Changing Windows drive icon in boot loader
Hi. I found this guide on how to change the windows drive icon in boot loader. I followed the steps but when i want to copy the ._ICON file, there is no such file on the list and Terminal won't let me copy it.
When i go to the /Volumes/ directry and type "ls -la" i get the list:
drwxrwxrwt@ 5 root admin 170 Jan 31 17:40 .
drwxrwxr-t@ 37 root admin 1326 Jan 31 16:43 ..
drwxrwxrwx@ 1 differenxe staff 16384 Jan 31 17:23 ICON (this is the USB drive with changed icon)
drwxr-xr-x 1 differenxe staff 4096 Jan 31 2009 Untitled (this is the Windows drive)
lrwxr-xr-x 1 root admin 1 Jan 31 2009 Mac -> /
Apparently there is no ._ICON file. What should i do?
Message was edited by: differenxe
Oops, i forgot to add the link to the guide. So here it is: http://wiki.onmac.net/index.php/Personalizeyourbootloader
Similar Messages
-
Hi, never used support before - here goes!
My Mac G4 MDD no longer shows the start up hard drive icon. The one with all my files on!
It shows the other 3 hard drive icons and boots up OK.
Has my start up hard drive failed? Can it be fixed?
Thanks.
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.2)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.5.7f1Doesn't sound like any hard drive failure to me - more a Finder preference.
Finder -> Preferences -> General -> Show these items on the desktop -> Hard disks
The startup disk is sometimes treated differently from other disks (such as external and network disks) and I'm guessing this is a simple preference setting, although I might be wrong. -
Change Hard Drive Icon for Bootcamp Partition
I'd like to change the desktop icon (on the Leopard side) for the Vista Bootcamp partition, however, the normal strategies don't work (presumably due to the read only properties of NTFS). Is that icon stuck as the generic one until I make NTFS writable?
Well, NTFS is not writable by OS X, but you can change the name and possibly the icon when booted into Windows.
Although you can read/write NTFS in OS X by installing MacFuse and the NTFS-3G_2009.2.1u1-ublio-catacombae filesystem, I don't know if it enables changing the Desktop icon. You will find both items at VersionTracker or MacUpdate. -
Hard drive icon during boot up
not sure what the problem is but when i boot up my macbook pro. sometimes i get a hard drive icon and it's labeled as my main drive inside the laptop but i have to click on the button to continue booting up. any ideas what could be causing this? it happens both when my external drives are connected and not connected.. lately its been happening more often.
Hi,
Navigate here....
Black Apple > System Preferences > System > Start up Disk.
From there you can choose which drive the computer will boot from. Select your own, internal, hard drive. Job done.
Regards.
Ian.
Note to self - Must learn to type faster than V.K.
Message was edited by a man in a dark suit, wearing sun glasses. -
Changing hard drive icon?
a long time ago i changed the icon on my macbooks hard drive and since then ive installed boot camp. After that i erased the icon and reverted the icon image to the original icon (the gray silver looking one). But when i hold option when restarting my macbook to load the hard drive menu to either boot into os x or boot camp the icon on os x is still that old icon that ive erased before.. how do i change that icon image? remember the icon on my desktop for the hard drive is the stock one already. any help would be great! thanks
You can change the icon for all networked drives but not just one. You'd use something like Candy Bar do do it.
-
After HD change, Windows partition no longer boots up
Recently, I replaced my internal Hard drive on an early 2008 Macbook with a Solid State Drive. The original Hard drive had both an OS X partition and boot camp partition. I am currently using this drive as a external storage device (I did not delete anything, both partitions are still there with their respective operating systems) via a USB hard drive enclosure. Occasionally, I need to boot into Windows, but when I try to boot off the external drive, I get a black screen with a small blinking white line, and eventually, the error message that there is no bootable media. Please help!
Windows does not work from an external USB drive. It never has.
-
Change Windows Bootcamp icon in Finder
Hi all!
I knew the procedure under Tiger..
cd /Volumes
ls -la
than cp ._pendrive ._WindowsXp (for example)
and all the rest...my problem is in Leopard...i can't see anything called ._something in /Volumes..
I was doin' this in TIger and it works, something is changed I suppose..I am experiencing the exact same behavior. I have patched bootcamp to 3.2 and that does not help. Per other threads on the interwebs, I see there are workarounds:
1) Holding option key down when starting system allows you to select boot partition.
