Changing web-services.xml for handler

I have been using the servicegen task to generate the .ear file for my webservice.
Among other things, it took care of generating the web-services.xml file for me.
I have a need to write a handler and thus it requires changes in the web-services.xml.
I generated the web-services.xml file the first time and made the handler related
changes and it's working fine.
But now, I loose the auto-generation facility (since I have hand-edited it for
handler changes). Any time, I change the interface of the webservice, I would
have to manually change the web-services.xml file to reflect the new interface.
Is there a better way of doing this so that I can auto-generate the webservices.xml
file plus make my handler changes. Anything in the ant to do it smartly, rather
than doing it manually. I would imagine that anyone who writes a handler would
run into similar situation.
thanks for help.
John

Here is an example of ejb and source2wsdd.
"manoj cheenath" <[email protected]> wrote in message
news:[email protected]...
It works with EJBs too. You should use ejbLink attribute
to point to the ejb link. Something like:
<source2wsdd
javaSource="${sourcecode.for.the.ejb.interface}"
ddFile="${webss.output.dir}/WEB-INF/web-services.xml"
typesInfo="${webss.output.dir}/WEB-INF/classes/types.xml"
serviceURI="${webss.service.url}"
ejbLink="${webss.ejb.link}" >
"John" <[email protected]> wrote in message
news:[email protected]...
Thanks for the response. But the source2wsdd task only works with javacomponents
whereas we have ejbs. Any other clues/suggestions.
Thks,
- John.
"manoj cheenath" <[email protected]> wrote:
Here you go.
regards,
-manoj
"John" <[email protected]> wrote in message
news:[email protected]...
Thanks for the response. I'll appreciate if you could share the
workaround
in 7.0.
I'm okay with it even if it's unofficial and might go away.
thks,
- John.
"manoj cheenath" <[email protected]> wrote:
Hi John,
This is a know problem with WLS 7.0 and WLS 8.1. The
DD file (web-services.xml) is much more expressive than
the servicegen ant task. So one needs to modify the DD
to use some features. But, if one modifies the DD then it
is difficult to use the ant tasks again for iterative developemnt.
JSR 181 [1] and JSR 175 [2] tries to address this
problem by providing metadata (markup) in source code.
Unfortunately these JSRs are in the early stages and
will be completed around JDK 1.5 timeframe. There
is an internal implementation of a similar beast in WLS
since 7.0 SP2, but it is not officially supported or
documented. Mainly because the above said JSRs are
supposed to address iterative development problem
in a standard way.
So, if you cannot wait for the JSRs and dont mind using
a non standard implementation that may not be supported
or may change in the next major release (~WLS 9.0),
let me know. I can send you details.
Regards,
-manoj
[1] http://www.jcp.org/en/jsr/detail?id=181
[2] http://www.jcp.org/en/jsr/detail?id=175
"John" <[email protected]> wrote in message
news:[email protected]...
I have been using the servicegen task to generate the .ear file
for
my
webservice.
Among other things, it took care of generating the
web-services.xml
file
for me.
I have a need to write a handler and thus it requires changes in
the
web-services.xml.
I generated the web-services.xml file the first time and made the
handler
related
changes and it's working fine.
But now, I loose the auto-generation facility (since I have
hand-edited
it
for
handler changes). Any time, I change the interface of the
webservice,
I
would
have to manually change the web-services.xml file to reflect the
new
interface.
Is there a better way of doing this so that I can auto-generate
the
webservices.xml
file plus make my handler changes. Anything in the ant to do it
smartly,
rather
than doing it manually. I would imagine that anyone who writes a
handler
would
run into similar situation.
thanks for help.
John
begin 666 handler.zip
M4$L#!!0`" `(`#V&D2X````````````````)``0`345402U)3D8O_LH```,`
M4$L'" `````"`````````%!+`P04``@`" `]AI$N````````````````% ``
M`$U%5$$M24Y&+TU!3DE&15-4+DU&\TW,RTQ++2[1#4LM*L[,S[-2,-0SX.5R
M+DI-+$E-T76J! D8ZQG&&Y@I: 27YBGX9B87Y1=7%I>DYA8K>.8EZVGR<O%R
M`0!02P<(<UT-_$<```!'````4$L#!!0`" `(`/V"D2X````````````````4
M````=VQS-S O<')O<&5R=&EE<RYT>'2%4$UKPS ,O0?R'P3==5-W&@1Z&AD4
M!BL[]1;<1&T]',O(RMHR]M]G)RNL'6PZV4_O0]+L]L\JBQF,%80#B5J*"?I/
MDRA*?8#."K7*<@)EX$'#H+ C3V*4.MA:E]TRLTG,!6H?<!2;$)QMC5KV,9L`
M;T'W!)'DG>3NDC%JNPHW9'!(C":-^I9B(^J0LJUQ^-.O+*ZU8^[!'2*V[+=V
MA_VIX]Y8?Z5+L1L3"09QOP::'DUJ+?:JH4)TW!JWYZC5PWQ^/^V5L6QVEF^$
M#TD)=*2R^/XL'BM<">_$]/"4+X1+KR2>%.IC<"PDN*S7J^>7U_JN7M?9>#KM
MN,S-Q_F>GSC!9=$Z2UZ;UID8*5Y0+EME\0502P<(3D:RZ!$!```/`@``4$L#
M! H```````V&D2X````````````````.````=VQS-S O<V%M<&QE-"]02P,$
M% `(``@`^X21+@```````````````!T```!W;',W,"]S86UP;&4T+V%P<&QI
M8V%T:6]N+GAM;%6/36_", R&[TC\!Z^77M9X5#M,4P!MT&E,^T "A'9"(;6V
MH#2IDI2/?[^*`BLW^_7[O+;Y<%]HV)+SRII^U&-W$0`9:7-E?OK18OZ2/$3#
M0;?3[?";\==H_CW-0)2E5E*$&H'IXOE],H(X09Q5!CZ4=-8??*#"W\+$2(8X
MGH_A+<TR>&IQ/98B9I\QQ+\AE(^(&[$5S%>&25O@)B7"/.0>6[M6O57*:C%N
MSFE-:@& Y\J76AP2(PH:O)+6=FF=SF?DMDH2QZMY0Y"73I7'B",`2V=U#DM:
MPS_6,AVIPN:5;A+J;D?K4]DT2>74P(NBU'3/=L)Q/(L7E[0FT#XDSMIPMG*\
M4D_A>$[G>-G*\?KS/U!+!PBT=FQ0$0$``,,!``!02P,$% `(``@`RX61+@``
M`````````````!<```!W;',W,"]S86UP;&4T+V)U:6QD+GAM;*5726_;.!2^
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ME8NDX PJG5F*S-PFUD9/`ARV^$S,_T:XHPY:#\&C(]2Q*:]_>C</J5?Y8-P]
