10 comm port, the simple terminal doens't work and the example.vi does. Why wouldn't it work with the other ports/cards?
Could you please check these out when you have the time and see if you can find something that isn't configured correctly? I may be overlooking something obvious, since I'm still learning LV.
Thanks
Message Edited by tmunsell on 07-28-2008 09:18 PM
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NY
Attachments:
labvdr7.zip ‏891 KB

Similar Messages

Only records of less than one day allowed for attendance/absence type 1002

Hi All,
I am getting an error while maintaining my sick leave absence type
"Only records of less than one day allowed for attendance/absence type 1002"
how to resolve this
SD

Bcz recently i made a change like this
For our sick leave
"First 14 days(1- 2 weeks) Full Salary
Next 14 days (3- 4 weeks) 75% Salary
Next 14 days (5- 6 weeks) 50% salary
Next 28 days (7- 10 Weeks) 25 % Salary
More than 10 Weeks no Salary"
so what i did is
I mantain one Sick leave type and counting rule as -
seq no 1 for "First 14 days(1- 2 weeks) Full Salary
seq no 2 for Next 14 days (3- 4 weeks) 75% Salary
like this for all the conditions
and in deduction rule I maintained deifferent Absence quotas
Plz suggest me this solution will work out
SD

Refresh uwl less than a minute

Hi experts,
It is possible to refresh the uwl in less than a minute?
He have an EP 7 SP18 and ECC 6 EHP3. We use the uwl to execute certain task of a business workflow in the backend.
We configure the Delta Pull Mechanism in the backend, create two jobs, one execute once a day and other every minute but the refresh os the uwl is always greater than 1 minute.
In the portal side, in the webflow connector we have 15 seconds for the delta pull channel and blank for the other parameter.
Is it possible to configure the Portal or the Backend so the uwl refresh in less than a minute?
Thanks in advance,
Manuel

Have you tried Delta Pull. Configure the parameter Delta Pull Channel Refresh Period (in Seconds)
Check [http://help.sap.com/saphelp_nw2004s/helpdata/EN/eb/101fa0a53244deb955f6f91929e400/content.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/eb/101fa0a53244deb955f6f91929e400/content.htm]
Regards,
Prasanna Krishnamurthy
Edited by: Prasanna Krishnamurthy on Jan 11, 2010 12:55 PM

My iMac is less than one year old. Without warning, the screen suddenly goes black. It used to happen occasionally, but is now happening all the time without warning. What is Apple doing to correct the problem?

My iMac is less than one year old. Without warning, the screen suddenly goes black. It used to happen ocasionally, but now it happens all the time. Numerous people have posted about this issue. Why hasn't Apple solved the issue. For what I paid my computer, I expected more from the product than I have gotten. I was a PC person for years and most of my associates told me that I needed to get a mac...I am starting to regret having taken their advice.

Sorry you're having this problem.
A few years ago we had a similar issue on one of our machines, it was an early MacBook. Ended up being a cracked circuit connection on the motherboard. Changes in temperature caused the crack to expand and contract resulting in a shut-down followed by an automatic reboot. Sometimes over-and-over. I understood from AppleCare at the time that those symptoms could have also been any number of things including a intermittent issue with a powersupply.
If you take it back to the Apple Store at some point, I would ask them to have it run some CPU intensive tasks that closely resemble what you are doing when the screen goes black. It took us several try's to find the problem. Calling AppleCare each time to discuss it and troubleshoot before making the trips to the Apple Store really moved things along. In fact, it wasn't until the Apple Store had cracked the case from the inside that things kicked into a higher gear and AppleCare phone support sent out a pre-paid FedX package to send it to a refurbishing facility. Never a problem since and I know the people who have the machine today.
PS Can identify with the trip to the Apple Store, our closest one is in Knoxville, 2hrs from us.

How can I move clips in my project more accurately? i.e. Less than one frame over left or right?

Hi there
I'm trying to sync some video to some audio. I have snapping turned off, yet I cant move a frame left or right any less than one frame.
Is it not possible to move a frame anyless than one frame left or right? It still SNAPS to one frame left or one frame right.

As Jon has told you, you CAN NOT adjust video in less than a 1 frame increment. And I honestly doubt that even if you could, that you'd see the difference in the audio synch. In the good old days of film editing, it was only possible to adjust the audio synch for 35mm within a 1/4 of a frame (as each frame has 4 perforations) and 16mm within a frame (as each frame has 1 perf).
The only way to avoid this problem (if it is a problem) is to genlock the cameras so the timing of each frame matches from camera to camera.

Time Machine Migration hanging on "Less than one minute remaining"

I decided to take a risk with my iMac and do an erase and install with Leopard, the version of OS X it's been running for years now. The reinstall went fine migration assistent got me started transferring my information from my Time Machine external USB 2.0 hard drive. It said it was just over 200 GB of information. That proceeded fine until it reached the "Less than one minute remaining" mark. It's been sitting here for over 12 hours in the "transferring files to support applications" process. What should I do? Is it alright for me to manually turn off the computer and re-boot? There is no cancel button or anything. I do get the pleasant clunking sound when I hit enter.

Welcome to Apple Support Communities
If you have connected both computers with a cable, disconnect and connect that cable again, so migration should continue. If it doesn't work, restart your MacBook Pro and check that all the files have been transferred. If not, open Migration Assistant and transfer your files

Just tried installing an update to OS. Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.

