Changing yellow wall to white in FCP 7

I am editing a clip of a close up of my face. My face only fills half the screen as I intended. But unfortunately the viewfinder on the camera did not show that it had included a portion of one of my yellow walls in my flat. So half of the background is off-white and there is a yellow strip.
How would I get rid of this yellow strip and make it the same colour as the white wall? I was thinking colour corrector 3-way but not sure how I would go about doing this.
Any help much appreciated, thanks.

you can limit the area the three-way color correct filter effects.  It's at the bottom of the visual tab.  click on the arrow at the bottom left to open the limit effect area.  click on the eyedropper and click on a yellow portion of the image.  You can adjust the luminance, saturation and hue areas effected.  If you click on the filters tab, you can display the matte which will show you the area you are selecting.
The manual's probably got a more thorough explanation.

Similar Messages

  • How can i connect my apple tv 2 to an rca entrance with yellow red and whit

    i need to connect my apple tv to a yellow red and white entrance can anybody help me?

    Winston Churchill wrote:
    Such converters would need to be HDCP compliant and if your TV is not widescreen they would also need to incorporate a scaler. I know of no such device that incorporates both technologies and posting details of devices that can circumvent copy protection (HDCP) are not permitted under the terms of use for these communities.
    my tv is a widescreen HDTV. it has a DVI-D port and RCA red and white audio inputs. i can purchase a HDMI to DVI-D cable. the only issue that i have to sort out is the audio. so, what converter do i need to convert from digital audio to analog?

  • How do I change background color to white when looking at single image?

    I know I can go to 'preferences' and choose white backgrounds but this changes only the background of the page that shows all my photos together. If I select one photo to view, the background turns to black again - as it does if I view an image at screen size. Can I change these backgrounds to white? I think black ***** the life out of images and makes them appear smaller and would prefer to always see my images against white, as in a book. Since I work with images and colours this is very important to me.

    As I’m sure you recall from your careful reading of the Terms of Service you agreed to when you joined the Apple Discussions, this is a User to User forum. Apple aren’t here. They don’t promise to read anything here. If you want to ask Apple something you’ll need to do it elsewhere.
    Regards
    TD

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • Using footage from my iPhone 4, how can I remove the black bars on the sides of my picture? Or change the color to white...

    My footage is vertical and there are two black bars on the side filling in the rest of the picture. I want to imbed this into PowerPoint without the black bars on the side. Any suggestions on how I can remove them or at least change the color to white? I changed the background color in View > Background > White, but it was only for editing purposes and didn't keep the color after rendering.

    To change the background to white, in FCE, place the video on track V2 and place a color matte generator on track V1.  The default color for the color matte is grey so you'll need to change it to white using the color picker.
    -DH

  • New icon on screen - yellow circle with white lines with a 1 next to it - what is it please?

    Hi.
    New to hear so please bear with me..
    i have had my blackberry for about a month and a new icon has appeared (next to where the message icon normally sits). It shows a '1' next to a yellow circle with white lines through it.. I have a feeling it is to do with email but dont know what it is or how to get rid of it... i have no new messages waiting to be read ...
    your help would be much appreicated.
    Regards
    Sutton237
    Solved!
    Go to Solution.

    Check your WAP or Browser push messages.
    Messages folder > Options > View Folders, then look in both your WAP push and Browser push folders.
    Read and clear the message.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why is my Macbook pro display text background yellow instead of white?

    Why is my Macbook pro display text background yellow instead of white? This problem is intermitten and when it occurs the yellow tint flickers.

    Same my Mac book pro problem please solved My MacBook Pro went to sleep mode (I used Energy Saver, let my MacBook Pro to sleep mode when inactive for 2 minutes). I rubbed TrackPad to let MacBook Pro awake. But I was shocked that my screen is mirrored (Look fourth photo). So I put MacBook Pro to sleep mode again and awake it, display appeared (Look fifth photo). So I turned off and turned on, display appeared (Look sixth photo). I turned off five times and turned on five times, display appear normal screen size.
    I didn't use MacBook Pro for 2 days until today, I want install The Sims 3 World Adventure, Fast Lane Stuff and High-End Tech. I just turn on my MacBook Pro, display appeared (First to third photos). I tried same method as 22 June, but still never work as normal display. How can I fix it?
    MacBook Pro 13" Late 2011
    2.4GHz i5
    4GB
    500GB HDD
    Thanks for help me.