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M<M*E!$G;YA7>A9R1G2JY[8NS'DD`9><VQ4ZD]S60X(FQ\1^,H*B04@5_HB9V
MR+J";?TW[G\<`7/<90*]EW5C_1VK")T&#;2LOJA#J?5:`A<%=3&YH,,]2P)G
MRQ/<YUJ22_W0C7D>(A]R,5>BD07\A:DK0YPN3SFA5>FS+L66.%D6`2%'QKY;
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MEV%=CQV?Y_Y3'$^_`%!+!PCTFH+3( 0``)8/``!02P,$"@``````$8:1+@``
M`````````````!4```!W;',W,"]S86UP;&4T+V-L:65N="]02P,$% `(``@`
M[X*1+@```````````````"<```!W;',W,"]S86UP;&4T+V-L:65N="]#;&EE
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M?#&*@$!\K_@<N.0VZX%"_N2A`';)#8E[XRT/P+I#UG3ACY^P0'N)=([:9"V#
M1EMK&5U)"NCPQ*R;K(1:-(I+:S)(M $,_T]<WA8$WJ/8).H3:.W-^QAD+<0H
M6+N&N/+)7&P-,2& Z:.Q6!)56^+2DE;(S!_LDX^7-5%S&,)@.'#/E#B/!09H
MAQ?8DHNY1MD-.O&[,7*H0W![</L(6>ODQL%<.ZVS/(=X2G=.UQ\@_6,,F5_D
M&[ALL!LV`%YD`<JEL50R5$6GG/F&%3K[#:/G3S9S&1JSQ:<:-?B3*,@0WN8;
MW!J%P22*;_TMO5_M\AY8_#>^^ V1+^@W*FJG'^3]1(6HS3)+L@HOZY[^<W6R
MKI^GUL5>; /W-%R G-=%X2;2S'R_X4-G-]&B4#IP\/'I"/C[ALJ]#(>)"&9&
M:%6YR<Y@`.[7)KQN6>(H.9Q5(=#.$(5AG"DED$H(M^DM_JG1V*Q[E4+)-@?I
MJ?B@XPL3*@3.@:1_@Z3?K7[<G.+YM0W,KMINZEKRDHUZ_-Q!0]RQ=_4"1T.B
M87NGN].ZQ[AU\6!ONJ':S4(SX=*56E485MXE8>G<-)[I!$ZW=6?4LF6\@=J;
M'S!1#$/%IM9]X>^T^QPGU':IU4/3$SO?X SW"6MUC0?H:2HE#6;P3%$X2-+@
M?HBF\%_4?RNJ^_T%4$L'"&S_=^_[`@``#0H``%!+`P04``@`" #O@I$N````
M````````````'@```'=L<S<P+W-A;7!L930O8VQI96YT+TUA:6XN:F%V8;54
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MTD4$[^I 1VF.?PQODJL=%O_^`5!+!PC/*:Y>! (``#P%``!02P,$% `(``@`
M[X*1+@```````````````"H```!W;',W,"]S86UP;&4T+VAE;&QO+7=O<FQD
M+6AA;F1L97(M:6YF;RYX;6QMD+$.@C 0AG<3W^'2O; X5A<7=@?GDUZDR;60
M'I#X]H(%4HC=^OWW];_4-!@L4]1U@R[([7P",#L&`3U=547,[;.-;*N4WN=0
M_83YK!+4C"(Z2?W0M]$A%X*^8[H4#XHCQ>4%!9L]^2ZX7G<8T4N&=\&RRKJ>
M)Q%\DX)\'&!$'J8IT!K06K+P^L"AM\R+RW_-IEQ:$MFNZ4\F>""S^0502P<(
M&/JK'I\```!,`0``4$L#!!0`" `(`.^"D2X````````````````D````=VQS
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MA9:Z````& $``%!+`P04``@`" `,AI$N````````````````&0```'=L<S<P
M+W-A;7!L930O<F5A9&UE+FAT;6R%5DMOVS ,O@_H?R!\7F)LQ2Z#:Z"/%=VP
M=L4RH+TJ-E.KE25/DI,8V(\?];!C+VYW262:Y/?Q)3JK;"WRDW<G[P"R"EF9
MNQ.=+;<"\V_GCXN?]Y=PPV0I4)LL#?*H)+A\`8WB+#&V$V@J1)N [1H\2RSN
M;5H8DT"-)6>D4FA$F013@$KCYBQ9+M-2%:EMK=*<B:4W\.ZS--+Q#VM5=CUJ
M]6&&%PF#*L"OBAO /:L;@6 JM3- /V 5M 8'$]AQ6\$.UV!0;WF!R\.K@LG@
M2A.%E.A;L!7"ZL?Y/8E^MVALJM$T2I+#&HUA3V0^@[M6M@J>"L%16C"\1" 8
M#XHZ/%<1=QE48YC-$-#*8F. RZT26RSI`#O-+9=/Q.H`^;E7SY3(^RQ3B?('
M4D98L^(%"?B9;1FQ8<; 1FD?UR@)L(#!E,4:W: 0ZD%I4:YBIIR/))^79RG+
MLY1@>SIC$JOCJ.<0@UHL1T0[EKV)%!4I61L%C[??8</%;'25BV*Q<V$L(J6%
M,UKN:Y'D;[U]$Y]1L=<M%V4`IN8K5-VXHZM^>.-R/S3?$3&O$U@,1P<Y*([*
M') 'B/G*>.3C-,+!";%4K6U:FSY\N5A\O;M.?:.@@1CG!$VW$A@-KIMW9_J$
M$C6CV%U<A2JQ.+285#(&3=WK#,QK'HUJ=8$?=Z8L)TZI21<Q6<:E`DILA.IJ
M-U4NQ7/^*!*/?G45JD#8_\0')==8T.73O<8G#"[1``K!.4.FAYI.0PXC_LST
MG"\20]M$_ ,L, -L\#EGV!=U!.'GQV5X5+MI\P3%])9Q&>=G.+H>\JWP']M+
M_S<=PF/9N"-AMDU"G3Q]UC2"%XQ;UPT=1=!TX18;995+RJN3'-Q$,\OIOAUE
M3FV&"<)IRK-T? 7V(SH>TFM%$[+S]EP:J]LB>!^2$!<3W>*$U<JEVY/N.M#H
M\]?[(JZ^K=^'::"L6EH.D\D^XC%B&-;N:;_91N#&W^F?4K>!:HSP=[13/?R?
MUPQ.IP87=.D'`SBV</%Q6>(^*M^H&OMRTD(][?FE<?F2+'PL_ 502P<(9EEH
M_0\#```U" ``4$L#!!0`" `(`.^"D2X````````````````@````=VQS-S O
M<V%M<&QE-"]397)V97)(86YD;&5R+FIA=F&-5;%NVS 0W0/D'PZ9*!35U*E&
MAM1(VQ1HFL9!4:#HP%!GFRU%JN3)<6#DWTN*I"W9<A(-LD6^]^[XCD<V7/SE
M"P1JR5C)5>EXW2A\-SD].3V1=6,LP1^^XF5+4I57A)9[X/[LNES7JM2\1M=P
M@>7W:_]W'&0;47ZY^'E[,[U<"VQ(&CTY`EMR72FTY2?4:*7X'#]?0B?8E9Z;
MEZ!?T3F_^*G1A&MZ">T,;\K9MXN;`]H(L0,G%\8G@]('4ST^"[A46*,>36V'
M><['_:2/8NZ..! 78JI8SJ:]5U* 4-PYF*%=H4U^@^>CKAP,J[4)+(#&RA4G
MA%YQ0!@]EXM)?WI&5NH%),=W*7>8&'IE9 522V(C8E!L`A2 EM*5:>R\'PD@
MOH<A/(;%V$7$E@ND)#_M!E@1AE@DA^<L*;RMH\09%%V IT&V72/\^@U!#GF%
MUK&<HD5JK89>O P8T;DW1B'7*>U;_->B(S;<B%"+K#U[=(1U:5HJO;6:E&8Y
MX<2%*5<**RC[3U[#-CFR+;XB&]<8[9#!03[PJH0B_9F,4DWM(VQR`0[[$ 2M
MNSH>S!2UF(SP_"*C%>>!&BJ0)E@Q@(<F]4OVK_-,"> P=<,MQ9UQJ5>H3(/Q
M*U#V5%(G@\?X(]1WJU?SR(_2.IHNI:I8C#'.LNA:18>4G5J/-^;U;120#MZ?
MP9ND%U+]P57KL^[QTQROJG FA-9G^^V2P4^"DU@R&!Q#@-NR`V#,84;^GKFS
M_F[HV4)+:QY XP/L70@,MP%R\8]MR'QP]+S:LZ@_A>FWV&3=?*.!"&B+H2P)
M%=SI-!([=F:D/?AQ!)9)_HYPU]XL5A2[+1J<`QU>?E>&CV(+UQUVJP8@YRQ"
MI7;$M4 S'R2^,W2X+SK%O.O38*'C:9WQ^: )T.WPT[B_NE5JYZ]__0=02P<(
M)86WEK("```@" ``4$L!`A0`% `(``@`/8:1+@`````"``````````D`! ``
M`````````````````$U%5$$M24Y&+_[*``!02P$"% `4``@`" `]AI$N<UT-
M_$<```!'````% `````````````````]````345402U)3D8O34%.249%4U0N
M34902P$"% `4``@`" #]@I$N3D:RZ!$!```/`@``% ````````````````#&
M````=VQS-S O<')O<&5R=&EE<RYT>'102P$""@`*```````-AI$N````````
M````````#@`````````````````9`@``=VQS-S O<V%M<&QE-"]02P$"% `4
M``@`" #[A)$NM'9L4!$!``##`0``'0````````````````!%`@``=VQS-S O
M<V%M<&QE-"]A<'!L:6-A=&EO;BYX;6Q02P$"% `4``@`" #+A9$N])J"TR $
M``"6#P``%P````````````````"A`P``=VQS-S O<V%M<&QE-"]B=6EL9"YX
M;6Q02P$""@`*```````1AI$N````````````````%0`````````````````&
M" ``=VQS-S O<V%M<&QE-"]C;&EE;G0O4$L!`A0`% `(``@`[X*1+FS_=^_[
M`@``#0H``"<`````````````````.0@``'=L<S<P+W-A;7!L930O8VQI96YT
M+T-L:65N=$AA;F1L97(N:F%V85!+`0(4`!0`" `(`.^"D2[/*:Y>! (``#P%
M```>`````````````````(D+``!W;',W,"]S86UP;&4T+V-L:65N="]-86EN
M+FIA=F%02P$"% `4``@`" #O@I$N&/JK'I\```!,`0``*@``````````````
M``#9#0``=VQS-S O<V%M<&QE-"]H96QL;RUW;W)L9"UH86YD;&5R+6EN9F\N
M>&UL4$L!`A0`% `(``@`[X*1+OO]A9:Z````& $``"0`````````````````
MT X``'=L<S<P+W-A;7!L930O2&5L;&]7;W)L9%-E<G9I8V4N:F%V85!+`0(4
M`!0`" `(``R&D2YF66C]#P,``#4(```9`````````````````-P/``!W;',W
M,"]S86UP;&4T+W)E861M92YH=&UL4$L!`A0`% `(``@`[X*1+B6%MY:R`@``
M( @``" `````````````````,A,``'=L<S<P+W-A;7!L930O4V5R=F5R2&%N
?9&QE<BYJ879A4$L%!@`````-``T`K@,``#(6````````
`
end
[sample10.zip]