Just tried installing an update to OSX Snow Leopard. Prior to trying to update OS, I was running V 10.6.3. During installation, it locked up. Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound. What do I do now? Help!

Hold the power key till it shuts down, it may take a little while, try holding it thru the warning.
Then if it shuts down restart and open Safari/Preferences, General tab, and set "Save Downloaded Files to:"
Select desktop, if desktop is not available in the the drop down menu, click other, then select Desktop from the column from the on the left.
Then download this:
http://support.apple.com/kb/DL1399
This will download the "stand alone installer"
Click on the installer pkg and follow the prompts.
Hope this helps

Creating Custom Page Size less than one inch

I currently have Acrobat 6 on Windows XP, and it appears that I cannot set a custom page size less than one inch (Using Printer Preferences). Is there another method I can use to create a PDF from Publisher that has a page size less than one inch? If not, would updating to Acrobat 9 allow me to print to a custom page size of less than one inch?

Thanks Peggy,
I tried deleting the preference file and restarting Pages but I still have the same problem with the custom page size. When I start Pages I am presented with a bunch of templates so I choose Blank then I go through my procedure to select the custom page size that I created and always end up back at an A4 document.
I have used the demo version of Stone Create to do what I needed to do with the small page size (ie. create a small ad) but it is a pain that I paid for Pages and now will need to buy something like Stone Create to do what I need. Although, that said, having used Stone Create for this little ad I must say that for the price it seems like a pretty decent program that will do a whole lot of the desktop publishing type of functions without the rather steep prices of the Adobe products. I kind of wish I had bought this program instead of Pages now.
Cheers,
Graham

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

Less than one day

Hi all,
I want date like posting date should be system date -1.
I am doifn like this.
select-options : s_budat for rbkp-budat.
loop at s_budat.
s_budat-sign = 'I'.
s_budat-option = 'Eq'.
s_budat-low = w_date - 1.
append s_budat.
endloop.
from above result I am not getting the less than one day of sys date.
But every time I want less than oneday of sys date.
I need to work with Range table only not parameters.
thanks for your help.
Ajay reddy

Hi Ajay,
Not sure of understanding...but take a look :
loop at s_budat.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
s_budat-low = sy-datum - 1.
s_budat-high =sy-datum .
append s_budat.
endloop.
Hope this helps,
Erwan

1 million row full table scan in less than one minute?

All,
a customer has a table which is around 1 million rows.
The table size is 300 Mo.
The customer wants to calculate regular arithmetic operations,
and synthetic data on the whole table. He will use 'group by'
statements and 'sort by'.
He wants to know if it would be possible to get the results in
less than one minute, and what would be the necessary
architecture in order to achieve this?
He currently has a 4 Gb Ram machine, 4 processors (I think...).
It's a 7.3 database.
Would an upgrade to 8i or 9i help? Would partitioning help?
Would parallel query help? What else?
There will be no other concurrent requests on the system.
Thanks!

Hi
If you have four processors parallel query will increase speed
of executing your statement. It will work better with
partitions. In version 7.3 is not very easy to manage partitons
because you have not partition tables - you have only partition
views. Maybe the speed is the same but management of partition
views is not so easy. So in version 8i and 9i it will be better.
If you have index for group by columns and they are 'NOT NULL'
it will be additional way of increasing speed beacause you will
eleminate sort operation.
Regards

Installing Solaris 8, 9, 10 on less than one year hardware

Hello.
I have Solaris 11 installed, but for experience on older Solaris 8, 9 and 10, any advice on how to install them on my less than one year x86 hardware ?
Any clues or pointers.

Well, you can always install VirtualBox and then install Solaris 10 (update 8 or later) in a Virtual Machine..
.7/M.

How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS. It can be found in the ColdFusion program group off of the Start menu. Be sure to run it "As Administrator".
-Carl V.

Shift audio by less than one frame?

Greetings!
Newbie to FCP. I have Standard DV tapes of concerts, very long clips (from 20 minutes to more than one hour), and I want to replace the audio with wonderful 24/96 carefully recorded audio done in Logic Pro. I have been able to sync the audio to video in FCP, but only to within one frame (when I drag the audio, it moves at one-frame jumps). I can sync much more closely in Logic, but how do I get the video with new sync'ed audio back into the FCP timeline? And would this degrade the video as I go round-trip from FCP to Logic?
Is there any way I can move audio tracks in FCP by less than one frame?
If not, can anyone suggest the best workflow to accomplish this?
Thanks to all in advance!

This should help:
http://proappstuff.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89605 611A/BE5CA6A0-2D41-4F89-955C-16A05AC2A383.html
But to answer your question... no.
Good luck,
CaptM

Is there a way to slide a clip less than one frame?

Hi, When syncing audio to video, or lining up two different sources of the same audio, I sometimes find that I want to slide a clip less than one frame in the timeline. Is there a way to do this?
Thanks, Bob

You can slip the audio in sub-frame increments, but you cannot slip video as the frame is the basic unit.
To slip the audio in increments less than a frame, see:
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=43%2 6section=7%26tasks=true
MtD

Changing web server refresh to less than one second

Similar Messages

Maybe you are looking for