2) Bootcamp control panel widget allows you to select boot disk; much like you see in Mac OSX. -
How to change Flash Drive icons (mine shows as a default)
Why does This keep happening ? on every mac my Flash drive has the icon but on mine it shows like this
I always have converted .png files to .icns files. You can do this for free from iconverticons.com. Click on Use iConvert icons Online.
I think the following might work when using the .png file.
Open the .png file in Preview
Press Command+A to select the entire image
Press Command+C to copy the selection
Do a Get Info on Macintosh HD and click the thumbnail icon to select it
Press Command+V to paste the image -
Changing usb drive icon.
has external hard disks have own icon, I would to have one for pendrives.... because I use a lot of, and I have to guest what is a mounted disk image or what is a pendrive.
The method I have used involves only use of Finder. A generic method . Get a suitable icon. Select it. Copy to clipboard. Highlight icon to be changed. Click Command +I. In the information box, highlight the icon at the top left of the box. Do a paste. Paste the contents of clipboard to the place of the standard icon. Two things . Make it a jpeg or Tiff and not some esoteric format. Make it a decent size. Secondly you may find you don't own the file whose icon you want to change. This OS user does not own the Mac Hd volume. System can read and write, Admin can read and write. the rest can only read. To get round that, other than using an admin login, temporarily add the user logged into to the permissions list. Temporarily give that user read write permission. Perform the paste then reverse the user addition etc. You do this with the users with the bottom section of the Command+I box. Click on the lock. Authenticate. Click the plus sign at the left. From the dialogue that pops up choose the desired user then with the double disclosure arrows, choose read write permission. BUT do change the things back to the default once the icon is changed.
One can either make one's own icon up or browse the web for the sets of free ready mades. I took a backup app icon to use for the appropriate backup partition of an external HD. -
Change Optical Drive in XServe (Slot Load)
I have an XServe (Slot Load) and want to swap out the slot load CD-ROM for a DVD-ROM. Is it possible and what is the part number for the DVD-ROM?
Thanks!
TomHi Tom
It might be possible to use a DVD-ROM from an iBook G4? If you can get one cheap on eBay it might be worth a shot? You might find this useful:
http://www.scribd.com/doc/103408/xserve
Scroll down to the Exploded View section as it might give you an idea of what it looks like. I regularly repair Apple hardware, amongst them iBook G4s. Judging by what I see in the Exploded View they look very similar?
Perhaps someone else may know different?
Tony -
Hİ,
İ have apple icons and I would like to change windows 7 icons.
How can I do?
subject editedyou may need to install 3rd party applications to change the icons.
which operation system do you have?
http://www.microangelo.us/mod.asp -
Boot message: problem with hard drive detected. Slow loading of windows 7
Good Day
I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
the messsage says hard drive failure imminent you should back up you data etc.
My specs are:
Intel core 2 duo e8400 3.0 ghz
4 gig ddr3 transcend
1 tb seagate 7200.12
giga byte nvidia 9800 gt 1 gig ddr3
Please help lots of data.Another option:
Take your hard drive out and slave it into another KNOWN WORKING PC.
Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
MCSE: 6771498 -
Bob, how did you change the icon of your Windows drive?
CandyBar only shows my Macintosh HD in the volumes window.
I am afraid to drag it into CandyBar's volumes window as this might unmount it and cause all sorts of issues.
Thanks ... KenClick the icon (of the Winodws drive) and click '+I', do the same with the icon you would like to replace it with. Click the little icon [that is there when you click '+I' (its really small in the top left corner) on the icon you are going to use to make it for the Windows drive] until there is a blue highlight around it. Once it is, click '+c', now go and switch to the Windows drive & make it highlighted, and then click '+v'. You should see the icon change to the one you replaced it with.
This doesn't make very much sense but I hope it helps =) -
Arch & Windows 8 Dual Boot -- Windows Boot Loader loads grub-rescue
Arch works fine,but as it always happens Windows boot went down. Both OS are EFI.
Note that boot secure and fast boot were disabled for Windows 8.
I used os-prober, but did not fix anything; so, I removed it. I tried to hack things out using boot-repair from Ubuntu, but it requires a repository, grub-efi, from Ubuntu that Arch doesn't have.
I am trying to modify files in grub.d and grub.cfg and hopefully fix something.
Exact description:
- archgrub loads and shows 3 entries. Two for Arch that load the sys succesfully and one for Windows 8 that fails.