Similar Messages

  • Web-services.xml for EJB component and SOAP Message Handler Chain

    I have used the following example for my own web service with EJB component and SOAP
    Message Handler Chain:
    http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
    I have a deployment error:
    javax.naming.NameNotFoundException: Unable to resolve 'app/ejb/DocumentService.j
    ar#DocumentService/home' Resolved: 'app/ejb' Unresolved:'DocumentService.jar#Doc
    umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
    In attachement is the ear file.
    Is there a problem in web-services.xml?
    Thanks
    [ws_dox_sdi.ear]

    It works. Thanks,
    Ioana
    "Neal Yin" <[email protected]> wrote:
    The error means your EJB is not deployed.
    Adding a EJB module to your application.xml file of the ear should fixe
    it.
    <application>
    <display-name />
    <module>
    <web>
    <web-uri>dox_sdi.war</web-uri>
    </web>
    </module>
    <module>
    <ejb>DocumentService.jar</ejb>
    </module>
    </application>
    "Ioana Meissner" <[email protected]> wrote in message
    news:3cf640cc$[email protected]..
    I have used the following example for my own web service with EJBcomponent and SOAP
    Message Handler Chain:
    http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
    I have a deployment error:
    javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
    ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
    umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
    In attachement is the ear file.
    Is there a problem in web-services.xml?
    Thanks

  • Updating the web-services.xml for WS-Security

    If I wanted to change my webservice from encryption of both the request and response to just encryption of the request how do I manually change the web-services.xml file ??? Do I have to un-archive the ear and re-archive the ear everytime I want to make security changes to the web-services.xml file ?