  • How can I make multiple pictures slowly fade to white in FCP X ?

    I am new to FCP X and I'm creating a picture slideshow.  How can I make multiple pictures slowly fade to white in FCP X ?
    For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
    Can anyone help ?

    Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

  • Will changes made to the white balance of my .mts files made in Lightroom

    Will changes made to the white balance of my .mts files made in Lightroom be transferred with the file when I open in Premier Elements

    If the changes have been applied and output as a final file, then yes. But if you're just  editing the file in Lightroom and you haven't saved the finished file, no.

  • My desktop folder titles have changed from black to white

    Since upgrading to Yosemite my desktop folder titles have changed from black to white.
    I have searched system Preferences, to no avail. How can I change the colour of the titles?
    DaveC

    All my desktop folder and file titles are white as well. This is a normal.

  • Is it possible to mass change desktop wall paper for all users using WGM?

    is it possible to mass change desktop wall paper for all users using WGM?

    yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

  • Color changes when translucent on white

    I am trying to overlap multiple translucent colored objects, and I need them to have a white object behind them so I can overlap other objects in the background. Anyway, when I reduce the opacity on the colors, they change hue. Any way I can prevent this? See image example:
    This is a standard white rectangle with default white fill and black stroke, and a red square above it, with %30 opacity. The red should look like the pink outside of the overlapping area, why is it changing color over a white object?

    This is fixed with the overprint preview turned on. So, why does it have to be this way?

  • Yosemite load bar color changes / from black to white

    Hello there,
    is anyone experiencing the same as me?
    When booting my MacBook Pro Retina Mid 2012 the load bar color changes from black to white. The color change happens as the keyboard background lights turn on. After this I get to the login screen with the blurred desktop background image (seems normal)
    Video: https://vid.me/hOX
    (sorry for the vertical video)
    I know that the load bar is a feature of Yosemite, but not with the color changes.
    I did a clean install of OS X Yosemite with the AppStore download and the Diskmaker X Tool.
    Thanks for answers...

    No
    With a very advanced photo editor like PhotoShop and lots of skill you could do that
    It is certainly not a simple operation if it is just a B&W image with no color information
    LN

  • When I download a PDF, a user manual for instance, the page is black and the font is green, how do I change this to a white page and black script?

    When I download a PDF, a user manual for instance, the page is black and the font is green, how do I change this to a white page and black script?

    Try opening it with Adobe Acrobat Reader. 
    Note: Appleworks is the Apple office like application that stopped being able to run with Mac OS X 10.6.8.  If you have a question particular to 10.9, I would ask in the 10.9 (OS X Mavericks) forum.

  • My ipod is smashed and i need to get a new screen, my ipod is currently black, when i get my screen fixed would i be able to change it into a white one?

    My ipod is smashed and i need to get a new screen, my ipod is currently black, when i get my screen fixed would i be able to change it into a white one? and if so how much would it cost?

    First: Apple does not replace screens or repair mobile devices in any way. They will replace the device.
    Second: No. You will get the same model you had before.

Maybe you are looking for

  • The simplest way for plsql procedure to return multiple rows

    Hi, What is the simplest way for plsql procedure to return multiple rows (records). There are many combination of ways to do it but I am looking for a solution that is appropriate for plsql beginners. Many solutions use cursors, cursor variables, col

  • Windows and itunes not recognising my ipod video

    I bought my ipod video 30gb last thursday and i managed to get it working and downloade my songs to it. Now it is not recommended by windows, itunes or the device manager what can i do?

  • SAP R/3 4.7 BSP call Crystal Report on BOBJ XI 3.1.

    Hi there, I was hoping somebody could give me the high level steps to call a Crystal Report from a BSP (the data source for Crystal is from the R/3 4.7 server) and then have the Crystal Report shown in the BSP session. And, would it possible to have

  • Error reconciling AD Lookups OIM 11g IBM JDK 6 64 bit

    Hi, I'm setting up SSL from OIM 11g to AD 2008, my environment is OIM 11g+ Weblogic 10.3.3 generic on IBM AIX 6.1 + IBM JDK 6 64 bit. I imported the certificate as described in AD connector documentation with "keytool". I'm getting the following ERRO

  • Plz help , getting error in my java code

    Can any one tell the reason for this error: Exception in thread "main" java.lang.OutOfMemoryError: Java heap space is there any size limit for java classes that I am using in my code? My code Looks like:      FileChannel in = null, out = null;      t