- When I try to execute Windows from grub, it brings me to a grub rescue>
and shows error /boot/grub/x86_64-efi/normal.mod not found
As far as I am concerned this .mod is from Linux, so I don't know why it is being called into Windows loading procedures.
lsblk returns:
[jav@localhost ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
|-sda1 8:1 0 1000M 0 part
|-sda2 8:2 0 260M 0 part
|-sda3 8:3 0 1000M 0 part
|-sda4 8:4 0 128M 0 part
|-sda5 8:5 0 605.3G 0 part
|-sda6 8:6 0 5.4G 0 part /boot/efi
|-sda7 8:7 0 25G 0 part
|-sda8 8:8 0 20G 0 part
|-sda9 8:9 0 244.1G 0 part /
`-sda10 8:10 0 29.3G 0 part
sr0 11:0 1 1024M 0 rom
Here's the output of fdisk. Another weird thing is that sometimes ubuntu would show on my terminal. See the first line below, "jav@ubuntu"?!
[jav@ubuntu ~]$ sudo fdisk -l
[sudo] password for jav:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: [i deleted this]
Device Start End Size Type
/dev/sda1 2048 2050047 1000M Windows recovery environment
/dev/sda2 2050048 2582527 260M EFI System
/dev/sda3 2582528 4630527 1000M unknown
/dev/sda4 4630528 4892671 128M Microsoft reserved
/dev/sda5 4892672 1274335231 605.3G Microsoft basic data
/dev/sda6 1847777280 1859151871 5.4G EFI System
/dev/sda7 1859151872 1911580671 25G Microsoft basic data
/dev/sda8 1911580672 1953523711 20G Windows recovery environment
/dev/sda9 1335775232 1847777279 244.1G Linux filesystem
/dev/sda10 1274335232 1335775231 29.3G Microsoft basic data
And, bootinfoscript output:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi /bootmgr /boot/bcd
sda4: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda6: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.02 ... :..(:,:0:4:8:....D:H:L:[.T:[.\:`:d:[.l:p:t:x:|:.:.:.:.:.:.:.:.....................
Boot sector info: Syslinux looks at sector 99102 of /dev/sda6 for its
second stage. SYSLINUX is installed in the /syslinux
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grub/grub.cfg /syslinux/syslinux.cfg
/syslinux/ldlinux.sys
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /etc/fstab
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,050,047 2,048,000 Windows Recovery Environment (Windows)
/dev/sda2 2,050,048 2,582,527 532,480 EFI System partition
/dev/sda3 2,582,528 4,630,527 2,048,000 -
/dev/sda4 4,630,528 4,892,671 262,144 Microsoft Reserved Partition (Windows)
/dev/sda5 4,892,672 1,274,335,231 1,269,442,560 Data partition (Windows/Linux)
/dev/sda6 1,847,777,280 1,859,151,871 11,374,592 EFI System partition
/dev/sda7 1,859,151,872 1,911,580,671 52,428,800 Data partition (Windows/Linux)
/dev/sda8 1,911,580,672 1,953,523,711 41,943,040 Windows Recovery Environment (Windows)
/dev/sda9 1,335,775,232 1,847,777,279 512,002,048 Data partition (Linux)
/dev/sda10 1,274,335,232 1,335,775,231 61,440,000 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 CE62D9F062D9DCF1 ntfs WINRE_DRV
/dev/sda10 150a8788-6049-45ed-85af-ded92a2c0801 ext4
/dev/sda2 16DC-8816 vfat SYSTEM_DRV
/dev/sda3 7CDD-0403 vfat LRS_ESP
/dev/sda4
/dev/sda5 40E4E0CFE4E0C7EC ntfs Windows8_OS
/dev/sda6 9C3F-2A9E vfat
/dev/sda7 7240E43740E40427 ntfs LENOVO
/dev/sda8 422CE5EA2CE5D945 ntfs PBR_DRV
/dev/sda9 1a765403-f251-43d8-8edf-c191475d3837 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 /boot vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda6 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda9 / ext4 (rw,relatime,data=ordered)
============================= sda6/grub/grub.cfg: ==============================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
## Attempt at fixing grub
# insmod fat
# set root='hd0,gpt6'
### BEGIN /etc/grub.d/30_os-prober ###
#menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
# insmod part_gpt
# insmod fat
# set root='hd0,gpt2'
# if [ x$feature_platform_search_hint = xy ]; then
# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
# else
# search --no-floppy --fs-uuid --set=root 16DC-8816
# fi
# chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8 UEFI" {
set root='(hd0,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
========================= sda6/syslinux/syslinux.cfg: ==========================
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL poweroff
MENU LABEL Poweroff
COM32 poweroff.c32