    It works. Thanks,
    Ioana
    "Neal Yin" <[email protected]> wrote:
    The error means your EJB is not deployed.
    Adding a EJB module to your application.xml file of the ear should fixe
    it.
    <application>
    <display-name />
    <module>
    <web>
    <web-uri>dox_sdi.war</web-uri>
    </web>
    </module>
    <module>
    <ejb>DocumentService.jar</ejb>
    </module>
    </application>
    "Ioana Meissner" <[email protected]> wrote in message
    news:3cf640cc$[email protected]..
    I have used the following example for my own web service with EJBcomponent and SOAP
    Message Handler Chain:
    http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
    I have a deployment error:
    javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
    ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
    umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
    In attachement is the ear file.
    Is there a problem in web-services.xml?
    Thanks

  • Nice parameter names generation in web-services.xml

    Hi
    My session bean has explicit parameter names such as:
    public void createCustomer(String name, String address, String telephoneNumber);
    But inside web-services.xml for his operation, 'servicegen' generates parameters
    name 'string, string0, string1'. Composing the xml becomes a tedious job!
    Is there a way to have this file generated automatically but with the original
    parameter names?
    Thanks for the help,
    guy

    Can source2wsdd be applied to an EJB implementation - the doc mentions only Java class-implemented web service - has this been
    fixed or being fixed in the next wls 7 service pack.
    http://edocs.bea.com/wls/docs70/webserv/assemble.html#1056639
    Thanks.
    Darma
    Shridhar Mysore wrote:
    In WLS 7.0.1 onwards, using "source2wsdd" ant task (quo vide http://e-docs.bea.com/wls/docs70/webserv/anttasks.html#1080421)
    you would be able to preserve the parameter names.
    For instance, if you do :
    <source2wsdd
    javaSource="MyService.java"
    ddFile="web-services.xml"
    typesInfo="temp_dir/WEB-INF/classes/types.xml"
    serviceURI="/MyService" >
    <classpath>
    <pathelement path="temp_dir/WEB-INF/classes"/>
    <pathelement path="${java.class.path}"/>
    </classpath>
    </source2wsdd>
    Then, the signature of a method in the backend component,
    public void testMethod( int a, float fval, String name ){
    would get translated mapped inside web-services.xml as :
    - <operation component="MyService" name="testMethod" method="testMethod">
    - <params>
    <param name="a" class-name="int" type="parms:int" style="in" xmlns:parms="http://www.w3.org/2001/XMLSchema"
    location="body" />
    <param name="fval" class-name="float" type="parms:float" style="in" xmlns:parms="http://www.w3.org/2001/XMLSchema"
    location="body" />
    <param name="name" class-name="java.lang.String" type="parms:string" style="in"
    xmlns:parms="http://www.w3.org/2001/XMLSchema" location="body" />
    </params>
    </operation>
    where you would see that the parameter names are being preserved.
    Regards
    Shridhar
    "Guy Deffaux" <[email protected]> wrote:
    Hi
    My session bean has explicit parameter names such as:
    public void createCustomer(String name, String address, String telephoneNumber);
    But inside web-services.xml for his operation, 'servicegen' generates
    parameters
    name 'string, string0, string1'. Composing the xml becomes a tedious
    job!
    Is there a way to have this file generated automatically but with the
    original
    parameter names?
    Thanks for the help,
    guy

  • Web-services.xml  handler chain

    Hi All,
    My question is this. I use servicegen ant task to generate the web-services.xml
    file,
    then I open the .ear file using winzip and edit the web-services.xml file to include
    the handler-chain information. I have included the following information :
    <handler-chains>
    <handler-chain name="myChain">
    <handler class-name="com.whatever.core.sec.iec.ejb.IECSOAPHandler">
    <init-params>
    <init-param name="logDirectory" value="C:/temp" />
    <init-param name="severityLevel" value="verbose" />
    </init-params>
    </handler>
    </handler-chain>
    </handler-chains>
    and then I include the following in the operation tag:
    <operation method="batchResponseToPSS([B)" component="ejbcomp0" name="batchResponseToPSS"
    handler-chain="myChain">
    and the also following
          <operation method="onlineResponseToPSS([B)" component="ejbcomp0" name="onlineResponseToPSS"
    handler-chain="myChain">
    Without the handler-chains element my app works fine.
    My whole web-sercvices.xml is located at following location:
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=3921&utag=
    Any insight will be appreciated.
    Thanks
    ---Radhe
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    I am still not clear what error you are getting.
    1. Are you saying that the handler is not getting
    called?
    2. or you are not able to invoke the web service
    at all?
    If it is 1 check the web-service.xml file of the ear
    deployed. Make sure that your change is not overwritten
    by servicegen.
    If it is 2 then check the URL of the web service in
    web-service.xml file and use a browser to get to
    that URL.
    Regards,
    -manoj
    http://manojc.com
    "Radhe" <[email protected]> wrote in message
    news:[email protected]...
    >
    Manoj,
    Thanks for your reply. When I bring up the WLS, from the messages on theconsole,
    it comes-up pretty cleanly. Theare are no error messages.
    I looked into log files and their is nothing. This has surprised me.
    I worked with some of my friends and they are clueless. I never thoughtto just
    read SOAP Headers, that I have to go through so much pain.
    Also part of my web-services.xml file is generated through servicegen,then I
    crack open the .ear file strip the web-services.xml file, edit it and putit back.
    >
    IF there is some error I would have fixed it.
    Does handler-chains in web-services.xml work, or it is some fiction, BEAmade
    up. I am clueless where I am screwing it up.
    Thanks
    ---Radhe
    "manoj cheenath" <[email protected]> wrote:
    Can you please post the error message?
    This example may also help you:
    http://www.manojc.com/?sample4
    Regards,
    -manoj
    http://manojc.com
    "Radhe" <[email protected]> wrote in message
    news:[email protected]...
    Hi All,
    My question is this. I use servicegen ant task to generate theweb-services.xml
    file,
    then I open the .ear file using winzip and edit the web-services.xmlfile
    to include
    the handler-chain information. I have included the following
    information
    <handler-chains>
    <handler-chain name="myChain">
    <handler
    class-name="com.whatever.core.sec.iec.ejb.IECSOAPHandler">
    <init-params>
    <init-param name="logDirectory" value="C:/temp" />
    <init-param name="severityLevel" value="verbose" />
    </init-params>
    </handler>
    </handler-chain>
    </handler-chains>
    and then I include the following in the operation tag:
    <operation method="batchResponseToPSS([B)" component="ejbcomp0"
    name="batchResponseToPSS"> >> handler-chain="myChain">> >>> >> and the also following> >>> >>       <operation method="onlineResponseToPSS([B)" component="ejbcomp0"> >name="onlineResponseToPSS"> >> handler-chain="myChain">> >>> >> Without the handler-chains element my app works fine.> >>> >> My whole web-sercvices.xml is located at following location:> >>> >>>>http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=3921&utag=> >>> >>> >> Any insight will be appreciated.> >>> >> Thanks> >> ---Radhe> >> >>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Web-services.xml: cannot set "charset" attribute for alternative encoding

    Hi,
    the definition of the charset attribute in tag web-service in a web-services.xml
    descriptor gets lost, when deploying a web-service.
    Sample:
    Before deployment I defined:
    <web-service charset="ISO-8859-1" useSOAP12="false" targetNamespace="http://www.itpearls.com/unity/SubscriberData"
    name="WebSubscriberDataCollector" style="rpc" uri="/WebSubscriberDataCollector">
    After deployment the console states:
    <web-service jmsUri="ISO-8859-1" useSOAP12="false" exposeWSDL="true" targetNamespace="http://www.itpearls.com/unity/SubscriberData"
    name="WebSubscriberDataCollector" style="rpc" uri="/WebSubscriberDataCollector">
    So the value "ISO-8859-1" changed his master :-(
    I consider this a bug. Is there a workaround for the charset definition of an
    individual web-service?
    Thanks for an comments
    Manfred

    Hi Neal
    my server's locale is not en_US. The locale command delivers:
    $ locale
    LANG=de_CH.ISO8859-1
    LC_CTYPE="de_CH.ISO8859-1"
    LC_NUMERIC="de_CH.ISO8859-1"
    LC_TIME="de_CH.ISO8859-1"
    LC_COLLATE="de_CH.ISO8859-1"
    LC_MONETARY="de_CH.ISO8859-1"
    LC_MESSAGES="de_CH.ISO8859-1"
    LC_ALL=de_CH.ISO8859-1
    but the Weblogic Server remains stubborn on all possibilities according to http://e-docs.bea.com/wls/docs81/webserv/i18n.html#1069538
    and keeps complaining:
    java.io.CharConversionException: Malformed UTF-8 char -- is an XML encoding declaration
    missing?
    My analysis: The Weblogic server seems to expect a UTF-8 compliant stream (due
    to the current user.language property set to "de") regardless of the chosen configuration
    possibilities proposed on the above mentioned link page.
    Q: is this bug related to CR105388 on http://e-docs.bea.com/wls/docs81/notes/issues.html
    Now I urgently need a workaround to make Umlaute contained in a web service request
    working.
    Thanks for any help
    Manfred
    "Manfred Sturm" <[email protected]> wrote:
    >
    Hi Neal
    OK, typo. But it doesn't work. I get the console output:
    java.io.CharConversionException: Malformed UTF-8 char -- is an XML encoding
    declaration
    missing?
    plus I get following stack trace from the web-service client:
    javax.xml.soap.SOAPException: Failed to read a xml element from
    Vorname_aou_AOU091 Name_aou_AOU091 Ort_äou_AOU091 091A 1091 Strasse_aou_AOU091
    bbcs adsl sample string
    at weblogic.webservice.tools.pagegen.SampleInstance.getJavaObject(SampleInstance.java:139)
    at weblogic.webservice.server.servlet.ServletBase.getJavaParams(ServletBase.java:378)
    at weblogic.webservice.server.servlet.ServletBase.invokeMultiOutput(ServletBase.java:347)
    at weblogic.webservice.server.servlet.ServletBase.invokeOperation(ServletBase.java:306)
    at weblogic.webservice.server.servlet.WebServiceServlet.invokeOperation(WebServiceServlet.java:312)
    at weblogic.webservice.server.servlet.ServletBase.handleGet(ServletBase.java:272)
    at weblogic.webservice.server.servlet.ServletBase.doGet(ServletBase.java:154)
    at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebServiceServlet.java:232)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    (server's locale is en_US)
    Alternatively, when using "-Dweblogic.webservice.i18n.charset=ISO-8859-1"
    in
    I get the console output:
    <Oct 7, 2003 11:46:05 AM MEST> <Warning> <Management> <BEA-141087> <Unrecognized
    property: webservice.i18n.charset.>
    which results in the above stack trace when invoking on the web service.
    I still need a workaround within weblogic server. I cannot change the
    Solaris
    server's locale settings.
    Thanks for an comments
    Manfred
    "Neal Yin" <[email protected]> wrote:
    Hi Manfred,
    There is a typo in code. But this should NOT affect any functionality
    (charset attribute is working). Please contact support for a patch.
    Thanks,
    -Neal
    "Manfred Sturm" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    the definition of the charset attribute in tag web-service in aweb-services.xml
    descriptor gets lost, when deploying a web-service.
    Sample:
    Before deployment I defined:
    <web-service charset="ISO-8859-1" useSOAP12="false"
    targetNamespace="http://www.itpearls.com/unity/SubscriberData"
    name="WebSubscriberDataCollector" style="rpc"uri="/WebSubscriberDataCollector">
    After deployment the console states:
    <web-service jmsUri="ISO-8859-1" useSOAP12="false" exposeWSDL="true"
    targetNamespace="http://www.itpearls.com/unity/SubscriberData"
    name="WebSubscriberDataCollector" style="rpc"uri="/WebSubscriberDataCollector">
    So the value "ISO-8859-1" changed his master :-(
    I consider this a bug. Is there a workaround for the charset definitionof
    an
    individual web-service?
    Thanks for an comments
    Manfred

  • What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

    What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
    I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
    Mangal

    Hi Jim,
    I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
    Web Service & XML
    http://myserver_url/admin/ManageResourceKey
    <request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
    <nonce>" . $nonce . "</nonce>
    <expiration>'. $expiration .'</expiration>
    <resourceKey>
    <resource>resource_id</resource>
    <resourceItem>1</resourceItem>
    </resourceKey>
    </request>
    Error Message
    <error xmlns="http://ns.adobe.com/adept"
    data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
    Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
    Magal Varshney

  • XML scheme and Web services enhancement for MS Word integration in CRM 2007

    Hi,
    I am trying to use the Template designer and the web services tool in order to create a MS Word template for the quotation.
    We have created a new web service, using the Web Service Tool
    (transaction BSP_WD_CMPWB, type WS_DESIGN_TOOL). I can use this web service when creating a quotation word template and everything works fine.
    I need to enhance the web service with some custom fields and logic. I found the blog:
    Web-services enhancement for MS Word integration in CRM 2007
    /people/community.user/blog/2008/11/18/web-services-enhancement-for-ms-word-integration-in-crm-2007
    The blog describe how to enhance the web service, extend the output
    structure etc.
    We have done all the steps in the blog, and everything looks fine. When
    we test the web service, using the Web Service Navigator, all the new
    fields we added to the output structure are displayed. The WSDL
    document also looks fine, displayed from the Web Service
    Administration.
    The problem occur when try to create the word template using the
    Template Designer. The XML scheme is not displayed in the word
    document. This only happens if we use an enhanced web service.
    Anyone familiar with this issue?
    Kind regards,
    Johan Wigert

    Hi,
    You may have to upgrade your MS word 2003 to MS Word 2007.
    Before you do that please opening View > toolbars > Task Pane and check if you can get XML Schema from the web service.
    Regards,
    Sandeep Chavan