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sda6: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sda6: Version of COM32(R) files used by Syslinux: ===============
syslinux/cat.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/cmd.c32 : not a COM32/COM32R module
syslinux/config.c32 : not a COM32/COM32R module
syslinux/cptime.c32 : not a COM32/COM32R module
syslinux/cpuid.c32 : not a COM32/COM32R module
syslinux/cpuidtest.c32 : not a COM32/COM32R module
syslinux/debug.c32 : not a COM32/COM32R module
syslinux/disk.c32 : not a COM32/COM32R module
syslinux/dmitest.c32 : not a COM32/COM32R module
syslinux/elf.c32 : not a COM32/COM32R module
syslinux/ethersel.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/gpxecmd.c32 : not a COM32/COM32R module
syslinux/hdt.c32 : not a COM32/COM32R module
syslinux/hexdump.c32 : not a COM32/COM32R module
syslinux/host.c32 : not a COM32/COM32R module
syslinux/ifcpu.c32 : not a COM32/COM32R module
syslinux/ifcpu64.c32 : not a COM32/COM32R module
syslinux/ifmemdsk.c32 : not a COM32/COM32R module
syslinux/ifplop.c32 : not a COM32/COM32R module
syslinux/kbdmap.c32 : not a COM32/COM32R module
syslinux/kontron_wdt.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libgpl.c32 : not a COM32/COM32R module
syslinux/liblua.c32 : not a COM32/COM32R module
syslinux/libmenu.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/linux.c32 : not a COM32/COM32R module
syslinux/ls.c32 : not a COM32/COM32R module
syslinux/lua.c32 : not a COM32/COM32R module
syslinux/mboot.c32 : not a COM32/COM32R module
syslinux/meminfo.c32 : not a COM32/COM32R module
syslinux/menu.c32 : not a COM32/COM32R module
syslinux/pcitest.c32 : not a COM32/COM32R module
syslinux/pmload.c32 : not a COM32/COM32R module
syslinux/poweroff.c32 : not a COM32/COM32R module
syslinux/prdhcp.c32 : not a COM32/COM32R module
syslinux/pwd.c32 : not a COM32/COM32R module
syslinux/pxechn.c32 : not a COM32/COM32R module
syslinux/reboot.c32 : not a COM32/COM32R module
syslinux/rosh.c32 : not a COM32/COM32R module
syslinux/sanboot.c32 : not a COM32/COM32R module
syslinux/sdi.c32 : not a COM32/COM32R module
syslinux/sysdump.c32 : not a COM32/COM32R module
syslinux/vesainfo.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
syslinux/vpdtest.c32 : not a COM32/COM32R module
syslinux/whichsys.c32 : not a COM32/COM32R module
syslinux/zzjson.c32 : not a COM32/COM32R module
=============================== sda9/etc/fstab: ================================
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda9
UUID=1a765403-f251-43d8-8edf-c191475d3837 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda6
#UUID=9C3F-2A9E /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
UUID=9C3F-2A9E /boot vfat defaults 0 2
UUID=9C3F-2A9E /boot/efi vfat defaults 0 1
============== sda9: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/cat.c32 : not a COM32/COM32R module
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/cmd.c32 : not a COM32/COM32R module
boot/syslinux/config.c32 : not a COM32/COM32R module
boot/syslinux/cptime.c32 : not a COM32/COM32R module
boot/syslinux/cpuid.c32 : not a COM32/COM32R module
boot/syslinux/cpuidtest.c32 : not a COM32/COM32R module
boot/syslinux/debug.c32 : not a COM32/COM32R module
boot/syslinux/disk.c32 : not a COM32/COM32R module
boot/syslinux/dmitest.c32 : not a COM32/COM32R module
boot/syslinux/elf.c32 : not a COM32/COM32R module
boot/syslinux/ethersel.c32 : not a COM32/COM32R module
boot/syslinux/gfxboot.c32 : not a COM32/COM32R module
boot/syslinux/gpxecmd.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/hexdump.c32 : not a COM32/COM32R module
boot/syslinux/host.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu64.c32 : not a COM32/COM32R module
boot/syslinux/ifmemdsk.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/kbdmap.c32 : not a COM32/COM32R module
boot/syslinux/kontron_wdt.c32 : not a COM32/COM32R module
boot/syslinux/ldlinux.c32 : not a COM32/COM32R module
boot/syslinux/libcom32.c32 : not a COM32/COM32R module
boot/syslinux/libgpl.c32 : not a COM32/COM32R module
boot/syslinux/liblua.c32 : not a COM32/COM32R module
boot/syslinux/libmenu.c32 : not a COM32/COM32R module
boot/syslinux/libutil.c32 : not a COM32/COM32R module