  • Fault elt in web-services.xml NOT WORKING

    We are trying to capture an invalid message coming into our service before our
    service actually processes it. Per WLS7 documentation, it provides the ability
    to add a <fault> elt under the <params> elt in web-services.xml to perform that.
    Here's how the operations portion of our web-services.xml looks like:
    <operations>
    <operation method="echo(java.lang.String)" component="jcComp0" name="echo"
    handler-chain="diagnosticChain">
    <params>
    <param location="body" class-name="java.lang.String" style="in" name="echoString"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" type="xsd:string">
    </param>
    <return-param location="body" class-name="java.lang.String" name="Result"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" type="xsd:string">
    </return-param>
         <fault name="InvalidMessageException" class-name="com.gmacfs.routeone.diagnostic.InvalidMessageException"/>
    </params>
    </operation>
    </operations>
    However, when we tried doing that, we got a BIG set of exception while trying
    to build our client. It looks as follows:
    client:
    [clientgen] Generating client jar for diagnostic.ear ...
    [clientgen] Could not read Web Service deployment descriptor
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.java:112)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenTask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --- Nested Exception ---
    [clientgen] Could not read Web Service deployment descriptor
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EARClientGen.java:332)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.java:110)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenTask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --- Nested Exception ---
    [clientgen] weblogic.webservice.dd.DDProcessingException: Could not find required
    attribute "type" for element <fault> (Line 28, Column 8)
    [clientgen] at weblogic.webservice.dd.ParsingHelper.getRequiredAttribute(ParsingHelper.java:287)
    [clientgen] at weblogic.webservice.dd.DDLoader.processFaultElement(DDLoader.java:1195)
    [clientgen] at weblogic.webservice.dd.DDLoader.processFaultElements(DDLoader.java:1166)
    [clientgen] at weblogic.webservice.dd.DDLoader.processParamsElement(DDLoader.java:1004)
    [clientgen] at weblogic.webservice.dd.DDLoader.processOperationElement(DDLoader.java:977)
    [clientgen] at weblogic.webservice.dd.DDLoader.processOperationElements(DDLoader.java:853)
    [clientgen] at weblogic.webservice.dd.DDLoader.processOperationsElement(DDLoader.java:841)
    [clientgen] at weblogic.webservice.dd.DDLoader.processWebServiceElement(DDLoader.java:378)
    [clientgen] at weblogic.webservice.dd.DDLoader.processWebServiceElements(DDLoader.java:283)
    [clientgen] at weblogic.webservice.dd.DDLoader.processWebServicesElement(DDLoader.java:271)
    [clientgen] at weblogic.webservice.dd.DDLoader.load(DDLoader.java:249)
    [clientgen] at weblogic.webservice.util.WebServiceWarFile.getWSDD(WebServiceWarFile.java:79)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EARClientGen.java:330)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.java:110)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenTask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --------------- nested within: ------------------
    [clientgen] weblogic.webservice.util.WebServiceJarException: Could not load deployment
    descriptor - with nested exception:
    [clientgen] [weblogic.webservice.dd.DDProcessingException: Could not find required
    attribute "type" for element <fault> (Line 28, Column 8)]
    [clientgen] at weblogic.webservice.util.WebServiceWarFile.getWSDD(WebServiceWarFile.java:81)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EARClientGen.java:330)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.java:110)
    [clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenTask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    BUILD FAILED
    Anybody has any ideas?
    Thanks much,
    sami

    Manoj,
    Thanks a lot, THAT DID IT... two very helpful hints from you in a row.
    By the way, one thing worth mentioning is that the Weblogic documentation that
    we explored did not have enough information about that issue.
    Thanks again.
    sami
    "manoj cheenath" <[email protected]> wrote:
    Buried deep in the stack trace, is this little
    detail:
    Could not find required
    attribute "type" for element <fault> (Line 28, Column 8)
    So the correct DD should look something like:
    <fault type="typeNS:string"
    xmlns:typeNS="http://www.w3.org/2001/XMLSchema"
    class-name="tutorial.sample9.HelloWorldException"
    name="HelloWorldException">
    </fault>
    Also, check out this example:
    http://manojc.com/?sample9
    There is a know problem: WLS can not handle
    exceptions that contain complex data types.
    This will be fixed in SP1.
    Regards,
    -manoj
    http://manojc.com
    "sami titi" <[email protected]> wrote in message
    news:[email protected]...
    We are trying to capture an invalid message coming into our servicebefore
    our
    service actually processes it. Per WLS7 documentation, it providesthe
    ability
    to add a <fault> elt under the <params> elt in web-services.xml toperform
    that.
    Here's how the operations portion of our web-services.xml looks like:
    <operations>
    <operation method="echo(java.lang.String)" component="jcComp0"name="echo"
    handler-chain="diagnosticChain">
    <params>
    <param location="body" class-name="java.lang.String" style="in"name="echoString"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" type="xsd:string">
    </param>
    <return-param location="body" class-name="java.lang.String"name="Result"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" type="xsd:string">
    </return-param>
    <fault name="InvalidMessageException"class-name="com.gmacfs.routeone.diagnostic.InvalidMessageException"/>
    </params>
    </operation>
    </operations>
    However, when we tried doing that, we got a BIG set of exception whiletrying
    to build our client. It looks as follows:
    client:
    [clientgen] Generating client jar for diagnostic.ear ...
    [clientgen] Could not read Web Service deployment descriptor
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.ja
    va:112)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenT
    ask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] atorg.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] atorg.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] atorg.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --- Nested Exception ---
    [clientgen] Could not read Web Service deployment descriptor
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EAR
    ClientGen.java:332)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.ja
    va:110)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenT
    ask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] atorg.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] atorg.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] atorg.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --- Nested Exception ---
    [clientgen] weblogic.webservice.dd.DDProcessingException: Could notfind
    required
    attribute "type" for element <fault> (Line 28, Column 8)
    [clientgen] atweblogic.webservice.dd.ParsingHelper.getRequiredAttribute(ParsingHelper.java
    :287)
    [clientgen] atweblogic.webservice.dd.DDLoader.processFaultElement(DDLoader.java:1195)
    [clientgen] atweblogic.webservice.dd.DDLoader.processFaultElements(DDLoader.java:1166)
    [clientgen] atweblogic.webservice.dd.DDLoader.processParamsElement(DDLoader.java:1004)
    [clientgen] atweblogic.webservice.dd.DDLoader.processOperationElement(DDLoader.java:977)
    [clientgen] atweblogic.webservice.dd.DDLoader.processOperationElements(DDLoader.java:853)
    [clientgen] atweblogic.webservice.dd.DDLoader.processOperationsElement(DDLoader.java:841)
    [clientgen] atweblogic.webservice.dd.DDLoader.processWebServiceElement(DDLoader.java:378)
    [clientgen] atweblogic.webservice.dd.DDLoader.processWebServiceElements(DDLoader.java:283)
    [clientgen] atweblogic.webservice.dd.DDLoader.processWebServicesElement(DDLoader.java:271)
    [clientgen] at weblogic.webservice.dd.DDLoader.load(DDLoader.java:249)
    [clientgen] atweblogic.webservice.util.WebServiceWarFile.getWSDD(WebServiceWarFile.java:79
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EAR
    ClientGen.java:330)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.ja
    va:110)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenT
    ask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] atorg.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] atorg.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] atorg.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    [clientgen] --------------- nested within: ------------------
    [clientgen] weblogic.webservice.util.WebServiceJarException: Couldnot
    load deployment
    descriptor - with nested exception:
    [clientgen] [weblogic.webservice.dd.DDProcessingException: Could not
    find>required>> attribute "type" for element <fault> (Line 28, Column 8)
    [clientgen] atweblogic.webservice.util.WebServiceWarFile.getWSDD(WebServiceWarFile.java:81
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.getWebServiceDD(EAR
    ClientGen.java:330)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.EARClientGen.run(EARClientGen.ja
    va:110)
    [clientgen] atweblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenT
    ask.java:270)
    [clientgen] at org.apache.tools.ant.Task.perform(Task.java:217)
    [clientgen] at org.apache.tools.ant.Target.execute(Target.java:164)
    [clientgen] atorg.apache.tools.ant.Target.performTasks(Target.java:182)
    [clientgen] atorg.apache.tools.ant.Project.executeTarget(Project.java:601)
    [clientgen] atorg.apache.tools.ant.Project.executeTargets(Project.java:560)
    [clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:454)
    [clientgen] at org.apache.tools.ant.Main.start(Main.java:153)
    [clientgen] at org.apache.tools.ant.Main.main(Main.java:176)
    BUILD FAILED
    Anybody has any ideas?
    Thanks much,
    sami

  • Best SOAP Web Services Architecture for E-Commerce

    Hi there,
    I have developed an E-Commerce system following the normal way of
    developing Java web applications (all classes and JSP files in one Eclipse web project).
    I want to modularize the application, I want to split the application into
    two applications:
    1. The core app, with SOAP web services methods
    2. The client (front-end JSP files and some servlets to request/receive responses from the SOAP web services core app)
    Basically, I want the servlets in the client app to call the core SOAP web services app for data such as
    get product by ID, get customer by ID, etc...
    The core SOAP web services app would then return a response in an XML format, which I then
    would map to Java objects at the client application.
    My questions are:
    1. Is this the right way to go?
    2. Where should the session management be? At the client app?
    Hope you can help?
    I have been thinking about a proper architecture for 2 years and honestly it's been giving me sleeping problems.
    Thanks!

    It works. Thanks,
    Ioana
    "Neal Yin" <[email protected]> wrote:
    The error means your EJB is not deployed.
    Adding a EJB module to your application.xml file of the ear should fixe
    it.
    <application>
    <display-name />
    <module>
    <web>
    <web-uri>dox_sdi.war</web-uri>
    </web>
    </module>
    <module>
    <ejb>DocumentService.jar</ejb>
    </module>
    </application>
    "Ioana Meissner" <[email protected]> wrote in message
    news:3cf640cc$[email protected]..
    I have used the following example for my own web service with EJBcomponent and SOAP
    Message Handler Chain:
    http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
    I have a deployment error:
    javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
    ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
    umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
    In attachement is the ear file.
    Is there a problem in web-services.xml?
    Thanks

  • How to generate param-prefix in web-services.xml

    Hello I am using source2wsdd to generate my WSDL and my web-services.xml. For sake
    of interoperability I would like to have the type param-prefix in the web-services.xml
    file. From my Bean class what kind of javadoc comments would help me generate
    the type param-prefix ?
    I also would like the location="header" in the param list.
    Thanks,
    Aswin.
    <param xmlns:param-prefix="http://tempuri.org/"
    type="param-prefix:SOAPCredentials"
    location="header"
    class-name="com.xyz.webservices.SOAPCredentials"
    name="SOAPCredentials"
    style="in">
    </param>
    <return-param xmlns:param-prefix="http://tempuri.org/"
    type="param-prefix:GetFileProfileInformationResponse"
    class-name="com.xyz.webservices.GetFileProfileInformationResponse"
    name="parameters">
    </return-param>
    </params>

    Please try this:
    * @wlws:part p_SOAPAuthToken location="header"
    * type="typeNS:p_SOAPAuthToken"
    * class-name="com.xyz.webservices.SOAPAuthToken"
    * style="inout"
    * xmlns:typeNS=http://namespace/of/the/type
    * @wlws:part p_SOAPCredentials location="header"
    * type="typeNS:p_SOAPCredentials"
    * class-name="com.xyz.webservices.SOAPCredentials"
    * style="in"
    * xmlns:typeNS=http://namespace/of/the/type
    * @ejbgen:remote-method
    public void login(SOAPAuthToken p_SOAPAuthToken,
    SOAPCredentials p_SOAPCredentials)
    I did not try this one out. So i can only hope that it works.
    Regards,
    -manoj
    http://manojc.com
    "Aswin Dinakar" <[email protected]> wrote in message
    news:40aeeb5d$1@mktnews1...
    >
    I tried this
    * @wlws:part p_SOAPAuthToken location="header"
    * @wlws:part p_SOAPAuthToken type="param-prefix:p_SOAPAuthToken"
    * @wlws:part p_SOAPAuthTokenclass-name="com.xyz.webservices.SOAPAuthToken"
    * @wlws:part p_SOAPAuthToken style="inout"
    * @wlws:part p_SOAPCredentials location="header"
    * @wlws:part p_SOAPCredentials type="param-prefix:p_SOAPCredentials"
    * @wlws:part p_SOAPCredentialsclass-name="com.xyz.webservices.SOAPCredentials"
    * @wlws:part p_SOAPCredentials style="in"
    * @ejbgen:remote-method
    public void login(SOAPAuthToken p_SOAPAuthToken,
    SOAPCredentials p_SOAPCredentials)
    and I got the following error -
    [source2wsdd] source2wsdd: In doclet classweblogic.webservice.tools.ddgen.Servi
    ceGen, method start has thrown an exceptionjava.lang.reflect.InvocationTargetE
    xception
    [source2wsdd] weblogic.xml.stream.XMLStreamException: Attribute QNamevalue "par
    am-prefix:p_SOAPAuthToken" does not map to a prefix that is in scope
    [source2wsdd] atweblogic.webservice.dd.NSAttribute.getValueAsXMLName(NSAttrib
    ute.java:45)
    [source2wsdd] atweblogic.webservice.dd.DDLoader.processParamElement(DDLoader.
    java:1252)
    "manoj cheenath" <[email protected]> wrote:
    Check out this example:
    http://manojc.com/?sample3
    You can find more details regarding the tags here:
    http://manojc.com/tutorial/sample3/source2wsdd.html
    Regards,
    -manoj
    http://manojc.com
    "Aswin D" <[email protected]> wrote in message
    news:[email protected]...
    Hello I am using source2wsdd to generate my WSDL and my
    web-services.xml.
    For sake
    of interoperability I would like to have the type param-prefix inthe
    web-services.xml
    file. From my Bean class what kind of javadoc comments would help megenerate
    the type param-prefix ?
    I also would like the location="header" in the param list.
    Thanks,
    Aswin.
    <param xmlns:param-prefix="http://tempuri.org/"
    type="param-prefix:SOAPCredentials"
    location="header"
    class-name="com.xyz.webservices.SOAPCredentials"
    name="SOAPCredentials"
    style="in">
    </param>
    <return-param xmlns:param-prefix="http://tempuri.org/"
    type="param-prefix:GetFileProfileInformationResponse"
    class-name="com.xyz.webservices.GetFileProfileInformationResponse"
    name="parameters">
    </return-param>
    </params>