boot/syslinux/linux.c32 : not a COM32/COM32R module
boot/syslinux/ls.c32 : not a COM32/COM32R module
boot/syslinux/lua.c32 : not a COM32/COM32R module
boot/syslinux/mboot.c32 : not a COM32/COM32R module
boot/syslinux/meminfo.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/pcitest.c32 : not a COM32/COM32R module
boot/syslinux/pmload.c32 : not a COM32/COM32R module
boot/syslinux/poweroff.c32 : not a COM32/COM32R module
boot/syslinux/prdhcp.c32 : not a COM32/COM32R module
boot/syslinux/pwd.c32 : not a COM32/COM32R module
boot/syslinux/pxechn.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/rosh.c32 : not a COM32/COM32R module
boot/syslinux/sanboot.c32 : not a COM32/COM32R module
boot/syslinux/sdi.c32 : not a COM32/COM32R module
boot/syslinux/sysdump.c32 : not a COM32/COM32R module
boot/syslinux/vesainfo.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
boot/syslinux/vpdtest.c32 : not a COM32/COM32R module
boot/syslinux/whichsys.c32 : not a COM32/COM32R module
boot/syslinux/zzjson.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
e7afbfbf4fa38a449a5b6213eb736c22
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
/dev/cdrom: open failed: No medium found
/dev/sdb: open failed: No medium found
No volume groups found
mdadm: No arrays found in config file or automatically
Any ideas?
Here's my grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
else
search --no-floppy --fs-uuid --set=root 16DC-8816
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Last edited by knowNothing23 (2013-12-30 00:17:02)Hi,
New to this forum, joined today in anticipation of trying an install of AL...For whatever this may be worth:
I have an HP Pavillion desktop that came with Windows 8 (now 8.1), & has, of course, a UEFI boot system. I tried earlier to install Ubuntu Studio (which I currently run) on the same disk as Windows (/dev/sda), I made (I believe) a huge mistake in trying to install as LVM/ext4... wiped out my Windows install & made the UEFI unavailable... I had to do a complete re-install of Windows (fortunately, I did the recommended system backup, using 4 DVD's!) so then I tried a (non LVM) install on an external usb 3.0, with the Grub 2 on the external disk (great access time, & it worked fine... IMO)...
One other item: as I have been trying to find the right flavor of Linux for my main purposes, I have been trying various distros. & having to try to learn to negotiate the UEFI, secure/legacy procedures (still learning)... As I was unsure of installing rEFind... I did down load the .iso, burn it to a CD...
http://www.rodsbooks.com/refind/getting.html
& in legacy mode, found that simply putting it (rEFind CD into the CD/DVD player, which in the UEFI it is labeled something like HP/UEFI CD/DVD), & then launching it, rEFind worked for some other distros...that is, I was able to boot into my Linux distros, even bypassing Grub), as well as having the option of booting Windows. It may seem trivial that I say this (it maybe is), but I have not seen anywhere (I have scoured the internet rather well) this mentioned as a possibility (though it, of course, would not make such a good permanent solution, especially for computers like mine that have only one CD/DVD player).
HenryP -
How to install Windows on a SATA boot drive
Here is how to install Windows XP on a SATA boot drive. This procedure was first developed by syar2003 and has been used by many iusers ncluding myself. Although it was originally developed for Neo2 mb's and Windows XP Pro, it has general applicability to systems as well.
1. Have only the SATA drive you want to be the boot drive active in your system. Disconnect the power to all other HDD's if any.
2. Have only one optical drive active. Disconnect the power to the other opticals if any. (Best to have a burner optical as master on IDE1.)
3. Plug SATA drive into SATA 1 on the mb. (it may show us as an IDE drive somewhere down the list in BIOS. That's okl)
4. Enable appropriate SATA options in BIOS. Set boot order to floppy, cd, SATA drive. Set boot priority to SATA drive.
5. Partition and format the SATA HDD using the utilites CD that came with the SATA drive. (If you don't have an HDD utilities disk, download one from the website of your HDD manufacturer.)
6. Run Windows setup. No need to load drivers at the F6 promt unless you are planning to do a RAID configuration.
7. Windows XP should install without incident.
8. After you are up and running, plug the power back into your other HDD and optical drives if any.
If you have a board older than the K8 series, it may be necessary to load the SATA drivers at the F6 prompt. If the above procedure does not work, than try it again loading the SATA drivers.
If this procedure does not work for you, it is likely that your particular SATA HDD has some compatablity problem with Windows setup and/or your motherboard. The solution to this is to try another SATA drive. In general, most failures using this procedure have been traced to certain WD, Seagate and Hitachi SATA drivers of smaller capacities. Fewer problems seem to have occured with Maxtor HDD's.Kaplan, from an earlier post of mine regarding sata2 hdds - I have them plugged into the sata1&2 ports, installed the nvidia raid first and then installed winxp (in both raid 0 and raid 1). My bios is 3.1 and its a known problem that bios 3.3 & 3.4 have nvidia raid problems but seems to be fixed in the beta bios 3.53:
I just purchased 2 hitachi deskstar sata2 80gb hdds ($60 each at zzf) and the interesting thing about them is that you have to "enable" sata2. I have been testing the performance of sata1, sata2, raid1 and raid0 and the results are below.
The drives themselves are factory default set at sata1. Since I purchased OEM, no software or instructions were included. I had to go to the hitachi website download section to download a dos based program (the features program) to enable sata2. After enabling the hdds to sata2, they were recognized in winxp in the nforce ADMA controller device driver and the screen reads with the primary channel as Serial ATA Generation 2 - 3G...and all 4 boxes below it are checked (the boxes enable bios select xfer mode, enable read caching, enable write caching and enable command queuing are checked). An interesting thing about the sata2 spec is that all sata2 hdds must come standard with NCQ...its not advertised on these 80 gb hdds on the hitachi website (unlike the larger hitachi sata2 hdds) but its a standard sata2 spec and these 80gb hitachi hdds are recoginized in winxp as sata2.
The other interesting feature about the hitachi sata2 hdds is setting them up to operate in an adjustable "performance" to "silence" mode. The hdds are default set at high perfromance but you can manually lower the performance to increase the silence of the hdds which is fully adjustable to your liking. I tested the highest silence/lowest performance setting and you cannot hear the hard drive at all.
Testing - I tested the 2 hitachi sata2 deskstars with the first result in sata1 mode, the second in sata2 mode, the third in raid1 mode and the fourth in raid0 mode.
First, a significant increase in raid0 over sata1, sata2 and raid1 with sequential reads and writes (PC Wizard).
Write: 28mb/s vs 29mb/s vs 27mb/s vs 53mb/s
Read: 45mb/s vs 46mb/s vs 43mb/s vs 83mb/s
Second, significant increase in sata 2, raid 1 & raid 0 over sata1 with buffered reads and writes (PC Wizard).
Write: 104mb/s vs 176mb/s vs 165mb/s vs 266mb/s
Read: 123mb/s vs 200mb/s vs 200mb/s vs 293mb/s
Third, significant increase in sata 2, raid 1 & raid 0 over sata1 with burst reads (HD Tach).
Burst Read: 133mb/s vs 225mb/s vs 219mb/s vs 334 mb/s
It is interesting to note that raid1 is better than sata1 but marginally slower in all tests over sata2. Raid0 is significantly faster on all tests.
Maybe you are looking for
-
White line in PDF Presentation
I have created a PDF Presentation in CS3 using 120 jpg images. An occasional page has a thin, white line across it, cutting through both text and image. Does anyone know what is causing this? I work on Mac G5 with OSX.
-
Print function is normal, but I don't know how to use the SCAN function. Is there any specific setting to do to activate the scanner function?
-
I have one exchange server with fourteen server databases. One these server databases is housing 15 mailbox databases (user mailboxes databases) of these fifteen mailbox DB's all have the same search problem in both the inbox and sent items. They all
-
Maximum number of File channels in PI system?
Hi Experts We are replacing a tool into PI system in my company, and because of this we have to create around 350 File (FTP to Unix Fileshare) Sender/Receiver channels. Already there are 100+ File channels running in production system. Is there a lim
-
Discoverer 11g - How to get Sales Data in different periods?
Good afternoon, I am currently using Discoverer 4.1 and I can run reports that display all of these different types of sales. I have a Cross tab and I want 5 columns showing the Sales below. 2013 Month Sales, 2013 YTD Sales, 2012 Month Sales, 2012 YT