  • Error while inluding xsd:whiteSpace in web-services.xml

    Hi,
    i am trying to allow the xml attribute values to preserve the whiteSpace characters(tabs, line feeds, carriage returns etc...)
    In web-services.xml i am adding
    <xsd:complexContent>
    <xsd:restriction base="xsd:string">
    <xsd:attribute name="address">
    <xsd:whiteSpace value="preserve"/>
    </xsd:attribute>
    </xsd:restriction>
    </xsd:complexContent>
    But i am getting a run time exception as
    [weblogic.xml.schema.model.parser.XSDParseException: invalid element "xsd:whiteSpace" AT line 0, column 0: <['http://www.w3.org/2001/XMLSchema']:xsd:whiteSpace value="preserve">]
    am i doing in a correct way?
    Please suggest me.
    Thanks
    subba.

    weblogic server doesn't support some of the xsd features.
    WebLogic Server does not support the following XML Schema features:
    ?     Complex data type inheritance by restriction
    ?     Union simple data types
    ?     References to named model groups
    ?     Nested content models in a single complex type
    ?     Redefinition of declarations
    ?     Identity constraints (key, keyref, unique)
    ?     Nested XSD model groups with other content models at the same level.
    There cannot be a modelgroup (say sequence) that contains another nested modelgroup (say choice), and a content element (say element). So, if a nested modelgroup is required, make sure that it contains only another model group and no other content element.
    ?     Wildcards
    but i didn't understand why its giving error for whiteSpace.
    Can someone reply to this please,, its urgent for me.
    thanks
    subba.

  • Issues in Web service created for updating the Sales Order

    Hi All,
    We created a Web service using the Web service tool in CRM 7.0 ( Using the Component WS_DESIGN_TOOLS )
    Web service was created for three modes such as READ, CREATE and CHANGE Modes.
    READ Web Service we tested and its working fine as we were able to see the data for an existing Sales Order in the Web Service.
    We expect that the Change Web Service will update the data of an existing Sales Order.
    Through our Web service we are passing the Order GUID ,Order ID and some Header Fields as well as Item Fields but  the in the Web Service we are getting a message that Web service executed successfully but the CRMD_ORDERADM_H Table isnot getting updated.
    What could be problem.
    Any suugestions will be highly appreciated.
    Regards,
    Sijo

    Hi Gourav,
    I checked in SICF for the Webservice name created.
    this is the service path
    /default_host/sap/bc/srt/rfc/sap/ for the corresponding Web Service created in DEV 200 Client.
    I checked in SOAMANAGER and saw  that the  endpoitnts were zero.
    the Search Operation for Webservice have got three query fields mainly
    Object Id, Posting Date,Procees Type
    If we give Process Type
    sign - blank
    option - blank
    low - YPO ( Custom )
    High - blank we are getting 126 entries.
    and if we check for the Process Type YPO (Custom ) in CRMD_ORDERADM_H Tbale also we are getting the same no of entries.
    but only for option BT , for Posting Date issue is thr..
    Any inputs to move forward will be highly appreciated.
    Regards,
    Sijo.
    Edited by: sijokjohn85 on Mar 5, 2010 10:52 PM

  • Web Service/XML-RPC:  SMTP to BC4J web service bridge ??

    A new business problem just landed on my desk for a possible solution.
    One way XML documents coming in from a Novel mail server doing SMTP forward to something
    in the OC4J, BC4J, side to receive and parse the XML.
    It would be great of course if the JDev / OC4J web services tools had a SMTP service
    that would route inbound SMTP messages at email address to a particular Servlet.post().
    Any other ideas??
    Thanks much,
    curt

    I don't have answer for the SMTP binding as currently the Oracle9iAS J2EE Web Services engine doesn't support an SMTP binding (checking with product management to see if their is any solution today). I suspect this is a manual exercise parsing the SMTP message and extracting the SOAP message.
    However with BC4J you do get in Oracle9i JDeveloper 9.0.2 the ability to consume/publish SOAP messages. And the readXML and writeXML methods on the BC4J view objects help deal with the content of your SOAP messages. So some of the work has been done for you.
    If you haven't seen this already, here is what the publishing side looks like. First, if you build a remote method in your <applicationModule>impl.java file with a signature like (everything in "<xxx>" is specific to your implementation), you can publish it as a Web service. For example:
    import org.w3c.dom.*;
    import oracle.xml.parser.v2.*;
    public org.w3c.dom.Element getBC4JXMLDocument (String parm) {
    get<some BC4J view>().setWhereClause("<some column from your BC4J view>" = parm);
    // Assuming your column is a String :-)
    get<some BC4J view>().setWhereClauseParam(0, parm);
    return (Element)get<some BC4J view>().writeXML(1,Row.XML_OPT_ALL_ROWS);
    Then publish the application module method as a Web service (see: http://otn.oracle.com/products/ids/daily/may10.html)
    It is pretty easy to build a client from the WSDL that is generated using the JDev wizards. Once you have the stub your code would look something like:
    import org.w3c.dom.*;
    import oracle.xml.parser.v2.*;
    org.w3c.dom.Element x = stub.getBC4JXMLDocument("your_parameter");
    XSLProcessor l_processor = new XSLProcessor();
    XSLStylesheet l_xsl = l_processor.newXSLStylesheet(this.getClass().getClassLoader().getResourceAsStream("some.xsl"));
    l_processor.showWarnings(true);
    l_processor.setErrorStream(System.err);
    DocumentFragment l_result = l_processor.processXSL(l_xsl,(XMLElement)e);
    // now feed the transformed XML document into the receiving BC4J view object using the readXML method
    The neat thing, which I think is the gist of your message, is that you could then use the BC4J readXML message to parse the incoming XML message and inflate it back into a BC4J view object. The net result would be moving an entire dataset over SOAP to a BC4J client.
    The SMTP binding would have to worked into the stub code generated. I don't have sample code that would help here right now but will check around.
    Mike.

  • Web-services enhancement for MS Word

    Hi,
    I have done all the steps described in the blog /people/community.user/blog/2008/11/18/web-services-enhancement-for-ms-word-integration-in-crm-2007 about Web-services enhancement for MS Word,  but the last step I did not complete successfully.
    When I start the template designer no offer structure OUTPUT of web service, the template is blank.
    The funny thing is that when I delete the APPEND structure with fields Z, and I press Check button and activate the web service again I have no problem, I start the template designer and reappear standard fields.
    Anyone have any idea what happens?
    Thanks and regards

    Hi,
    You may have to upgrade your MS word 2003 to MS Word 2007.
    Before you do that please opening View > toolbars > Task Pane and check if you can get XML Schema from the web service.
    Regards,
    Sandeep Chavan

Maybe you are looking for